Formatting

On but set to none.

cachingqueue.cpp

@@ -120,7 +120,7 @@ void cachingQueue::add(queuePriority prio ,queueItem item)
     if (item.command != funcNone)
     {
         QMutexLocker locker(&mutex);
-        if (!item.recurring || isRecurring(item.command) != prio)
+        if (!item.recurring || isRecurring(item.command,item.vfo) != prio)
         {
             if (item.recurring && prio == queuePriority::priorityImmediate) {
                 qWarning() << "Warning, cannot add recurring command with immediate priority!" << funcString[item.command];

cachingqueue.h

@@ -22,9 +22,7 @@ enum queuePriority {
     priorityNone=0, priorityImmediate=1, priorityHighest=2, priorityHigh=3, priorityMediumHigh=5, priorityMedium=7, priorityMediumLow=11, priorityLow=19, priorityLowest=23
 };
 
-enum queueItemType {
-    queueCommandNone,queueCommandGet, queueCommandSet, queueMessage
-};
+inline QMap<QString,int> priorityMap = {{"None",0},{"Immediate",1},{"Highest",2},{"High",3},{"Medium High",5},{"Medium",7},{"Medium Low",11},{"Low",19},{"Lowest",23}};
 
 // Command with no param is a get by default
 struct queueItem {
@@ -124,7 +122,6 @@ public:
     rigCapabilities* getRigCaps() { return rigCaps; }
 };
 
-Q_DECLARE_METATYPE(queueItemType)
 Q_DECLARE_METATYPE(queueItem)
 Q_DECLARE_METATYPE(cacheItem)
 #endif // CACHINGQUEUE_H

freqctrl.cpp

@@ -536,8 +536,29 @@ void freqCtrl::wheelEvent(QWheelEvent *event)
     QPointF   pt = event->position();
 #endif
     int       delta = m_InvertScrolling ? -event->angleDelta().y() : event->angleDelta().y();
-    int       numDegrees = delta / 8;
-    int       numSteps = numDegrees / 15;
+    qreal       numDegrees = delta / 8;
+    qreal       offset = numDegrees / 15;
+
+
+    qreal stepsToScroll = QApplication::wheelScrollLines() * offset;
+
+    if( (scrollWheelOffsetAccumulated > 0) && (offset > 0) ) {
+        scrollWheelOffsetAccumulated += stepsToScroll;
+    } else if ((scrollWheelOffsetAccumulated < 0) && (offset < 0)) {
+        scrollWheelOffsetAccumulated += stepsToScroll;
+    } else {
+        // Changed direction, zap the old accumulation:
+        scrollWheelOffsetAccumulated = stepsToScroll;
+        //qInfo() << "Scroll changed direction";
+    }
+
+    int numSteps = int(scrollWheelOffsetAccumulated);
+
+    if(!numSteps) {
+        // we have not accumulated enough for a complete step.
+        // come back later.
+        return;
+    }
 
     for (int i = m_DigStart; i < m_NumDigits; i++)
     {
@@ -549,6 +570,7 @@ void freqCtrl::wheelEvent(QWheelEvent *event)
                 decFreq();
         }
     }
+    scrollWheelOffsetAccumulated = 0;
 }
 
 void freqCtrl::keyPressEvent(QKeyEvent *event)

freqctrl.h

@@ -9,6 +9,7 @@
 #include <QFrame>
 #include <QImage>
 #include <QtGui>
+#include <QApplication>
 
 enum FctlUnit {
     FCTL_UNIT_NONE,            // Freq displayed without unit: 14.236.000
@@ -110,6 +111,10 @@ private:
     int         m_DecPos;
     int         m_NumSeps;
 
+    int scrollYperClick = 24;
+    int scrollXperClick = 24;
+    qreal scrollWheelOffsetAccumulated=0;
+
     qint64      m_MinStep;
     qint64      m_freq;
     qint64      m_Oldfreq;

logcategories.cpp

@@ -17,3 +17,4 @@ Q_LOGGING_CATEGORY(logUsbControl, "usbcontrol")
 Q_LOGGING_CATEGORY(logAudioConverter, "audioconverter")
 Q_LOGGING_CATEGORY(logCluster, "cluster")
 Q_LOGGING_CATEGORY(logTCIServer, "tci.server")
+Q_LOGGING_CATEGORY(logRptr, "repeater")

logcategories.h

@@ -20,6 +20,7 @@ Q_DECLARE_LOGGING_CATEGORY(logUsbControl)
 Q_DECLARE_LOGGING_CATEGORY(logAudioConverter)
 Q_DECLARE_LOGGING_CATEGORY(logCluster)
 Q_DECLARE_LOGGING_CATEGORY(logTCIServer)
+Q_DECLARE_LOGGING_CATEGORY(logRptr)
 
 
 #if defined(Q_OS_WIN) && !defined(__PRETTY_FUNCTION__)

meter.cpp

@@ -63,9 +63,9 @@ meter::meter(QWidget *parent) : QWidget(parent)
     connect(combo, SIGNAL(activated(int)), this, SLOT(acceptComboItem(int)));
     //connect(combo, SIGNAL(currentIndexChanged(int)), this, SLOT(acceptComboItem(int)));
 
+    this->setToolTip("");
     combo->hide();
     this->installEventFilter(this);
-
 }
 
 void meter::setCompReverse(bool reverse) {
@@ -125,12 +125,23 @@ void meter::clearMeter()
     update();
 }
 
-void meter::setMeterType(meter_t type)
+void meter::setMeterType(meter_t m_type_req)
 {
-    if(type == meterType)
+    if(m_type_req == meterType)
         return;
 
-    meterType = type;
+    if( (m_type_req == meterS) || (m_type_req == meterPower) ) {
+        this->setToolTip("");
+    } else {
+        this->setToolTip("Double-click to select meter type.");
+    }
+
+    int m_index = combo->findData(m_type_req);
+    combo->blockSignals(true);
+    combo->setCurrentIndex(m_index);
+    combo->blockSignals(false);
+
+    meterType = m_type_req;
     // clear average and peak vectors:
     this->clearMeter();
 }
@@ -179,13 +190,26 @@ void meter::handleDoubleClick() {
 }
 
 bool meter::eventFilter(QObject *object, QEvent *event) {
+
+    if( (freezeDrawing) && (event->type() == QEvent::MouseButtonPress) ) {
+        combo->hide();
+        freezeDrawing = false;
+        return true;
+    }
+
+    if( (freezeDrawing) && (event->type() == QEvent::MouseButtonDblClick) ) {
+        combo->hide();
+        freezeDrawing = false;
+        return true;
+    }
+
     if(event->type() == QEvent::MouseButtonDblClick) {
-        qDebug() << "Mouse double click event in meter widget";
         if( !(meterType == meterS || meterType == meterPower)) {
             handleDoubleClick();
         }
         return true;
     }
+
     (void)object;
     return false;
 }
@@ -253,6 +277,8 @@ void meter::paintEvent(QPaintEvent *)
             }
             break;
         case meterNone:
+            label = "Double-click to set meter";
+            drawLabel(&painter);
             return;
             break;
         case meterAudio:

repeatersetup.cpp

@@ -378,6 +378,10 @@ void repeaterSetup::handleDTCS(quint16 dcode, bool tinv, bool rinv)
 
 void repeaterSetup::handleUpdateCurrentMainFrequency(freqt mainfreq)
 {
+    if(mainfreq.VFO == inactiveVFO)
+        return;
+
+    haveReceivedFrequency = true;
     if(amTransmitting)
         return;
 
@@ -684,6 +688,10 @@ void repeaterSetup::on_splitPlusButton_clicked()
     quint64 txfreqhz;
     freqt f;
     QString txString;
+    if(!haveReceivedFrequency) {
+        qWarning(logRptr()) << "Cannot compute offset without first receiving a frequency.";
+        return;
+    }
     if(hzOffset)
     {
         txfreqhz = currentMainFrequency.Hz + hzOffset;
@@ -693,8 +701,16 @@ void repeaterSetup::on_splitPlusButton_clicked()
         txString = QString::number(f.Hz / double(1E6), 'f', 6);
         ui->splitTransmitFreqEdit->setText(txString);
         usedPlusSplit = true;
+
+    } else {
+        qWarning(logRptr()) << "Cannot set split using supplied offset value.";
+        return;
+    }
+    if(ui->splitEnableChk->isChecked() || ui->quickSplitChk->isChecked()) {
         emit setTransmitFrequency(f);
         emit setTransmitMode(modeTransmitVFO);
+    } else {
+        qWarning(logRptr()) << "Not setting transmit frequency until split mode is enabled.";
     }
 }
 
@@ -704,6 +720,10 @@ void repeaterSetup::on_splitMinusBtn_clicked()
     quint64 txfreqhz;
     freqt f;
     QString txString;
+    if(!haveReceivedFrequency) {
+        qWarning(logRptr()) << "Cannot compute offset without first receiving a frequency.";
+        return;
+    }
     if(hzOffset)
     {
         txfreqhz = currentMainFrequency.Hz - hzOffset;
@@ -713,13 +733,26 @@ void repeaterSetup::on_splitMinusBtn_clicked()
         txString = QString::number(f.Hz / double(1E6), 'f', 6);
         ui->splitTransmitFreqEdit->setText(txString);
         usedPlusSplit = false;
+    } else {
+        qWarning(logRptr()) << "Cannot set split using supplied offset value.";
+        return;
+    }
+
+    if(ui->splitEnableChk->isChecked() || ui->quickSplitChk->isChecked()) {
         emit setTransmitFrequency(f);
         emit setTransmitMode(modeTransmitVFO);
+    } else {
+        qWarning(logRptr()) << "Not setting transmit frequency until split mode is enabled.";
+        return;
     }
 }
 
 void repeaterSetup::on_splitTxFreqSetBtn_clicked()
 {
+    if(!haveReceivedFrequency) {
+        qWarning(logRptr()) << "Cannot compute offset without first receiving a frequency.";
+        return;
+    }
     quint64 fHz = getFreqHzFromMHzString(ui->splitTransmitFreqEdit->text());
     freqt f;
     if(fHz)

repeatersetup.h

@@ -6,6 +6,7 @@
 
 #include "repeaterattributes.h"
 #include "rigidentities.h"
+#include "logcategories.h"
 
 namespace Ui {
 class repeaterSetup;
@@ -103,6 +104,7 @@ private:
 
     rigCapabilities rig;
     bool haveRig = false;
+    bool haveReceivedFrequency = false;
     duplexMode_t currentdm;
     modeInfo currentModeMain;
     modeInfo modeTransmitVFO;

resources/install.sh

@@ -1,10 +1,11 @@
 #!/bin/bash
 echo "This script copies the following items into your system:" 
 echo ""
-echo "icon: wfview.png to /usr/share/pixmaps/"
+echo "icon: unix_icons/wfview.png to /usr/share/icons/hicolor/256x256/apps/"
 echo "wfview application to /usr/local/bin/"
 echo "wfview.desktop to /usr/share/applications/"
-echo "qdarkstyle stylesheet to /usr/share/wfview/stylesheets"
+echo "org.wfview.wfview.metainfo.xml metadata file to /usr/share/metainfo/"
+echo "qdarkstyle stylesheet to /usr/share/wfview/stylesheets/"
 
 echo ""
 echo "This script MUST be run from the build directory. Do not run it from the source directory!"
@@ -30,7 +31,8 @@ echo ""
 
 cp wfview /usr/local/bin/wfview
 cp wfview.desktop /usr/share/applications/
-cp wfview.png /usr/share/pixmaps/
+cp unix_icons/wfview.png /usr/share/icons/hicolor/256x256/apps/
+cp org.wfview.wfview.metainfo.xml /usr/share/metainfo/
 mkdir -p /usr/share/wfview/stylesheets
 cp -r qdarkstyle /usr/share/wfview/stylesheets/
 cp -r rigs /usr/share/wfview/

