meshtastic-firmware/variants/pca10056-rc-clock/variant.h

161 wiersze
4.0 KiB
C
Czysty Zwykły widok Historia

/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_PCA10056_
#define _VARIANT_PCA10056_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// This file is the same as the standard pac10056 variant, except that @geeksville broke the xtal on his devboard so
// he has to use a RC clock.
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (13)
#define PIN_LED2 (14)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_RED PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 0 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 11
#define PIN_BUTTON2 12
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins
*/
#define PIN_A0 (3)
#define PIN_A1 (4)
#define PIN_A2 (28)
#define PIN_A3 (29)
#define PIN_A4 (30)
#define PIN_A5 (31)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// Arduino Header D0, D1
#define PIN_SERIAL1_RX (33) // P1.01
#define PIN_SERIAL1_TX (34) // P1.02
// Connected to Jlink CDC
#define PIN_SERIAL2_RX (8)
#define PIN_SERIAL2_TX (6)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (46)
#define PIN_SPI_MOSI (45)
#define PIN_SPI_SCK (47)
static const uint8_t SS = 44;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (26)
#define PIN_WIRE_SCL (27)
// QSPI Pins
#define PIN_QSPI_SCK 19
#define PIN_QSPI_CS 17
#define PIN_QSPI_IO0 20
#define PIN_QSPI_IO1 21
#define PIN_QSPI_IO2 22
#define PIN_QSPI_IO3 23
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES MX25R6435F
#define EXTERNAL_FLASH_USE_QSPI
// CUSTOM GPIOs the SX1262MB2CAS shield when installed on the NRF52840-DK development board
#define SX1262_CS (32 + 8) // P1.08
#define SX1262_DIO1 (32 + 6) // P1.06
#define SX1262_BUSY (32 + 4) // P1.04
#define SX1262_RESET (0 + 3) // P0.03
#define SX1262_ANT_SW (32 + 10) // P1.10
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif