mirror
/
wfview
kopia lustrzana https://gitlab.com/eliggett/wfview
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
wfview/rigcommander.cpp

4078 wiersze
120 KiB
C++
Czysty Wina Historia

#include "rigcommander.h"
#include <QDebug>
#include "rigidentities.h"
#include "logcategories.h"
// Copytight 2017-2020 Elliott H. Liggett
// This file parses data from the radio and also forms commands to the radio.
// The radio physical interface is handled by the commHandler() instance "comm"
//
// See here for a wonderful CI-V overview:
// http://www.plicht.de/ekki/civ/civ-p0a.html
//
// The IC-7300 "full" manual also contains a command reference.
// How to make spectrum display stop using rigctl:
// echo "w \0xFE\0xFE\0x94\0xE0\0x27\0x11\0x00\0xFD" | rigctl -m 3073 -r /dev/ttyUSB0 -s 115200 -vvvvv
// Note: When sending \x00, must use QByteArray.setRawData()
rigCommander::rigCommander()
{
rigState.filter = 0;
rigState.mode = 0;
rigState.ptt = 0;
rigState.currentVfo = 0;
rigState.duplex = dmSplitOff;
}
rigCommander::~rigCommander()
{
closeComm();
}
void rigCommander::commSetup(unsigned char rigCivAddr, QString rigSerialPort, quint32 rigBaudRate, QString vsp)
{
// construct
// TODO: Bring this parameter and the comm port from the UI.
// Keep in hex in the UI as is done with other CIV apps.
// civAddr = 0x94; // address of the radio. Decimal is 148.
civAddr = rigCivAddr; // address of the radio. Decimal is 148.
usingNativeLAN = false;
// ---
setup();
// ---
this->rigSerialPort = rigSerialPort;
this->rigBaudRate = rigBaudRate;
comm = new commHandler(rigSerialPort, rigBaudRate);
ptty = new pttyHandler(vsp);
// data from the comm port to the program:
connect(comm, SIGNAL(haveDataFromPort(QByteArray)), this, SLOT(handleNewData(QByteArray)));
// data from the ptty to the rig:
connect(ptty, SIGNAL(haveDataFromPort(QByteArray)), comm, SLOT(receiveDataFromUserToRig(QByteArray)));
// data from the program to the comm port:
connect(this, SIGNAL(dataForComm(QByteArray)), comm, SLOT(receiveDataFromUserToRig(QByteArray)));
connect(this, SIGNAL(toggleRTS(bool)), comm, SLOT(setRTS(bool)));
// data from the rig to the ptty:
connect(comm, SIGNAL(haveDataFromPort(QByteArray)), ptty, SLOT(receiveDataFromRigToPtty(QByteArray)));
connect(comm, SIGNAL(haveSerialPortError(QString, QString)), this, SLOT(handleSerialPortError(QString, QString)));
connect(ptty, SIGNAL(haveSerialPortError(QString, QString)), this, SLOT(handleSerialPortError(QString, QString)));
connect(this, SIGNAL(getMoreDebug()), comm, SLOT(debugThis()));
connect(this, SIGNAL(getMoreDebug()), ptty, SLOT(debugThis()));
connect(this, SIGNAL(discoveredRigID(rigCapabilities)), ptty, SLOT(receiveFoundRigID(rigCapabilities)));
emit commReady();
sendState(); // Send current rig state to rigctld
}
void rigCommander::commSetup(unsigned char rigCivAddr, udpPreferences prefs, audioSetup rxSetup, audioSetup txSetup, QString vsp)
{
// construct
// TODO: Bring this parameter and the comm port from the UI.
// Keep in hex in the UI as is done with other CIV apps.
// civAddr = 0x94; // address of the radio. Decimal is 148.
civAddr = rigCivAddr; // address of the radio. Decimal is 148.
usingNativeLAN = true;
// ---
setup();
// ---
if (udp == Q_NULLPTR) {
udp = new udpHandler(prefs,rxSetup,txSetup);
udpHandlerThread = new QThread(this);
udp->moveToThread(udpHandlerThread);
connect(this, SIGNAL(initUdpHandler()), udp, SLOT(init()));
connect(udpHandlerThread, SIGNAL(finished()), udp, SLOT(deleteLater()));
udpHandlerThread->start();
emit initUdpHandler();
//this->rigSerialPort = rigSerialPort;
//this->rigBaudRate = rigBaudRate;
ptty = new pttyHandler(vsp);
// Data from UDP to the program
connect(udp, SIGNAL(haveDataFromPort(QByteArray)), this, SLOT(handleNewData(QByteArray)));
// data from the rig to the ptty:
connect(udp, SIGNAL(haveDataFromPort(QByteArray)), ptty, SLOT(receiveDataFromRigToPtty(QByteArray)));
// Audio from UDP
connect(udp, SIGNAL(haveAudioData(audioPacket)), this, SLOT(receiveAudioData(audioPacket)));
// data from the program to the rig:
connect(this, SIGNAL(dataForComm(QByteArray)), udp, SLOT(receiveDataFromUserToRig(QByteArray)));
// data from the ptty to the rig:
connect(ptty, SIGNAL(haveDataFromPort(QByteArray)), udp, SLOT(receiveDataFromUserToRig(QByteArray)));
connect(this, SIGNAL(haveChangeLatency(quint16)), udp, SLOT(changeLatency(quint16)));
connect(this, SIGNAL(haveSetVolume(unsigned char)), udp, SLOT(setVolume(unsigned char)));
connect(udp, SIGNAL(haveBaudRate(quint32)), this, SLOT(receiveBaudRate(quint32)));
// Connect for errors/alerts
connect(udp, SIGNAL(haveNetworkError(QString, QString)), this, SLOT(handleSerialPortError(QString, QString)));
connect(udp, SIGNAL(haveNetworkStatus(QString)), this, SLOT(handleStatusUpdate(QString)));
connect(ptty, SIGNAL(haveSerialPortError(QString, QString)), this, SLOT(handleSerialPortError(QString, QString)));
connect(this, SIGNAL(getMoreDebug()), ptty, SLOT(debugThis()));
connect(this, SIGNAL(discoveredRigID(rigCapabilities)), ptty, SLOT(receiveFoundRigID(rigCapabilities)));
emit haveAfGain(rxSetup.localAFgain);
}
// data from the comm port to the program:
emit commReady();
sendState(); // Send current rig state to rigctld
pttAllowed = true; // This is for developing, set to false for "safe" debugging. Set to true for deployment.
}
void rigCommander::closeComm()
{
qDebug(logRig()) << "Closing rig comms";
if (comm != Q_NULLPTR) {
delete comm;
}
comm = Q_NULLPTR;
if (udpHandlerThread != Q_NULLPTR) {
udpHandlerThread->quit();
udpHandlerThread->wait();
}
udp = Q_NULLPTR;
if (ptty != Q_NULLPTR) {
delete ptty;
}
ptty = Q_NULLPTR;
}
void rigCommander::setup()
{
// common elements between the two constructors go here:
setCIVAddr(civAddr);
spectSeqMax = 0; // this is now set after rig ID determined
payloadSuffix = QByteArray("\xFD");
lookingForRig = false;
foundRig = false;
oldScopeMode = spectModeUnknown;
pttAllowed = true; // This is for developing, set to false for "safe" debugging. Set to true for deployment.
}
void rigCommander::process()
{
// new thread enters here. Do nothing but do check for errors.
if(comm!=Q_NULLPTR && comm->serialError)
{
emit haveSerialPortError(rigSerialPort, QString("Error from commhandler. Check serial port."));
}
}
void rigCommander::handleSerialPortError(const QString port, const QString errorText)
{
qInfo(logRig()) << "Error using port " << port << " message: " << errorText;
emit haveSerialPortError(port, errorText);
}
void rigCommander::handleStatusUpdate(const QString text)
{
emit haveStatusUpdate(text);
}
bool rigCommander::usingLAN()
{
return usingNativeLAN;
}
void rigCommander::receiveBaudRate(quint32 baudrate) {
emit haveBaudRate(baudrate);
}
void rigCommander::findRigs()
{
// This function sends data to 0x00 ("broadcast") to look for any connected rig.
lookingForRig = true;
foundRig = false;
QByteArray data;
QByteArray data2;
//data.setRawData("\xFE\xFE\xa2", 3);
data.setRawData("\xFE\xFE\x00", 3);
data.append((char)compCivAddr); // wfview's address, 0xE1
data2.setRawData("\x19\x00", 2); // get rig ID
data.append(data2);
data.append(payloadSuffix);
emit dataForComm(data);
// HACK for testing radios that do not respond to rig ID queries:
//this->model = model736;
//this->determineRigCaps();
return;
}
void rigCommander::prepDataAndSend(QByteArray data)
{
data.prepend(payloadPrefix);
//printHex(data, false, true);
data.append(payloadSuffix);
if(data[4] != '\x15')
{
// We don't print out requests for meter levels
qDebug(logRig()) << "Final payload in rig commander to be sent to rig: ";
printHex(data);
}
emit dataForComm(data);
}
void rigCommander::powerOn()
{
QByteArray payload;
for(int i=0; i < 150; i++)
{
payload.append("\xFE");
}
payload.append(payloadPrefix); // FE FE 94 E1
payload.append("\x18\x01");
payload.append(payloadSuffix); // FD
qDebug(logRig()) << "Power ON command in rigcommander to be sent to rig: ";
printHex(payload);
emit dataForComm(payload);
}
void rigCommander::powerOff()
{
QByteArray payload;
payload.setRawData("\x18\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::enableSpectOutput()
{
QByteArray payload("\x27\x11\x01");
prepDataAndSend(payload);
}
void rigCommander::disableSpectOutput()
{
QByteArray payload;
payload.setRawData("\x27\x11\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::enableSpectrumDisplay()
{
// 27 10 01
QByteArray payload("\x27\x10\x01");
prepDataAndSend(payload);
}
void rigCommander::disableSpectrumDisplay()
{
// 27 10 00
QByteArray payload;
payload.setRawData("\x27\x10\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::setSpectrumBounds(double startFreq, double endFreq, unsigned char edgeNumber)
{
if((edgeNumber > 4) || (!edgeNumber))
{
return;
}
unsigned char freqRange = 1; // 1 = VHF, 2 = UHF, 3 = L-Band
switch(rigCaps.model)
{
case model9700:
if(startFreq > 148)
{
freqRange++;
if(startFreq > 450)
{
freqRange++;
}
}
break;
case model705:
case model7300:
case model7610:
case model7850:
// Some rigs do not go past 60 MHz, but we will not encounter
// requests for those ranges since they are derived from the rig's existing scope range.
// start value of freqRange is 1.
if(startFreq > 1.6)
freqRange++;
if(startFreq > 2.0)
freqRange++;
if(startFreq > 6.0)
freqRange++;
if(startFreq > 8.0)
freqRange++;
if(startFreq > 11.0)
freqRange++;
if(startFreq > 15.0)
freqRange++;
if(startFreq > 20.0)
freqRange++;
if(startFreq > 22.0)
freqRange++;
if(startFreq > 26.0)
freqRange++;
if(startFreq > 30.0)
freqRange++;
if(startFreq > 45.0)
freqRange++;
if(startFreq > 60.0)
freqRange++;
if(startFreq > 74.8)
freqRange++;
if(startFreq > 108.0)
freqRange++;
if(startFreq > 137.0)
freqRange++;
if(startFreq > 400.0)
freqRange++;
break;
case modelR8600:
freqRange = 1;
edgeNumber = 1;
break;
default:
return;
break;
}
QByteArray lowerEdge = makeFreqPayload(startFreq);
QByteArray higherEdge = makeFreqPayload(endFreq);
QByteArray payload;
payload.setRawData("\x27\x1E", 2);
payload.append(freqRange);
payload.append(edgeNumber);
payload.append(lowerEdge);
payload.append(higherEdge);
prepDataAndSend(payload);
}
void rigCommander::getScopeMode()
{
// center or fixed
QByteArray payload;
payload.setRawData("\x27\x14\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::getScopeEdge()
{
QByteArray payload;
payload.setRawData("\x27\x16", 2);
prepDataAndSend(payload);
}
void rigCommander::setScopeEdge(char edge)
{
// 1 2 or 3
// 27 16 00 0X
if((edge <1) || (edge >4))
return;
QByteArray payload;
payload.setRawData("\x27\x16\x00", 3);
payload.append(edge);
prepDataAndSend(payload);
}
void rigCommander::getScopeSpan()
{
getScopeSpan(false);
}
void rigCommander::getScopeSpan(bool isSub)
{
QByteArray payload;
payload.setRawData("\x27\x15", 2);
payload.append(static_cast<unsigned char>(isSub));
prepDataAndSend(payload);
}
void rigCommander::setScopeSpan(char span)
{
// See ICD, page 165, "19-12".