resources/org.wfview.wfview.metainfo.xml

@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<component type="desktop-application">
+  <id>org.wfview.wfview</id>
+  <launchable type="desktop-id">wfview.desktop</launchable>
+  <metadata_license>CC0-1.0</metadata_license>
+  <project_license>GPL-3.0-or-later</project_license>
+  <name>wfview</name>
+  <developer_name>Elliott H. Liggett</developer_name>
+  <summary>Open Source interface for Icom transceivers</summary>
+  <description>
+    <p>
+      wfview is a program developed by amateur radio enthusiasts to control modern Icom ham radios. It provides the user with controls
+      that may be comfortably operated from a keyboard, mouse, or touch screen interface. wfview is free and open source software.
+    </p>
+    <p>
+      wfview has been developed with an eye towards compatibility. Even though our target platform consists of modern-era transceivers,
+      wfview’s command dictionary is focused on commands with the most compatibility. Many of Icom’s transceivers from the last 20 years
+      will work to some degree with wfview, and we are always adding more.
+    </p>
+  </description>
+  <screenshots>
+    <screenshot type="default">
+      <image type="source">https://wfview.org/wp-content/uploads/2021/11/7300-remote-screenshot.png</image>
+    </screenshot>
+  </screenshots>
+  <url type="homepage">https://wfview.org</url>
+  <url type="bugtracker">https://gitlab.com/eliggett/wfview/-/issues</url>
+  <content_rating type="oars-1.1"/>
+</component>

rigcommander.cpp

@@ -1259,6 +1259,7 @@ void rigCommander::determineRigCaps()
     rigCaps.steps.clear();
     rigCaps.memParser.clear();
     rigCaps.satParser.clear();
+    rigCaps.periodic.clear();
     // modelID should already be set!
     while (!rigList.contains(rigCaps.modelID))
     {
@@ -1272,6 +1273,9 @@ void rigCommander::determineRigCaps()
     }
     rigCaps.filename = rigList.find(rigCaps.modelID).value();
     QSettings* settings = new QSettings(rigCaps.filename, QSettings::Format::IniFormat);
+#if (QT_VERSION < QT_VERSION_CHECK(6,0,0))
+    settings->setIniCodec("UTF-8");
+#endif
     if (!settings->childGroups().contains("Rig"))
     {
         qWarning(logRig()) << rigCaps.filename << "Cannot be loaded!";
@@ -1341,6 +1345,26 @@ void rigCommander::determineRigCaps()
         settings->endArray();
     }
 
+    int numPeriodic = settings->beginReadArray("Periodic");
+    if (numPeriodic == 0){
+        qWarning(logRig())<< "No periodic commands defined, please check rigcaps file";
+        settings->endArray();
+    } else {
+        for (int c=0; c < numPeriodic; c++)
+        {
+            settings->setArrayIndex(c);
+            funcs func = funcsLookup.find(settings->value("Command", "").toString().toUpper()).value();
+            if (!rigCaps.commands.contains(func)) {
+                qWarning(logRig()) << "Cannot find periodic command" << settings->value("Command", "").toString() << "in rigcaps, ignoring";
+            } else {
+                rigCaps.periodic.append(periodicType(func,
+                     settings->value("Priority","").toString(),priorityMap[settings->value("Priority","").toString()],
+                     settings->value("VFO",-1).toInt()));
+            }
+        }
+        settings->endArray();
+    }
+
     int numModes = settings->beginReadArray("Modes");
     if (numModes == 0) {
         settings->endArray();

rigcreator.cpp

@@ -16,8 +16,24 @@ rigCreator::rigCreator(QWidget *parent) :
     this->setWindowFlags(flags);
 
     qInfo() << "Creating instance of rigCreator()";
-    commandsList = new tableCombobox(createModel(commandsModel, funcString),true,ui->commands);
+    commandsList = new tableCombobox(createModel(NUMFUNCS, commandsModel, funcString),true,ui->commands);
     ui->commands->setItemDelegateForColumn(0, commandsList);
+
+    priorityModel = new QStandardItemModel();
+
+    foreach (auto key, priorityMap.keys())
+    {
+        QStandardItem *itemName = new QStandardItem(key);
+        QStandardItem *itemId = new QStandardItem(priorityMap.value(key));
+
+        QList<QStandardItem*> row;
+        row << itemName << itemId;
+        priorityModel->appendRow(row);
+    }
+
+    priorityList = new tableCombobox(priorityModel,true,ui->periodicCommands);
+    ui->periodicCommands->setItemDelegateForColumn(0, priorityList);
+    ui->periodicCommands->setItemDelegateForColumn(1, commandsList);
     /*
     ui->commands->setColumnWidth(0,120);
     ui->commands->setColumnWidth(1,100);
@@ -103,6 +119,10 @@ void rigCreator::loadRigFile(QString file)
     this->currentFile = file;
     QSettings* settings = new QSettings(file, QSettings::Format::IniFormat);
 
+#if (QT_VERSION < QT_VERSION_CHECK(6,0,0))
+    settings->setIniCodec("UTF-8");
+#endif
+
     if (!settings->childGroups().contains("Rig"))
     {
         QFileInfo info(file);
@@ -177,6 +197,34 @@ void rigCreator::loadRigFile(QString file)
         settings->endArray();
     }
 
+    ui->periodicCommands->clearContents();
+    ui->periodicCommands->model()->removeRows(0,ui->periodicCommands->rowCount());
+    int numPeriodic = settings->beginReadArray("Periodic");
+    if (numPeriodic == 0) {
+        settings->endArray();
+
+        int c=0;
+        foreach (auto p, defaultPeriodic)
+        {
+            ui->periodicCommands->insertRow(ui->periodicCommands->rowCount());
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,0),p.priority);
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,1),funcString[p.func]);
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,2),QString::number(p.vfo));
+            c++;
+        }
+    }
+    else {
+        for (int c = 0; c < numPeriodic; c++)
+        {
+            settings->setArrayIndex(c);
+            ui->periodicCommands->insertRow(ui->periodicCommands->rowCount());
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,0),settings->value("Priority", "").toString());
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,1),settings->value("Command", "").toString());
+            ui->periodicCommands->model()->setData(ui->periodicCommands->model()->index(c,2),QString::number(settings->value("VFO", 0).toInt()));
+        }
+        settings->endArray();
+    }
+
     ui->spans->clearContents();
     ui->spans->model()->removeRows(0,ui->spans->rowCount());
     int numSpans = settings->beginReadArray("Spans");
@@ -372,6 +420,7 @@ void rigCreator::loadRigFile(QString file)
     connect(ui->memoryFormat,SIGNAL(editingFinished()),SLOT(changed()));
     connect(ui->satMemories,SIGNAL(editingFinished()),SLOT(changed()));
     connect(ui->satelliteFormat,SIGNAL(editingFinished()),SLOT(changed()));
+    connect(ui->periodicCommands,SIGNAL(editingFinished()),SLOT(changed()));
 
     settingsChanged = false;
 }
@@ -463,6 +512,18 @@ void rigCreator::saveRigFile(QString file)
     }
     settings->endArray();
 
+    ui->periodicCommands->sortByColumn(1,Qt::AscendingOrder);
+    settings->beginWriteArray("Periodic");
+    for (int n = 0; n<ui->periodicCommands->rowCount();n++)
+    {
+        settings->setArrayIndex(n);
+        settings->setValue("Priority", (ui->periodicCommands->item(n,0) == NULL) ? "" : ui->periodicCommands->item(n,0)->text());
+        settings->setValue("Command", (ui->periodicCommands->item(n,1) == NULL) ? "" : ui->periodicCommands->item(n,1)->text());
+        settings->setValue("VFO", (ui->periodicCommands->item(n,2) == NULL) ? -1 : ui->periodicCommands->item(n,2)->text().toInt());
+    }
+    settings->endArray();
+
+
     //settings->remove("Spans");
     ui->spans->sortByColumn(0,Qt::AscendingOrder);
     settings->beginWriteArray("Spans");
@@ -587,12 +648,12 @@ void rigCreator::saveRigFile(QString file)
 
 // Create model for comboBox, takes un-initialized model object and populates it.
 // This will be deleted by the comboBox on destruction.
-QStandardItemModel* rigCreator::createModel(QStandardItemModel* model, QString strings[])
+QStandardItemModel* rigCreator::createModel(int num,QStandardItemModel* model, QString strings[])
 {
 
     model = new QStandardItemModel();
 
-    for (int i=0; i < NUMFUNCS;i++)
+    for (int i=0; i < num;i++)
     {
         if (!strings[i].startsWith('-')) {
             QStandardItem *itemName = new QStandardItem(strings[i]);
@@ -608,6 +669,24 @@ QStandardItemModel* rigCreator::createModel(QStandardItemModel* model, QString s
     return model;
 }
 
+QStandardItemModel* rigCreator::createModel(QStandardItemModel* model, QStringList strings)
+{
+    model = new QStandardItemModel();
+
+    for (int i=0; i < strings.size();i++)
+    {
+        QStandardItem *itemName = new QStandardItem(strings[i]);
+        QStandardItem *itemId = new QStandardItem(i);
+
+        QList<QStandardItem*> row;
+        row << itemName << itemId;
+
+        model->appendRow(row);
+    }
+
+    return model;
+}
+
 void rigCreator::on_hasCommand29_toggled(bool checked)
 {
     ui->commands->setColumnHidden(4,!checked);

rigcreator.h

@@ -13,6 +13,43 @@
 #include "wfviewtypes.h"
 #include "rigidentities.h"
 #include "tablewidget.h"
+#include "cachingqueue.h"
+
+
+inline QList<periodicType> defaultPeriodic = {
+    {funcSelectedFreq,"Medium",0},
+    {funcSelectedMode,"Medium",0},
+    {funcUnselectedFreq,"Medium",1},
+    {funcUnselectedMode,"Medium",1},
+    {funcOverflowStatus,"Medium",0},
+    {funcScopeMainMode,"Medium High",0},
+    {funcScopeSubMode,"Medium High",1},
+    {funcScopeMainSpan,"Medium High",0},
+    {funcScopeSubSpan,"Medium High",1},
+    {funcScopeSingleDual,"Medium High",0},
+    {funcScopeMainSub,"Medium High",0},
+    {funcScopeMainSpeed,"Medium",0},
+    {funcScopeSubSpeed,"Medium",1},
+    {funcScopeMainHold,"Medium",0},
+    {funcScopeSubHold,"Medium",1},
+    {funcVFODualWatch,"Medium",0},
+    {funcTransceiverStatus,"High",0},
+    {funcDATAOffMod,"Medium High",0},
+    {funcDATA1Mod,"Medium High",0},
+    {funcDATA2Mod,"Medium High",0},
+    {funcDATA3Mod,"Medium High",0},
+    {funcRFPower,"Medium",0},
+    {funcMonitorGain,"Medium Low",0},
+    {funcMonitor,"Medium Low",0},
+    {funcRfGain,"Medium",0},
+    {funcTunerStatus,"Medium",0},
+    {funcTuningStep,"Medium Low",-1},
+    {funcAttenuator,"Medium Low",-1},
+    {funcPreamp,"Medium Low",-1},
+    {funcAntenna,"Medium Low",-1},
+    {funcToneSquelchType,"Medium Low",-1},
+    {funcSMeter,"Highest",-1}
+};
 
 namespace Ui {
 class rigCreator;
@@ -42,9 +79,13 @@ private:
     void closeEvent(QCloseEvent *event);
     QMenu* context;
     tableCombobox* commandsList;
+    tableCombobox* priorityList;
     QStandardItemModel* commandsModel;
     QStandardItemModel* command36Model;
-    QStandardItemModel* createModel(QStandardItemModel* model, QString strings[]);
+    QStandardItemModel* priorityModel;
+    QStandardItemModel* createModel(int num, QStandardItemModel* model, QString strings[]);
+    QStandardItemModel* createModel(QStandardItemModel* model, QStringList strings);
+
     QString currentFile;
     bool settingsChanged=false;
 

rigidentities.h

@@ -272,6 +272,7 @@ struct rigCapabilities {
     quint16 satMemories;
     QString satFormat;
     QVector<memParserFormat> satParser;
+    QVector<periodicType> periodic;
 };
 
