mirror
/
wmbusmeters
kopia lustrzana https://github.com/weetmuts/wmbusmeters
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update CHANGES and README.

pull/587/head
Fredrik Öhrström 2022-08-04 11:30:02 +02:00
rodzic 789b76d65c
commit de5998306c
2 zmienionych plików z 9 dodań i 6 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
CHANGES
Wyświetl plik

@ -1,4 +1,6 @@
Paulo Rossi added support for the AMB3665-M wmbus dongle for N-mode 169 MHz telegrams. Thanks Paulo!
Version 1.8.0: 2022-06-25
ATTENTION! Counter suffix _int is changed to _counter.

13
README.md
Wyświetl plik

@ -40,7 +40,7 @@ Read the wiki for more info on how to use the snap: https://weetmuts.github.io/w
Building and installing from source is easy and recommended since the
development progresses quickly. First remove the wmbus dongle
(im871a,amb8465,cul,rc1180) or the generic rtlsdr dongle (RTL2832U)
(im871a,amb8465,amb3665,cul,rc1180) or the generic rtlsdr dongle (RTL2832U)
from your computer. Then do:
`./configure; make; sudo make install` will install wmbusmeters as a daemon.
@ -48,7 +48,7 @@ from your computer. Then do:
# Usage
Check the contents of your `/etc/wmbusmeters.conf` file, assuming it
has `device=auto:t1` and you are using a im871a,amb8465,rc1180,cul or rtlsdr device,
has `device=auto:t1` and you are using a im871a,amb8465,amb3665,rc1180,cul or rtlsdr device,
then you can now start the daemon with `sudo systemctl start wmbusmeters`
or you can try it from the command line `wmbusmeters auto:t1`
@ -96,7 +96,7 @@ you can add `donotprobe=/dev/ttyUSB0` or `donotprobe=all`.
You can specify combinations like: `device=rc1180:t1` `device=auto:c1`
to set the rc1180 dongle to t1 but any other auto-detected dongle to c1.
Some dongles have identifiers (im871a,amb8465 and rtlsdrs) (for example: rtlsdr can be set with `rtl_eeprom -s myname`)
Some dongles have identifiers (im871a,amb8465,amb3665 and rtlsdrs) (for example: rtlsdr can be set with `rtl_eeprom -s myname`)
You might have two rtlsdr dongles, one attached to an antenna tuned to 433MHz and the other
attached to an antenna tuned for 868.95MHz, then a more complicated setup could look like this:
@ -336,7 +336,7 @@ As {options} you can use:
As device you can use:
`auto:c1`, to have wmbusmeters probe for devices: im871a, amb8465, cul, rc1180 or rtlsdr (spawns rtlwmbus).
`auto:c1`, to have wmbusmeters probe for devices: im871a, amb8465, amb3665, cul, rc1180 or rtlsdr (spawns rtlwmbus).
`im871a:c1` to start all connected *im871a* devices in *c1* mode, ignore all other devices.
@ -351,7 +351,7 @@ rtlsdr dongle like this `rtlwmbus[1234]`.
`/dev/ttyUSB0:amb8465`, if you have an amb8465 dongle assigned to ttyUSB0. Other suffixes are im871a,cul.
`/dev/ttyUSB0`, to have wmbusmeters auto-detect amb8465, im871a, rc1180 or cul device.
`/dev/ttyUSB0`, to have wmbusmeters auto-detect amb8465, amb3665, im871a, rc1180 or cul device.
`/dev/ttyUSB0:38400`, to have wmbusmeters set the baud rate to 38400 and listen for raw wmbus telegrams.
These telegrams are expected to have the data link layer crc bytes removed already!
@ -418,7 +418,8 @@ As meter quadruples you specify:
```
Supported wmbus dongles:
IMST 871a (im871a)
Amber 8465/8665/8665-M (amb8465)
Amber 8465/8665/8665-M (amb8465) 868MHz
Amber 3665-M (amb3665) 169MHz
CUL family (cul)
Radiocraft (RC1180)
rtl_wmbus (rtlwmbus)