// 2.5k = 0
// 5k = 2, etc.
if((span <0 ) || (span >9))
return;
QByteArray payload;
double freq; // MHz
payload.setRawData("\x27\x15\x00", 3);
// next 6 bytes are the frequency
switch(span)
{
case 0:
// 2.5k
freq = 2.5E-3;
break;
case 1:
// 5k
freq = 5.0E-3;
break;
case 2:
freq = 10.0E-3;
break;
case 3:
freq = 25.0E-3;
break;
case 4:
freq = 50.0E-3;
break;
case 5:
freq = 100.0E-3;
break;
case 6:
freq = 250.0E-3;
break;
case 7:
freq = 500.0E-3;
break;
case 8:
freq = 1000.0E-3;
break;
case 9:
freq = 2500.0E-3;
break;
default:
return;
break;
}
payload.append( makeFreqPayload(freq));
payload.append("\x00");
// printHex(payload, false, true);
prepDataAndSend(payload);
}
void rigCommander::setSpectrumMode(spectrumMode spectMode)
{
QByteArray specModePayload;
specModePayload.setRawData("\x27\x14\x00", 3);
specModePayload.append( static_cast<unsigned char>(spectMode) );
prepDataAndSend(specModePayload);
}
void rigCommander::getSpectrumRefLevel()
{
QByteArray payload;
payload.setRawData("\x27\x19\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::getSpectrumRefLevel(unsigned char mainSub)
{
QByteArray payload;
payload.setRawData("\x27\x19", 2);
payload.append(mainSub);
prepDataAndSend(payload);
}
void rigCommander::setSpectrumRefLevel(int level)
{
//qInfo(logRig()) << __func__ << ": Setting scope to level " << level;
QByteArray setting;
QByteArray number;
QByteArray pn;
setting.setRawData("\x27\x19\x00", 3);
if(level >= 0)
{
pn.setRawData("\x00", 1);
number = bcdEncodeInt(level*10);
} else {
pn.setRawData("\x01", 1);
number = bcdEncodeInt( (-level)*10 );
}
setting.append(number);
setting.append(pn);
//qInfo(logRig()) << __func__ << ": scope reference number: " << number << ", PN to: " << pn;
//printHex(setting, false, true);
prepDataAndSend(setting);
}
void rigCommander::getSpectrumCenterMode()
{
QByteArray specModePayload;
specModePayload.setRawData("\x27\x14", 2);
prepDataAndSend(specModePayload);
}
void rigCommander::getSpectrumMode()
{
QByteArray specModePayload;
specModePayload.setRawData("\x27\x14", 2);
prepDataAndSend(specModePayload);
}
void rigCommander::setFrequency(unsigned char vfo, freqt freq)
{
QByteArray freqPayload = makeFreqPayload(freq);
QByteArray cmdPayload;
cmdPayload.append(freqPayload);
if (vfo == 0) {
rigState.vfoAFreq = freq;
cmdPayload.prepend('\x00');
}
else
{
rigState.vfoBFreq = freq;
cmdPayload.prepend(vfo);
cmdPayload.prepend('\x25');
}
//printHex(cmdPayload, false, true);
prepDataAndSend(cmdPayload);
}
QByteArray rigCommander::makeFreqPayload(freqt freq)
{
QByteArray result;
quint64 freqInt = freq.Hz;
unsigned char a;
int numchars = 5;
for (int i = 0; i < numchars; i++) {
a = 0;
a |= (freqInt) % 10;
freqInt /= 10;
a |= ((freqInt) % 10)<<4;
freqInt /= 10;
result.append(a);
//printHex(result, false, true);
}
return result;
}
QByteArray rigCommander::makeFreqPayload(double freq)
{
quint64 freqInt = (quint64) (freq * 1E6);
QByteArray result;
unsigned char a;
int numchars = 5;
for (int i = 0; i < numchars; i++) {
a = 0;
a |= (freqInt) % 10;
freqInt /= 10;
a |= ((freqInt) % 10)<<4;
freqInt /= 10;
result.append(a);
//printHex(result, false, true);
}
//qInfo(logRig()) << "encoded frequency for " << freq << " as int " << freqInt;
//printHex(result, false, true);
return result;
}
void rigCommander::setRitEnable(bool ritEnabled)
{
QByteArray payload;
if(ritEnabled)
{
payload.setRawData("\x21\x01\x01", 3);
} else {
payload.setRawData("\x21\x01\x00", 3);
}
prepDataAndSend(payload);
}
void rigCommander::getRitEnabled()
{
QByteArray payload;
payload.setRawData("\x21\x01", 2);
prepDataAndSend(payload);
}
void rigCommander::getRitValue()
{
QByteArray payload;
payload.setRawData("\x21\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::setRitValue(int ritValue)
{
QByteArray payload;
QByteArray freqBytes;
freqt f;
bool isNegative = false;
payload.setRawData("\x21\x00", 2);
if(ritValue < 0)
{
isNegative = true;
ritValue *= -1;
}
if(ritValue > 9999)
return;
f.Hz = ritValue;
freqBytes = makeFreqPayload(f);
freqBytes.truncate(2);
payload.append(freqBytes);
payload.append(QByteArray(1,(char)isNegative));
prepDataAndSend(payload);
}
void rigCommander::setMode(mode_info m)
{
QByteArray payload;
if(rigCaps.model==model706)
{
m.filter = '\x01';
}
if(m.mk == modeWFM)
{
m.filter = '\x01';
}
payload.setRawData("\x06", 1);
payload.append(m.reg);
payload.append(m.filter);
prepDataAndSend(payload);
rigState.mode = m.reg;
rigState.filter = m.filter;
}
void rigCommander::setMode(unsigned char mode, unsigned char modeFilter)
{
QByteArray payload;
if(mode < 0x22 + 1)
{
// mode command | filter
// 0x01 | Filter 01 automatically
// 0x04 | user-specififed 01, 02, 03 | note, is "read the current mode" on older rigs
// 0x06 | "default" filter is auto
payload.setRawData("\x06", 1); // cmd 06 needs filter specified
//payload.setRawData("\x04", 1); // cmd 04 will apply the default filter, but it seems to always pick FIL 02
payload.append(mode);
if(rigCaps.model==model706)
{
payload.append("\x01"); // "normal" on IC-706
} else {
if(mode == 0x06)
{
payload.append(0x01);
} else {
payload.append(modeFilter);
}
}
prepDataAndSend(payload);
rigState.mode = mode;
rigState.filter = modeFilter;
}
}
void rigCommander::setDataMode(bool dataOn, unsigned char filter)
{
QByteArray payload;
payload.setRawData("\x1A\x06", 2);
if(dataOn)
{
payload.append("\x01", 1); // data mode on
payload.append(filter);
} else {
payload.append("\x00\x00", 2); // data mode off, bandwidth not defined per ICD.
}
prepDataAndSend(payload);
rigState.datamode = dataOn;
}
void rigCommander::getFrequency()
{
// figure out frequency and then respond with haveFrequency();
// send request to radio
// 1. make the data
QByteArray payload("\x03");
prepDataAndSend(payload);
}
void rigCommander::getMode()
{
QByteArray payload("\x04");
prepDataAndSend(payload);
}
void rigCommander::getDataMode()
{
QByteArray payload("\x1A\x06");
prepDataAndSend(payload);
}
void rigCommander::setDuplexMode(duplexMode dm)
{
QByteArray payload;
if(dm==dmDupAutoOff)
{
payload.setRawData("\x1A\x05\x00\x46\x00", 5);
} else if (dm==dmDupAutoOn)
{
payload.setRawData("\x1A\x05\x00\x46\x01", 5);
} else {
payload.setRawData("\x0F", 1);
payload.append((unsigned char) dm);
}
prepDataAndSend(payload);
}
void rigCommander::getDuplexMode()
{
QByteArray payload;
// Duplex mode:
payload.setRawData("\x0F", 1);
prepDataAndSend(payload);
// Auto Repeater Mode:
payload.setRawData("\x1A\x05\x00\x46", 4);
prepDataAndSend(payload);
}
void rigCommander::getTransmitFrequency()
{
QByteArray payload;
payload.setRawData("\x1C\x03", 2);
prepDataAndSend(payload);
}
void rigCommander::setTone(quint16 tone)
{
QByteArray fenc = encodeTone(tone);
QByteArray payload;
payload.setRawData("\x1B\x00", 2);
payload.append(fenc);
//qInfo() << __func__ << "TONE encoded payload: ";
printHex(payload);
prepDataAndSend(payload);
}
void rigCommander::setTSQL(quint16 tsql)
{
QByteArray fenc = encodeTone(tsql);
QByteArray payload;
payload.setRawData("\x1B\x01", 2);
payload.append(fenc);
//qInfo() << __func__ << "TSQL encoded payload: ";
printHex(payload);
prepDataAndSend(payload);
}
void rigCommander::setDTCS(quint16 dcscode, bool tinv, bool rinv)
{
QByteArray denc = encodeTone(dcscode, tinv, rinv);
QByteArray payload;
payload.setRawData("\x1B\x02", 2);
payload.append(denc);
//qInfo() << __func__ << "DTCS encoded payload: ";
printHex(payload);
prepDataAndSend(payload);
}
QByteArray rigCommander::encodeTone(quint16 tone)
{
return encodeTone(tone, false, false);
}
QByteArray rigCommander::encodeTone(quint16 tone, bool tinv, bool rinv)
{
// This function is fine to use for DTCS and TONE
QByteArray enct;
unsigned char inv=0;
inv = inv | (unsigned char)rinv;
inv = inv | ((unsigned char)tinv) << 4;
enct.append(inv);
unsigned char hundreds = tone / 1000;
unsigned char tens = (tone-(hundreds*1000)) / 100;
unsigned char ones = (tone -(hundreds*1000)-(tens*100)) / 10;
unsigned char dec = (tone -(hundreds*1000)-(tens*100)-(ones*10));
enct.append(tens | (hundreds<<4));
enct.append(dec | (ones <<4));
return enct;
}
quint16 rigCommander::decodeTone(QByteArray eTone)
{
bool t;
bool r;
return decodeTone(eTone, t, r);
}
quint16 rigCommander::decodeTone(QByteArray eTone, bool &tinv, bool &rinv)
{
// index: 00 01 02 03 04
// CTCSS: 1B 01 00 12 73 = PL 127.3, decode as 1273
// D(T)CS: 1B 01 TR 01 23 = T/R Invert bits + DCS code 123
if (eTone.length() < 5) {
return 0;
}
tinv = false; rinv = false;
quint16 result = 0;
if((eTone.at(2) & 0x01) == 0x01)
tinv = true;
if((eTone.at(2) & 0x10) == 0x10)
rinv = true;
result += (eTone.at(4) & 0x0f);
result += ((eTone.at(4) & 0xf0) >> 4) * 10;
result += (eTone.at(3) & 0x0f) * 100;
result += ((eTone.at(3) & 0xf0) >> 4) * 1000;
return result;
}
void rigCommander::getTone()
{
QByteArray payload;
payload.setRawData("\x1B\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::getTSQL()
{
QByteArray payload;
payload.setRawData("\x1B\x01", 2);
prepDataAndSend(payload);
}
void rigCommander::getDTCS()
{
QByteArray payload;
payload.setRawData("\x1B\x02", 2);
prepDataAndSend(payload);
}
void rigCommander::getRptAccessMode()
{
QByteArray payload;
payload.setRawData("\x16\x5D", 2);
prepDataAndSend(payload);
}
void rigCommander::setRptAccessMode(rptAccessTxRx ratr)
{
QByteArray payload;
payload.setRawData("\x16\x5D", 2);
payload.append((unsigned char)ratr);
prepDataAndSend(payload);
}
void rigCommander::setIPP(bool enabled)
{
QByteArray payload;
payload.setRawData("\x16\x65", 2);
if(enabled)
{
payload.append("\x01");
} else {
payload.append("\x00");
}
prepDataAndSend(payload);
}
void rigCommander::getIPP()
{
QByteArray payload;
payload.setRawData("\x16\x65", 2);
prepDataAndSend(payload);
}
void rigCommander::setSatelliteMode(bool enabled)
{
QByteArray payload;
payload.setRawData("\x16\x5A", 2);
if(enabled)
{
payload.append("\x01");
} else {
payload.append("\x00");
}
prepDataAndSend(payload);
}
void rigCommander::getSatelliteMode()
{
QByteArray payload;
payload.setRawData("\x16\x5A", 2);
prepDataAndSend(payload);
}
void rigCommander::getPTT()
{
//if(rigCaps.useRTSforPTT && !usingNativeLAN)
//{
// emit havePTTStatus(comm->rtsStatus());
//} else {
QByteArray payload;
payload.setRawData("\x1C\x00", 2);
prepDataAndSend(payload);
//}
}
void rigCommander::getBandStackReg(char band, char regCode)
{
QByteArray payload("\x1A\x01");
payload.append(band); // [01 through 11]
payload.append(regCode); // [01...03]. 01 = latest, 03 = oldest
prepDataAndSend(payload);
}
void rigCommander::setPTT(bool pttOn)
{
//bool pttAllowed = false;
if(pttAllowed)
{
QByteArray payload("\x1C\x00", 2);
payload.append((char)pttOn);
prepDataAndSend(payload);
rigState.ptt = pttOn;
}
}
void rigCommander::setCIVAddr(unsigned char civAddr)
{
// Note: This sets the radio's CIV address
// the computer's CIV address is defined in the header file.
this->civAddr = civAddr;
payloadPrefix = QByteArray("\xFE\xFE");
payloadPrefix.append(civAddr);
payloadPrefix.append((char)compCivAddr);
}
void rigCommander::handleNewData(const QByteArray& data)
{
emit haveDataForServer(data);
parseData(data);
}
void rigCommander::receiveAudioData(const audioPacket& data)
{
emit haveAudioData(data);
}
void rigCommander::parseData(QByteArray dataInput)
{
// TODO: Clean this up.