 Q_DECLARE_METATYPE(rigCapabilities)

rigs/DEFAULT-ICOM.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=DEFAULT
 CIVAddress=0
 RigCtlDModel=0
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -68,6 +69,13 @@ Commands\9\Min=0
 Commands\9\Max=0
 Commands\9\Command29=false
 Commands\size=9
+Periodic\1\Priority=Medium
+Periodic\1\Command=Freq Get
+Periodic\1\VFO=0
+Periodic\2\Priority=Medium
+Periodic\2\Command=Mode Get
+Periodic\2\VFO=0
+Periodic\size=2
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-705.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-705
 CIVAddress=164
 RigCtlDModel=3085
+NumberOfVFOs=1
 SpectrumSeqMax=11
 SpectrumAmpMax=160
 SpectrumLenMax=475
@@ -618,6 +619,73 @@ Commands\119\Min=0
 Commands\119\Max=0
 Commands\119\Command29=false
 Commands\size=119
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium High
+Periodic\3\Command=Data Off Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium High
+Periodic\4\Command=DATA1 Mod Input
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Monitor Gain
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium Low
+Periodic\6\Command=Monitor Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium
+Periodic\7\Command=Overflow Status
+Periodic\7\VFO=0
+Periodic\8\Priority=Medium Low
+Periodic\8\Command=Preamp Status
+Periodic\8\VFO=-1
+Periodic\9\Priority=Medium
+Periodic\9\Command=RF Gain
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium
+Periodic\10\Command=RF Power
+Periodic\10\VFO=0
+Periodic\11\Priority=Highest
+Periodic\11\Command=S Meter
+Periodic\11\VFO=-1
+Periodic\12\Priority=Medium
+Periodic\12\Command=Scope Main Hold
+Periodic\12\VFO=0
+Periodic\13\Priority=Medium High
+Periodic\13\Command=Scope Main Mode
+Periodic\13\VFO=0
+Periodic\14\Priority=Medium High
+Periodic\14\Command=Scope Main Span
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium
+Periodic\15\Command=Scope Main Speed
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium
+Periodic\16\Command=Selected Freq
+Periodic\16\VFO=0
+Periodic\17\Priority=Medium
+Periodic\17\Command=Selected Mode
+Periodic\17\VFO=0
+Periodic\18\Priority=Medium Low
+Periodic\18\Command=Tone Squelch Type
+Periodic\18\VFO=-1
+Periodic\19\Priority=High
+Periodic\19\Command=Transceiver Status
+Periodic\19\VFO=0
+Periodic\20\Priority=Medium Low
+Periodic\20\Command=Tuning Step
+Periodic\20\VFO=-1
+Periodic\21\Priority=Medium
+Periodic\21\Command=Unselected Freq
+Periodic\21\VFO=1
+Periodic\22\Priority=Medium
+Periodic\22\Command=Unselected Mode
+Periodic\22\VFO=1
+Periodic\size=22
 Spans\1\Num=0
 Spans\1\Name=±2.5 KHz
 Spans\1\Freq=2500

