Phil Taylor
b669605e11
Add baud rate detection for remote rigs
2021-05-21 16:30:52 +01:00
Phil Taylor
e30cf248af
Add more features to rigstate
2021-05-20 08:31:51 +01:00
Elliott Liggett
908ec96567
Data Mode now sends the currently selected filter.
2021-05-08 23:46:44 -07:00
Elliott Liggett
14b0ba2151
The band stacking register now uses the newer integer frequency parsing.
...
We also communicate a little slower to the serial rigs, which seems more
reliable.
2021-05-07 14:52:19 -07:00
Phil Taylor
e041e6d1c5
Add code to select virtual serial port
2021-05-05 14:11:00 +01:00
Elliott Liggett
fa869dd270
Different timing on command polling for serial rigs.
2021-04-30 22:15:30 -07:00
Phil Taylor
119d328b17
Merge branch 'ui-enhance' into lan-alpha
2021-04-25 10:58:40 +01:00
Phil Taylor
40ba0385ca
More work on rigctld
2021-04-25 10:58:25 +01:00
Elliott Liggett
80cc3e6dc0
Added ability to read RIT status. Added RIT to initial rig query. Added
...
variables to handle delayed command timing values. Fixed bug in
frequency parsing code that had existed for some time. Changed tic marks
on RIT knob because I wanted more of them. Bumped startup initial rig
state queries to 100ms. May consider faster queries on startup since we
are going to need more things queried on startup.
2021-04-25 00:23:52 -07:00
Elliott Liggett
f619e9eca1
Receiver Incremental Tuning is in. The UI does not check the rig's
...
initial state yet, but the functions are partially in rigCommander for
that purpose.
2021-04-24 00:31:51 -07:00
Phil Taylor
93fc8a9f67
Merge branch 'ui-enhance' into lan-alpha
2021-04-21 09:17:31 +01:00
Elliott Liggett
3fa0dfaecd
Merge remote-tracking branch 'origin/lan-alpha' into ui-enhance
2021-04-20 08:54:23 -07:00
Phil Taylor
6623c2ced0
rigctl working (sort of) with WSJT-X
2021-04-20 12:29:10 +01:00
Elliott Liggett
2e5a4f05a4
Preliminary commit for power-on and power-off functionality. Is not
...
correct for most rigs.
2021-04-19 22:55:39 -07:00
Phil Taylor
cb434d694e
Fix linux compile error
2021-04-19 17:49:51 +01:00
Elliott Liggett
ce3c4dfe54
Now grabs scope state on startup. Found bug, did not fix, in the
...
frequency parsing code. Worked aroud it by using doubles for now.
2021-04-11 00:42:25 -07:00
Elliott Liggett
aac777eb07
Preamp and attenuator are now queried on startup. Additionally, the
...
preamp is checked when the attenuator is changed, and the attenuator is
checked with the preamp is changed. This helps the user understand if
the rig allows only one or the other to be active (such as the IC-9700).
2021-04-10 22:48:32 -07:00
Elliott Liggett
92f019b787
Attenuators are in! Please try them out!
2021-04-07 23:35:24 -07:00
Elliott Liggett
e4bbf62474
We can now read the repeater access mode and update the UI. What remains
...
is to be able to set the mode.
2021-04-04 23:46:44 -07:00
Elliott Liggett
e7f2d1eba8
Working read/write of Tone, TSQL, and DTCS tones/code. Some code is also
...
present now to change the mode being used (tone, tsql, DTCS, or some
combo of the two).
2021-04-04 23:33:56 -07:00
Elliott Liggett
8cc78e37bb
Tone, TSQL, and DTCS code added, but not complete.
2021-04-04 00:36:21 -07:00
Elliott Liggett
864b2f491a
Adding code to support a separate repeater setup window.
2021-03-30 23:37:35 -07:00
Phil Taylor
c2091e9c4e
Add local volume control for UDP connections.
2021-03-22 18:53:34 +00:00
Elliott Liggett
a26a352389
Changed frequency parameters to (mostly) unsigned 64-bit ints. This
...
makes all the rounding code very simple and removes many annoying lines
of code designed to handle errors induced by using doubles for the
frequency.
