Elliott Liggett
d4f46e60f1
Changed method for adding modes to rigs and populating the rig menu.
...
This should be easier to maintain and better in the long run.
2021-05-21 23:46:15 -07:00
Elliott Liggett
d776fb4331
Added IC-756 Pro. Tested UI and back-end response with 7300 and fake
...
RigID reply.
2021-05-20 16:15:25 -07:00
Elliott Liggett
8e85d0365f
Added additional support for the IC-756 Pro III. Essentially untested.
2021-05-20 15:57:30 -07:00
Elliott Liggett
e148bc94f4
Added basic IC-7410 rigcaps. Have not gone further than this with the
...
rig.
2021-05-14 23:58:22 -07:00
Elliott Liggett
497b4c8743
Preliminary IC-7000 support. TODO: Input selection, modes, filters,
...
reported bug with frequency input and s-meter.
2021-05-14 19:04:47 -07:00
Elliott Liggett
51fcf4f583
Preliminary (and untested) support for the IC-910H.
2021-05-08 13:45:52 -07:00
Phil Taylor
9c04d66b27
make bandType start at 0 so it doesn't overflow rigCaps.bsr
2021-05-01 19:42:32 +01:00
Elliott Liggett
7109c2b396
Added dynamic band buttons. Fixed multiple bugs related to various
...
differences in band stacking register addresses (for example, the GEN
band on the 705 has a different address from the 7100 and the 7300).
This code was only tested with the 9700.
2021-04-26 18:24:28 -07:00
Elliott Liggett
6b967a52b9
Antenna selection might work, untested.
2021-04-09 15:57:16 -07:00
Elliott Liggett
2cbbb26f00
Preamp data is now tracked (but not used yet)
2021-04-08 00:05:40 -07:00
Elliott Liggett
92f019b787
Attenuators are in! Please try them out!
2021-04-07 23:35:24 -07:00
Elliott Liggett
e7f2d1eba8
Working read/write of Tone, TSQL, and DTCS tones/code. Some code is also
...
present now to change the mode being used (tone, tsql, DTCS, or some
combo of the two).
2021-04-04 23:33:56 -07:00
Elliott Liggett
3538e545d9
We can now set the modulation input and read the modulation input for
...
both data on and data off.
Next step is to change the "Mic" slider to adjust whatever input is
selected.
2021-02-19 00:14:40 -08:00
Elliott Liggett
5d3c386c87
Added filter selection support.
...
TODO: Read current filter from rig.
2021-02-13 10:02:45 -08:00
Elliott Liggett
9f2d64d943
Added per-rig customization to UI: Modes and ATU status.
2021-02-12 22:42:34 -08:00
Elliott Liggett
50c638ed4b
Added preliminary support for IC-R8600. Untested.
2021-02-12 11:52:16 -08:00
Elliott Liggett
37f242ea39
Added DD and DV modes for IC-705 and IC-9700. Untested.
2021-02-11 09:09:45 -08:00
roeland jansen
53fd008f3a
Added support for various spectrum sizes and rig capability support.
...
wfview has been tested with the following Icom radios over USB port:
IC-7300, IC-7610, IC-7851 (and IC-7850), and IC-9700. It likely works
fine with the IC-705 as well. At this time, the rig's CIV address must
be changed in the preference file to indicate the rig you are using, and
this must be in integer, not hex.
2021-02-10 17:32:56 +00:00
Elliott Liggett
59c5113f43
Added preference file capability, additional radio identity functions.
2018-11-24 00:10:05 -08:00