rigs/IC-706.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-706 (Mk1/Mk2)
 CIVAddress=72
 RigCtlDModel=3009
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -123,6 +124,19 @@ Commands\20\Min=0
 Commands\20\Max=0
 Commands\20\Command29=false
 Commands\size=20
+Periodic\1\Priority=Medium
+Periodic\1\Command=Freq Set
+Periodic\1\VFO=0
+Periodic\2\Priority=Medium
+Periodic\2\Command=Mode Get
+Periodic\2\VFO=0
+Periodic\3\Priority=High
+Periodic\3\Command=Transceiver Status
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Tuning Step
+Periodic\4\VFO=-1
+Periodic\size=4
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-706MK2G.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-706 (MkIIG)
 CIVAddress=88
 RigCtlDModel=3010
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -183,6 +184,28 @@ Commands\32\Min=0
 Commands\32\Max=0
 Commands\32\Command29=false
 Commands\size=32
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium
+Periodic\2\Command=Freq Get
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium
+Periodic\3\Command=Mode Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Preamp Status
+Periodic\4\VFO=-1
+Periodic\5\Priority=Highest
+Periodic\5\Command=S Meter
+Periodic\5\VFO=-1
+Periodic\6\Priority=High
+Periodic\6\Command=Transceiver Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Tuning Step
+Periodic\7\VFO=-1
+Periodic\size=7
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-7100.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-7100
 CIVAddress=136
 RigCtlDModel=3070
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -90,279 +91,317 @@ Commands\13\Command29=false
 Commands\14\Type=Tuning Step
 Commands\14\String=\\x10
 Commands\14\Min=0
-Commands\14\Max=0
+Commands\14\Max=12
 Commands\14\Command29=false
-Commands\15\Type=Tuning Step
-Commands\15\String=\\x10
+Commands\15\Type=Attenuator Status
+Commands\15\String=\\x11
 Commands\15\Min=0
-Commands\15\Max=12
+Commands\15\Max=20
 Commands\15\Command29=false
-Commands\16\Type=Attenuator Status
-Commands\16\String=\\x11
+Commands\16\Type=Speech
+Commands\16\String=\\x13
 Commands\16\Min=0
-Commands\16\Max=20
+Commands\16\Max=2
 Commands\16\Command29=false
-Commands\17\Type=Speech
-Commands\17\String=\\x13
+Commands\17\Type=AF Gain
+Commands\17\String=\\x14\\x01
 Commands\17\Min=0
-Commands\17\Max=2
+Commands\17\Max=255
 Commands\17\Command29=false
-Commands\18\Type=AF Gain
-Commands\18\String=\\x14\\x01
+Commands\18\Type=RF Gain
+Commands\18\String=\\x14\\x02
 Commands\18\Min=0
 Commands\18\Max=255
 Commands\18\Command29=false
-Commands\19\Type=RF Gain
-Commands\19\String=\\x14\\x02
+Commands\19\Type=Squelch
+Commands\19\String=\\x14\\x03
 Commands\19\Min=0
 Commands\19\Max=255
 Commands\19\Command29=false
-Commands\20\Type=Squelch
-Commands\20\String=\\x14\\x03
+Commands\20\Type=NR Level
+Commands\20\String=\\x14\\x06
 Commands\20\Min=0
 Commands\20\Max=255
 Commands\20\Command29=false
-Commands\21\Type=NR Level
-Commands\21\String=\\x14\\x06
+Commands\21\Type=PBT Inner
+Commands\21\String=\\x14\\x07
 Commands\21\Min=0
 Commands\21\Max=255
 Commands\21\Command29=false
-Commands\22\Type=PBT Inner
-Commands\22\String=\\x14\\x07
+Commands\22\Type=PBT Outer
+Commands\22\String=\\x14\\x08
 Commands\22\Min=0
 Commands\22\Max=255
 Commands\22\Command29=false
-Commands\23\Type=PBT Outer
-Commands\23\String=\\x14\\x08
-Commands\23\Min=0
-Commands\23\Max=255
+Commands\23\Type=CW Pitch
+Commands\23\String=\\x14\\x09
+Commands\23\Min=300
+Commands\23\Max=900
 Commands\23\Command29=false
-Commands\24\Type=CW Pitch
-Commands\24\String=\\x14\\x09
-Commands\24\Min=300
-Commands\24\Max=900
+Commands\24\Type=RF Power
+Commands\24\String=\\x14\\x0a
+Commands\24\Min=0
+Commands\24\Max=255
 Commands\24\Command29=false
-Commands\25\Type=RF Power
-Commands\25\String=\\x14\\x0a
+Commands\25\Type=Mic Gain
+Commands\25\String=\\x14\\x0b
 Commands\25\Min=0
 Commands\25\Max=255
 Commands\25\Command29=false
-Commands\26\Type=Mic Gain
-Commands\26\String=\\x14\\x0b
-Commands\26\Min=0
-Commands\26\Max=255
+Commands\26\Type=Key Speed
+Commands\26\String=\\x14\\x0c
+Commands\26\Min=6
+Commands\26\Max=48
 Commands\26\Command29=false
-Commands\27\Type=Key Speed
-Commands\27\String=\\x14\\x0c
-Commands\27\Min=6
-Commands\27\Max=48
+Commands\27\Type=Compressor Level
+Commands\27\String=\\x14\\x0e
+Commands\27\Min=0
+Commands\27\Max=255
 Commands\27\Command29=false
-Commands\28\Type=Compressor Level
-Commands\28\String=\\x14\\x0e
+Commands\28\Type=Break-In Delay
+Commands\28\String=\\x14\\x0f
 Commands\28\Min=0
 Commands\28\Max=255
 Commands\28\Command29=false
-Commands\29\Type=Break-In Delay
-Commands\29\String=\\x14\\x0f
+Commands\29\Type=NB Level
+Commands\29\String=\\x14\\x12
 Commands\29\Min=0
 Commands\29\Max=255
 Commands\29\Command29=false
-Commands\30\Type=NB Level
-Commands\30\String=\\x14\\x12
+Commands\30\Type=Monitor Gain
+Commands\30\String=\\x14\\x15
 Commands\30\Min=0
 Commands\30\Max=255
 Commands\30\Command29=false
-Commands\31\Type=Monitor Gain
-Commands\31\String=\\x14\\x15
+Commands\31\Type=Vox Gain
+Commands\31\String=\\x14\\x16
 Commands\31\Min=0
 Commands\31\Max=255
 Commands\31\Command29=false
-Commands\32\Type=Vox Gain
-Commands\32\String=\\x14\\x16
+Commands\32\Type=Anti-Vox Gain
+Commands\32\String=\\x14\\x17
 Commands\32\Min=0
 Commands\32\Max=255
 Commands\32\Command29=false
-Commands\33\Type=Anti-Vox Gain
-Commands\33\String=\\x14\\x17
+Commands\33\Type=S Meter
+Commands\33\String=\\x15\\x02
 Commands\33\Min=0
 Commands\33\Max=255
 Commands\33\Command29=false
-Commands\34\Type=S Meter
-Commands\34\String=\\x15\\x02
+Commands\34\Type=Power Meter
+Commands\34\String=\\x15\\x11
 Commands\34\Min=0
 Commands\34\Max=255
 Commands\34\Command29=false
-Commands\35\Type=Power Meter
-Commands\35\String=\\x15\\x11
+Commands\35\Type=SWR Meter
+Commands\35\String=\\x15\\x12
 Commands\35\Min=0
 Commands\35\Max=255
 Commands\35\Command29=false
-Commands\36\Type=SWR Meter
-Commands\36\String=\\x15\\x12
+Commands\36\Type=ALC Meter
+Commands\36\String=\\x15\\x13
 Commands\36\Min=0
 Commands\36\Max=255
 Commands\36\Command29=false
-Commands\37\Type=ALC Meter
-Commands\37\String=\\x15\\x13
+Commands\37\Type=Comp Meter
+Commands\37\String=\\x15\\x14
 Commands\37\Min=0
 Commands\37\Max=255
 Commands\37\Command29=false
-Commands\38\Type=Comp Meter
-Commands\38\String=\\x15\\x14
+Commands\38\Type=Vd Meter
+Commands\38\String=\\x15\\x15
 Commands\38\Min=0
 Commands\38\Max=255
 Commands\38\Command29=false
-Commands\39\Type=Vd Meter
-Commands\39\String=\\x15\\x15
+Commands\39\Type=Id Meter
+Commands\39\String=\\x15\\x16
 Commands\39\Min=0
 Commands\39\Max=255
 Commands\39\Command29=false
-Commands\40\Type=Id Meter
-Commands\40\String=\\x15\\x16
+Commands\40\Type=Preamp Status
+Commands\40\String=\\x16\\x02
 Commands\40\Min=0
-Commands\40\Max=255
+Commands\40\Max=2
 Commands\40\Command29=false
-Commands\41\Type=Preamp Status
-Commands\41\String=\\x16\\x02
-Commands\41\Min=0
-Commands\41\Max=2
+Commands\41\Type=AGC Time Constant
+Commands\41\String=\\x16\\x12
+Commands\41\Min=1
+Commands\41\Max=3
 Commands\41\Command29=false
-Commands\42\Type=AGC Time Constant
-Commands\42\String=\\x16\\x12
-Commands\42\Min=1
-Commands\42\Max=3
+Commands\42\Type=Noise Blanker
+Commands\42\String=\\x16\\x22
+Commands\42\Min=0
+Commands\42\Max=1
 Commands\42\Command29=false
-Commands\43\Type=Noise Blanker
-Commands\43\String=\\x16\\x22
+Commands\43\Type=Noise Reduction
+Commands\43\String=\\x16\\x40
 Commands\43\Min=0
 Commands\43\Max=1
 Commands\43\Command29=false
-Commands\44\Type=Noise Reduction
-Commands\44\String=\\x16\\x40
+Commands\44\Type=Auto Notch
+Commands\44\String=\\x16\\x41
 Commands\44\Min=0
 Commands\44\Max=1
 Commands\44\Command29=false
-Commands\45\Type=Auto Notch
-Commands\45\String=\\x16\\x41
+Commands\45\Type=Repeater Tone
+Commands\45\String=\\x16\\x42
 Commands\45\Min=0
 Commands\45\Max=1
 Commands\45\Command29=false
-Commands\46\Type=Repeater Tone
-Commands\46\String=\\x16\\x42
+Commands\46\Type=S Meter Sql Status
+Commands\46\String=\\x16\\x43
 Commands\46\Min=0
 Commands\46\Max=1
 Commands\46\Command29=false
-Commands\47\Type=S Meter Sql Status
-Commands\47\String=\\x16\\x43
+Commands\47\Type=Compressor Status
+Commands\47\String=\\x16\\x44
 Commands\47\Min=0
 Commands\47\Max=1
 Commands\47\Command29=false
-Commands\48\Type=Compressor Status
-Commands\48\String=\\x16\\x44
+Commands\48\Type=Monitor Status
+Commands\48\String=\\x16\\x45
 Commands\48\Min=0
 Commands\48\Max=1
 Commands\48\Command29=false
-Commands\49\Type=Monitor Status
-Commands\49\String=\\x16\\x45
+Commands\49\Type=Vox Status
+Commands\49\String=\\x16\\x46
 Commands\49\Min=0
 Commands\49\Max=1
 Commands\49\Command29=false
-Commands\50\Type=Vox Status
-Commands\50\String=\\x16\\x46
+Commands\50\Type=Break-In Status
+Commands\50\String=\\x16\\x47
 Commands\50\Min=0
 Commands\50\Max=1
 Commands\50\Command29=false
-Commands\51\Type=Break-In Status
-Commands\51\String=\\x16\\x47
+Commands\51\Type=Dial Lock Status
+Commands\51\String=\\x16\\x50
 Commands\51\Min=0
 Commands\51\Max=1
 Commands\51\Command29=false
-Commands\52\Type=Dial Lock Status
-Commands\52\String=\\x16\\x50
+Commands\52\Type=DIGI-Sel Status
+Commands\52\String=\\x16\\x56
 Commands\52\Min=0
 Commands\52\Max=1
 Commands\52\Command29=false
-Commands\53\Type=DIGI-Sel Status
-Commands\53\String=\\x16\\x56
+Commands\53\Type=Power Control
+Commands\53\String=\\x18
 Commands\53\Min=0
 Commands\53\Max=1
 Commands\53\Command29=false
-Commands\54\Type=Power Control
-Commands\54\String=\\x18
+Commands\54\Type=Transceiver ID
+Commands\54\String=\\x19
 Commands\54\Min=0
-Commands\54\Max=1
+Commands\54\Max=0
 Commands\54\Command29=false
-Commands\55\Type=Transceiver ID
-Commands\55\String=\\x19
-Commands\55\Min=0
-Commands\55\Max=0
+Commands\55\Type=Memory Contents
+Commands\55\String=\\x1a\\x00
+Commands\55\Min=1
+Commands\55\Max=109
 Commands\55\Command29=false
-Commands\56\Type=Memory Contents
-Commands\56\String=\\x1a\\x00
-Commands\56\Min=1
-Commands\56\Max=109
+Commands\56\Type=Band Stacking Reg
+Commands\56\String=\\x1a\\x01
+Commands\56\Min=0
+Commands\56\Max=13
 Commands\56\Command29=false
-Commands\57\Type=Band Stacking Reg
-Commands\57\String=\\x1a\\x01
+Commands\57\Type=Quick Split
+Commands\57\String=\\x1a\\x05\\x00\\x15
 Commands\57\Min=0
-Commands\57\Max=13
+Commands\57\Max=1
 Commands\57\Command29=false
-Commands\58\Type=Quick Split
-Commands\58\String=\\x1a\\x05\\x00\\x15
+Commands\58\Type=Tuner/ATU Status
+Commands\58\String=\\x1a\\x05\\x00\\x21
 Commands\58\Min=0
 Commands\58\Max=1
 Commands\58\Command29=false
-Commands\59\Type=Tuner/ATU Status
-Commands\59\String=\\x1a\\x05\\x00\\x21
+Commands\59\Type=CIV Transceive
+Commands\59\String=\\x1a\\x05\\x00\\x95
 Commands\59\Min=0
 Commands\59\Max=1
 Commands\59\Command29=false
-Commands\60\Type=CIV Transceive
-Commands\60\String=\\x1a\\x05\\x00\\x95
+Commands\60\Type=RIT Status
+Commands\60\String=\\x21\\x00
 Commands\60\Min=0
-Commands\60\Max=1
+Commands\60\Max=0
 Commands\60\Command29=false
-Commands\61\Type=RIT Status
-Commands\61\String=\\x21\\x00
+Commands\61\Type=RIT Frequency
+Commands\61\String=\\x21\\x01
 Commands\61\Min=0
-Commands\61\Max=0
+Commands\61\Max=1
 Commands\61\Command29=false
-Commands\62\Type=RIT Frequency
-Commands\62\String=\\x21\\x01
+Commands\62\Type=Selected Freq
+Commands\62\String=\\x25\\x00
 Commands\62\Min=0
-Commands\62\Max=1
+Commands\62\Max=0
 Commands\62\Command29=false
-Commands\63\Type=Selected Freq
-Commands\63\String=\\x25\\x00
+Commands\63\Type=Unselected Freq
+Commands\63\String=\\x25\\x01
 Commands\63\Min=0
 Commands\63\Max=0
 Commands\63\Command29=false
-Commands\64\Type=Unselected Freq
-Commands\64\String=\\x25\\x01
+Commands\64\Type=Selected Mode
+Commands\64\String=\\x26\\x00
 Commands\64\Min=0
 Commands\64\Max=0
 Commands\64\Command29=false
-Commands\65\Type=Selected Mode
-Commands\65\String=\\x26\\x00
+Commands\65\Type=Unselected Mode
+Commands\65\String=\\x26\\x01
 Commands\65\Min=0
 Commands\65\Max=0
 Commands\65\Command29=false
-Commands\66\Type=Unselected Mode
-Commands\66\String=\\x26\\x01
+Commands\66\Type=Command Error FA
+Commands\66\String=\\xfa
 Commands\66\Min=0
 Commands\66\Max=0
 Commands\66\Command29=false
-Commands\67\Type=Command Error FA
-Commands\67\String=\\xfa
+Commands\67\Type=Command OK FB
+Commands\67\String=\\xfb
 Commands\67\Min=0
 Commands\67\Max=0
 Commands\67\Command29=false
-Commands\68\Type=Command OK FB
-Commands\68\String=\\xfb
-Commands\68\Min=0
-Commands\68\Max=0
-Commands\68\Command29=false
-Commands\size=68
+Commands\size=67
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Monitor Gain
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium Low
+Periodic\3\Command=Monitor Status
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Preamp Status
+Periodic\4\VFO=-1
+Periodic\5\Priority=Medium
+Periodic\5\Command=RF Gain
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Power
+Periodic\6\VFO=0
+Periodic\7\Priority=Highest
+Periodic\7\Command=S Meter
+Periodic\7\VFO=-1
+Periodic\8\Priority=Medium
+Periodic\8\Command=Selected Freq
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=Selected Mode
+Periodic\9\VFO=0
+Periodic\10\Priority=High
+Periodic\10\Command=Transceiver Status
+Periodic\10\VFO=0
+Periodic\11\Priority=Medium
+Periodic\11\Command=Tuner/ATU Status
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium Low
+Periodic\12\Command=Tuning Step
+Periodic\12\VFO=-1
+Periodic\13\Priority=Medium
+Periodic\13\Command=Unselected Freq
+Periodic\13\VFO=1
+Periodic\14\Priority=Medium
+Periodic\14\Command=Unselected Mode
+Periodic\14\VFO=1
+Periodic\size=14
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-718.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-718
 CIVAddress=94
 RigCtlDModel=3013
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -183,6 +184,28 @@ Commands\32\Min=0
 Commands\32\Max=0
 Commands\32\Command29=false
 Commands\size=32
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium
+Periodic\2\Command=Freq Get
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium
+Periodic\3\Command=Mode Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Preamp Status
+Periodic\4\VFO=-1
+Periodic\5\Priority=Highest
+Periodic\5\Command=S Meter
+Periodic\5\VFO=-1
+Periodic\6\Priority=High
+Periodic\6\Command=Transceiver Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Tuning Step
+Periodic\7\VFO=-1
+Periodic\size=7
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-7300.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-7300
 CIVAddress=148
 RigCtlDModel=3073
+NumberOfVFOs=1
 SpectrumSeqMax=11
 SpectrumAmpMax=160
 SpectrumLenMax=475
@@ -423,6 +424,61 @@ Commands\80\Min=0
 Commands\80\Max=0
 Commands\80\Command29=false
 Commands\size=80
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium High
+Periodic\2\Command=Data Off Mod Input
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium High
+Periodic\3\Command=DATA1 Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Monitor Gain
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Monitor Status
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium
+Periodic\6\Command=Overflow Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Preamp Status
+Periodic\7\VFO=-1
+Periodic\8\Priority=Medium
+Periodic\8\Command=RF Gain
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=RF Power
+Periodic\9\VFO=0
+Periodic\10\Priority=Highest
+Periodic\10\Command=S Meter
+Periodic\10\VFO=-1
+Periodic\11\Priority=Medium
+Periodic\11\Command=Scope Main Hold
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium High
+Periodic\12\Command=Scope Main Mode
+Periodic\12\VFO=0
+Periodic\13\Priority=Medium High
+Periodic\13\Command=Scope Main Span
+Periodic\13\VFO=0
+Periodic\14\Priority=Medium
+Periodic\14\Command=Scope Main Speed
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium
+Periodic\15\Command=Selected Freq
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium
+Periodic\16\Command=Selected Mode
+Periodic\16\VFO=0
+Periodic\17\Priority=High
+Periodic\17\Command=Transceiver Status
+Periodic\17\VFO=0
+Periodic\18\Priority=Medium Low
+Periodic\18\Command=Tuning Step
+Periodic\18\VFO=-1
+Periodic\size=18
 Spans\1\Num=0
 Spans\1\Name=±2.5 KHz
 Spans\1\Freq=2500

rigs/IC-746.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-746
 CIVAddress=86
 RigCtlDModel=3010
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -258,6 +259,34 @@ Commands\47\Min=0
 Commands\47\Max=0
 Commands\47\Command29=false
 Commands\size=47
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Mode Get
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Power
+Periodic\6\VFO=0
+Periodic\7\Priority=Highest
+Periodic\7\Command=S Meter
+Periodic\7\VFO=-1
+Periodic\8\Priority=High
+Periodic\8\Command=Transceiver Status
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium Low
+Periodic\9\Command=Tuning Step
+Periodic\9\VFO=-1
+Periodic\size=9
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-746PRO.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-746 PRO
 CIVAddress=102
 RigCtlDModel=3010
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -273,6 +274,34 @@ Commands\50\Min=0
 Commands\50\Max=0
 Commands\50\Command29=false
 Commands\size=50
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Mode Get
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Power
+Periodic\6\VFO=0
+Periodic\7\Priority=Highest
+Periodic\7\Command=S Meter
+Periodic\7\VFO=-1
+Periodic\8\Priority=High
+Periodic\8\Command=Transceiver Status
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium Low
+Periodic\9\Command=Tuning Step
+Periodic\9\VFO=-1
+Periodic\size=9
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-756.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-756
 CIVAddress=80
 RigCtlDModel=3026
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -128,6 +129,37 @@ Commands\21\Min=0
 Commands\21\Max=0
 Commands\21\Command29=false
 Commands\size=21
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Freq Set
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Gain
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium
+Periodic\7\Command=RF Power
+Periodic\7\VFO=0
+Periodic\8\Priority=Highest
+Periodic\8\Command=S Meter
+Periodic\8\VFO=-1
+Periodic\9\Priority=High
+Periodic\9\Command=Transceiver Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Tuning Step
+Periodic\10\VFO=-1
+Periodic\size=10
 Spans\size=0
 Inputs\size=0
 Bands\1\Num=6