// It finally works very nicely, needs to be streamlined.
//
int index = 0;
volatile int count = 0; // debug purposes
// use this:
QList <QByteArray> dataList = dataInput.split('\xFD');
QByteArray data;
// qInfo(logRig()) << "data list has this many elements: " << dataList.size();
if (dataList.last().isEmpty())
{
dataList.removeLast(); // if the original ended in FD, then there is a blank entry at the end.
}
// Only thing is, each frame is missing '\xFD' at the end. So append! Keeps the frames intact.
for(index = 0; index < dataList.count(); index++)
{
data = dataList[index];
data.append('\xFD'); // because we expect it to be there.
// foreach(listitem)
// listitem.append('\xFD');
// continue parsing...
count++;
// Data echo'd back from the rig start with this:
// fe fe 94 e0 ...... fd
// Data from the rig that is not an echo start with this:
// fe fe e0 94 ...... fd (for example, a reply to a query)
// Data from the rig that was not asked for is sent to controller 0x00:
// fe fe 00 94 ...... fd (for example, user rotates the tune control or changes the mode)
//qInfo(logRig()) << "Data received: ";
//printHex(data, false, true);
if(data.length() < 4)
{
if(data.length())
{
// Finally this almost never happens
// qInfo(logRig()) << "Data length too short: " << data.length() << " bytes. Data:";
//printHex(data, false, true);
}
// no
//return;
// maybe:
// continue;
}
if(!data.startsWith("\xFE\xFE"))
{
// qInfo(logRig()) << "Warning: Invalid data received, did not start with FE FE.";
// find 94 e0 and shift over,
// or look inside for a second FE FE
// Often a local echo will miss a few bytes at the beginning.
if(data.startsWith('\xFE'))
{
data.prepend('\xFE');
// qInfo(logRig()) << "Warning: Working with prepended data stream.";
parseData(payloadIn);
return;
} else {
//qInfo(logRig()) << "Error: Could not reconstruct corrupted data: ";
//printHex(data, false, true);
// data.right(data.length() - data.find('\xFE\xFE'));
// if found do not return and keep going.
return;
}
}
if((unsigned char)data[02] == civAddr)
{
// data is or begins with an echoback from what we sent
// find the first 'fd' and cut it. Then continue.
//payloadIn = data.right(data.length() - data.indexOf('\xfd')-1);
// qInfo(logRig()) << "[FOUND] Trimmed off echo:";
//printHex(payloadIn, false, true);
//parseData(payloadIn);
//return;
}
incomingCIVAddr = data[03]; // track the CIV of the sender.
switch(data[02])
{
// case civAddr: // can't have a variable here :-(
// // data is or begins with an echoback from what we sent
// // find the first 'fd' and cut it. Then continue.
// payloadIn = data.right(data.length() - data.indexOf('\xfd')-1);
// //qInfo(logRig()) << "Trimmed off echo:";
// //printHex(payloadIn, false, true);
// parseData(payloadIn);
// break;
// case '\xE0':
case (char)0xE0:
case (char)compCivAddr:
// data is a reply to some query we sent
// extract the payload out and parse.
// payload = getpayload(data); // or something
// parse (payload); // recursive ok?
payloadIn = data.right(data.length() - 4);
if(payloadIn.contains("\xFE"))
{
//qDebug(logRig()) << "Corrupted data contains FE within message body: ";
//printHex(payloadIn);
break;
}
parseCommand();
break;
case '\x00':
// data send initiated by the rig due to user control
// extract the payload out and parse.
if((unsigned char)data[03]==compCivAddr)
{
// This is an echo of our own broadcast request.
// The data are "to 00" and "from E1"
// Don't use it!
qDebug(logRig()) << "Caught it! Found the echo'd broadcast request from us! Rig has not responded to broadcast query yet.";
} else {
payloadIn = data.right(data.length() - 4); // Removes FE FE E0 94 part
if(payloadIn.contains("\xFE"))
{
//qDebug(logRig()) << "Corrupted data contains FE within message body: ";
//printHex(payloadIn);
break;
}
parseCommand();
}
break;
default:
// could be for other equipment on the CIV network.
// just drop for now.
// relaySendOutData(data);
break;
}
}
/*
if(dataList.length() > 1)
{
qInfo(logRig()) << "Recovered " << count << " frames from single data with size" << dataList.count();
}
*/
}
void rigCommander::parseCommand()
{
// note: data already is trimmed of the beginning FE FE E0 94 stuff.
bool isSpectrumData = payloadIn.startsWith(QByteArray().setRawData("\x27\x00", 2));
if( (!isSpectrumData) && (payloadIn[00] != '\x15') )
{
// We do not log spectrum and meter data,
// as they tend to clog up any useful logging.
printHex(payloadIn);
}
switch(payloadIn[00])
{
case 00:
// frequency data
parseFrequency();
break;
case 03:
parseFrequency();
break;
case '\x25':
if((int)payloadIn[1] == 0)
{
emit haveFrequency(parseFrequency(payloadIn, 5));
}
break;
case '\x01':
//qInfo(logRig()) << "Have mode data";
this->parseMode();
break;
case '\x04':
//qInfo(logRig()) << "Have mode data";
this->parseMode();
break;
case '\x05':
//qInfo(logRig()) << "Have frequency data";
this->parseFrequency();
break;
case '\x06':
//qInfo(logRig()) << "Have mode data";
this->parseMode();
break;
case '\x0F':
emit haveDuplexMode((duplexMode)(unsigned char)payloadIn[1]);
rigState.duplex = (duplexMode)(unsigned char)payloadIn[1];
break;
case '\x11':
emit haveAttenuator((unsigned char)payloadIn.at(1));
rigState.attenuator = (unsigned char)payloadIn.at(1);
break;
case '\x12':
emit haveAntenna((unsigned char)payloadIn.at(1), (bool)payloadIn.at(2));
rigState.antenna = (unsigned char)payloadIn.at(1);
rigState.rxAntenna = (bool)payloadIn.at(2);
break;
case '\x14':
// read levels
parseLevels();
break;
case '\x15':
// Metering such as s, power, etc
parseLevels();
break;
case '\x16':
parseRegister16();
break;
case '\x19':
// qInfo(logRig()) << "Have rig ID: " << (unsigned int)payloadIn[2];
// printHex(payloadIn, false, true);
model = determineRadioModel(payloadIn[2]); // verify this is the model not the CIV
rigCaps.modelID = payloadIn[2];
determineRigCaps();
qInfo(logRig()) << "Have rig ID: decimal: " << (unsigned int)rigCaps.modelID;
break;
case '\x21':
// RIT and Delta TX:
parseRegister21();
break;
case '\x26':
if((int)payloadIn[1] == 0)
{
// This works but LSB comes out as CW?
// Also, an opportunity to read the data mode
// payloadIn = payloadIn.right(3);
// this->parseMode();
}
break;
case '\x27':
// scope data
//qInfo(logRig()) << "Have scope data";
//printHex(payloadIn, false, true);
parseWFData();
//parseSpectrum();
break;
case '\x1A':
if(payloadIn[01] == '\x05')
{
parseDetailedRegisters1A05();
} else {
parseRegisters1A();
}
break;
case '\x1B':
parseRegister1B();
break;
case '\x1C':
parseRegisters1C();
break;
case '\xFB':
// Fine Business, ACK from rig.
break;
case '\xFA':
// error
qDebug(logRig()) << "Error (FA) received from rig.";
printHex(payloadIn, false ,true);
break;
default:
// This gets hit a lot when the pseudo-term is
// using commands wfview doesn't know yet.
// qInfo(logRig()) << "Have other data with cmd: " << std::hex << payloadIn[00];
// printHex(payloadIn, false, true);
break;
}
// is any payload left?
}
void rigCommander::parseLevels()
{
//qInfo(logRig()) << "Received a level status readout: ";
// printHex(payloadIn, false, true);
// wrong: unsigned char level = (payloadIn[2] * 100) + payloadIn[03];
unsigned char hundreds = payloadIn[2];
unsigned char tens = (payloadIn[3] & 0xf0) >> 4;
unsigned char units = (payloadIn[3] & 0x0f);
unsigned char level = ((unsigned char)100*hundreds) + (10*tens) + units;
//qInfo(logRig()) << "Level is: " << (int)level << " or " << 100.0*level/255.0 << "%";
// Typical RF gain response (rather low setting):
// "INDEX: 00 01 02 03 04 "
// "DATA: 14 02 00 78 fd "
if(payloadIn[0] == '\x14')
{
switch(payloadIn[1])
{
case '\x01':
// AF level - ignore if LAN connection.
if (udp == Q_NULLPTR) {
emit haveAfGain(level);
rigState.afGain = level;
}
break;
case '\x02':
// RX RF Gain
emit haveRfGain(level);
rigState.rfGain = level;
break;
case '\x03':
// Squelch level
emit haveSql(level);
rigState.squelch = level;
break;
case '\x07':
// Twin BPF Inner, or, IF-Shift level
if(rigCaps.hasTBPF)
emit haveTPBFInner(level);
else
emit haveIFShift(level);
break;
case '\x08':
// Twin BPF Outer
emit haveTPBFOuter(level);
break;
case '\x09':
// CW Pitch - ignore for now
break;
case '\x0A':
// TX RF level
emit haveTxPower(level);
rigState.txPower = level;
break;
case '\x0B':
// Mic Gain
emit haveMicGain(level);
rigState.micGain = level;
break;
case '\x0C':
// CW Keying Speed - ignore for now
break;
case '\x0D':
// Notch filder setting - ignore for now
break;
case '\x0E':
// compressor level
emit haveCompLevel(level);
rigState.compLevel = level;
break;
case '\x12':
// NB level - ignore for now
break;
case '\x15':
// monitor level
emit haveMonitorLevel(level);
rigState.monitorLevel = level;
break;
case '\x16':
// VOX gain
emit haveVoxGain(level);
rigState.voxGain = level;
break;
case '\x17':
// anti-VOX gain
emit haveAntiVoxGain(level);
rigState.antiVoxGain = level;
break;
default:
qInfo(logRig()) << "Unknown control level (0x14) received at register " << QString("0x%1").arg((int)payloadIn[1],2,16) << " with level " << QString("0x%1").arg((int)level,2,16) << ", int=" << (int)level;
printHex(payloadIn);
break;
}
return;
}
if(payloadIn[0] == '\x15')
{
switch(payloadIn[1])
{
case '\x02':
// S-Meter
emit haveMeter(meterS, level);
rigState.sMeter = level;
break;
case '\x04':
// Center (IC-R8600)
emit haveMeter(meterCenter, level);
rigState.sMeter = level;
break;
case '\x11':
// RF-Power meter
emit haveMeter(meterPower, level);
rigState.powerMeter = level;
break;
case '\x12':
// SWR
emit haveMeter(meterSWR, level);
rigState.swrMeter = level;
break;
case '\x13':
// ALC
emit haveMeter(meterALC, level);
rigState.alcMeter = level;
break;
case '\x14':
// COMP dB reduction
emit haveMeter(meterComp, level);
rigState.compMeter = level;
break;
case '\x15':
// VD (12V)
emit haveMeter(meterVoltage, level);
rigState.voltageMeter = level;
break;
case '\x16':
// ID
emit haveMeter(meterCurrent, level);
rigState.currentMeter = level;
break;
default:
qInfo(logRig()) << "Unknown meter level (0x15) received at register " << (unsigned int) payloadIn[1] << " with level " << level;
break;
}
return;
}
}
void rigCommander::setIFShift(unsigned char level)
{
QByteArray payload("\x14\x07");
payload.append(bcdEncodeInt(level));
prepDataAndSend(payload);
}
void rigCommander::setTPBFInner(unsigned char level)
{
QByteArray payload("\x14\x07");
payload.append(bcdEncodeInt(level));
prepDataAndSend(payload);
}
void rigCommander::setTPBFOuter(unsigned char level)
{
QByteArray payload("\x14\x08");
payload.append(bcdEncodeInt(level));
prepDataAndSend(payload);
}
void rigCommander::setTxPower(unsigned char power)
{
QByteArray payload("\x14\x0A");
payload.append(bcdEncodeInt(power));
prepDataAndSend(payload);
}
void rigCommander::setMicGain(unsigned char gain)
{
QByteArray payload("\x14\x0B");
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
void rigCommander::getModInput(bool dataOn)
{
setModInput(inputMic, dataOn, true);
}
void rigCommander::setModInput(rigInput input, bool dataOn)
{
setModInput(input, dataOn, false);
}
void rigCommander::setModInput(rigInput input, bool dataOn, bool isQuery)
{
// The input enum is as follows:
// inputMic=0,
// inputACC=1,
// inputUSB=3,
// inputLAN=5,
// inputACCA,
// inputACCB};
QByteArray payload;
QByteArray inAsByte;
if(isQuery)
input = inputMic;
switch(rigCaps.model)
{
case model9700:
payload.setRawData("\x1A\x05\x01\x15", 4);
payload.append((unsigned char)input);
break;
case model7610:
payload.setRawData("\x1A\x05\x00\x91", 4);
payload.append((unsigned char)input);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x66", 4);
payload.append((unsigned char)input);
break;
case model7850:
payload.setRawData("\x1A\x05\x00\x63", 4);
switch(input)
{
case inputMic:
inAsByte.setRawData("\x00", 1);
break;
case inputACCA:
inAsByte.setRawData("\x01", 1);
break;
case inputACCB:
inAsByte.setRawData("\x02", 1);
break;
case inputUSB:
inAsByte.setRawData("\x08", 1);
break;
case inputLAN:
inAsByte.setRawData("\x09", 1);
break;
default:
return;
}
payload.append(inAsByte);
break;
case model705:
payload.setRawData("\x1A\x05\x01\x18", 4);
switch(input)
{
case inputMic:
inAsByte.setRawData("\x00", 1);
break;
case inputUSB:
inAsByte.setRawData("\x01", 1);
break;
case inputLAN: // WLAN
inAsByte.setRawData("\x03", 1);
break;
default:
return;
}
payload.append(inAsByte);
break;
case model7700:
payload.setRawData("\x1A\x05\x00\x32", 4);
if(input==inputLAN)
{
// NOTE: CIV manual says data may range from 0 to 3
// But data 0x04 does correspond to LAN.
