Merge branch 'master' of github.com:meshtastic/Meshtastic-device

.github/workflows/main_matrix.yml

@@ -38,6 +38,7 @@ jobs:
           - board: rak4631_eink
           - board: t-echo
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
           
@@ -95,6 +96,7 @@ jobs:
           - board: tbeam0.7
           - board: meshtastic-diy-v1
           - board: nano-g1
+          - board: station-g1
           - board: m5stack-core
           - board: m5stack-coreink
 

bin/build-all.sh

@@ -5,7 +5,7 @@ set -e
 VERSION=`bin/buildinfo.py long`
 SHORT_VERSION=`bin/buildinfo.py short`
 
-BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 m5stack-core m5stack-coreink"
+BOARDS_ESP32="rak11200 tlora-v2 tlora-v1 tlora_v1_3 tlora-v2-1-1.6 tbeam heltec-v1 heltec-v2.0 heltec-v2.1 tbeam0.7 meshtastic-diy-v1 nano-g1 station-g1 m5stack-core m5stack-coreink"
 #BOARDS_ESP32=tbeam
 
 # FIXME note nrf52840dk build is for some reason only generating a BIN file but not a HEX file nrf52840dk-geeksville is fine

protobufs

@@ -1 +1 @@
-Subproject commit 11d94c9b15e9085b0f2516735ad816a3a35d5680
+Subproject commit 59293c211a7db32e76a0815f6dac43899eba16dd

src/esp32/architecture.h

@@ -70,6 +70,8 @@
     #define HW_VENDOR HardwareModel_NANO_G1
 #elif defined(M5STACK)
     #define HW_VENDOR HardwareModel_M5STACK
+#elif defined(STATION_G1)
+    #define HW_VENDOR HardwareModel_STATION_G1
 #endif
 
 //

src/gps/GPS.cpp

@@ -330,7 +330,7 @@ int32_t GPS::runOnce()
         if(devicestate.did_gps_reset && (millis() > 60000) && !hasFlow()) {
             DEBUG_MSG("GPS is not communicating, trying factory reset on next bootup.\n");
             devicestate.did_gps_reset = false;
-            nodeDB.saveToDisk();
+            nodeDB.saveDeviceStateToDisk();
         }
 #endif
     }

src/mesh/NodeDB.cpp

@@ -435,6 +435,16 @@ void NodeDB::saveChannelsToDisk()
     }
 }
 
+void NodeDB::saveDeviceStateToDisk() 
+{
+    if (!devicestate.no_save) {
+#ifdef FSCom
+        FSCom.mkdir("/prefs");
+#endif
+        saveProto(prefFileName, DeviceState_size, sizeof(devicestate), DeviceState_fields, &devicestate);
+    }
+}
+
 void NodeDB::saveToDisk()
 {
     if (!devicestate.no_save) {

src/mesh/NodeDB.h

@@ -44,7 +44,7 @@ class NodeDB
     void init();
 
     /// write to flash
-    void saveToDisk(), saveChannelsToDisk();
+    void saveToDisk(), saveChannelsToDisk(), saveDeviceStateToDisk();
 
     /** Reinit radio config if needed, because either:
      * a) sometimes a buggy android app might send us bogus settings or

src/mesh/generated/mesh.pb.h

@@ -71,6 +71,8 @@ typedef enum _HardwareModel {
     HardwareModel_DR_DEV = 43, 
     /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
     HardwareModel_M5STACK = 44, 
+    /* B&Q Consulting Station Edition G1: https://uniteng.com/wiki/doku.php?id=meshtastic:station */
+    HardwareModel_STATION_G1 = 45, 
     /* Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. */
     HardwareModel_PRIVATE_HW = 255 
 } HardwareModel;

variants/station-g1/platformio.ini

@@ -0,0 +1,8 @@
+; The 1.0 release of the nano-g1 board 
+[env:station-g1]
+extends = esp32_base
+board = ttgo-t-beam
+lib_deps =
+  ${esp32_base.lib_deps}
+build_flags = 
+  ${esp32_base.build_flags} -D STATION_G1  -I variants/station-g1

variants/station-g1/variant.h

@@ -0,0 +1,36 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+#define BUTTON_PIN 36     // The middle button GPIO on the Nano G1
+//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
+#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
+
+// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_RF95
+#define USE_SX1262
+
+#define LORA_DIO0 26 // a No connect on the SX1262 module
+#define LORA_RESET 23
+#define LORA_DIO1 33 // SX1262 IRQ
+#define LORA_DIO2 32 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+//#define SX126X_E22 // Not really an E22 
+// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+#endif
+
+#define BATTERY_PIN 35    // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define BATTERY_SENSE_SAMPLES 30  //Set the number of samples, It has an effect of increasing sensitivity.
+#define ADC_MULTIPLIER 2.15
+
+// different screen
+#define USE_SH1106

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 1
 minor = 3
-build = 28
+build = 29