The Bluetooth API is design to have only a few characteristics and most polymorphism comes from the flexible set of Google Protocol Buffers which are sent over the wire. We use protocol buffers extensively both for the bluetooth API and for packets inside the mesh or when providing packets to other applications on the phone.
This device will work with any MTU size, but it is highly recommended that you call your phone's "setMTU function to increase MTU to 512 bytes" as soon as you connect to a service. This will dramatically improve performance when reading/writing packets.
This is the main bluetooth service for the device and provides the API your app should use to get information about the mesh, send packets or provision the radio.
For a reference implementation of a client that uses this service see [RadioInterfaceService](https://github.com/meshtastic/Meshtastic-Android/blob/master/app/src/main/java/com/geeksville/mesh/service/RadioInterfaceService.kt). Typical flow when
For definitions (and documentation) on FromRadio, ToRadio, MyNodeInfo, NodeInfo and User protocol buffers see [mesh.proto](https://github.com/meshtastic/Meshtastic-protobufs/blob/master/mesh.proto)
The phone can write to this register to go backwards up to FIXME packets, to handle the rare case of a fromradio packet was dropped after the esp32 callback was called, but before it arrives at the phone. If the phone writes to this register the esp32 will discard older packets and put the next packet >= fromnum in fromradio.
When the esp32 advances fromnum, it will delay doing the notify by 100ms, in the hopes that the notify will never actally need to be sent if the phone is already pulling from fromradio.
Note: that if the phone ever sees this number decrease, it means the esp32 has rebooted.
Re: queue management
Not all messages are kept in the fromradio queue (filtered based on SubPacket):
- only the most recent Position and User messages for a particular node are kept
- all Data SubPackets are kept
- No WantNodeNum / DenyNodeNum messages are kept
A variable keepAllPackets, if set to true will suppress this behavior and instead keep everything for forwarding to the phone (for debugging)
## Protobuf API
On connect, you should send a want_config_id protobuf to the device. This will cause the device to send its node DB and radio config via the fromradio endpoint. After sending the full DB, the radio will send a want_config_id to indicate it is done sending the configuration.
The software update service. For a sample function that performs a software update using this API see [startUpdate](https://github.com/meshtastic/Meshtastic-Android/blob/master/app/src/main/java/com/geeksville/mesh/service/SoftwareUpdateService.kt).
| e74dd9c0-a301-4a6f-95a1-f0e1dbea8e1e | write,read | total image size, 32 bit, write this first, then read read back to see if it was acceptable (0 mean not accepted) |
| e272ebac-d463-4b98-bc84-5cc1a39ee517 | write | data, variable sized, recommended 512 bytes, write one for each block of file |
| 4826129c-c22a-43a3-b066-ce8f0d5bacc6 | write | crc32, write last - writing this will complete the OTA operation, now you can read result |
| 5e134862-7411-4424-ac4a-210937432c77 | read,notify | result code, readable but will notify when the OTA operation completes |
| GATT_UUID_SW_VERSION_STR/0x2a28 | read | We also implement these standard GATT entries because SW update probably needs them: |
Implements the standard BLE contract service, provides battery level in a way that most client devices should automatically understand (i.e. it should show in the bluetooth devices screen automatically)