payload.append("\x04");
} else {
payload.append((unsigned char)input);
}
break;
case model7600:
payload.setRawData("\x1A\x05\x00\x30", 4);
payload.append((unsigned char)input);
break;
case model7100:
payload.setRawData("\x1A\x05\x00\x90", 4);
payload.append((unsigned char)input);
break;
case model7200:
payload.setRawData("\x1A\x03\x23", 3);
switch(input)
{
case inputMic:
payload.setRawData("\x00", 1);
break;
case inputUSB:
payload.setRawData("\x03", 1);
break;
case inputACC:
payload.setRawData("\x01", 1);
break;
default:
return;
}
default:
break;
}
if(dataOn)
{
if(rigCaps.model==model7200)
{
payload[2] = payload[2] + 1;
} else {
payload[3] = payload[3] + 1;
}
}
if(isQuery)
{
payload.truncate(4);
}
prepDataAndSend(payload);
}
void rigCommander::setModInputLevel(rigInput input, unsigned char level)
{
switch(input)
{
case inputMic:
setMicGain(level);
break;
case inputACCA:
setACCGain(level, 0);
break;
case inputACCB:
setACCGain(level, 1);
break;
case inputACC:
setACCGain(level);
break;
case inputUSB:
setUSBGain(level);
break;
case inputLAN:
setLANGain(level);
break;
default:
break;
}
}
void rigCommander::getModInputLevel(rigInput input)
{
switch(input)
{
case inputMic:
getMicGain();
break;
case inputACCA:
getACCGain(0);
break;
case inputACCB:
getACCGain(1);
break;
case inputACC:
getACCGain();
break;
case inputUSB:
getUSBGain();
break;
case inputLAN:
getLANGain();
break;
default:
break;
}
}
QByteArray rigCommander::getUSBAddr()
{
QByteArray payload;
switch(rigCaps.model)
{
case model705:
payload.setRawData("\x1A\x05\x01\x16", 4);
break;
case model9700:
payload.setRawData("\x1A\x05\x01\x13", 4);
break;
case model7200:
payload.setRawData("\x1A\x03\x25", 3);
break;
case model7100:
case model7610:
payload.setRawData("\x1A\x05\x00\x89", 4);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x65", 4);
break;
case model7850:
payload.setRawData("\x1A\x05\x00\x61", 4);
break;
case model7600:
payload.setRawData("\x1A\x05\x00\x29", 4);
break;
default:
break;
}
return payload;
}
void rigCommander::getUSBGain()
{
QByteArray payload = getUSBAddr();
prepDataAndSend(payload);
}
void rigCommander::setUSBGain(unsigned char gain)
{
QByteArray payload = getUSBAddr();
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
QByteArray rigCommander::getLANAddr()
{
QByteArray payload;
switch(rigCaps.model)
{
case model705:
payload.setRawData("\x1A\x05\x01\x17", 4);
break;
case model9700:
payload.setRawData("\x1A\x05\x01\x14", 4);
break;
case model7610:
payload.setRawData("\x1A\x05\x00\x90", 4);
break;
case model7850:
payload.setRawData("\x1A\x05\x00\x62", 4);
break;
case model7700:
payload.setRawData("\x1A\x05\x01\x92", 4);
break;
default:
break;
}
return payload;
}
void rigCommander::getLANGain()
{
QByteArray payload = getLANAddr();
prepDataAndSend(payload);
}
void rigCommander::setLANGain(unsigned char gain)
{
QByteArray payload = getLANAddr();
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
QByteArray rigCommander::getACCAddr(unsigned char ab)
{
QByteArray payload;
// Note: the manual for the IC-7600 does not call out a
// register to adjust the ACC gain.
// 7850: ACC-A = 0, ACC-B = 1
switch(rigCaps.model)
{
case model9700:
payload.setRawData("\x1A\x05\x01\x12", 4);
break;
case model7100:
payload.setRawData("\x1A\x05\x00\x87", 4);
break;
case model7610:
payload.setRawData("\x1A\x05\x00\x88", 4);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x64", 4);
break;
case model7850:
// Note: 0x58 = ACC-A, 0x59 = ACC-B
if(ab==0)
{
// A
payload.setRawData("\x1A\x05\x00\x58", 4);
} else {
// B
payload.setRawData("\x1A\x05\x00\x59", 4);
}
break;
case model7700:
payload.setRawData("\x1A\x05\x00\x30", 4);
break;
default:
break;
}
return payload;
}
void rigCommander::getACCGain()
{
QByteArray payload = getACCAddr(0);
prepDataAndSend(payload);
}
void rigCommander::getACCGain(unsigned char ab)
{
QByteArray payload = getACCAddr(ab);
prepDataAndSend(payload);
}
void rigCommander::setACCGain(unsigned char gain)
{
QByteArray payload = getACCAddr(0);
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
void rigCommander::setACCGain(unsigned char gain, unsigned char ab)
{
QByteArray payload = getACCAddr(ab);
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
void rigCommander::setCompLevel(unsigned char compLevel)
{
QByteArray payload("\x14\x0E");
payload.append(bcdEncodeInt(compLevel));
prepDataAndSend(payload);
}
void rigCommander::setMonitorLevel(unsigned char monitorLevel)
{
QByteArray payload("\x14\x0E");
payload.append(bcdEncodeInt(monitorLevel));
prepDataAndSend(payload);
}
void rigCommander::setVoxGain(unsigned char gain)
{
QByteArray payload("\x14\x16");
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
void rigCommander::setAntiVoxGain(unsigned char gain)
{
QByteArray payload("\x14\x17");
payload.append(bcdEncodeInt(gain));
prepDataAndSend(payload);
}
void rigCommander::getRfGain()
{
QByteArray payload("\x14\x02");
prepDataAndSend(payload);
}
void rigCommander::getAfGain()
{
QByteArray payload("\x14\x01");
prepDataAndSend(payload);
}
void rigCommander::getIFShift()
{
QByteArray payload("\x14\x07");
prepDataAndSend(payload);
}
void rigCommander::getTPBFInner()
{
QByteArray payload("\x14\x07");
prepDataAndSend(payload);
}
void rigCommander::getTPBFOuter()
{
QByteArray payload("\x14\x08");
prepDataAndSend(payload);
}
void rigCommander::getSql()
{
QByteArray payload("\x14\x03");
prepDataAndSend(payload);
}
void rigCommander::getTxLevel()
{
QByteArray payload("\x14\x0A");
prepDataAndSend(payload);
}
void rigCommander::getMicGain()
{
QByteArray payload("\x14\x0B");
prepDataAndSend(payload);
}
void rigCommander::getCompLevel()
{
QByteArray payload("\x14\x0E");
prepDataAndSend(payload);
}
void rigCommander::getMonitorLevel()
{
QByteArray payload("\x14\x15");
prepDataAndSend(payload);
}
void rigCommander::getVoxGain()
{
QByteArray payload("\x14\x16");
prepDataAndSend(payload);
}
void rigCommander::getAntiVoxGain()
{
QByteArray payload("\x14\x17");
prepDataAndSend(payload);
}
void rigCommander::getLevels()
{
// Function to grab all levels
getRfGain(); //0x02
getAfGain(); // 0x01
getSql(); // 0x03
getTxLevel(); // 0x0A
getMicGain(); // 0x0B
getCompLevel(); // 0x0E
// getMonitorLevel(); // 0x15
// getVoxGain(); // 0x16
// getAntiVoxGain(); // 0x17
}
void rigCommander::getMeters(meterKind meter)
{
switch(meter)
{
case meterS:
getSMeter();
break;
case meterCenter:
getCenterMeter();
break;
case meterSWR:
getSWRMeter();
break;
case meterPower:
getRFPowerMeter();
break;
case meterALC:
getALCMeter();
break;
case meterComp:
getCompReductionMeter();
break;
case meterVoltage:
getVdMeter();
break;
case meterCurrent:
getIDMeter();
break;
default:
break;
}
}
void rigCommander::getSMeter()
{
QByteArray payload("\x15\x02");
prepDataAndSend(payload);
}
void rigCommander::getCenterMeter()
{
QByteArray payload("\x15\x04");
prepDataAndSend(payload);
}
void rigCommander::getRFPowerMeter()
{
QByteArray payload("\x15\x11");
prepDataAndSend(payload);
}
void rigCommander::getSWRMeter()
{
QByteArray payload("\x15\x12");
prepDataAndSend(payload);
}
void rigCommander::getALCMeter()
{
QByteArray payload("\x15\x13");
prepDataAndSend(payload);
}
void rigCommander::getCompReductionMeter()
{
QByteArray payload("\x15\x14");
prepDataAndSend(payload);
}
void rigCommander::getVdMeter()
{
QByteArray payload("\x15\x15");
prepDataAndSend(payload);
}
void rigCommander::getIDMeter()
{
QByteArray payload("\x15\x16");
prepDataAndSend(payload);
}
void rigCommander::setSquelch(unsigned char level)
{
sendLevelCmd(0x03, level);
}
void rigCommander::setRfGain(unsigned char level)
{
sendLevelCmd(0x02, level);
}
void rigCommander::setAfGain(unsigned char level)
{
if (udp == Q_NULLPTR) {
sendLevelCmd(0x01, level);
}
else {
emit haveSetVolume(level);
}
}
void rigCommander::setRefAdjustCourse(unsigned char level)
{
// 1A 05 00 72 0000-0255
QByteArray payload;
payload.setRawData("\x1A\x05\x00\x72", 4);
payload.append(bcdEncodeInt((unsigned int)level));
prepDataAndSend(payload);
}
void rigCommander::setRefAdjustFine(unsigned char level)
{
qInfo(logRig()) << __FUNCTION__ << " level: " << level;
// 1A 05 00 73 0000-0255
QByteArray payload;
payload.setRawData("\x1A\x05\x00\x73", 4);
payload.append(bcdEncodeInt((unsigned int)level));
prepDataAndSend(payload);
}
void rigCommander::setTime(timekind t)
{
QByteArray payload;
switch(rigCaps.model)
{
case model705:
payload.setRawData("\x1A\x05\x01\x66", 4);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x95", 4);
break;
case model7610:
payload.setRawData("\x1A\x05\x01\x59", 4);
break;
case model7700:
payload.setRawData("\x1A\x05\x00\x59", 4);
break;
case model7850:
payload.setRawData("\x1A\x05\x00\x96", 4);
break;
case model9700:
payload.setRawData("\x1A\x05\x01\x80", 4);
break;
case modelR8600:
payload.setRawData("\x1A\x05\x01\x32", 4);
break;
default:
return;
break;
}
payload.append(convertNumberToHex(t.hours));
payload.append(convertNumberToHex(t.minutes));
//qDebug(logRig()) << "Setting time to this: ";
//printHex(payload);
prepDataAndSend(payload);
}
void rigCommander::setDate(datekind d)
{
QByteArray payload;
switch(rigCaps.model)
{
case model705:
payload.setRawData("\x1A\x05\x01\x65", 4);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x94", 4);
break;
case model7610:
payload.setRawData("\x1A\x05\x01\x58", 4);
break;
case model7700:
payload.setRawData("\x1A\x05\x00\x58", 4);
break;
case model7850:
payload.setRawData("\x1A\x05\x00\x95", 4);
break;
case model9700:
payload.setRawData("\x1A\x05\x01\x79", 4);
break;
case modelR8600:
payload.setRawData("\x1A\x05\x01\x31", 4);
break;
default:
return;
break;
}
// YYYYMMDD
payload.append(convertNumberToHex(d.year/100)); // 20
payload.append(convertNumberToHex(d.year - 100*(d.year/100))); // 21
payload.append(convertNumberToHex(d.month));
payload.append(convertNumberToHex(d.day));
//qDebug(logRig()) << "Setting date to this: ";
//printHex(payload);
prepDataAndSend(payload);
}
void rigCommander::setUTCOffset(timekind t)
{
QByteArray payload;
switch(rigCaps.model)
{
case model705:
payload.setRawData("\x1A\x05\x01\x70", 4);
break;
case model7300:
payload.setRawData("\x1A\x05\x00\x96", 4);
break;
case model7610:
payload.setRawData("\x1A\x05\x01\x62", 4);
break;
case model7700:
payload.setRawData("\x1A\x05\x00\x61", 4);
break;
case model7850:
// Clock 1:
payload.setRawData("\x1A\x05\x00\x99", 4);
break;
case model9700:
payload.setRawData("\x1A\x05\x01\x84", 4);
break;
case modelR8600:
payload.setRawData("\x1A\x05\x01\x35", 4);
break;
default:
return;
break;
}
payload.append(convertNumberToHex(t.hours));
payload.append(convertNumberToHex(t.minutes));
payload.append((unsigned char)t.isMinus);
//qDebug(logRig()) << "Setting UTC Offset to this: ";
//printHex(payload);
prepDataAndSend(payload);
}
unsigned char rigCommander::convertNumberToHex(unsigned char num)
{
// Two digit only
if(num > 99)
{
qInfo(logRig()) << "Invalid numeric conversion from num " << num << " to hex.";
return 0xFA;
}
unsigned char result = 0;
result = (num/10) << 4;
result |= (num - 10*(num/10));
qDebug(logRig()) << "Converting number: " << num << " to hex: " + QString("0x%1").arg(result, 2, 16, QChar('0'));
return result;
}
void rigCommander::sendLevelCmd(unsigned char levAddr, unsigned char level)
{
QByteArray payload("\x14");
payload.append(levAddr);
// careful here. The value in the units and tens can't exceed 99.
