mirror
/
vp-digi
kopia lustrzana https://github.com/sq8vps/vp-digi
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Improve messaging 

Main change: say explicitly that the PWM command requires the "save" command to take effect, because I wasted so long trying to debug why it wasn't working.
pull/30/head
DeflateAwning 2023-09-10 22:43:32 -06:00
rodzic e9a5ebd2c6
commit 1923cefeec
1 zmienionych plików z 10 dodań i 10 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

20
Src/terminal.c
Wyświetl plik

@ -121,7 +121,7 @@ static const char configHelp[] = "\r\nCommands available in config mode:\r\n"
"txtail <10-2550> - sets TXTail time (ms)\r\n"
"quiet <100-2550> - sets quiet time (ms)\r\n"
"rs1baud/rs2baud <1200-115200> - sets UART1/UART2 baudrate\r\n"
"pwm [on/off] - enables/disables PWM. If PWM is off, R2R will be used instead\r\n"
"pwm [on/off] - enables/disables PWM. If PWM is off, R2R will be used instead. \"save\" command is required.\r\n"
"flat [on/off] - set to \"on\" if flat audio input is used\r\n"
"beacon <0-7> [on/off] - enables/disables specified beacon\r\n"
"beacon <0-7> [iv/dl] <0-720> - sets interval/delay for the specified beacon (min)\r\n"
@ -346,21 +346,21 @@ void TermParse(Uart *src)
*/
if(!strncmp(cmd, "kiss", 4))
{
UartSendString(src, (uint8_t*)"Switched to KISS mode\r\n", 0);
UartSendString(src, (uint8_t*)"Switched to KISS mode.\r\n", 0);
src->mode = MODE_KISS;
return;
}
else if(!strncmp(cmd, "config", 6))
{
UartSendString(src, (uint8_t*)"Switched to configuration mode\r\n"
UartSendString(src, (uint8_t*)"Switched to configuration mode.\r\n"
"Most settings will take effect immediately, but\r\n"
"remember to save the configuration using \"save\"\r\n", 0);
"remember to save the configuration using \"save\" for **all** settings to take effect.\r\n", 0);
src->mode = MODE_TERM;
return;
}
else if(!strncmp(cmd, "monitor", 7))
{
UartSendString(src, (uint8_t*)"Switched to monitor mode\r\n", 0);
UartSendString(src, (uint8_t*)"Switched to monitor mode.\r\n", 0);
src->mode = MODE_MONITOR;
return;
}
@ -413,29 +413,29 @@ void TermParse(Uart *src)
{
if(!strncmp(&cmd[4], "low", 3))
{
UartSendString(src, "Starting low tone calibration transmission\r\n", 0);
UartSendString(src, "Starting low tone calibration transmission.\r\n", 0);
ModemTxTestStart(TEST_MARK);
}
else if(!strncmp(&cmd[4], "high", 4))
{
UartSendString(src, "Starting high tone calibration transmission\r\n", 0);
UartSendString(src, "Starting high tone calibration transmission.\r\n", 0);
ModemTxTestStart(TEST_SPACE);
}
else if(!strncmp(&cmd[4], "alt", 3))
{
UartSendString(src, "Starting alternating tones calibration transmission\r\n", 0);
UartSendString(src, "Starting alternating tones calibration transmission.\r\n", 0);
ModemTxTestStart(TEST_ALTERNATING);
}
else if(!strncmp(&cmd[4], "stop", 4))
{
UartSendString(src, "Stopping calibration transmission\r\n", 0);
UartSendString(src, "Stopping calibration transmission.\r\n", 0);
ModemTxTestStop();
}
else
UartSendString(src, "Usage: cal {low|high|alt|stop}\r\n", 0);
}
else
UartSendString(src, "Unknown command. For command list type \"help\"\r\n", 0);
UartSendString(src, "Unknown command. For command list type \"help\".\r\n", 0);
return;
}