Merge branch 'master' into dev

platformio.ini

@@ -314,3 +314,10 @@ src_filter = ${env.src_filter} -<esp32/> -<nimble/> -<nrf52/> -<meshwifi/>
 build_flags = ${arduino_base.build_flags} -O0
 framework = arduino
 board = linux_x86_64
+
+; The GenieBlocks LORA prototype board
+[env:genieblocks_lora]
+extends = esp32_base
+board = genieblocks_lora
+build_flags = 
+  ${esp32_base.build_flags} -D GENIEBLOCKS

src/configuration.h

@@ -338,6 +338,35 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LORA_DIO1 35 // Not really used
 #define LORA_DIO2 34 // Not really used
 
+#elif defined(GENIEBLOCKS)
+// This string must exactly match the case used in release file names or the android updater won't work
+#define HW_VENDOR "genieblocks"
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 5
+#define GPS_TX_PIN 18
+#define GPS_RESET_N 10
+#define GPS_EXTINT 23 // On MAX-M8 module pin name is EXTINT. On L70 module pin name is STANDBY.
+
+#define BATTERY_PIN 39 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_EN_PIN 14 // Voltage voltage divider enable pin connected to mosfet
+
+#define I2C_SDA 4 // I2C pins for this board
+#define I2C_SCL 2
+
+#define LED_PIN 12     // If defined we will blink this LED
+//#define BUTTON_PIN 36  // If defined, this will be used for user button presses (ToDo problem on that line on debug screen -->   Long press start!)
+//#define BUTTON_NEED_PULLUP //GPIOs 34 to 39 are GPIs – input only pins. These pins don’t have internal pull-ups or pull-down resistors. 
+
+#define USE_RF95
+#define LORA_DIO0 38 // a No connect on the SX1262 module
+#define LORA_RESET 9
+
+#define RF95_SCK 22
+#define RF95_MISO 19
+#define RF95_MOSI 13
+#define RF95_NSS 21
+
 #endif
 
 #ifdef ARDUINO_NRF52840_PCA10056

src/graphics/Screen.cpp

@@ -27,6 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "NodeDB.h"
 #include "Screen.h"
 #include "configuration.h"
+#include "fonts.h"
 #include "graphics/images.h"
 #include "main.h"
 #include "mesh-pb-constants.h"
@@ -34,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "plugins/TextMessagePlugin.h"
 #include "target_specific.h"
 #include "utils.h"
-#include "fonts.h"
 
 using namespace meshtastic; /** @todo remove */
 
@@ -177,7 +177,6 @@ static void drawCriticalFaultFrame(OLEDDisplay *display, OLEDDisplayUiState *sta
     display->drawString(0 + x, FONT_HEIGHT_MEDIUM + y, "For help, please post on\nmeshtastic.discourse.group");
 }
 
-
 /// Draw the last text message we received
 static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -316,7 +315,7 @@ static void drawGPS(OLEDDisplay *display, int16_t x, int16_t y, const GPSStatus
         display->drawFastImage(x + 24, y, 8, 8, imgSatellite);
 
         // Draw the number of satellites
-        sprintf(satsString, "%lu", gps->getNumSatellites());
+        sprintf(satsString, "%u", gps->getNumSatellites());
         display->drawString(x + 34, y - 2, satsString);
     }
 }
@@ -569,11 +568,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     uint32_t agoSecs = sinceLastSeen(node);
     static char lastStr[20];
     if (agoSecs < 120) // last 2 mins?
-        snprintf(lastStr, sizeof(lastStr), "%lu seconds ago", agoSecs);
+        snprintf(lastStr, sizeof(lastStr), "%u seconds ago", agoSecs);
     else if (agoSecs < 120 * 60) // last 2 hrs
-        snprintf(lastStr, sizeof(lastStr), "%lu minutes ago", agoSecs / 60);
+        snprintf(lastStr, sizeof(lastStr), "%u minutes ago", agoSecs / 60);
     else
-        snprintf(lastStr, sizeof(lastStr), "%lu hours ago", agoSecs / 60 / 60);
+        snprintf(lastStr, sizeof(lastStr), "%u hours ago", agoSecs / 60 / 60);
 
     static char distStr[20];
     strcpy(distStr, "? km"); // might not have location data
@@ -924,18 +923,19 @@ void Screen::handleStartBluetoothPinScreen(uint32_t pin)
     setFastFramerate();
 }
 
-void Screen::blink() {
+void Screen::blink()
+{
     setFastFramerate();
     uint8_t count = 10;
     dispdev.setBrightness(254);
-    while(count>0) {
+    while (count > 0) {
         dispdev.fillRect(0, 0, SCREEN_WIDTH, SCREEN_HEIGHT);
         dispdev.display();
         delay(50);
         dispdev.clear();
         dispdev.display();
         delay(50);
-        count = count -1;
+        count = count - 1;
     }
     dispdev.setBrightness(brightness);
 }
@@ -1060,11 +1060,13 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
     if (WiFi.status() == WL_CONNECTED || isSoftAPForced() || radioConfig.preferences.wifi_ap_mode) {
         if (radioConfig.preferences.wifi_ap_mode || isSoftAPForced()) {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.softAPIP().toString().c_str()));
+
+            // Number of connections to the AP. Default mmax for the esp32 is 4
+            display->drawString(x + SCREEN_WIDTH - display->getStringWidth("(" + String(WiFi.softAPgetStationNum()) + "/4)"),
+                                y + FONT_HEIGHT_SMALL * 1, "(" + String(WiFi.softAPgetStationNum()) + "/4)");
         } else {
             display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "IP: " + String(WiFi.localIP().toString().c_str()));
         }
-        display->drawString(x + SCREEN_WIDTH - display->getStringWidth("(" + String(WiFi.softAPgetStationNum()) + "/4)"),
-                            y + FONT_HEIGHT_SMALL * 1, "(" + String(WiFi.softAPgetStationNum()) + "/4)");
 
     } else if (WiFi.status() == WL_NO_SSID_AVAIL) {
         display->drawString(x, y + FONT_HEIGHT_SMALL * 1, "SSID Not Found");

src/main.cpp

@@ -389,6 +389,19 @@ void setup()
 
     readFromRTC(); // read the main CPU RTC at first (in case we can't get GPS time)
 
+#ifdef GENIEBLOCKS
+    //gps setup
+    pinMode (GPS_RESET_N, OUTPUT);
+    pinMode(GPS_EXTINT, OUTPUT);
+    digitalWrite(GPS_RESET_N, HIGH);
+    digitalWrite(GPS_EXTINT, LOW);
+    //battery setup
+    // If we want to read battery level, we need to set BATTERY_EN_PIN pin to low.
+    // ToDo: For low power consumption after read battery level, set that pin to high.
+    pinMode (BATTERY_EN_PIN, OUTPUT);
+    digitalWrite(BATTERY_EN_PIN, LOW);
+#endif
+
     // If we don't have bidirectional comms, we can't even try talking to UBLOX
     UBloxGPS *ublox = NULL;
 #ifdef GPS_TX_PIN