mirror
/
wfview
kopia lustrzana https://gitlab.com/eliggett/wfview
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Updated README.md

merge-requests/1/merge
Elliott Liggett 2019-12-26 08:47:57 +00:00
rodzic 3414ef46ae
commit 8951b37ccf
1 zmienionych plików z 21 dodań i 16 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

37
README.md
Wyświetl plik

@ -15,7 +15,7 @@ Open Source Icom IC-7300 Visualizer and Controller, including waterfall view. Wi
5. libqcustomplot-dev
### Recommended:
* Debian-based Linux system (Debian Linux, Linux Mint, Ubuntu, etc).
* Debian-based Linux system (Debian Linux, Linux Mint, Ubuntu, etc). Any recent Linux system will do though!
* QT Creator for building, designing, and debugging w/gdb
### Build directions:
@ -27,22 +27,27 @@ Open Source Icom IC-7300 Visualizer and Controller, including waterfall view. Wi
4. Compile by running make.
### Rig setting:
1. Use default CI-V address (0x94)
2. Baud rate 115200
3. Turn on the bandscope on the rig screen
1. CI-V Baud rate: Auto
2. CI-V address: 94h (default)
3. CI-V Transceive ON
4. CI-V USB-> REMOTE Transceive Address: 00h
5. CI-V Output (for ANT): OFF
6. CI-V USB Port: Unlink from REMOTE
7. CI-V USB Baud Rate: 15200
8. CI-V USB Echo Back: OFF
9. Turn on the bandscope on the rig screen
* Note: The program currently assumes the device is on /dev/ttyUSB0. Make sure the port is writable by your username.
* Note: The program currently assumes the device is on a device like:
~~~
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_IC-7300_02010092-if00-port0
~~~
This is symlinked to a device like /dev/ttyUSB0 typically. Make sure the port is writable by your username. You can accomplish this using udev rules, or if you are in a hurry:
~~~
sudo chown `whoami` /dev/ttyUSB*
~~~
### TODO:
1. Carefully build comm port traffic into messages. Reject corrupted messages earlier in the chain.
2. Impliment "dark mode" in plot and UI elements.
3. Impliment band presets per the "Band" tab (currently does nothing)
4. Impliment STO and RCL buttons under Freq tab
5. Save settings to text file
6. Automatically poll transceiver and bandscope state on startup.
7. Change the delayedCommand so that it can accept a vector of queued commands. Or change the signal/slot paradigm to automatically queue requests.
8. Automatically query the Data Mode when we query the Mode. Also allow data mode setting.
9. Fix the indexes on the waterfall display. Currently we take the mouse coordinates and intrepret frequency from the bandscope plot.
10. Enable the band scope display in addition to the band scope serial data output.
1. Re-work pseudo term code into separate thread
2. Consider XML RPC to make flrig/fldigi interface easier
3. Add hide/show for SWR, ALC, Power, S-Meter interface