removing extra readme

README

@@ -1,48 +0,0 @@
-Wagtail demo project
-=======================
-
-This is a demonstration project for [Wagtail CMS](http://wagtail.io).
-
-*We do __not__ recommend using this project to start your own site*. This project is only to provide some examples of implementing common features, it is not an exemplar of Django or Wagtail best practice.
-
-If you're reasonably new to Python/Django, we suggest you run this project on a Virtual Machine using Vagrant, which helps  resolve common software dependency issues. However for more experienced developers, instructions to start this project without Vagrant follow below.
-
-Once you're familiar with the examples in this project and you want to start a real site, we strongly recommend running the ``wagtail start`` command in a fresh virtual environment, explained in the [Wagtail CMS Documentation](http://wagtail.readthedocs.org/en/latest/getting_started/).
-
-Setup with Vagrant
-------------------
-
-### Dependencies
-* [VirtualBox](https://www.virtualbox.org/)
-* [Vagrant 1.5+](http://www.vagrantup.com)
-
-### Installation
-Run the following commands:
-
-    git clone https://github.com/torchbox/bakerydemo.git
-    cd wagtaildemo
-    vagrant up
-    vagrant ssh
-      (then, within the SSH session:)
-    ./manage.py runserver 0.0.0.0:8000
-
-The demo site will now be accessible at [http://localhost:8000/](http://localhost:8000/) and the Wagtail admin interface at [http://localhost:8000/admin/](http://localhost:8000/admin/) . Log into the admin with the credentials ``admin / changeme``.
-
-Setup without Vagrant
------
-Don't want to set up a whole VM to try out Wagtail? No problem.
-
-### Dependencies
-* [PIP](https://github.com/pypa/pip)
-
-### Installation
-
-With PIP installed run the following commands:
-
-    git clone https://github.com/torchbox/bakerydemo.git
-    cd wagtaildemo
-    pip install -r requirements.txt
-    ./manage.py migrate
-    ./manage.py load_initial_data
-    ./manage.py createsuperuser
-    ./manage.py runserver

readme.md

@@ -1,2 +1,48 @@
-bakerydemo
-==================
+Wagtail demo project
+=======================
+
+This is a demonstration project for [Wagtail CMS](http://wagtail.io).
+
+*We do __not__ recommend using this project to start your own site*. This project is only to provide some examples of implementing common features, it is not an exemplar of Django or Wagtail best practice.
+
+If you're reasonably new to Python/Django, we suggest you run this project on a Virtual Machine using Vagrant, which helps  resolve common software dependency issues. However for more experienced developers, instructions to start this project without Vagrant follow below.
+
+Once you're familiar with the examples in this project and you want to start a real site, we strongly recommend running the ``wagtail start`` command in a fresh virtual environment, explained in the [Wagtail CMS Documentation](http://wagtail.readthedocs.org/en/latest/getting_started/).
+
+Setup with Vagrant
+------------------
+
+### Dependencies
+* [VirtualBox](https://www.virtualbox.org/)
+* [Vagrant 1.5+](http://www.vagrantup.com)
+
+### Installation
+Run the following commands:
+
+    git clone https://github.com/torchbox/bakerydemo.git
+    cd wagtaildemo
+    vagrant up
+    vagrant ssh
+      (then, within the SSH session:)
+    ./manage.py runserver 0.0.0.0:8000
+
+The demo site will now be accessible at [http://localhost:8000/](http://localhost:8000/) and the Wagtail admin interface at [http://localhost:8000/admin/](http://localhost:8000/admin/) . Log into the admin with the credentials ``admin / changeme``.
+
+Setup without Vagrant
+-----
+Don't want to set up a whole VM to try out Wagtail? No problem.
+
+### Dependencies
+* [PIP](https://github.com/pypa/pip)
+
+### Installation
+
+With PIP installed run the following commands:
+
+    git clone https://github.com/torchbox/bakerydemo.git
+    cd wagtaildemo
+    pip install -r requirements.txt
+    ./manage.py migrate
+    ./manage.py load_initial_data
+    ./manage.py createsuperuser
+    ./manage.py runserver