2021-03-22 00:11:43 -07:00
Phil Taylor
adaabec575
Move pseudoterm into dedicated class
2021-03-04 20:19:05 +00:00
Phil Taylor
91a60bf918
Create udpPreferences struct and remove civPort and audioPort from UI
2021-03-01 19:53:12 +00:00
Phil Taylor
18b287a047
Merge remote-tracking branch 'origin/ui-enhance' into lan-alpha
2021-03-01 08:30:04 +00:00
Elliott Liggett
5577aebf8b
Removed the last annoying legs of the center/fixed two-mode system.
2021-02-28 21:47:45 -08:00
Elliott Liggett
5a673e256c
Added support for Scroll modes in latest firmware. Removed setCenter...
...
signals and replaced with setScopeMode signals. Fixed a bug where we
could not query the scope mode.
2021-02-28 21:41:27 -08:00
Phil Taylor
aef03a6b7e
Add audio handling to UDP server
2021-02-28 20:10:07 +00:00
Phil Taylor
27eb855adb
Create rx audio packets with timestamp
...
Lots of other changes but if this works OK, I will update tx audio to use the same system.
2021-02-27 00:37:00 +00:00
Elliott Liggett
af2191da16
Cleaned up meter code, we can now query any meter we wish very easily,
...
either queued or directly.
2021-02-25 23:57:37 -08:00
Phil Taylor
ba0509ba61
Fix txaudio and move udphandler into its own thread
2021-02-21 14:53:42 +00:00
Elliott Liggett
c3e0fa7dbd
S-Meter working! Power meter working!
...
Needs more testing, but it's here! 100ms polling time.
2021-02-20 20:41:19 -08:00
Elliott Liggett
9793b9e1cb
Audio input gain slider now adjusts whatever the active MOD source is.
...
Text follows drop-down menu selection.
2021-02-20 00:05:23 -08:00
Elliott Liggett
3538e545d9
We can now set the modulation input and read the modulation input for
...
both data on and data off.
Next step is to change the "Mic" slider to adjust whatever input is
selected.
2021-02-19 00:14:40 -08:00
Elliott Liggett
98d9c470c5
Merge remote-tracking branch 'origin/lan-alpha' into ui-enhance
2021-02-18 21:48:09 -08:00
Elliott Liggett
5c50b82dba
Duplex controls now function. NB: "Auto" mode works as follows: User
...
selects "auto", rig does nothing, user changes frequency or band, and
then, the rig will automatically select the correct duplex mode. This is
the same way the rig works from the front panel.
2021-02-18 21:47:19 -08:00
Phil Taylor
ba60181c69
Merge remote-tracking branch 'origin/ui-enhance' into lan-alpha
2021-02-18 09:15:01 +00:00
Phil Taylor
7966568f17
Connect Civ to/from server
2021-02-18 09:14:41 +00:00
Elliott Liggett
3c93dc5fd0
Added code to get and set split and duplex mode. Untested.
2021-02-17 23:41:01 -08:00
Elliott Liggett
ce2f20753c
Completed code to set and get modulation levels for ACC, USB, and LAN
...
sources, as well as source selection/verification.
2021-02-17 23:26:10 -08:00
Elliott Liggett
a229fc9ccb
Contains code to set modulation input (mic, acc, usb, lan), and to set
...
the gain of each type. Is not tested.
2021-02-17 00:00:28 -08:00
Elliott Liggett
2c9e46626e
Preliminary changes to UI for repeater duplex. Staged change in
...
rigcommander.
2021-02-15 23:52:14 -08:00
Elliott Liggett
ca2a8e1235
Added code to check the scope reference level. Will add a on-startup
...
check next.
2021-02-15 22:33:21 -08:00
Elliott Liggett
a0e9392617
Added scope reference setting. Write-only for now. UI slider works.
2021-02-15 21:40:31 -08:00
Elliott Liggett
6938ed8a60
Full support for set and read mic gain and tx power. Code also exists to
...
set and read microphone compressor level, vox gain, anti vox, and self
audio monitor.
2021-02-15 20:32:14 -08:00
Elliott Liggett
7d0b926958
Added request and parse functions for most level and metering data.
2021-02-15 15:17:48 -08:00
Elliott Liggett
66e02a045a
Filters are now read correctly from mode messages. Filter setup menu is
...
still a placeholder.
2021-02-13 23:42:51 -08:00
Elliott Liggett
5d3c386c87
Added filter selection support.
...
TODO: Read current filter from rig.
2021-02-13 10:02:45 -08:00