rigs/IC-756PRO.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-756 PRO
 CIVAddress=92
 RigCtlDModel=3027
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -318,6 +319,37 @@ Commands\59\Min=0
 Commands\59\Max=0
 Commands\59\Command29=false
 Commands\size=59
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Mode Get
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Gain
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium
+Periodic\7\Command=RF Power
+Periodic\7\VFO=0
+Periodic\8\Priority=Highest
+Periodic\8\Command=S Meter
+Periodic\8\VFO=-1
+Periodic\9\Priority=High
+Periodic\9\Command=Transceiver Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Tuning Step
+Periodic\10\VFO=-1
+Periodic\size=10
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-756PROII.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-756 PRO II
 CIVAddress=100
 RigCtlDModel=3027
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -313,6 +314,37 @@ Commands\58\Min=0
 Commands\58\Max=0
 Commands\58\Command29=false
 Commands\size=58
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Set
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Mode Get
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Gain
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium
+Periodic\7\Command=RF Power
+Periodic\7\VFO=0
+Periodic\8\Priority=Highest
+Periodic\8\Command=S Meter
+Periodic\8\VFO=-1
+Periodic\9\Priority=High
+Periodic\9\Command=Transceiver Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Tuning Step
+Periodic\10\VFO=-1
+Periodic\size=10
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-756PROIII.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-756 PRO II
 CIVAddress=110
 RigCtlDModel=3027
+NumberOfVFOs=1
 SpectrumSeqMax=0
 SpectrumAmpMax=0
 SpectrumLenMax=0
@@ -313,6 +314,37 @@ Commands\58\Min=0
 Commands\58\Max=0
 Commands\58\Command29=false
 Commands\size=58
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium
+Periodic\3\Command=Freq Get
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium
+Periodic\4\Command=Mode Get
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Preamp Status
+Periodic\5\VFO=-1
+Periodic\6\Priority=Medium
+Periodic\6\Command=RF Gain
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium
+Periodic\7\Command=RF Power
+Periodic\7\VFO=0
+Periodic\8\Priority=Highest
+Periodic\8\Command=S Meter
+Periodic\8\VFO=-1
+Periodic\9\Priority=High
+Periodic\9\Command=Transceiver Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Tuning Step
+Periodic\10\VFO=-1
+Periodic\size=10
 Spans\size=0
 Inputs\1\Num=0
 Inputs\1\Reg=0

rigs/IC-7610.rig

@@ -714,6 +714,100 @@ Commands\138\Min=0
 Commands\138\Max=0
 Commands\138\Command29=false
 Commands\size=138
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=-1
+Periodic\3\Priority=Medium High
+Periodic\3\Command=Data Off Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium High
+Periodic\4\Command=DATA1 Mod Input
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium High
+Periodic\5\Command=DATA2 Mod Input
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium High
+Periodic\6\Command=DATA3 Mod Input
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Monitor Gain
+Periodic\7\VFO=0
+Periodic\8\Priority=Medium Low
+Periodic\8\Command=Monitor Status
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=Overflow Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Preamp Status
+Periodic\10\VFO=-1
+Periodic\11\Priority=Medium
+Periodic\11\Command=RF Gain
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium
+Periodic\12\Command=RF Power
+Periodic\12\VFO=0
+Periodic\13\Priority=Highest
+Periodic\13\Command=S Meter
+Periodic\13\VFO=-1
+Periodic\14\Priority=Medium
+Periodic\14\Command=Scope Main Hold
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium High
+Periodic\15\Command=Scope Main Mode
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium High
+Periodic\16\Command=Scope Main Span
+Periodic\16\VFO=0
+Periodic\17\Priority=Medium
+Periodic\17\Command=Scope Main Speed
+Periodic\17\VFO=0
+Periodic\18\Priority=Medium High
+Periodic\18\Command=Scope Main/Sub
+Periodic\18\VFO=0
+Periodic\19\Priority=Medium High
+Periodic\19\Command=Scope Single/Dual
+Periodic\19\VFO=0
+Periodic\20\Priority=Medium
+Periodic\20\Command=Scope Sub Hold
+Periodic\20\VFO=1
+Periodic\21\Priority=Medium High
+Periodic\21\Command=Scope Sub Mode
+Periodic\21\VFO=1
+Periodic\22\Priority=Medium High
+Periodic\22\Command=Scope Sub Span
+Periodic\22\VFO=1
+Periodic\23\Priority=Medium
+Periodic\23\Command=Scope Sub Speed
+Periodic\23\VFO=1
+Periodic\24\Priority=Medium
+Periodic\24\Command=Selected Freq
+Periodic\24\VFO=0
+Periodic\25\Priority=Medium
+Periodic\25\Command=Selected Mode
+Periodic\25\VFO=0
+Periodic\26\Priority=High
+Periodic\26\Command=Transceiver Status
+Periodic\26\VFO=0
+Periodic\27\Priority=Medium
+Periodic\27\Command=Tuner/ATU Status
+Periodic\27\VFO=0
+Periodic\28\Priority=Medium Low
+Periodic\28\Command=Tuning Step
+Periodic\28\VFO=0
+Periodic\29\Priority=Medium
+Periodic\29\Command=Unselected Freq
+Periodic\29\VFO=1
+Periodic\30\Priority=Medium
+Periodic\30\Command=Unselected Mode
+Periodic\30\VFO=1
+Periodic\31\Priority=Medium
+Periodic\31\Command=VFO Dual Watch
+Periodic\31\VFO=0
+Periodic\size=31
 Spans\1\Num=0
 Spans\1\Name=±2.5 KHz
 Spans\1\Freq=2500

rigs/IC-785x.rig

@@ -734,6 +734,103 @@ Commands\142\Min=0
 Commands\142\Max=0
 Commands\142\Command29=false
 Commands\size=142
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Antenna
+Periodic\1\VFO=0
+Periodic\2\Priority=Medium Low
+Periodic\2\Command=Attenuator Status
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium High
+Periodic\3\Command=Data Off Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium High
+Periodic\4\Command=DATA1 Mod Input
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium High
+Periodic\5\Command=DATA2 Mod Input
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium High
+Periodic\6\Command=DATA3 Mod Input
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Monitor Gain
+Periodic\7\VFO=0
+Periodic\8\Priority=Medium Low
+Periodic\8\Command=Monitor Status
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=Overflow Status
+Periodic\9\VFO=0
+Periodic\10\Priority=Medium Low
+Periodic\10\Command=Preamp Status
+Periodic\10\VFO=0
+Periodic\11\Priority=Medium
+Periodic\11\Command=RF Gain
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium
+Periodic\12\Command=RF Power
+Periodic\12\VFO=0
+Periodic\13\Priority=Highest
+Periodic\13\Command=S Meter
+Periodic\13\VFO=0
+Periodic\14\Priority=Medium
+Periodic\14\Command=Scope Main Hold
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium High
+Periodic\15\Command=Scope Main Mode
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium High
+Periodic\16\Command=Scope Main Span
+Periodic\16\VFO=0
+Periodic\17\Priority=Medium
+Periodic\17\Command=Scope Main Speed
+Periodic\17\VFO=0
+Periodic\18\Priority=Medium High
+Periodic\18\Command=Scope Main/Sub
+Periodic\18\VFO=0
+Periodic\19\Priority=Medium High
+Periodic\19\Command=Scope Single/Dual
+Periodic\19\VFO=0
+Periodic\20\Priority=Medium
+Periodic\20\Command=Scope Sub Hold
+Periodic\20\VFO=1
+Periodic\21\Priority=Medium High
+Periodic\21\Command=Scope Sub Mode
+Periodic\21\VFO=1
+Periodic\22\Priority=Medium High
+Periodic\22\Command=Scope Sub Span
+Periodic\22\VFO=1
+Periodic\23\Priority=Medium
+Periodic\23\Command=Scope Sub Speed
+Periodic\23\VFO=1
+Periodic\24\Priority=Medium
+Periodic\24\Command=Selected Freq
+Periodic\24\VFO=0
+Periodic\25\Priority=Medium
+Periodic\25\Command=Selected Mode
+Periodic\25\VFO=0
+Periodic\26\Priority=Medium Low
+Periodic\26\Command=Tone Squelch Type
+Periodic\26\VFO=0
+Periodic\27\Priority=High
+Periodic\27\Command=Transceiver Status
+Periodic\27\VFO=0
+Periodic\28\Priority=Medium
+Periodic\28\Command=Tuner/ATU Status
+Periodic\28\VFO=0
+Periodic\29\Priority=Medium Low
+Periodic\29\Command=Tuning Step
+Periodic\29\VFO=0
+Periodic\30\Priority=Medium
+Periodic\30\Command=Unselected Freq
+Periodic\30\VFO=1
+Periodic\31\Priority=Medium
+Periodic\31\Command=Unselected Mode
+Periodic\31\VFO=1
+Periodic\32\Priority=Medium
+Periodic\32\Command=VFO Dual Watch
+Periodic\32\VFO=0
+Periodic\size=32
 Spans\1\Num=0
 Spans\1\Name=±2.5 KHz
 Spans\1\Freq=2500

rigs/IC-905.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-905
 CIVAddress=172
 RigCtlDModel=0
+NumberOfVFOs=1
 SpectrumSeqMax=11
 SpectrumAmpMax=160
 SpectrumLenMax=475
@@ -538,6 +539,70 @@ Commands\103\Min=0
 Commands\103\Max=0
 Commands\103\Command29=false
 Commands\size=103
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium High
+Periodic\2\Command=Data Off Mod Input
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium High
+Periodic\3\Command=DATA1 Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Monitor Gain
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Monitor Status
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium
+Periodic\6\Command=Overflow Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Preamp Status
+Periodic\7\VFO=-1
+Periodic\8\Priority=Medium
+Periodic\8\Command=RF Gain
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=RF Power
+Periodic\9\VFO=0
+Periodic\10\Priority=Highest
+Periodic\10\Command=S Meter
+Periodic\10\VFO=-1
+Periodic\11\Priority=Medium
+Periodic\11\Command=Scope Main Hold
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium High
+Periodic\12\Command=Scope Main Mode
+Periodic\12\VFO=0
+Periodic\13\Priority=Medium High
+Periodic\13\Command=Scope Main Span
+Periodic\13\VFO=0
+Periodic\14\Priority=Medium
+Periodic\14\Command=Scope Main Speed
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium
+Periodic\15\Command=Selected Freq
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium
+Periodic\16\Command=Selected Mode
+Periodic\16\VFO=0
+Periodic\17\Priority=Medium Low
+Periodic\17\Command=Tone Squelch Type
+Periodic\17\VFO=-1
+Periodic\18\Priority=High
+Periodic\18\Command=Transceiver Status
+Periodic\18\VFO=0
+Periodic\19\Priority=Medium Low
+Periodic\19\Command=Tuning Step
+Periodic\19\VFO=-1
+Periodic\20\Priority=Medium
+Periodic\20\Command=Unselected Freq
+Periodic\20\VFO=1
+Periodic\21\Priority=Medium
+Periodic\21\Command=Unselected Mode
+Periodic\21\VFO=1
+Periodic\size=21
 Spans\1\Num=0
 Spans\1\Name=2.5 KHz
 Spans\1\Freq=2500