// ie, can't do this: 01 f2
payload.append((int)level/100); // make sure it works with a zero
// convert the tens:
int tens = (level - 100*((int)level/100))/10;
// convert the units:
int units = level - 100*((int)level/100);
units = units - 10*((int)(units/10));
// combine and send:
payload.append((tens << 4) | (units) ); // make sure it works with a zero
prepDataAndSend(payload);
}
void rigCommander::getRefAdjustCourse()
{
// 1A 05 00 72
QByteArray payload;
payload.setRawData("\x1A\x05\x00\x72", 4);
prepDataAndSend(payload);
}
void rigCommander::getRefAdjustFine()
{
// 1A 05 00 73
QByteArray payload;
payload.setRawData("\x1A\x05\x00\x73", 4);
prepDataAndSend(payload);
}
void rigCommander::parseRegisters1C()
{
// PTT lives here
// Not sure if 02 is the right place to switch.
// TODO: test this function
switch(payloadIn[01])
{
case '\x00':
parsePTT();
break;
case '\x01':
// ATU status (on/off/tuning)
parseATU();
break;
default:
break;
}
}
void rigCommander::parseRegister21()
{
// Register 21 is RIT and Delta TX
int ritHz = 0;
freqt f;
QByteArray longfreq;
// Example RIT value reply:
// Index: 00 01 02 03 04 05
// DATA: 21 00 32 03 00 fd
switch(payloadIn[01])
{
case '\x00':
// RIT frequency
//
longfreq = payloadIn.mid(2,2);
longfreq.append(QByteArray(3,'\x00'));
f = parseFrequency(longfreq, 3);
if(payloadIn.length() < 5)
break;
ritHz = f.Hz*((payloadIn.at(4)=='\x01')?-1:1);
emit haveRitFrequency(ritHz);
break;
case '\x01':
// RIT on/off
if(payloadIn.at(02) == '\x01')
{
emit haveRitEnabled(true);
} else {
emit haveRitEnabled(false);
}
break;
case '\x02':
// Delta TX setting on/off
break;
default:
break;
}
}
void rigCommander::parseATU()
{
// qInfo(logRig()) << "Have ATU status from radio. Emitting.";
// Expect:
// [0]: 0x1c
// [1]: 0x01
// [2]: 0 = off, 0x01 = on, 0x02 = tuning in-progress
emit haveATUStatus((unsigned char) payloadIn[2]);
}
void rigCommander::parsePTT()
{
// read after payloadIn[02]
if(payloadIn[2] == (char)0)
{
// PTT off
emit havePTTStatus(false);
} else {
// PTT on
emit havePTTStatus(true);
}
rigState.ptt = (bool)payloadIn[2];
}
void rigCommander::parseRegisters1A()
{
// The simpler of the 1A stuff:
// 1A 06: data mode on/off
// 07: IP+ enable/disable
// 00: memory contents
// 01: band stacking memory contents (last freq used is stored here per-band)
// 03: filter width
// 04: AGC rate
// qInfo(logRig()) << "Looking at register 1A :";
// printHex(payloadIn, false, true);
// "INDEX: 00 01 02 03 04 "
// "DATA: 1a 06 01 03 fd " (data mode enabled, filter width 3 selected)
switch(payloadIn[01])
{
case '\x00':
// Memory contents
break;
case '\x01':
// band stacking register
parseBandStackReg();
break;
case '\x06':
// data mode
// emit havedataMode( (bool) payloadIn[somebit])
// index
// 03 04
// XX YY
// XX = 00 (off) or 01 (on)
// YY: filter selected, 01 through 03.;
// if YY is 00 then XX was also set to 00
emit haveDataMode((bool)payloadIn[03]);
rigState.datamode = (bool)payloadIn[03];
break;
case '\x07':
// IP+ status
break;
default:
break;
}
}
void rigCommander::parseRegister1B()
{
quint16 tone=0;
bool tinv = false;
bool rinv = false;
switch(payloadIn[01])
{
case '\x00':
// "Repeater tone"
tone = decodeTone(payloadIn);
emit haveTone(tone);
rigState.ctcss = tone;
break;
case '\x01':
// "TSQL tone"
tone = decodeTone(payloadIn);
emit haveTSQL(tone);
rigState.tsql = tone;
break;
case '\x02':
// DTCS (DCS)
tone = decodeTone(payloadIn, tinv, rinv);
emit haveDTCS(tone, tinv, rinv);
rigState.dtcs = tone;
break;
case '\x07':
// "CSQL code (DV mode)"
tone = decodeTone(payloadIn);
rigState.csql = tone;
break;
default:
break;
}
}
void rigCommander::parseRegister16()
{
//"INDEX: 00 01 02 03 "
//"DATA: 16 5d 00 fd "
// ^-- mode info here
switch(payloadIn.at(1))
{
case '\x5d':
emit haveRptAccessMode((rptAccessTxRx)payloadIn.at(2));
break;
case '\x02':
// Preamp
emit havePreamp((unsigned char)payloadIn.at(2));
rigState.preamp = (unsigned char)payloadIn.at(2);
break;
default:
break;
}
}
void rigCommander::parseBandStackReg()
{
//qInfo(logRig()) << "Band stacking register response received: ";
//printHex(payloadIn, false, true);
// Reference output, 20 meters, regCode 01 (latest):
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 "
// "DATA: 1a 01 05 01 60 03 23 14 00 00 03 10 00 08 85 00 08 85 fd "
char band = payloadIn[2];
char regCode = payloadIn[3];
freqt freqs = parseFrequency(payloadIn, 7);
//float freq = (float)freqs.MHzDouble;
bool dataOn = (payloadIn[11] & 0x10) >> 4; // not sure...
char mode = payloadIn[9];
char filter = payloadIn[10];
// 09, 10 mode
// 11 digit RH: data mode on (1) or off (0)
// 11 digit LH: CTCSS 0 = off, 1 = TONE, 2 = TSQL
// 12, 13 : tone freq setting
// 14, 15 tone squelch freq setting
// if more, memory name (label) ascii
qInfo(logRig()) << "BSR in rigCommander: band: " << QString("%1").arg(band) << " regCode: " << (QString)regCode << " freq Hz: " << freqs.Hz << ", mode: " << (unsigned int)mode << ", filter: " << (unsigned int)filter << " data: " << dataOn;
//qInfo(logRig()) << "mode: " << (QString)mode << " dataOn: " << dataOn;
//qInfo(logRig()) << "Freq Hz: " << freqs.Hz;
emit haveBandStackReg(freqs, mode, filter, dataOn);
}
void rigCommander::parseDetailedRegisters1A05()
{
// It seems a lot of misc stuff is under this command and subcommand.
// 1A 05 ...
// 00 01 02 03 04 ...
// 02 and 03 make up a BCD'd number:
// 0001, 0002, 0003, ... 0101, 0102, 0103...
// 04 is a typical single byte response
// 04 05 is a typical 0-255 response
// This file processes the registers which are radically different in each model.
// It is a work in progress.
// TODO: inputMod source and gain for models: 7700, and 7600
int level = (100*bcdHexToUChar(payloadIn[4])) + bcdHexToUChar(payloadIn[5]);
int subcmd = bcdHexToUChar(payloadIn[3]) + (100*bcdHexToUChar(payloadIn[2]));
rigInput input;
input = (rigInput)bcdHexToUChar(payloadIn[4]);
int inputRaw = bcdHexToUChar(payloadIn[4]);
switch(rigCaps.model)
{
case model9700:
switch(subcmd)
{
case 72:
// course reference
emit haveRefAdjustCourse( bcdHexToUChar(payloadIn[5]) + (100*bcdHexToUChar(payloadIn[4])) );
break;
case 73:
// fine reference
emit haveRefAdjustFine( bcdHexToUChar(payloadIn[5]) + (100*bcdHexToUChar(payloadIn[4])) );
break;
case 112:
emit haveACCGain(level, 5);
break;
case 113:
emit haveUSBGain(level);
break;
case 114:
emit haveLANGain(level);
break;
case 115:
emit haveModInput(input, false);
break;
case 116:
emit haveModInput(input, true);
break;
default:
break;
}
break;
case model7850:
switch(subcmd)
{
case 63:
switch(inputRaw)
{
case 0:
input = inputMic;
break;
case 1:
input = inputACCA;
break;
case 2:
input = inputACCB;
break;
case 8:
input = inputUSB;
break;
case 9:
input = inputLAN;
break;
default:
input = inputUnknown;
break;
}
emit haveModInput(input, false);
break;
case 64:
switch(inputRaw)
{
case 0:
input = inputMic;
break;
case 1:
input = inputACCA;
break;
case 2:
input = inputACCB;
break;
case 8:
input = inputUSB;
break;
case 9:
input = inputLAN;
break;
default:
input = inputUnknown;
break;
}
emit haveModInput(input, true);
break;
case 58:
emit haveACCGain(level, 0);
break;
case 59:
emit haveACCGain(level, 1);
break;
case 61:
emit haveUSBGain(level);
break;
case 62:
emit haveLANGain(level);
break;
default:
break;
}
break;
case model7610:
switch(subcmd)
{
case 91:
emit haveModInput(input, false);
break;
case 92:
emit haveModInput(input, true);
break;
case 88:
emit haveACCGain(level, 5);
break;
case 89:
emit haveUSBGain(level);
break;
case 90:
emit haveLANGain(level);
break;
default:
break;
}
return;
case model7600:
switch(subcmd)
{
case 30:
emit haveModInput(input, false);
break;
case 31:
emit haveModInput(input, true);
break;
case 29:
emit haveUSBGain(level);
break;
default:
break;
}
return;
case model7300:
switch(subcmd)
{
case 64:
emit haveACCGain(level, 5);
break;
case 65:
emit haveUSBGain(level);
break;
case 66:
emit haveModInput(input, false);
break;
case 67:
emit haveModInput(input, true);
break;
default:
break;
}
return;
case model7100:
switch(subcmd)
{
case 87:
emit haveACCGain(level, 5);
break;
case 89:
emit haveUSBGain(level);
break;
case 90:
emit haveModInput(input, false);
break;
case 91:
emit haveModInput(input, true);
break;
default:
break;
}
break;
case model705:
switch(subcmd)
{
case 116:
emit haveUSBGain(level);
break;
case 117:
emit haveLANGain(level);
break;
case 118:
switch(inputRaw)
{
case 0:
input = inputMic;
break;
case 1:
input = inputUSB;
break;
case 3:
input = inputLAN;
break;
default:
input = inputUnknown;
break;
}
emit haveModInput(input, false);
break;
case 119:
switch(inputRaw)
{
case 0:
input = inputMic;
break;
case 1:
input = inputUSB;
break;
case 3:
input = inputLAN;
break;
default:
input = inputUnknown;
break;
}
emit haveModInput(input, true);
break;
default:
break;
}
break;
default:
break;
}
}
void rigCommander::parseWFData()
{
freqt freqSpan;
bool isSub;
switch(payloadIn[1])
{
case 0:
// Chunk of spectrum
parseSpectrum();
break;
case 0x10:
// confirming scope is on
break;
case 0x11:
// confirming output enabled/disabled of wf data.
