meshtastic-firmware/docs/software/build-instructions.md

23 wiersze
1.6 KiB
Markdown
Czysty Zwykły widok Historia

2020-03-06 03:00:00 +00:00
# Build instructions
This project uses the simple PlatformIO build system. You can use the IDE, but for brevity
in these instructions I describe use of their command line tool.
1. Purchase a suitable radio (see above)
2. Install [PlatformIO](https://platformio.org/platformio-ide)
3. Download this git repo and cd into it
4. Run `git submodule update --init --recursive` to pull in dependencies this project needs.
5. If you are outside the USA, edit [platformio.ini](/platformio.ini) to set the correct frequency range for your country. The line you need to change starts with `hw_version` and instructions are provided above that line. Options are provided for `EU433`, `EU835`, `CN`, `JP` and `US` (default). Pull-requests eagerly accepted for other countries.
2020-06-06 21:30:15 +00:00
6. Plug the radio into your USB port
7. Type `pio run --environment XXX -t upload` (This command will fetch dependencies, build the project and install it on the board via USB). For XXX, use the board type you have (either `tbeam`, `heltec`, `ttgo-lora32-v1`, `ttgo-lora32-v2`).
2020-06-06 21:30:15 +00:00
8. Platform IO also installs a very nice VisualStudio Code based IDE, see their [tutorial](https://docs.platformio.org/en/latest/tutorials/espressif32/arduino_debugging_unit_testing.html) if you'd like to use it.
2020-03-15 19:28:30 +00:00
## Decoding stack traces
If you get a crash, you can decode the addresses from the `Backtrace:` line:
2020-03-15 19:28:30 +00:00
1. Save the `Backtrace: 0x....` line to a file, e.g., `backtrace.txt`.
2. Run `bin/exception_decoder.py backtrace.txt` (this uses symbols from the
last `firmware.elf`, so you must be running the same binary that's still in
your `.pio/build` directory).