rigs/IC-9700.rig

@@ -6,6 +6,7 @@ Manufacturer=Icom
 Model=IC-9700
 CIVAddress=162
 RigCtlDModel=3081
+NumberOfVFOs=1
 SpectrumSeqMax=11
 SpectrumAmpMax=160
 SpectrumLenMax=475
@@ -633,6 +634,73 @@ Commands\122\Min=0
 Commands\122\Max=0
 Commands\122\Command29=false
 Commands\size=122
+Periodic\1\Priority=Medium Low
+Periodic\1\Command=Attenuator Status
+Periodic\1\VFO=-1
+Periodic\2\Priority=Medium High
+Periodic\2\Command=Data Off Mod Input
+Periodic\2\VFO=0
+Periodic\3\Priority=Medium High
+Periodic\3\Command=DATA1 Mod Input
+Periodic\3\VFO=0
+Periodic\4\Priority=Medium Low
+Periodic\4\Command=Monitor Gain
+Periodic\4\VFO=0
+Periodic\5\Priority=Medium Low
+Periodic\5\Command=Monitor Status
+Periodic\5\VFO=0
+Periodic\6\Priority=Medium
+Periodic\6\Command=Overflow Status
+Periodic\6\VFO=0
+Periodic\7\Priority=Medium Low
+Periodic\7\Command=Preamp Status
+Periodic\7\VFO=-1
+Periodic\8\Priority=Medium
+Periodic\8\Command=RF Gain
+Periodic\8\VFO=0
+Periodic\9\Priority=Medium
+Periodic\9\Command=RF Power
+Periodic\9\VFO=0
+Periodic\10\Priority=Highest
+Periodic\10\Command=S Meter
+Periodic\10\VFO=-1
+Periodic\11\Priority=Medium
+Periodic\11\Command=Scope Main Hold
+Periodic\11\VFO=0
+Periodic\12\Priority=Medium High
+Periodic\12\Command=Scope Main Mode
+Periodic\12\VFO=0
+Periodic\13\Priority=Medium High
+Periodic\13\Command=Scope Main Span
+Periodic\13\VFO=0
+Periodic\14\Priority=Medium
+Periodic\14\Command=Scope Main Speed
+Periodic\14\VFO=0
+Periodic\15\Priority=Medium
+Periodic\15\Command=Selected Freq
+Periodic\15\VFO=0
+Periodic\16\Priority=Medium
+Periodic\16\Command=Selected Mode
+Periodic\16\VFO=0
+Periodic\17\Priority=Medium Low
+Periodic\17\Command=Tone Squelch Type
+Periodic\17\VFO=-1
+Periodic\18\Priority=High
+Periodic\18\Command=Transceiver Status
+Periodic\18\VFO=0
+Periodic\19\Priority=Medium Low
+Periodic\19\Command=Tuning Step
+Periodic\19\VFO=-1
+Periodic\20\Priority=Medium
+Periodic\20\Command=Unselected Freq
+Periodic\20\VFO=1
+Periodic\21\Priority=Medium
+Periodic\21\Command=Unselected Mode
+Periodic\21\VFO=1
+Periodic\22\Priority=Medium
+Periodic\22\Command=VFO Dual Watch
+Periodic\22\VFO=0
+Periodic\size=22
 Spans\1\Num=0
 Spans\1\Name=±2.5 KHz
 Spans\1\Freq=2500

spectrumscope.cpp

@@ -1409,14 +1409,25 @@ void spectrumScope::receiveMode(modeInfo m)
                 queue->del(funcFilterWidth,vfo);
             }
 
+#if defined __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
+#endif
+
             switch (m.mk) {
-            case modeLSB:
-            case modeUSB:
-                passbandCenterFrequency = 0.0015;
+                // M0VSE this needs to be replaced with 1/2 the "actual" width of the RTTY signal+the mark freq.
             case modeRTTY:
             case modeRTTY_R:
+                passbandCenterFrequency = 0.00008925;
+                queue->del(funcCwPitch,vfo);
+                queue->del(funcDashRatio,vfo);
+                queue->del(funcKeySpeed,vfo);
+                break;
+            case modeLSB:
+            case modeUSB:
             case modePSK:
             case modePSK_R:
+                passbandCenterFrequency = 0.0015;
             case modeAM:
                 queue->del(funcCwPitch,vfo);
                 queue->del(funcDashRatio,vfo);
@@ -1442,6 +1453,9 @@ void spectrumScope::receiveMode(modeInfo m)
                 queue->del(funcKeySpeed,vfo);
                 break;
             }
+#if defined __GNUC__
+#pragma GCC diagnostic pop
+#endif
 
         }
         mode = m;
@@ -1499,6 +1513,7 @@ void spectrumScope::receivePassband(quint16 pass)
 
 void spectrumScope::selected(bool en)
 {
+    isActive = en;
     if (en)
         this->setStyleSheet("QGroupBox { border:1px solid red;}");
     else
@@ -1636,21 +1651,53 @@ void spectrumScope::wfTheme(int num)
     configTheme->setCurrentIndex(configTheme->findData(currentTheme));
 }
 
-void spectrumScope::setPBTInner (double hz) {
-    PBTInner = hz;
-    double pbFreq = ((double)(this->PBTInner) / this->passbandWidth) * 127.0;
-    qint16 newFreq = pbFreq + 128;
-    if (newFreq >= 0 && newFreq <= 255) {
-        configPbtInner->setValue(newFreq);
+void spectrumScope::setPBTInner (uchar val) {
+    qint16 shift = (qint16)(val - 128);
+    double tempVar = ceil((shift / 127.0) * passbandWidth * 20000.0) / 20000.0;
+    // tempVar now contains value to the nearest 50Hz If CW mode, add/remove the cwPitch.
+    double pitch = 0.0;
+    if ((this->mode.mk == modeCW || this->mode.mk == modeCW_R) && this->passbandWidth > 0.0006)
+    {
+        pitch = (600.0 - cwPitch) / 1000000.0;
+    }
+
+    double newPBT = round((tempVar + pitch) * 200000.0) / 200000.0; // Nearest 5Hz.
+
+    if (newPBT != this->PBTInner) {
+        this->PBTInner = newPBT;
+        qInfo(logSystem()) << "New PBT Inner value received" << this->PBTInner << "CW Pitch" << this->cwPitch << "Passband" << this->passbandWidth;
+        double pbFreq = ((double)(this->PBTInner) / this->passbandWidth) * 127.0;
+        qint16 newFreq = pbFreq + 128;
+        if (newFreq >= 0 && newFreq <= 255) {
+            configPbtInner->blockSignals(true);
+            configPbtInner->setValue(newFreq);
+            configPbtInner->blockSignals(false);
+        }
     }
 }
 
-void spectrumScope::setPBTOuter (double hz) {
-    PBTOuter = hz;
-    double pbFreq = ((double)(this->PBTOuter) / this->passbandWidth) * 127.0;
-    qint16 newFreq = pbFreq + 128;
-    if (newFreq >= 0 && newFreq <= 255) {
-        configPbtOuter->setValue(newFreq);
+void spectrumScope::setPBTOuter (uchar val) {
+    qint16 shift = (qint16)(val - 128);
+    double tempVar = ceil((shift / 127.0) * this->passbandWidth * 20000.0) / 20000.0;
+    // tempVar now contains value to the nearest 50Hz If CW mode, add/remove the cwPitch.
+    double pitch = 0.0;
+    if ((this->mode.mk == modeCW || this->mode.mk == modeCW_R) && this->passbandWidth > 0.0006)
+    {
+        pitch = (600.0 - cwPitch) / 1000000.0;
+    }
+
+    double newPBT = round((tempVar + pitch) * 200000.0) / 200000.0; // Nearest 5Hz.
+
+    if (newPBT != this->PBTOuter) {
+        this->PBTOuter = newPBT;
+        qInfo(logSystem()) << "New PBT Outer value received" << this->PBTOuter << "CW Pitch" << this->cwPitch << "Passband" << this->passbandWidth;
+        double pbFreq = ((double)(this->PBTOuter) / this->passbandWidth) * 127.0;
+        qint16 newFreq = pbFreq + 128;
+        if (newFreq >= 0 && newFreq <= 255) {
+            configPbtOuter->blockSignals(true);
+            configPbtOuter->setValue(newFreq);
+            configPbtOuter->blockSignals(false);
+        }
     }
 }
 

spectrumscope.h

@@ -64,10 +64,10 @@ public:
     void receivePassband(quint16 pass);
 
     double getPBTInner () { return PBTInner;}
-    void setPBTInner (double hz);
+    void setPBTInner (uchar val);
 
     double getPBTOuter () { return PBTOuter;}
-    void setPBTOuter (double hz);
+    void setPBTOuter (uchar val);
 
     quint16 getStepSize () { return stepSize;}
     void setStepSize (quint16 hz) { stepSize = hz;}
@@ -88,6 +88,7 @@ public:
     void addFilter(QString text, QVariant data) {filterCombo->blockSignals(true); filterCombo->addItem(text,data); filterCombo->blockSignals(false);}
 
     void selected(bool);
+    bool isSelected() {return isActive;}
     void setHold(bool h);
     void setSpeed(uchar s);
     void displaySettings(int NumDigits, qint64 Minf, qint64 Maxf, int MinStep,FctlUnit unit,std::vector<bandType>* bands = Q_NULLPTR);
@@ -269,6 +270,7 @@ private:
     // Assorted settings
     bool tuningFloorZeros=false;
     bool clickDragTuning=false;
+    bool isActive;
 };
 
 #endif // SPECTRUMSCOPE_H

systemd/README

@@ -0,0 +1,11 @@
+
+
+in order to be able to autostart wfserver, this simple unitfile made by
+Mick VK3ADD, will help you.
+
+path and suggested name of the file:
+
+
+/etc/systemd/system/wfserver.service
+
+

systemd/wfserver.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=WF Server
+After=network.target
+StartLimitIntervalSec=0
+[Service]
+Type=simple
+Restart=always
+RestartSec=1
+User=pi
+ExecStart=/usr/local/bin/wfserver
+[Install]
+WantedBy=multi-user.target

wfmain.cpp

@@ -96,7 +96,6 @@ wfmain::wfmain(const QString settingsFile, const QString logFile, bool debugMode
     qRegisterMetaType<memoryType>();
     qRegisterMetaType<antennaInfo>();
     qRegisterMetaType<scopeData>();
-    qRegisterMetaType<queueItemType>();
     qRegisterMetaType<queueItem>();
     qRegisterMetaType<cacheItem>();
     qRegisterMetaType<spectrumBounds>();
@@ -131,6 +130,11 @@ wfmain::wfmain(const QString settingsFile, const QString logFile, bool debugMode
         QStringList rigs = systemRigDir.entryList(QStringList() << "*.rig" << "*.RIG", QDir::Files);
         for (QString &rig: rigs) {
             QSettings* rigSettings = new QSettings(systemRigDir.absoluteFilePath(rig), QSettings::Format::IniFormat);
+
+#if (QT_VERSION < QT_VERSION_CHECK(6,0,0))
+            rigSettings->setIniCodec("UTF-8");
+#endif
+
             if (!rigSettings->childGroups().contains("Rig"))
             {
                 qWarning() << rig << "Does not seem to be a rig description file";
@@ -512,10 +516,10 @@ void wfmain::makeRig()
                 });
 
         connect(this->rpt, &repeaterSetup::setTransmitFrequency, this->rig,
-                [=](const freqt &transmitFreq) { queue->add(priorityImmediate,queueItem(funcFreqSet,QVariant::fromValue<freqt>(transmitFreq),false));});
+                [=](const freqt &transmitFreq) { queue->add(priorityImmediate,queueItem(funcUnselectedFreq,QVariant::fromValue<freqt>(transmitFreq),false));});
 
         connect(this->rpt, &repeaterSetup::setTransmitMode, this->rig,
-                [=](const modeInfo &transmitMode) {  queue->add(priorityImmediate,queueItem(funcModeSet,QVariant::fromValue<modeInfo>(transmitMode),false));});
+                [=](const modeInfo &transmitMode) { queue->add(priorityImmediate,queueItem(funcModeSet,QVariant::fromValue<modeInfo>(transmitMode),false));});
 