break;
case 0x14:
// fixed or center
emit haveSpectrumMode(static_cast<spectrumMode>((unsigned char)payloadIn[3]));
// [1] 0x14
// [2] 0x00
// [3] 0x00 (center), 0x01 (fixed), 0x02, 0x03
break;
case 0x15:
// read span in center mode
// [1] 0x15
// [2] to [8] is span encoded as a frequency
isSub = payloadIn.at(2)==0x01;
freqSpan = parseFrequency(payloadIn, 6);
emit haveScopeSpan(freqSpan, isSub);
qInfo(logRig()) << "Received 0x15 center span data: for frequency " << freqSpan.Hz;
//printHex(payloadIn, false, true);
break;
case 0x16:
// read edge mode center in edge mode
emit haveScopeEdge((char)payloadIn[2]);
qInfo(logRig()) << "Received 0x16 edge in center mode:";
printHex(payloadIn, false, true);
// [1] 0x16
// [2] 0x01, 0x02, 0x03: Edge 1,2,3
break;
case 0x17:
// Hold status (only 9700?)
qInfo(logRig()) << "Received 0x17 hold status - need to deal with this!";
printHex(payloadIn, false, true);
break;
case 0x19:
// scope reference level
// [1] 0x19
// [2] 0x00
// [3] 10dB digit, 1dB digit
// [4] 0.1dB digit, 0
// [5] 0x00 = +, 0x01 = -
parseSpectrumRefLevel();
break;
default:
qInfo(logRig()) << "Unknown waveform data received: ";
printHex(payloadIn, false, true);
break;
}
}
mode_info rigCommander::createMode(mode_kind m, unsigned char reg, QString name)
{
mode_info mode;
mode.mk = m;
mode.reg = reg;
mode.name = name;
return mode;
}
centerSpanData rigCommander::createScopeCenter(centerSpansType s, QString name)
{
centerSpanData csd;
csd.cstype = s;
csd.name = name;
return csd;
}
void rigCommander::determineRigCaps()
{
//TODO: Determine available bands (low priority, rig will reject out of band requests anyway)
std::vector <bandType> standardHF;
std::vector <bandType> standardVU;
// Most commonly supported "HF" bands:
standardHF = {band6m, band10m, band10m, band12m,
band15m, band17m, band20m, band30m,
band40m, band60m, band80m, band160m};
standardVU = {band70cm, band2m};
std::vector <mode_info> commonModes;
commonModes = { createMode(modeLSB, 0x00, "LSB"), createMode(modeUSB, 0x01, "USB"),
createMode(modeFM, 0x05, "FM"), createMode(modeAM, 0x02, "AM"),
createMode(modeCW, 0x03, "CW"), createMode(modeCW_R, 0x07, "CW-R"),
createMode(modeRTTY, 0x04, "RTTY"), createMode(modeRTTY_R, 0x08, "RTTY-R")
};
rigCaps.model = model;
rigCaps.civ = incomingCIVAddr;
rigCaps.hasDD = false;
rigCaps.hasDV = false;
rigCaps.hasDataModes = true; // USB-D, LSB-D, etc
rigCaps.hasATU = false;
rigCaps.hasCTCSS = false;
rigCaps.hasDTCS = false;
rigCaps.hasTBPF = false;
rigCaps.hasIFShift = false;
rigCaps.spectSeqMax = 0;
rigCaps.spectAmpMax = 0;
rigCaps.spectLenMax = 0;
rigCaps.scopeCenterSpans = { createScopeCenter(cs2p5k, "±2.5k"), createScopeCenter(cs5k, "±5k"),
createScopeCenter(cs10k, "±10k"), createScopeCenter(cs25k, "±25k"),
createScopeCenter(cs50k, "±50k"), createScopeCenter(cs100k, "±100k"),
createScopeCenter(cs250k, "±250k"), createScopeCenter(cs500k, "±500k")
};
rigCaps.hasFDcomms = true; // false for older radios
// Clear inputs/preamps/attenuators lists in case we have re-connected.
rigCaps.preamps.clear();
rigCaps.attenuators.clear();
rigCaps.inputs.clear();
rigCaps.inputs.append(inputMic);
rigCaps.hasAttenuator = true; // Verify that all recent rigs have attenuators
rigCaps.attenuators.push_back('\x00');
rigCaps.hasPreamp = true;
rigCaps.preamps.push_back('\x00');
rigCaps.hasAntennaSel = false;
rigCaps.hasRXAntenna = false;
rigCaps.hasTransmit = true;
rigCaps.hasPTTCommand = true;
rigCaps.useRTSforPTT = false;
// Common, reasonable defaults for most supported HF rigs:
rigCaps.bsr[band160m] = 0x01;
rigCaps.bsr[band80m] = 0x02;
rigCaps.bsr[band40m] = 0x03;
rigCaps.bsr[band30m] = 0x04;
rigCaps.bsr[band20m] = 0x05;
rigCaps.bsr[band17m] = 0x06;
rigCaps.bsr[band15m] = 0x07;
rigCaps.bsr[band12m] = 0x08;
rigCaps.bsr[band10m] = 0x09;
rigCaps.bsr[band6m] = 0x10;
rigCaps.bsr[bandGen] = 0x11;
// Bands that seem to change with every model:
rigCaps.bsr[band2m] = 0x00;
rigCaps.bsr[band70cm] = 0x00;
rigCaps.bsr[band23cm] = 0x00;
// These bands generally aren't defined:
rigCaps.bsr[band4m] = 0x00;
rigCaps.bsr[band60m] = 0x00;
rigCaps.bsr[bandWFM] = 0x00;
rigCaps.bsr[bandAir] = 0x00;
rigCaps.bsr[band630m] = 0x00;
rigCaps.bsr[band2200m] = 0x00;
switch(model){
case model7300:
rigCaps.modelName = QString("IC-7300");
rigCaps.rigctlModel = 3073;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x20');
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.bands = standardHF;
rigCaps.bands.push_back(band4m);
rigCaps.bands.push_back(bandGen);
rigCaps.bands.push_back(band630m);
rigCaps.bands.push_back(band2200m);
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x71");
break;
case modelR8600:
rigCaps.modelName = QString("IC-R8600");
rigCaps.rigctlModel = 3079;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.inputs.clear();
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
rigCaps.hasTransmit = false;
rigCaps.hasPTTCommand = false;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasDV = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x10');
rigCaps.attenuators.push_back('\x20');
rigCaps.attenuators.push_back('\x30');
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.hasAntennaSel = true;
rigCaps.antennas = {0x00, 0x01, 0x02};
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.insert(rigCaps.bands.end(), {band23cm, band4m, band630m, band2200m, bandGen});
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {
createMode(modeWFM, 0x06, "WFM"), createMode(modeS_AMD, 0x11, "S-AM (D)"),
createMode(modeS_AML, 0x14, "S-AM(L)"), createMode(modeS_AMU, 0x15, "S-AM(U)"),
createMode(modeP25, 0x16, "P25"), createMode(modedPMR, 0x18, "dPMR"),
createMode(modeNXDN_VN, 0x19, "NXDN-VN"), createMode(modeNXDN_N, 0x20, "NXDN-N"),
createMode(modeDCR, 0x21, "DCR")});
rigCaps.scopeCenterSpans.insert(rigCaps.scopeCenterSpans.end(), {createScopeCenter(cs1M, "±1M"), createScopeCenter(cs2p5M, "±2.5M")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x92");
break;
case model9700:
rigCaps.modelName = QString("IC-9700");
rigCaps.rigctlModel = 3081;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.inputs.append(inputLAN);
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
rigCaps.hasDD = true;
rigCaps.hasDV = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x10');
rigCaps.preamps.push_back('\x01');
rigCaps.bands = standardVU;
rigCaps.bands.push_back(band23cm);
rigCaps.bsr[band23cm] = 0x03;
rigCaps.bsr[band70cm] = 0x02;
rigCaps.bsr[band2m] = 0x01;
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modeDV, 0x17, "DV"),
createMode(modeDD, 0x22, "DD")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x01\x27");
break;
case model910h:
rigCaps.modelName = QString("IC-910H");
rigCaps.rigctlModel = 3044;
rigCaps.hasSpectrum = false;
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasDD = false;
rigCaps.hasDV = false;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasATU = false;
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x10' , '\x20', '\x30'});
rigCaps.preamps.push_back('\x01');
rigCaps.bands = standardVU;
rigCaps.bands.push_back(band23cm);
rigCaps.bsr[band23cm] = 0x03;
rigCaps.bsr[band70cm] = 0x02;
rigCaps.bsr[band2m] = 0x01;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x58");
break;
case model7600:
rigCaps.modelName = QString("IC-7600");
rigCaps.rigctlModel = 3063;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputACC);
rigCaps.inputs.append(inputUSB);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = false;
rigCaps.hasDTCS = false;
rigCaps.hasTBPF = true;
rigCaps.attenuators.insert(rigCaps.attenuators.end(), {0x00, 0x06, 0x12, 0x18});
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modePSK, 0x12, "PSK"),
createMode(modePSK_R, 0x13, "PSK-R")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x97");
break;
case model7610:
rigCaps.modelName = QString("IC-7610");
rigCaps.rigctlModel = 3078;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 15;
rigCaps.spectAmpMax = 200;
rigCaps.spectLenMax = 689;
rigCaps.inputs.append(inputLAN);
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
rigCaps.hasCTCSS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.insert(rigCaps.attenuators.end(),
{'\x03', '\x06', '\x09', '\x12',\
'\x15', '\x18', '\x21', '\x24',\
'\x27', '\x30', '\x33', '\x36',
'\x39', '\x42', '\x45'});
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.hasAntennaSel = true;
rigCaps.antennas = {0x00, 0x01};
rigCaps.hasATU = true;
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bands.push_back(band630m);
rigCaps.bands.push_back(band2200m);
rigCaps.modes = commonModes;
rigCaps.hasRXAntenna = true;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x01\x12");
break;
case model7850:
rigCaps.modelName = QString("IC-785x");
rigCaps.rigctlModel = 3075;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 15;
rigCaps.spectAmpMax = 136;
rigCaps.spectLenMax = 689;
rigCaps.inputs.append(inputLAN);
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACCA);
rigCaps.inputs.append(inputACCB);
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.insert(rigCaps.attenuators.end(),
{'\x03', '\x06', '\x09',
'\x12', '\x15', '\x18', '\x21'});
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.hasAntennaSel = true;
rigCaps.antennas = {0x00, 0x01, 0x02, 0x03};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bands.push_back(band630m);
rigCaps.bands.push_back(band2200m);
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modePSK, 0x12, "PSK"),
createMode(modePSK_R, 0x13, "PSK-R")});
rigCaps.hasRXAntenna = true;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x01\x55");
break;
case model705:
rigCaps.modelName = QString("IC-705");
rigCaps.rigctlModel = 3085;
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.inputs.append(inputLAN);
rigCaps.inputs.append(inputUSB);
rigCaps.hasLan = true;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = true;
rigCaps.hasDD = true;
rigCaps.hasDV = true;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x10' , '\x20'});
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.push_back(bandGen);
rigCaps.bands.push_back(bandAir);
rigCaps.bands.push_back(bandWFM);
rigCaps.bsr[band70cm] = 0x14;
rigCaps.bsr[band2m] = 0x13;
rigCaps.bsr[bandAir] = 0x12;
rigCaps.bsr[bandWFM] = 0x11;
rigCaps.bsr[bandGen] = 0x15;
rigCaps.bands.push_back(band630m);
rigCaps.bands.push_back(band2200m);
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modeWFM, 0x06, "WFM"),
createMode(modeDV, 0x17, "DV")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x01\x31");
break;
case model7000:
rigCaps.modelName = QString("IC-7000");
rigCaps.rigctlModel = 3060;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x12');
rigCaps.preamps.push_back('\x01');
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[band2m] = 0x11;
rigCaps.bsr[band70cm] = 0x12;
rigCaps.bsr[bandGen] = 0x13;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x92");
break;
case model7410:
rigCaps.modelName = QString("IC-7410");
rigCaps.rigctlModel = 3067;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = true;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x20');
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x40");
break;
