meshtastic-firmware/src/configuration.h

/*

TTGO T-BEAM Tracker for The Things Network

Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>

This code requires LMIC library by Matthijs Kooijman
https://github.com/matthijskooijman/arduino-lmic

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

*/

#pragma once

#include <Arduino.h>
// -----------------------------------------------------------------------------
// Version
// -----------------------------------------------------------------------------

#define APP_NAME                "meshtastic-esp32"
#define APP_VERSION             "0.0.1"

// -----------------------------------------------------------------------------
// Configuration
// -----------------------------------------------------------------------------

// Select which T-Beam board is being used. Only uncomment one.
// #define T_BEAM_V10  // AKA Rev1 (second board released)
#define HELTEC_LORA32

#define DEBUG_PORT              Serial      // Serial debug port
#define SERIAL_BAUD             115200      // Serial debug baud rate
#define SLEEP_MSECS             (30 * 24 * 60 * 60 * 1000LL) // Sleep for these many millis (or a button press or a lora msg?)
#define MESSAGE_TO_SLEEP_DELAY  5000        // Time after message before going to sleep
#define LOGO_DELAY              5000        // Time to show logo on first boot
#define REQUIRE_RADIO           true        // If true, we will fail to start if the radio is not found

// If not defined, we will wait for lock forever
#define MINWAKE_MSECS           (30 * 1000)  // Wait after every boot for GPS lock (may need longer than 5s because we turned the gps off during deep sleep)

// -----------------------------------------------------------------------------
// DEBUG
// -----------------------------------------------------------------------------

#ifdef DEBUG_PORT
#define DEBUG_MSG(...) DEBUG_PORT.printf( __VA_ARGS__ )
#else
#define DEBUG_MSG(...)
#endif

// -----------------------------------------------------------------------------
// Custom messages
// -----------------------------------------------------------------------------

#define EV_QUEUED       100
#define EV_PENDING      101
#define EV_ACK          102
#define EV_RESPONSE     103

// -----------------------------------------------------------------------------
// General
// -----------------------------------------------------------------------------





// -----------------------------------------------------------------------------
// OLED
// -----------------------------------------------------------------------------

#define SSD1306_ADDRESS 0x3C

// -----------------------------------------------------------------------------
// GPS
// -----------------------------------------------------------------------------

#define GPS_SERIAL_NUM  1
#define GPS_BAUDRATE    9600
#define USE_GPS         1

#if defined(T_BEAM_V10)
#define GPS_RX_PIN      34
#define GPS_TX_PIN      12
#endif

// -----------------------------------------------------------------------------
// LoRa SPI
// -----------------------------------------------------------------------------

#define SCK_GPIO        5
#define MISO_GPIO       19
#define MOSI_GPIO       27
#define NSS_GPIO        18

#if defined(T_BEAM_V10)

#define I2C_SDA         21
#define I2C_SCL         22

#define BUTTON_PIN      38

#define RESET_GPIO      14
#define DIO0_GPIO       26
#define DIO1_GPIO       33 // Note: not really used on this board
#define DIO2_GPIO       32 // Note: not really used on this board
#define PMU_IRQ         35

#elif defined(HELTEC_LORA32)
#define I2C_SDA         4
#define I2C_SCL         15

#define RESET_OLED      16

#define VEXT_ENABLE     21 // active low, powers the oled display
#define LED_PIN         25
#define BUTTON_PIN      0

#define RESET_GPIO      14
#define DIO0_GPIO       26
#define DIO1_GPIO       35 
#define DIO2_GPIO       34 
#endif


// -----------------------------------------------------------------------------
// AXP192 (Rev1-specific options)
// -----------------------------------------------------------------------------

// #define AXP192_SLAVE_ADDRESS  0x34 // Now defined in axp20x.h
#define GPS_POWER_CTRL_CH     3
#define LORA_POWER_CTRL_CH    2