sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność

Add SX1262 to @BigCorvus board

1.2-legacy
geeksville 2020-08-16 14:20:05 -07:00
rodzic 559a790286
commit 67bad9a689
2 zmienionych plików z 37 dodań i 36 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

28
variants/lora_relay_v1/variant.cpp
Wyświetl plik

@ -39,16 +39,16 @@ const uint32_t g_ADigitalPinMap[] = {
6, // D11 is P0.06 D_RES (IPS display reset)
8, // D12 is P0.08 D_CS (IPS display chip select)
41, // D13 is P1.09 BLT (IPS display backlight)
4, // D14 is P0.04 SX1262 RXEN
// D14 .. D21 (aka A0 .. A7)
4, // D14 is P0.04 (A0)
5, // D15 is P0.05 (A1)
30, // D16 is P0.30 (A2)
28, // D17 is P0.28 (A3)
2, // D18 is P0.02 (A4)
3, // D19 is P0.03 (A5)
29, // D20 is P0.29 (A6, Battery)
31, // D21 is P0.31 (A7, ARef)
5, // D15 is P0.05 (A0)
30, // D16 is P0.30 (A1)
28, // D17 is P0.28 (A2)
2, // D18 is P0.02 (A3)
3, // D19 is P0.03 (A4)
29, // D20 is P0.29 (A5, Battery)
31, // D21 is P0.31 (A6, ARef)
// D22 .. D23 (aka I2C pins)
12, // D22 is P0.12 (SDA)
@ -77,19 +77,19 @@ const uint32_t g_ADigitalPinMap[] = {
// 32, // P1.00 is SWO (attached to debug header)
// D29-D43
27, // P0.27 E22-SX1262 DIO1
28, // P0.28 E22-SX1262 DIO2
30, // P0.30 E22-SX1262 TXEN
27, // D29 P0.27 E22-SX1262 DIO1
28, // D30 P0.28 E22-SX1262 DIO2
30, // D31 P0.30 E22-SX1262 TXEN
35, // D32 P1.03 E22-SX1262 NSS
32 + 8, // D33 P1.08 E22-SX1262 BUSY
32 + 12, // D34 P1.12 E22-SX1262 RESET
32 + 1, // P1.01 BTN_UP
32 + 2, // P1.02 SWITCH
35, // P1.03 E22-SX1262 NSS
36, // P1.04 is not connected per schematic
37, // P1.05 is not connected per schematic
38, // P1.06 is not connected per schematic
39, // P1.07 is not connected per schematic
32 + 8, // P1.08 E22-SX1262 BUSY
43, // P1.11 is not connected per schematic
32 + 12, // P1.12 E22-SX1262 RESET
45, // P1.13 is not connected per schematic
46, // P1.14 is not connected per schematic
};

45
variants/lora_relay_v1/variant.h
Wyświetl plik

@ -38,7 +38,7 @@ extern "C" {
// Number of pins defined in PinDescription array
#define PINS_COUNT (43)
#define NUM_DIGITAL_PINS (43)
#define NUM_ANALOG_INPUTS (8) // A6 is used for battery, A7 is analog reference
#define NUM_ANALOG_INPUTS (7) // A6 is used for battery, A7 is analog reference
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
@ -62,14 +62,13 @@ extern "C" {
/*
* Analog pins
*/
#define PIN_A0 (14)
#define PIN_A1 (15)
#define PIN_A2 (16)
#define PIN_A3 (17)
#define PIN_A4 (18)
#define PIN_A5 (19)
#define PIN_A6 (20)
#define PIN_A7 (21)
#define PIN_A0 (15)
#define PIN_A1 (16)
#define PIN_A2 (17)
#define PIN_A3 (18)
#define PIN_A4 (19)
#define PIN_A5 (20)
#define PIN_A6 (21)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
@ -78,12 +77,12 @@ static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
// static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF PIN_A7
#define PIN_VBAT PIN_A6
#define PIN_AREF PIN_A6
#define PIN_VBAT PIN_A5
#define PIN_NFC1 (33)
#define PIN_NFC2 (2)
@ -117,17 +116,19 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define PIN_WIRE_SDA (22)
#define PIN_WIRE_SCL (23)
// QSPI Pins
//#define PIN_QSPI_SCK 27
//#define PIN_QSPI_CS 28
//#define PIN_QSPI_IO0 29
//#define PIN_QSPI_IO1 30
//#define PIN_QSPI_IO2 31
//#define PIN_QSPI_IO3 32
// I2C device addresses
#define I2C_ADDR_BQ27441 0x55 // Battery gauge
// On-board QSPI Flash
//#define EXTERNAL_FLASH_DEVICES GD25Q16C
//#define EXTERNAL_FLASH_USE_QSPI
// CUSTOM GPIOs the SX1262
#define SX1262_CS (32)
#define SX1262_DIO1 (29)
#define SX1262_DIO2 (30)
#define SX1262_BUSY (33) // Supposed to be P0.18 but because of reworks, now on P0.31 (18)
#define SX1262_RESET (34)
// #define SX1262_ANT_SW (32 + 10)
#define SX1262_RXEN (14)
#define SX1262_TXEN (31)
#define SX1262_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#ifdef __cplusplus
}