sforkowany z mirror/meshtastic-firmware
allow heltec boards to boot without i2c when jtag debugging
rodzic
f2a731c22d
commit
4a40b9499b
9
TODO.md
9
TODO.md
|
@ -1,8 +1,7 @@
|
|||
# High priority
|
||||
|
||||
* implement new ble characteristics
|
||||
* have MeshService keep a node DB by sniffing user messages
|
||||
* figure out why protobuf reads of Owner fail - possibly related to having the wrong number of chracterstics exported over bluetooth
|
||||
* implement regen user and radio prefs
|
||||
* figure out why protobuf reads of Owner fail - debug with jtag
|
||||
* have meshservice send location data on mesh (if device has a GPS)
|
||||
* implement getCurrentTime() - set based off gps but then updated locally
|
||||
* confirm second device receives that gps message and updates device db
|
||||
|
@ -64,4 +63,6 @@ until the phone pulls those packets. Ever so often power on bluetooth just so w
|
|||
* make message receive from radio go through to android
|
||||
* test loopback tx/rx path code without using radio
|
||||
* notify phone when rx packets arrive, currently the phone polls at startup only
|
||||
* figure out if we can use PA_BOOST - yes, it seems to be on both boards
|
||||
* figure out if we can use PA_BOOST - yes, it seems to be on both boards
|
||||
* implement new ble characteristics
|
||||
* have MeshService keep a node DB by sniffing user messages
|
|
@ -24,12 +24,12 @@ build_flags = -Wall -Wextra -Wno-missing-field-initializers -ggdb -O3 -Wl,-Map,.
|
|||
; -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
|
||||
|
||||
upload_speed = 921600
|
||||
upload_port = /dev/ttyUSB0
|
||||
;upload_port = /dev/ttyUSB1
|
||||
|
||||
; the default is esptool
|
||||
; upload_protocol = esp-prog
|
||||
|
||||
; monitor_port = /dev/ttyUSB0
|
||||
;monitor_port = /dev/ttyUSB1
|
||||
monitor_speed = 115200
|
||||
|
||||
# debug_tool = esp-prog
|
||||
|
@ -46,4 +46,5 @@ lib_deps =
|
|||
TinyGPSPlus
|
||||
ESP8266_SSD1306
|
||||
AXP202X_Library
|
||||
SPI
|
||||
SPI
|
||||
Wire ; explicitly needed here because the AXP202 library forgets to add it
|
|
@ -122,7 +122,6 @@ static ProtobufCharacteristic
|
|||
meshMyNodeCharacteristic("ea9f3f82-8dc4-4733-9452-1f6da28892a2", BLECharacteristic::PROPERTY_READ, MyNodeInfo_fields, &myNodeInfo);
|
||||
|
||||
static OwnerCharacteristic meshOwnerCharacteristic;
|
||||
|
||||
static RadioCharacteristic meshRadioCharacteristic;
|
||||
|
||||
/**
|
||||
|
@ -170,7 +169,7 @@ class BluetoothMeshCallbacks : public BLECharacteristicCallbacks
|
|||
}
|
||||
else
|
||||
{
|
||||
assert(0); // fixme not yet implemented
|
||||
// we are uninterested in the other reads
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -185,7 +184,7 @@ class BluetoothMeshCallbacks : public BLECharacteristicCallbacks
|
|||
}
|
||||
else
|
||||
{
|
||||
assert(0); // Not yet implemented
|
||||
// we are uninterested in the other writes
|
||||
}
|
||||
}
|
||||
};
|
||||
|
@ -250,8 +249,8 @@ A variable keepAllPackets, if set to true will suppress this behavior and instea
|
|||
*/
|
||||
BLEService *createMeshBluetoothService(BLEServer *server)
|
||||
{
|
||||
// Create the BLE Service
|
||||
BLEService *service = server->createService("6ba1b218-15a8-461f-9fa8-5dcae273eafd");
|
||||
// Create the BLE Service, we need more than the default of 15 handles
|
||||
BLEService *service = server->createService(BLEUUID("6ba1b218-15a8-461f-9fa8-5dcae273eafd"), 25, 0);
|
||||
|
||||
addWithDesc(service, &meshFromRadioCharacteristic, "fromRadio");
|
||||
addWithDesc(service, &meshToRadioCharacteristic, "toRadio");
|
||||
|
@ -271,5 +270,8 @@ BLEService *createMeshBluetoothService(BLEServer *server)
|
|||
service->start();
|
||||
server->getAdvertising()->addServiceUUID(service->getUUID());
|
||||
|
||||
Serial.println("*** Mesh service:");
|
||||
service->dump();
|
||||
|
||||
return service;
|
||||
}
|
||||
|
|
|
@ -37,7 +37,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
// -----------------------------------------------------------------------------
|
||||
|
||||
// Select which T-Beam board is being used. Only uncomment one.