case model7100:
rigCaps.modelName = QString("IC-7100");
rigCaps.rigctlModel = 3070;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x12');
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.push_back(band4m);
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[band2m] = 0x11;
rigCaps.bsr[band70cm] = 0x12;
rigCaps.bsr[bandGen] = 0x13;
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modeWFM, 0x06, "WFM"),
createMode(modeDV, 0x17, "DV")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x95");
break;
case model7200:
rigCaps.modelName = QString("IC-7200");
rigCaps.rigctlModel = 3061;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputUSB);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasCTCSS = true;
rigCaps.hasDTCS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.push_back('\x20');
rigCaps.preamps.push_back('\x01');
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x03\x48");
break;
case model7700:
rigCaps.modelName = QString("IC-7700");
rigCaps.rigctlModel = 3062;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputLAN);
//rigCaps.inputs.append(inputSPDIF);
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
rigCaps.hasCTCSS = true;
rigCaps.hasTBPF = true;
rigCaps.attenuators.insert(rigCaps.attenuators.end(),
{'\x06', '\x12', '\x18'});
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.hasAntennaSel = true;
rigCaps.antennas = {0x00, 0x01, 0x02, 0x03}; // not sure if 0x03 works
rigCaps.hasATU = true;
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bands.push_back(band630m);
rigCaps.bands.push_back(band2200m);
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modePSK, 0x12, "PSK"),
createMode(modePSK_R, 0x13, "PSK-R")});
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x95");
break;
case model706:
rigCaps.modelName = QString("IC-706");
rigCaps.rigctlModel = 3009;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasPTTCommand = false;
rigCaps.useRTSforPTT = true;
rigCaps.hasDataModes = false;
rigCaps.attenuators.push_back('\x20');
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.push_back(bandGen);
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), createMode(modeWFM, 0x06, "WFM"));
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
break;
case model718:
rigCaps.modelName = QString("IC-718");
rigCaps.rigctlModel = 3013;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = false;
rigCaps.hasPTTCommand = false;
rigCaps.useRTSforPTT = true;
rigCaps.hasIFShift = true;
rigCaps.hasDataModes = false;
rigCaps.attenuators.push_back('\x20');
rigCaps.preamps.push_back('\x01');
rigCaps.bands = {band10m, band10m, band12m,
band15m, band17m, band20m, band30m,
band40m, band60m, band80m, band160m, bandGen};
rigCaps.modes = { createMode(modeLSB, 0x00, "LSB"), createMode(modeUSB, 0x01, "USB"),
createMode(modeAM, 0x02, "AM"),
createMode(modeCW, 0x03, "CW"), createMode(modeCW_R, 0x07, "CW-R"),
createMode(modeRTTY, 0x04, "RTTY"), createMode(modeRTTY_R, 0x08, "RTTY-R")
};
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
break;
case model736:
rigCaps.modelName = QString("IC-736");
rigCaps.rigctlModel = 3020;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = false;
rigCaps.hasPTTCommand = false;
rigCaps.useRTSforPTT = true;
rigCaps.hasDataModes = false;
rigCaps.hasIFShift = true; // untested
rigCaps.attenuators.push_back('\x20');
rigCaps.preamps.push_back('\x01');
rigCaps.bands = standardHF;
rigCaps.modes = { createMode(modeLSB, 0x00, "LSB"), createMode(modeUSB, 0x01, "USB"),
createMode(modeAM, 0x02, "AM"), createMode(modeFM, 0x05, "FM"),
createMode(modeCW, 0x03, "CW"), createMode(modeCW_R, 0x07, "CW-R"),
};
break;
case model756pro:
rigCaps.modelName = QString("IC-756 Pro");
rigCaps.rigctlModel = 3027;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasTBPF = true;
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x06' , '\x12', '\x18'});
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
break;
case model756proii:
rigCaps.modelName = QString("IC-756 Pro II");
rigCaps.rigctlModel = 3027;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasTBPF = true;
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x06' , '\x12', '\x18'});
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
break;
case model756proiii:
rigCaps.modelName = QString("IC-756 Pro III");
rigCaps.rigctlModel = 3027;
rigCaps.hasSpectrum = false;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasTBPF = true;
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x06' , '\x12', '\x18'});
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[bandGen] = 0x11;
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
break;
case model9100:
rigCaps.modelName = QString("IC-9100");
rigCaps.rigctlModel = 3068;
rigCaps.hasSpectrum = false;
rigCaps.inputs.append(inputUSB); // TODO, add commands for this radio's inputs
rigCaps.inputs.append(inputACC);
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasATU = true;
rigCaps.hasDV = true;
rigCaps.hasTBPF = true;
rigCaps.preamps.push_back('\x01');
rigCaps.preamps.push_back('\x02');
rigCaps.attenuators.insert(rigCaps.attenuators.end(),{ '\x20' });
rigCaps.antennas = {0x00, 0x01};
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.push_back(band23cm);
rigCaps.bands.push_back(bandGen);
rigCaps.bsr[band2m] = 0x11;
rigCaps.bsr[band70cm] = 0x12;
rigCaps.bsr[band23cm] = 0x13;
rigCaps.bsr[bandGen] = 0x14;
rigCaps.modes = commonModes;
rigCaps.modes.insert(rigCaps.modes.end(), {createMode(modeDV, 0x17, "DV")});
break;
default:
rigCaps.modelName = QString("IC-0x%1").arg(rigCaps.modelID, 2, 16);
rigCaps.hasSpectrum = false;
rigCaps.spectSeqMax = 0;
rigCaps.spectAmpMax = 0;
rigCaps.spectLenMax = 0;
rigCaps.inputs.clear();
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
rigCaps.hasFDcomms = false;
rigCaps.hasPreamp = false;
rigCaps.hasAntennaSel = false;
rigCaps.attenuators.push_back('\x10');
rigCaps.attenuators.push_back('\x12');
rigCaps.attenuators.push_back('\x20');
rigCaps.bands = standardHF;
rigCaps.bands.insert(rigCaps.bands.end(), standardVU.begin(), standardVU.end());
rigCaps.bands.insert(rigCaps.bands.end(), {band23cm, band4m, band630m, band2200m, bandGen});
rigCaps.modes = commonModes;
rigCaps.transceiveCommand = QByteArrayLiteral("\x1a\x05\x00\x00");
qInfo(logRig()) << "Found unknown rig: 0x" << QString("%1").arg(rigCaps.modelID, 2, 16);
break;
}
haveRigCaps = true;
if(!usingNativeLAN)
comm->setUseRTSforPTT(rigCaps.useRTSforPTT);
if(lookingForRig)
{
lookingForRig = false;
foundRig = true;
qDebug(logRig()) << "---Rig FOUND from broadcast query:";
this->civAddr = incomingCIVAddr; // Override and use immediately.
payloadPrefix = QByteArray("\xFE\xFE");
payloadPrefix.append(civAddr);
payloadPrefix.append((char)compCivAddr);
// if there is a compile-time error, remove the following line, the "hex" part is the issue:
qInfo(logRig()) << "Using incomingCIVAddr: (int): " << this->civAddr << " hex: " << hex << this->civAddr;
emit discoveredRigID(rigCaps);
} else {
if(!foundRig)
{
emit discoveredRigID(rigCaps);
foundRig = true;
}
emit haveRigID(rigCaps);
}
}
void rigCommander::parseSpectrum()
{
if(!haveRigCaps)
{
qDebug(logRig()) << "Spectrum received in rigCommander, but rigID is incomplete.";
return;
}
if(rigCaps.spectSeqMax == 0)
{
// there is a chance this will happen with rigs that support spectrum. Once our RigID query returns, we will parse correctly.
qInfo(logRig()) << "Warning: Spectrum sequence max was zero, yet spectrum was received.";
return;
}
// Here is what to expect:
// payloadIn[00] = '\x27';
// payloadIn[01] = '\x00';
// payloadIn[02] = '\x00';
//
// Example long: (sequences 2-10, 50 pixels)
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 "
// "DATA: 27 00 00 07 11 27 13 15 01 00 22 21 09 08 06 19 0e 20 23 25 2c 2d 17 27 29 16 14 1b 1b 21 27 1a 18 17 1e 21 1b 24 21 22 23 13 19 23 2f 2d 25 25 0a 0e 1e 20 1f 1a 0c fd "
// ^--^--(seq 7/11)
// ^-- start waveform data 0x00 to 0xA0, index 05 to 54
//
// Example medium: (sequence #11)
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 "
// "DATA: 27 00 00 11 11 0b 13 21 23 1a 1b 22 1e 1a 1d 13 21 1d 26 28 1f 19 1a 18 09 2c 2c 2c 1a 1b fd "
// Example short: (sequence #1) includes center/fixed mode at [05]. No pixels.
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 "
// "DATA: 27 00 00 01 11 01 00 00 00 14 00 00 00 35 14 00 00 fd "
// ^-- mode 00 (center) or 01 (fixed)
// ^--14.00 MHz lower edge
// ^-- 14.350 MHz upper edge
// ^-- possibly 00=in range 01 = out of range
// Note, the index used here, -1, matches the ICD in the owner's manual.
// Owner's manual + 1 = our index.
// divs: Mode: Waveinfo: Len: Comment:
// 2-10 var var 56 Minimum wave information w/waveform data
// 11 10 26 31 Minimum wave information w/waveform data
// 1 1 0 18 Only Wave Information without waveform data
freqt fStart;
freqt fEnd;
unsigned char sequence = bcdHexToUChar(payloadIn[03]);
//unsigned char sequenceMax = bcdHexToDecimal(payloadIn[04]);
// unsigned char waveInfo = payloadIn[06]; // really just one byte?
//qInfo(logRig()) << "Spectrum Data received: " << sequence << "/" << sequenceMax << " mode: " << scopeMode << " waveInfo: " << waveInfo << " length: " << payloadIn.length();
// Sequnce 2, index 05 is the start of data
// Sequence 11. index 05, is the last chunk
// Sequence 11, index 29, is the actual last pixel (it seems)
// It looks like the data length may be variable, so we need to detect it each time.
// start at payloadIn.length()-1 (to override the FD). Never mind, index -1 bad.
// chop off FD.
if ((sequence == 1) && (sequence < rigCaps.spectSeqMax))
{
spectrumMode scopeMode = (spectrumMode)bcdHexToUChar(payloadIn[05]); // 0=center, 1=fixed
if(scopeMode != oldScopeMode)
{
//TODO: support the other two modes (firmware 1.40)
// Modes:
// 0x00 Center
// 0x01 Fixed
// 0x02 Scroll-C
// 0x03 Scroll-F
emit haveSpectrumMode(scopeMode);
oldScopeMode = scopeMode;
}
// wave information
spectrumLine.clear();
// For Fixed, and both scroll modes, the following produces correct information:
fStart = parseFrequency(payloadIn, 9);
spectrumStartFreq = fStart.MHzDouble;
fEnd = parseFrequency(payloadIn, 14);
spectrumEndFreq = fEnd.MHzDouble;
if(scopeMode == spectModeCenter)
{
// "center" mode, start is actuall center, end is bandwidth.
spectrumStartFreq -= spectrumEndFreq;
spectrumEndFreq = spectrumStartFreq + 2*(spectrumEndFreq);
// emit haveSpectrumCenterSpan(span);
}
if (payloadIn.length() > 400) // Must be a LAN packet.
{
payloadIn.chop(1);
//spectrumLine.append(payloadIn.mid(17,475)); // write over the FD, last one doesn't, oh well.
spectrumLine.append(payloadIn.right(payloadIn.length()-17)); // write over the FD, last one doesn't, oh well.
emit haveSpectrumData(spectrumLine, spectrumStartFreq, spectrumEndFreq);
}
} else if ((sequence > 1) && (sequence < rigCaps.spectSeqMax))
{
// spectrum from index 05 to index 54, length is 55 per segment. Length is 56 total. Pixel data is 50 pixels.
// sequence numbers 2 through 10, 50 pixels each. Total after sequence 10 is 450 pixels.
payloadIn.chop(1);
spectrumLine.insert(spectrumLine.length(), payloadIn.right(payloadIn.length() - 5)); // write over the FD, last one doesn't, oh well.
