Merge pull request #280 from aHVzY2g/master

fix #272 add support for tlora-v2-1-1.6

platformio.ini

@@ -115,18 +115,24 @@ build_flags =
 extends = esp32_base
 board = heltec_wifi_lora_32_V2
 
-[env:ttgo-lora32-v1]
+[env:tlora-v1]
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
-  ${esp32_base.build_flags} -D TTGO_LORA_V1
+  ${esp32_base.build_flags} -D TLORA_V1
 
 ; note: the platformio definition for lora32-v2 seems stale, it is missing a pins_arduino.h file, therefore I don't think it works
-[env:ttgo-lora32-v2]
+[env:tlora-v2]
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
-  ${esp32_base.build_flags} -D TTGO_LORA_V2
+  ${esp32_base.build_flags} -D TLORA_V2
+
+[env:tlora-v2-1-1.6]
+extends = esp32_base
+board = ttgo-lora32-v1
+build_flags = 
+  ${esp32_base.build_flags} -D TLORA_V2_1_16
 
 ; The Heltec Cubecell plus 
 ; IMPORTANT NOTE: This target doesn't yet work and probably won't ever work.  I'm keeping it around for now.

src/configuration.h

@@ -211,9 +211,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RF95_IRQ_GPIO 26
 #define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
-#elif defined(TTGO_LORA_V1)
+#elif defined(TLORA_V1)
 // This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR "ttgo-lora32-v1"
+#define HW_VENDOR "tlora-v1"
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 #define GPS_RX_PIN 36
@@ -232,9 +232,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
 #define DIO1_GPIO 35     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
-#elif defined(TTGO_LORA_V2)
+#elif defined(TLORA_V2)
 // This string must exactly match the case used in release file names or the android updater won't work
-#define HW_VENDOR "ttgo-lora32-v2"
+#define HW_VENDOR "tlora-v2"
 
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
@@ -248,14 +248,35 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
 #define LED_PIN 25     // If defined we will blink this LED
-#define BUTTON_PIN                                                                                                               \
-    0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
-// between this pin and ground
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one between this pin and ground
 
 #define RESET_GPIO 14    // If defined, this pin will be used to reset the LORA radio
 #define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
 #define DIO1_GPIO 35     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #define DIO2_GPIO 34     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+
+#elif defined(TLORA_V2_1_16)
+// This string must exactly match the case used in release file names or the android updater won't work
+#define HW_VENDOR "tlora-v2-1-1.6"
+
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 36
+#define GPS_TX_PIN 39 
+
+#define I2C_SDA 21 // I2C pins for this board
+#define I2C_SCL 22
+
+#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
+
+#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
+#define LED_PIN 25     // If defined we will blink this LED
+#define BUTTON_PIN 12 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one between this pin and ground
+
+#define RESET_GPIO 23    // If defined, this pin will be used to reset the LORA radio
+#define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
+#define DIO1_GPIO 35     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
+#define DIO2_GPIO 34     // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
 #endif
 
 #ifdef ARDUINO_NRF52840_PCA10056