         connect(this->rpt, &repeaterSetup::selectVFO, this->rig,
                 [=](const vfo_t &v) { queue->add(priorityImmediate,queueItem(funcSelectVFO,QVariant::fromValue<vfo_t>(v),false));});
@@ -710,29 +714,6 @@ void wfmain::receiveStatusUpdate(networkStatus status)
 
 void wfmain::receiveNetworkAudioLevels(networkAudioLevels l)
 {
-    /*
-    meter_t m2mtr = ui->meter2Widget->getMeterType();
-
-    if(m2mtr == meterAudio)
-    {
-        if(amTransmitting)
-        {
-            if(l.haveTxLevels)
-                ui->meter2Widget->setLevels(l.txAudioRMS, l.txAudioPeak);
-        } else {
-            if(l.haveRxLevels)
-                ui->meter2Widget->setLevels(l.rxAudioRMS, l.rxAudioPeak);
-        }
-    } else if (m2mtr == meterTxMod) {
-        if(l.haveTxLevels)
-            ui->meter2Widget->setLevels(l.txAudioRMS, l.txAudioPeak);
-    } else if (m2mtr == meterRxAudio) {
-        if(l.haveRxLevels)
-            ui->meter2Widget->setLevels(l.rxAudioRMS, l.rxAudioPeak);
-    }
-    */
-
-
     meter_t m = meterNone;
     if(l.haveRxLevels)
     {
@@ -744,19 +725,10 @@ void wfmain::receiveNetworkAudioLevels(networkAudioLevels l)
         m = meterTxMod;
         receiveMeter(m, l.txAudioPeak);
     }
-
 }
 
 void wfmain::setupMainUI()
 {
-    ui->meter2Widget->hide();
-    ui->meter3Widget->hide();
-
-    // Future ideas:
-    //ui->meter2selectionCombo->addItem("Transmit Audio", meterTxMod);
-    //ui->meter2selectionCombo->addItem("Receive Audio", meterRxAudio);
-    //ui->meter2selectionCombo->addItem("Latency", meterLatency);
-
     // Set scroll wheel response (tick interval)
     // and set arrow key response (single step)
     ui->rfGainSlider->setTickInterval(100);
@@ -3937,8 +3909,13 @@ void wfmain::receiveRigID(rigCapabilities rigCaps)
         // Set the second meter here as I suspect we need to be connected for it to work?
         changeMeterType(prefs.meter2Type, 2);
         changeMeterType(prefs.meter3Type, 3);
+        ui->meter2Widget->blockMeterType(prefs.meter3Type);
+        ui->meter3Widget->blockMeterType(prefs.meter2Type);
         ui->meter2Widget->setCompReverse(prefs.compMeterReverse);
         ui->meter3Widget->setCompReverse(prefs.compMeterReverse);
+
+
+
 //        for (int i = 0; i < ui->meter2selectionCombo->count(); i++)
 //        {
 //            if (static_cast<meter_t>(ui->meter2selectionCombo->itemData(i).toInt()) == prefs.meter2Type)
@@ -3962,6 +3939,21 @@ void wfmain::initPeriodicCommands()
 
     queue->clear();
 
+    foreach (auto cap, rigCaps.periodic) {
+        if (cap.vfo == -1) {
+            for (uchar v=0;v<rigCaps.numVFO;v++)
+            {
+                qDebug(logSystem()) << "Inserting command" << funcString[cap.func] << "priority" << cap.priority << "on VFO" << QString::number(v);
+                queue->add(queuePriority(cap.prioVal),cap.func,true,v);
+            }
+        }
+        else {
+            qDebug(logSystem()) << "Inserting command" << funcString[cap.func] << "priority" << cap.priority << "on VFO" << QString::number(cap.vfo);
+            queue->add(queuePriority(cap.prioVal),cap.func,true,cap.vfo);
+        }
+    }
+
+/*
     queue->add(priorityMedium,funcSelectedFreq,true,false);
     queue->add(priorityMedium,funcSelectedMode,true,false);
     //queue->add(priorityMedium,(rigCaps.commands.contains(funcSelectedMode)?funcNone:funcDataModeWithFilter),true,false);
@@ -4007,6 +3999,9 @@ void wfmain::initPeriodicCommands()
     queue->add(priorityMediumLow,funcToneSquelchType,true,false);
 
     queue->add(priorityHighest,queueItem(funcSMeter,true));
+
+
+    */
     meter* marray[2];
     marray[0] = ui->meter2Widget;
     marray[1] = ui->meter3Widget;
@@ -4296,13 +4291,16 @@ void wfmain::on_tuneNowBtn_clicked()
 {
     queue->addUnique(priorityImmediate,queueItem(funcTunerStatus,QVariant::fromValue<uchar>(2U)));
     showStatusBarText("Starting ATU tuning cycle...");
+    ATUCheckTimer.setSingleShot(true);
+    ATUCheckTimer.start(5000);
 }
 
 void wfmain::on_tuneEnableChk_clicked(bool checked)
 {
     queue->addUnique(priorityImmediate,queueItem(funcTunerStatus,QVariant::fromValue<uchar>(checked)));
-
     showStatusBarText(QString("Turning %0 ATU").arg(checked?"on":"off"));
+    ATUCheckTimer.setSingleShot(true);
+    ATUCheckTimer.start(5000);
 }
 
 bool wfmain::on_exitBtn_clicked()
@@ -4382,20 +4380,24 @@ void wfmain::receiveATUStatus(unsigned char atustatus)
             ui->tuneEnableChk->blockSignals(true);
             ui->tuneEnableChk->setChecked(false);
             ui->tuneEnableChk->blockSignals(false);
-            showStatusBarText("ATU not enabled.");
+            if(ATUCheckTimer.isActive())
+                showStatusBarText("ATU not enabled.");
             break;
         case 0x01:
             // ATU enabled
             ui->tuneEnableChk->blockSignals(true);
             ui->tuneEnableChk->setChecked(true);
             ui->tuneEnableChk->blockSignals(false);
-            showStatusBarText("ATU enabled.");
+            if(ATUCheckTimer.isActive())
+                showStatusBarText("ATU enabled.");
             break;
         case 0x02:
             // ATU tuning in-progress.
             // Add command queue to check again and update status bar
             // qInfo(logSystem()) << "Received ATU status update that *tuning* is taking place";
             showStatusBarText("ATU is Tuning...");
+            ATUCheckTimer.stop();
+            ATUCheckTimer.start(5000);
             queue->add(priorityHighest,funcTunerStatus);
             break;
         default:
@@ -4638,8 +4640,12 @@ void wfmain::receiveTuningStep(unsigned char step)
     }
 }
 
-void wfmain::receiveMeter(meter_t inMeter, unsigned char level)
+void wfmain::receiveMeter(meter_t inMeter, unsigned char level,unsigned char vfo)
 {
+    // Currently do nothing with meters from second VFO
+    if (vfo)
+        return;
+
     switch(inMeter)
     {
     // These first two meters, S and Power,
@@ -4799,20 +4805,26 @@ void wfmain::on_rxAntennaCheck_clicked(bool value)
     queue->add(priorityImmediate,queueItem(funcAntenna,QVariant::fromValue<antennaInfo>(ant),false));
 }
 
-void wfmain::receivePreamp(unsigned char pre)
+void wfmain::receivePreamp(unsigned char pre, uchar vfo)
 {
-    ui->preampSelCombo->setCurrentIndex(ui->preampSelCombo->findData(pre));
+    if (!vfo) {
+        ui->preampSelCombo->setCurrentIndex(ui->preampSelCombo->findData(pre));
+    }
 }
 
-void wfmain::receiveAttenuator(unsigned char att)
+void wfmain::receiveAttenuator(unsigned char att, uchar vfo)
 {
-    ui->attSelCombo->setCurrentIndex(ui->attSelCombo->findData(att));
+    if (!vfo) {
+        ui->attSelCombo->setCurrentIndex(ui->attSelCombo->findData(att));
+    }
 }
 
-void wfmain::receiveAntennaSel(unsigned char ant, bool rx)
+void wfmain::receiveAntennaSel(unsigned char ant, bool rx, uchar vfo)
 {
-    ui->antennaSelCombo->setCurrentIndex(ant);
-    ui->rxAntennaCheck->setChecked(rx);
+    if (!vfo) {
+        ui->antennaSelCombo->setCurrentIndex(ant);
+        ui->rxAntennaCheck->setChecked(rx);
+    }
 }
 
 void wfmain::calculateTimingParameters()
@@ -5046,7 +5058,6 @@ void wfmain::changeMeterType(meter_t m, int meterNum)
 