|
||||
// #define T_BEAM_V10 // AKA Rev1 (second board released)
|
||||
//#define T_BEAM_V10 // AKA Rev1 (second board released)
|
||||
#define HELTEC_LORA32
|
||||
|
||||
// If we are using the JTAG port for debugging, some pins must be left free for that (and things like GPS have to be disabled)
|
||||
|
@ -115,8 +115,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#elif defined(HELTEC_LORA32)
|
||||
#define HW_VENDOR "Heltec"
|
||||
|
||||
#ifndef USE_JTAG // gpio15 is TDO for JTAG, so no I2C on this board while doing jtag
|
||||
#define I2C_SDA 4
|
||||
#define I2C_SCL 15
|
||||
#endif
|
||||
|
||||
#define RESET_OLED 16
|
||||
|
||||
|
|
32
src/main.ino
32
src/main.ino
|
@ -83,7 +83,7 @@ void doDeepSleep(uint64_t msecToWake)
|
|||
|
||||
// No need to turn this off if the power draw in sleep mode really is just 0.2uA and turning it off would
|
||||
// leave floating input for the IRQ line
|
||||
|
||||
|
||||
// If we want to leave the radio receving in would be 11.5mA current draw, but most of the time it is just waiting
|
||||
// in its sequencer (true?) so the average power draw should be much lower even if we were listinging for packets
|
||||
// all the time.
|
||||
|
@ -107,16 +107,19 @@ void doDeepSleep(uint64_t msecToWake)
|
|||
|
||||
Note: we don't isolate pins that are used for the LORA, LED, i2c, spi or the wake button
|
||||
*/
|
||||
static const uint8_t rtcGpios[] = { /* 0, */ 2,
|
||||
/* 4, */ 12,13, /* 14, */ /* 15, */
|
||||
/* 25, */ 26, /* 27, */
|
||||
32,33,34,35,36,37,/* 38, */ 39 };
|
||||
static const uint8_t rtcGpios[] = {/* 0, */ 2,
|
||||
/* 4, */
|
||||
#ifndef USE_JTAG
|
||||
12, 13, /* 14, */ /* 15, */
|
||||
#endif
|
||||
/* 25, */ 26, /* 27, */
|
||||
32, 33, 34, 35, 36, 37, /* 38, */ 39};
|
||||
|
||||
for(int i = 0; i < sizeof(rtcGpios); i++)
|
||||
rtc_gpio_isolate((gpio_num_t) rtcGpios[i]);
|
||||
for (int i = 0; i < sizeof(rtcGpios); i++)
|
||||
rtc_gpio_isolate((gpio_num_t)rtcGpios[i]);
|
||||
|
||||
// FIXME, disable internal rtc pullups/pulldowns on the non isolated pins. for inputs that we aren't using
|
||||
// to detect wake and in normal operation the external part drives them hard.
|
||||
// FIXME, disable internal rtc pullups/pulldowns on the non isolated pins. for inputs that we aren't using
|
||||
// to detect wake and in normal operation the external part drives them hard.
|
||||
|
||||
// FIXME - use an external 10k pulldown so we can leave the RTC peripherals powered off
|
||||
// until then we need the following lines
|
||||
|
@ -252,7 +255,7 @@ void axp192Init()
|
|||
Serial.printf("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
|
||||
|
||||
axp.debugCharging();
|
||||
|
||||
|
||||
pinMode(PMU_IRQ, INPUT_PULLUP);
|
||||
attachInterrupt(PMU_IRQ, [] {
|
||||
pmu_irq = true;
|
||||
|
@ -291,7 +294,6 @@ void initDeepSleep()
|
|||
Serial.printf("booted, wake cause %d (boot count %d)\n", wakeCause, bootCount);
|
||||
}
|
||||
|
||||
|
||||
const char *getDeviceName()
|
||||
{
|
||||
uint8_t dmac[6];
|
||||
|
@ -299,11 +301,10 @@ const char *getDeviceName()
|
|||
|
||||
// Meshtastic_ab3c
|
||||
static char name[20];
|
||||
sprintf(name, "Meshtastic_%02x%02x", dmac[4], dmac[5]);
|
||||
sprintf(name, "Meshtastic_%02x%02x", dmac[4], dmac[5]);
|
||||
return name;
|
||||
}
|
||||
|
||||
|
||||
void setup()
|
||||
{
|
||||
// Debug
|
||||
|
@ -324,8 +325,10 @@ void setup()
|
|||
digitalWrite(RESET_OLED, 1);
|
||||
#endif
|
||||
|
||||
#ifdef I2C_SDA
|
||||
Wire.begin(I2C_SDA, I2C_SCL);
|
||||
scanI2Cdevice();
|
||||
#endif
|
||||
|
||||
axp192Init();
|
||||
|
||||
|
@ -381,7 +384,8 @@ void loop()
|
|||
#endif
|
||||
|
||||
#ifdef T_BEAM_V10
|
||||
if(axp192_found) {
|
||||
if (axp192_found)
|
||||
{
|
||||
// blink the axp led
|
||||
axp.setChgLEDMode(ledon ? AXP20X_LED_LOW_LEVEL : AXP20X_LED_OFF);
|
||||
}
|
||||
|
|
|
@ -109,6 +109,7 @@ void screen_update() {
|
|||
}
|
||||
|
||||
void screen_setup() {
|
||||
#ifdef I2C_SDA
|
||||
// Display instance
|
||||
display = new SSD1306Wire(SSD1306_ADDRESS, I2C_SDA, I2C_SCL);
|
||||
display->init();
|
||||
|
@ -117,6 +118,7 @@ void screen_setup() {
|
|||
|
||||
// Scroll buffer
|
||||
display->setLogBuffer(5, 30);
|
||||
#endif
|
||||
}
|
||||
|
||||
void screen_loop() {
|
||||
|
|
Ładowanie…
Reference in New Issue