mirror
/
stlink
kopia lustrzana https://github.com/stlink-org/stlink
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
stlink/stlinkv1_macos_driver
Historia
nightwalker-87 4bfaab0ea9 Removed support for STLINK/v1 on macOS 10.13 2021-01-04 00:53:24 +01:00
..
stlink_shield_10_14.kext/Contents Removed support for STLINK/v1 on macOS 10.13 2021-01-04 00:53:24 +01:00
stlink_shield_10_15.kext/Contents Removed support for STLINK/v1 on macOS 10.13 2021-01-04 00:53:24 +01:00
stlink_shield_xcode Removed support for STLINK/v1 on macOS 10.13 2021-01-04 00:53:24 +01:00
Makefile Updated stlink-v1 driver for macOS 2020-05-26 13:58:56 +02:00
README.md Changed kext-path to /Library/Extensions 2020-05-28 11:42:26 +02:00
install.sh Removed support for STLINK/v1 on macOS 10.13 2021-01-04 00:53:24 +01:00

README.md

Installation instructions for STLINK/v1 driver

When connecting to the STLINK/v1 on macOS via USB, the system claims the programmer as a SCSI device. Thus libusb is not able to initialise and establish a connection to it. To solve this issue Marco Cassinerio (marco.cassinerio@gmail.com) has created a so called "codeless driver" which claims the device. It is of higher priority then the default apple mass storage driver, what allows the device to be accessed through libusb.

To make use of this alternative approach one needs to go through the following steps:

  1. Configure System Integrity Protection (SIP)

The above system security setting introduced by Apple with OS X El Capitan (10.11) in 2015 is active per default and prevents the operating system amongst other things to load unsigned Kernel Extension Modules (kext). Thus the STLINK/v1 driver supplied with the tools, which installs as a kext, remains not functional, until SIP is fully deactivated. Without SIP-deactivation, st-util would fail to detect a STLINK/v1 device later on.

In order to deactivate SIP, boot into the recovery mode and run csrutil disable in a terminal console window.

  1. Reboot the system.

  2. Install the macOS Kernel Extension (kext) (ST-Link-v1 driver):

  • Open a terminal console and navigate to this subdirectory /stlinkv1_macos_driver
  • Use the command sudo sh ./install.sh to install the appropiate kext for your system version. This should result in the following output:
Requesting load of /Library/Extensions/stlink_shield.kext.
/Library/Extensions/stlink_shield.kext loaded successfully (or already loaded).

  1. Reboot the system.

  2. Verify correct detection of the STLINK/v1 device with the following input: st-util -1 You should then see a similar output like in this example:

INFO common.c: Loading device parameters....
INFO common.c: Device connected is: F1 High-density device, id 0x10036414
INFO common.c: SRAM size: 0x10000 bytes (64 KiB), Flash: 0x80000 bytes (512 KiB) in pages of 2048 bytes
INFO sg.c: Successfully opened a stlink v1 debugger
INFO gdb-server.c: Chip ID is 00000414, Core ID is  1ba01477.
INFO gdb-server.c: Listening at *:4242...