     if(newMeterType==meterNone)
     {
-        uiMeter->hide();
         uiMeter->setMeterType(newMeterType);
     } else {
         uiMeter->show();
@@ -5423,23 +5434,27 @@ void wfmain::receiveValue(cacheItem val){
     }
     switch (val.command)
     {
+    case funcFreqGet:
+    case funcFreqTR:
+        // If current VFO (0) isn't selected, then send this to other VFO
+        if (!vfos[val.vfo]->isSelected()){
+            val.vfo=!bool(val.vfo);
+        }
+        vfos[val.vfo]->setFrequency(val.value.value<freqt>());
+        break;
+
 #if defined __GNUC__
 #pragma GCC diagnostic push
 #pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
 #endif
+
     case funcUnselectedFreq:
         val.vfo=1;
-    case funcFreqGet:
-    case funcFreqTR:
     case funcSelectedFreq:
     {
-        freqt f = val.value.value<freqt>();
-
-        vfos[val.vfo]->setFrequency(f);
+        vfos[val.vfo]->setFrequency(val.value.value<freqt>());
+        rpt->handleUpdateCurrentMainFrequency(val.value.value<freqt>());
     }
-#if defined __GNUC__
-#pragma GCC diagnostic pop
-#endif
     case funcReadTXFreq:
         break;
     case funcVFODualWatch:
@@ -5447,20 +5462,24 @@ void wfmain::receiveValue(cacheItem val){
         break;
     case funcModeGet:
     case funcModeTR:
-    case funcSelectedMode:
-        if (vfos.size()) {
-            vfos[0]->receiveMode(val.value.value<modeInfo>());
-            finputbtns->updateCurrentMode(val.value.value<modeInfo>().mk);
-            finputbtns->updateFilterSelection(val.value.value<modeInfo>().filter);
-            rpt->handleUpdateCurrentMainMode(val.value.value<modeInfo>());
-            cw->handleCurrentModeUpdate(val.value.value<modeInfo>().mk);
+        // If current VFO (0) isn't selected, then send this to other VFO
+        if (!vfos[val.vfo]->isSelected()){
+            val.vfo=!bool(val.vfo);
         }
+    case funcSelectedMode:
+        vfos[val.vfo]->receiveMode(val.value.value<modeInfo>());
+        finputbtns->updateCurrentMode(val.value.value<modeInfo>().mk);
+        finputbtns->updateFilterSelection(val.value.value<modeInfo>().filter);
+        rpt->handleUpdateCurrentMainMode(val.value.value<modeInfo>());
+        cw->handleCurrentModeUpdate(val.value.value<modeInfo>().mk);
         break;
     case funcUnselectedMode:
         val.vfo=1;
-        if (vfos.size()>1)
-            vfos[1]->receiveMode(val.value.value<modeInfo>());
+        vfos[val.vfo]->receiveMode(val.value.value<modeInfo>());
         break;
+#if defined __GNUC__
+#pragma GCC diagnostic pop
+#endif
     case funcVFOBandMS:
         break;
     case funcSatelliteMemory:
@@ -5483,31 +5502,17 @@ void wfmain::receiveValue(cacheItem val){
         receiveTuningStep(val.value.value<uchar>());
         break;
     case funcAttenuator:
-        receiveAttenuator(val.value.value<uchar>());
+        receiveAttenuator(val.value.value<uchar>(),val.vfo);
         break;
     case funcAntenna:
-        receiveAntennaSel(val.value.value<antennaInfo>().antenna,val.value.value<antennaInfo>().rx);
+        receiveAntennaSel(val.value.value<antennaInfo>().antenna,val.value.value<antennaInfo>().rx,val.vfo);
         break;
     case funcPBTOuter:
+        vfos[val.vfo]->setPBTOuter(val.value.value<uchar>());
+        break;
     case funcPBTInner:
     {
-        uchar level = val.value.value<uchar>();
-        qint16 shift = (qint16)(level - 128);
-        double tempVar = ceil((shift / 127.0) * vfos[val.vfo]->getPassbandWidth() * 20000.0) / 20000.0;
-        // tempVar now contains value to the nearest 50Hz If CW mode, add/remove the cwPitch.
-        double pitch = 0.0;
-        modeInfo mode = vfos[val.vfo]->currentMode();
-        if ((mode.mk == modeCW || mode.mk == modeCW_R) && vfos[val.vfo]->getPassbandWidth() > 0.0006)
-        {
-                pitch = (600.0 - cwPitch) / 1000000.0;
-        }
-        double newVal = round((tempVar + pitch) * 200000.0) / 200000.0; // Nearest 5Hz.
-
-        if (val.command == funcPBTInner) {
-            vfos[val.vfo]->setPBTInner(newVal);
-        } else {
-            vfos[val.vfo]->setPBTOuter(newVal);
-        }
+        vfos[val.vfo]->setPBTInner(val.value.value<uchar>());
         break;
     }
     case funcIFShift:
@@ -5524,6 +5529,7 @@ void wfmain::receiveValue(cacheItem val){
         foreach (auto vfo, vfos) {
             vfo->receiveCwPitch(val.value.value<uchar>());
         }
+        // Also send to CW window
         cw->handlePitch(val.value.value<uchar>());
         break;
     case funcMicGain:
@@ -5572,7 +5578,7 @@ void wfmain::receiveValue(cacheItem val){
     case funcSMeterSqlStatus:
         break;
     case funcSMeter:
-        receiveMeter(meter_t::meterS,val.value.value<uchar>());
+        receiveMeter(meter_t::meterS,val.value.value<uchar>(),val.vfo);
         break;
     case funcVariousSql:
         break;
@@ -5582,29 +5588,29 @@ void wfmain::receiveValue(cacheItem val){
         }
         break;
     case funcCenterMeter:
-        receiveMeter(meter_t::meterCenter,val.value.value<uchar>());
+        receiveMeter(meter_t::meterCenter,val.value.value<uchar>(),val.vfo);
         break;
     case funcPowerMeter:
-        receiveMeter(meter_t::meterPower,val.value.value<uchar>());
+        receiveMeter(meter_t::meterPower,val.value.value<uchar>(),val.vfo);
         break;
     case funcSWRMeter:
-        receiveMeter(meter_t::meterSWR,val.value.value<uchar>());
+        receiveMeter(meter_t::meterSWR,val.value.value<uchar>(),val.vfo);
         break;
     case funcALCMeter:
-        receiveMeter(meter_t::meterALC,val.value.value<uchar>());
+        receiveMeter(meter_t::meterALC,val.value.value<uchar>(),val.vfo);
         break;
     case funcCompMeter:
-        receiveMeter(meter_t::meterComp,val.value.value<uchar>());
+        receiveMeter(meter_t::meterComp,val.value.value<uchar>(),val.vfo);
         break;
     case funcVdMeter:
-        receiveMeter(meter_t::meterVoltage,val.value.value<uchar>());
+        receiveMeter(meter_t::meterVoltage,val.value.value<uchar>(),val.vfo);
         break;
     case funcIdMeter:
-        receiveMeter(meter_t::meterCurrent,val.value.value<uchar>());
+        receiveMeter(meter_t::meterCurrent,val.value.value<uchar>(),val.vfo);
         break;
     // 0x16 enable/disable functions:
     case funcPreamp:
-        receivePreamp(val.value.value<uchar>());
+        receivePreamp(val.value.value<uchar>(),val.vfo);
         break;
     case funcAGCTime:
         break;
@@ -5801,7 +5807,7 @@ void wfmain::receiveValue(cacheItem val){
                     vfos[0]->selected(!subScope);
                     vfos[1]->selected(subScope);
                 } else {
-                    vfos[0]->selected(false);
+                    vfos[0]->selected(true);
                     vfos[1]->selected(false);
                 }
             }

wfmain.h

@@ -395,7 +395,7 @@ private slots:
     void receiveIFShift(unsigned char level);
 
     // Meters:
-    void receiveMeter(meter_t meter, unsigned char level);
+    void receiveMeter(meter_t meter, unsigned char level, unsigned char vfo=0);
 //    void receiveSMeter(unsigned char level);
 //    void receivePowerMeter(unsigned char level);
 //    void receiveALCMeter(unsigned char level);
@@ -403,9 +403,9 @@ private slots:
 
 
     void receiveATUStatus(unsigned char atustatus);
-    void receivePreamp(unsigned char pre);
-    void receiveAttenuator(unsigned char att);
-    void receiveAntennaSel(unsigned char ant, bool rx);
+    void receivePreamp(unsigned char pre, uchar vfo);
+    void receiveAttenuator(unsigned char att, uchar vfo);
+    void receiveAntennaSel(unsigned char ant, bool rx,uchar vfo);
     void receiveRigID(rigCapabilities rigCaps);
     void receiveFoundRigID(rigCapabilities rigCaps);
     void receivePortError(errorType err);
@@ -513,6 +513,7 @@ private:
     void initLogging();
     QTimer logCheckingTimer;
     int logCheckingOldPosition = 0;
+    QTimer ATUCheckTimer;
 
     QCustomPlot *plot; // line plot
     QCustomPlot *wf; // waterfall image

wfview.pro

@@ -115,17 +115,22 @@ unix:target.path = $$PREFIX/bin
 INSTALLS += target
 
 # Why doesn't this seem to do anything?
-unix:DISTFILES += resources/wfview.png \
+unix:DISTFILES += resources/unix_icons/wfview.png \
     resources/install.sh
 unix:DISTFILES += resources/wfview.desktop
+unix:DISTFILES += resources/org.wfview.wfview.metainfo.xml
 
 unix:applications.files = resources/wfview.desktop
 unix:applications.path = $$PREFIX/share/applications
 INSTALLS += applications
 
-unix:pixmaps.files = resources/wfview.png
-unix:pixmaps.path = $$PREFIX/share/pixmaps
-INSTALLS += pixmaps
+unix:icons.files = resources/unix_icons/wfview.png
+unix:icons.path = $$PREFIX/share/icons/hicolor/256x256/apps
+INSTALLS += icons
+
+unix:metainfo.files = resources/org.wfview.wfview.metainfo.xml
+unix:metainfo.path = $$PREFIX/share/metainfo
+INSTALLS += metainfo
 
 unix:stylesheets.files = qdarkstyle
 unix:stylesheets.path = $$PREFIX/share/wfview

wfviewtypes.h

@@ -209,7 +209,7 @@ cmdLCDWaterfall, cmdLCDSpectrum, cmdLCDNothing, cmdSeparator
 
 
 // funcs and funcString MUST match exactly (and NUMFUNCS must be updated)
-#define NUMFUNCS 212
+#define NUMFUNCS 244
 
 enum funcs { funcNone,
 funcFreqTR,             funcModeTR,             funcBandEdgeFreq,           funcFreqGet,        	funcModeGet,        	funcFreqSet,			// \x00
@@ -244,6 +244,12 @@ funcScopeMainSub,       funcScopeSingleDual,	funcScopeMainMode,          funcSco
 funcScopeMainEdge,      funcScopeSubEdge,       funcScopeMainHold,          funcScopeSubHold,       funcScopeMainRef,       funcScopeSubRef,
 funcScopeMainSpeed,     funcScopeSubSpeed,      funcScopeMainVBW,           funcScopeSubVBW,        funcScopeMainRBW,       funcScopeSubRBW,
 funcScopeDuringTX,      funcScopeCenterType,    funcScopeFixedEdgeFreq,     funcVoiceTX,			funcMainSubPrefix,		funcAFCSetting,
+funcSSBRXHPFLPF,        funcSSBRXBass,          funcSSBRXTreble,            FuncAMRXHPFLPF,         funcAMRXBass,           funcAMRXTreble,
+funcFMRXHPFLPF,         funcFMRXBass,           funcFMRXTreble,             FuncCWRXHPFLPF,         funcCWRXTreble,         funcCWRXBass,
+funcSSBTXHLPLPF,        funcSSBTXBass,          funcSSBTXTreble,            FuncAMTXHPFLPF,         funcAMTXBass,           funcAMTXTreble,
+funcFMTXHPFLPF,         funcFMTXBass,           funcFMTXTreble,             funcBeepLevel,          funcBeepLevelLimit,     funcBeepConfirmation,
+funcBandEdgeBeep,       funcBeepMain,           funcBeepSub,                funcRFSQLControl,       funcTXDelayHF,          funcTXDelay50m,
+funcTimeOutTimer,       funcTimeOutCIV,
 funcGPSTXMode,          funcSatelliteMemory,    funcGPSPosition,            funcMemoryGroup,        funcSelectVFO,          funcSeparator,
 funcLCDWaterfall,       funcLCDSpectrum,        funcLCDNothing,             funcPageUp,             funcPageDown,           funcVFOFrequency,
 funcVFOMode,            funcRigctlFunction,     funcRigctlLevel,            funcRigctlParam,        funcRXAudio,            funcTXAudio,
@@ -285,6 +291,12 @@ static QString funcString[] { "None",
 "Scope Main Edge",      "Scope Sub Edge",       "Scope Main Hold",          "Scope Sub Hold",       "Scope Main Ref",       "Scope Sub Ref",
 "Scope Main Speed",     "Scope Sub Speed",      "Scope Main VBW",           "Scope Sub VBW",        "Scope Main RBW",       "Scope Sub RBW",
 "Scope During TX",      "Scope Center Type",    "Scope Fixed Edge Freq",    "Voice TX",             "Main/Sub Prefix",      "AFC Function",
+"SSB RX HPFLPF",        "SSB RX Bass",          "SSB RX Treble",            "AM RX HPFLPF",         "AM RX Bass",           "AM RX Treble",
+"FM RX HPFLPF",         "FM RX Bass",           "FM RX Treble",             "CW RX HPFLPF",         "CW RX Bass",           "CW RX Treble",
+"SSB TX HPFLPF",        "SSB TX Bass",          "SSB TX Treble",            "AM TX HPFLPF",         "AM TX Bass",           "AM TX Treble",
+"FM TX HPFLPF",         "FM TX Bass",           "FM TX Treble",             "Beep Level",           "Beep Level Limit",     "Beep Confirmation",
+"Band Edge Beep",       "Beep Main Band",       "Beep Sub Band",            "RF SQL Control",       "TX Delay HF",          "TX Delay 50m",
+"Timeout Timer",        "Timeout C-IV",
 "GPS TX Mode",          "Satellite Memory",     "GPS Position",             "Memory Group",         "-Select VFO",          "-Seperator",
 "-LCD Waterfall",       "-LCD Spectrum",        "-LCD Nothing",             "-Page Up",             "-Page Down",           "-VFO Frequency",
 "-VFO Mode",            "-Rigctl Function",     "-Rigctl Level",            "-Rigctl Param",        "-RX Audio Data",       "-TX Audio Data",
@@ -413,6 +425,17 @@ enum usbCommandType{ commandButton, commandKnob, commandAny };
 enum usbFeatureType { featureReset,featureResetKeys, featureEventsA, featureEventsB, featureFirmware, featureSerial, featureButton, featureSensitivity, featureBrightness,
                       featureOrientation, featureSpeed, featureColor, featureOverlay, featureTimeout, featureLCD, featureGraph, featureLEDControl };
 
+
+struct periodicType {
+    periodicType() {};
+    periodicType(funcs func, QString priority, char vfo) : func(func), priority(priority), prioVal(0), vfo(vfo) {};
+    periodicType(funcs func, QString priority, int prioVal, char vfo) : func(func), priority(priority), prioVal(prioVal), vfo(vfo) {};
+    funcs func;
+    QString priority;
+    int prioVal;
+    char vfo;
+};
+
 inline QString getMeterDebug(meter_t m) {
     QString rtn = QString("Meter name: ");
     switch(m) {