the user if serial port isn't opening. Added command-line arguments for
serial port (example: "-p /dev/ttyUSB0" or "--port /dev/ttyUSB0").
Cleaned up some of the debug messages. wfview also will now tell the
user what radio was found in the status bar of the main window.
Added the begininning of code to determine the waveform type (center or
fixed). rigcommander now knows which is which. The next step is to emit
a signal when this changes, which then causes the main window to check
or uncheck the box (without triggering any other code).
Added some TODO remarks on mode (DV, DD).
Added some command line arguments that are not used at this time for --
host and --civ.
wfview has been tested with the following Icom radios over USB port:
IC-7300, IC-7610, IC-7851 (and IC-7850), and IC-9700. It likely works
fine with the IC-705 as well. At this time, the rig's CIV address must
be changed in the preference file to indicate the rig you are using, and
this must be in integer, not hex.
Elliott Liggett