remote wfview server). CPU usage seems higher but please check your
system.
Timing seems to be acceptable but could probably use some tweaks. S-
meter polling is 25ms for fast radios, and slower rates for slower
radios. Half-duplex serial radios receive 3x slower polling to make room
for replies.
For Freq, Mode, etc "regular" constant polling (new feature):
IC-9700 polling is 5 per second, IC-718 is 1-2 per second.
Just helps keep the UI in sync with changes taking place at the rig. The
polling is slow enough that it doesn't impact anything. But quick enough
that it catches discrepencies pretty quickly.
differences in band stacking register addresses (for example, the GEN
band on the 705 has a different address from the 7100 and the 7300).
This code was only tested with the 9700.
wfview has been tested with the following Icom radios over USB port:
IC-7300, IC-7610, IC-7851 (and IC-7850), and IC-9700. It likely works
fine with the IC-705 as well. At this time, the rig's CIV address must
be changed in the preference file to indicate the rig you are using, and
this must be in integer, not hex.