//qInfo(logRig()) << "sequence: " << sequence << "spec index: " << (sequence-2)*55 << " payloadPosition: " << payloadIn.length() - 5 << " payload length: " << payloadIn.length();
} else if (sequence == rigCaps.spectSeqMax)
{
// last spectrum, a little bit different (last 25 pixels). Total at end is 475 pixels (7300).
payloadIn.chop(1);
spectrumLine.insert(spectrumLine.length(), payloadIn.right(payloadIn.length() - 5));
//qInfo(logRig()) << "sequence: " << sequence << " spec index: " << (sequence-2)*55 << " payloadPosition: " << payloadIn.length() - 5 << " payload length: " << payloadIn.length();
emit haveSpectrumData(spectrumLine, spectrumStartFreq, spectrumEndFreq);
}
}
void rigCommander::parseSpectrumRefLevel()
{
// 00: 27
// 01: 19
// 02: 00 (fixed)
// 03: XX
// 04: x0
// 05: 00 (+) or 01 (-)
unsigned char negative = payloadIn[5];
int value = bcdHexToUInt(payloadIn[3], payloadIn[4]);
value = value / 10;
if(negative){
value *= (-1*negative);
}
emit haveSpectrumRefLevel(value);
}
unsigned char rigCommander::bcdHexToUChar(unsigned char in)
{
unsigned char out = 0;
out = in & 0x0f;
out += ((in & 0xf0) >> 4)*10;
return out;
}
unsigned int rigCommander::bcdHexToUInt(unsigned char hundreds, unsigned char tensunits)
{
// convert:
// hex data: 0x41 0x23
// convert to uint:
// uchar: 4123
unsigned char thousands = ((hundreds & 0xf0)>>4);
unsigned int rtnVal;
rtnVal = (hundreds & 0x0f)*100;
rtnVal += ((tensunits & 0xf0)>>4)*10;
rtnVal += (tensunits & 0x0f);
rtnVal += thousands * 1000;
return rtnVal;
}
unsigned char rigCommander::bcdHexToUChar(unsigned char hundreds, unsigned char tensunits)
{
// convert:
// hex data: 0x01 0x23
// convert to uchar:
// uchar: 123
//unsigned char thousands = ((hundreds & 0xf0)>>4);
unsigned char rtnVal;
rtnVal = (hundreds & 0x0f)*100;
rtnVal += ((tensunits & 0xf0)>>4)*10;
rtnVal += (tensunits & 0x0f);
//rtnVal += thousands * 1000;
return rtnVal;
}
QByteArray rigCommander::bcdEncodeInt(unsigned int num)
{
if(num > 9999)
{
qInfo(logRig()) << __FUNCTION__ << "Error, number is too big for four-digit conversion: " << num;
return QByteArray();
}
char thousands = num / 1000;
char hundreds = (num - (1000*thousands)) / 100;
char tens = (num - (1000*thousands) - (100*hundreds)) / 10;
char units = (num - (1000*thousands) - (100*hundreds) - (10*tens));
char b0 = hundreds | (thousands << 4);
char b1 = units | (tens << 4);
//qInfo(logRig()) << __FUNCTION__ << " encoding value " << num << " as hex:";
//printHex(QByteArray(b0), false, true);
//printHex(QByteArray(b1), false, true);
QByteArray result;
result.append(b0).append(b1);
return result;
}
void rigCommander::parseFrequency()
{
freqt freq;
freq.Hz = 0;
freq.MHzDouble = 0;
// process payloadIn, which is stripped.
// float frequencyMhz
// payloadIn[04] = ; // XX MHz
// payloadIn[03] = ; // XX0 KHz
// payloadIn[02] = ; // X.X KHz
// payloadIn[01] = ; // . XX KHz
// printHex(payloadIn, false, true);
frequencyMhz = 0.0;
if(payloadIn.length() == 7)
{
// 7300 has these digits too, as zeros.
// IC-705 or IC-9700 with higher frequency data available.
frequencyMhz += 100*(payloadIn[05] & 0x0f);
frequencyMhz += (1000*((payloadIn[05] & 0xf0) >> 4));
freq.Hz += (payloadIn[05] & 0x0f) * 1E6 * 100;
freq.Hz += ((payloadIn[05] & 0xf0) >> 4) * 1E6 * 1000;
}
freq.Hz += (payloadIn[04] & 0x0f) * 1E6;
freq.Hz += ((payloadIn[04] & 0xf0) >> 4) * 1E6 * 10;
frequencyMhz += payloadIn[04] & 0x0f;
frequencyMhz += 10*((payloadIn[04] & 0xf0) >> 4);
// KHz land:
frequencyMhz += ((payloadIn[03] & 0xf0) >>4)/10.0 ;
frequencyMhz += (payloadIn[03] & 0x0f) / 100.0;
frequencyMhz += ((payloadIn[02] & 0xf0) >> 4) / 1000.0;
frequencyMhz += (payloadIn[02] & 0x0f) / 10000.0;
frequencyMhz += ((payloadIn[01] & 0xf0) >> 4) / 100000.0;
frequencyMhz += (payloadIn[01] & 0x0f) / 1000000.0;
freq.Hz += payloadIn[01] & 0x0f;
freq.Hz += ((payloadIn[01] & 0xf0) >> 4)* 10;
freq.Hz += (payloadIn[02] & 0x0f) * 100;
freq.Hz += ((payloadIn[02] & 0xf0) >> 4) * 1000;
freq.Hz += (payloadIn[03] & 0x0f) * 10000;
freq.Hz += ((payloadIn[03] & 0xf0) >>4) * 100000;
freq.MHzDouble = frequencyMhz;
rigState.vfoAFreq = freq;
emit haveFrequency(freq);
}
freqt rigCommander::parseFrequency(QByteArray data, unsigned char lastPosition)
{
// process payloadIn, which is stripped.
// float frequencyMhz
// payloadIn[04] = ; // XX MHz
// payloadIn[03] = ; // XX0 KHz
// payloadIn[02] = ; // X.X KHz
// payloadIn[01] = ; // . XX KHz
//printHex(data, false, true);
// TODO: Check length of data array prior to reading +/- position
// NOTE: This function was written on the IC-7300, which has no need for 100 MHz and 1 GHz.
// Therefore, this function has to go to position +1 to retrieve those numbers for the IC-9700.
// TODO: 64-bit value is incorrect, multiplying by wrong numbers.
float freq = 0.0;
freqt freqs;
freqs.MHzDouble = 0;
freqs.Hz = 0;
// MHz:
freq += 100*(data[lastPosition+1] & 0x0f);
freq += (1000*((data[lastPosition+1] & 0xf0) >> 4));
freq += data[lastPosition] & 0x0f;
freq += 10*((data[lastPosition] & 0xf0) >> 4);
freqs.Hz += (data[lastPosition] & 0x0f) * 1E6;
freqs.Hz += ((data[lastPosition] & 0xf0) >> 4) * 1E6 * 10; // 10 MHz
if(data.length() >= lastPosition+1)
{
freqs.Hz += (data[lastPosition+1] & 0x0f) * 1E6 * 100; // 100 MHz
freqs.Hz += ((data[lastPosition+1] & 0xf0) >> 4) * 1E6 * 1000; // 1000 MHz
}
// Hz:
freq += ((data[lastPosition-1] & 0xf0) >>4)/10.0 ;
freq += (data[lastPosition-1] & 0x0f) / 100.0;
freq += ((data[lastPosition-2] & 0xf0) >> 4) / 1000.0;
freq += (data[lastPosition-2] & 0x0f) / 10000.0;
freq += ((data[lastPosition-3] & 0xf0) >> 4) / 100000.0;
freq += (data[lastPosition-3] & 0x0f) / 1000000.0;
freqs.Hz += (data[lastPosition-1] & 0x0f) * 10E3; // 10 KHz
freqs.Hz += ((data[lastPosition-1] & 0xf0) >> 4) * 100E3; // 100 KHz
freqs.Hz += (data[lastPosition-2] & 0x0f) * 100; // 100 Hz
freqs.Hz += ((data[lastPosition-2] & 0xf0) >> 4) * 1000; // 1 KHz
freqs.Hz += (data[lastPosition-3] & 0x0f) * 1; // 1 Hz
freqs.Hz += ((data[lastPosition-3] & 0xf0) >> 4) * 10; // 10 Hz
freqs.MHzDouble = (double)(freqs.Hz / 1000000.0);
return freqs;
}
void rigCommander::parseMode()
{
unsigned char filter;
if(payloadIn[2] != '\xFD')
{
filter = payloadIn[2];
} else {
filter = 0;
}
rigState.mode = (unsigned char)payloadIn[01];
rigState.filter = filter;
emit haveMode((unsigned char)payloadIn[01], filter);
}
void rigCommander::startATU()
{
QByteArray payload("\x1C\x01\x02");
prepDataAndSend(payload);
}
void rigCommander::setATU(bool enabled)
{
QByteArray payload;
if(enabled)
{
payload.setRawData("\x1C\x01\x01", 3);
} else {
payload.setRawData("\x1C\x01\x00", 3);
}
prepDataAndSend(payload);
}
void rigCommander::getATUStatus()
{
//qInfo(logRig()) << "Sending out for ATU status in RC.";
QByteArray payload("\x1C\x01");
prepDataAndSend(payload);
}
void rigCommander::getAttenuator()
{
QByteArray payload("\x11");
prepDataAndSend(payload);
}
void rigCommander::getPreamp()
{
QByteArray payload("\x16\x02");
prepDataAndSend(payload);
}
void rigCommander::getAntenna()
{
// This one might neet some thought
// as it seems each antenna has to be checked.
// Maybe 0x12 alone will do it.
QByteArray payload("\x12");
prepDataAndSend(payload);
}
void rigCommander::setAttenuator(unsigned char att)
{
QByteArray payload("\x11");
payload.append(att);
prepDataAndSend(payload);
}
void rigCommander::setPreamp(unsigned char pre)
{
QByteArray payload("\x16\x02");
payload.append(pre);
prepDataAndSend(payload);
}
void rigCommander::setAntenna(unsigned char ant, bool rx)
{
QByteArray payload("\x12");
payload.append(ant);
if (rigCaps.hasRXAntenna) {
payload.append((unsigned char)rx); // 0x00 = use for TX and RX
}
prepDataAndSend(payload);
}
void rigCommander::getRigID()
{
QByteArray payload;
payload.setRawData("\x19\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::setRigID(unsigned char rigID)
{
// This function overrides radio model detection.
// It can be used for radios without Rig ID commands,
// or to force a specific radio model
qInfo(logRig()) << "Sending rig ID to: (int)" << (int)rigID;
lookingForRig = true;
foundRig = false;
// needed because this is a fake message and thus the value is uninitialized
// this->civAddr comes from how rigCommander is setup and should be accurate.
this->incomingCIVAddr = this->civAddr;
this->model = determineRadioModel(rigID);
rigCaps.modelID = rigID;
rigCaps.model = determineRadioModel(rigID);
determineRigCaps();
}
void rigCommander::changeLatency(const quint16 value)
{
emit haveChangeLatency(value);
}
void rigCommander::sayAll()
{
QByteArray payload;
payload.setRawData("\x13\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::sayFrequency()
{
QByteArray payload;
payload.setRawData("\x13\x01", 2);
prepDataAndSend(payload);
}
void rigCommander::sayMode()
{
QByteArray payload;
payload.setRawData("\x13\x02", 2);
prepDataAndSend(payload);
}
// Other:
QByteArray rigCommander::stripData(const QByteArray &data, unsigned char cutPosition)
{
QByteArray rtndata;
if(data.length() < cutPosition)
{
return rtndata;
}
rtndata = data.right(cutPosition);
return rtndata;
}
void rigCommander::sendState()
{
emit stateInfo(&rigState);
}
void rigCommander::getDebug()
{
// generic debug function for development.
emit getMoreDebug();
}
void rigCommander::printHex(const QByteArray &pdata)
{
printHex(pdata, false, true);
}
void rigCommander::printHex(const QByteArray &pdata, bool printVert, bool printHoriz)
{
qDebug(logRig()) << "---- Begin hex dump -----:";
QString sdata("DATA: ");
QString index("INDEX: ");
QStringList strings;
for(int i=0; i < pdata.length(); i++)
{
strings << QString("[%1]: %2").arg(i,8,10,QChar('0')).arg((unsigned char)pdata[i], 2, 16, QChar('0'));
sdata.append(QString("%1 ").arg((unsigned char)pdata[i], 2, 16, QChar('0')) );
index.append(QString("%1 ").arg(i, 2, 10, QChar('0')));
}
if(printVert)
{
for(int i=0; i < strings.length(); i++)
{
//sdata = QString(strings.at(i));
qDebug(logRig()) << strings.at(i);
}
}
if(printHoriz)
{
qDebug(logRig()) << index;
qDebug(logRig()) << sdata;
}
qDebug(logRig()) << "----- End hex dump -----";
}
void rigCommander::dataFromServer(QByteArray data)
{
//qInfo(logRig()) << "emit dataForComm()";
emit dataForComm(data);
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik