kopia lustrzana https://github.com/stlink-org/stlink
399 wiersze
16 KiB
Plaintext
399 wiersze
16 KiB
Plaintext
|
|
=== Target Identification ===
|
|
|
|
The following information is available about the target:
|
|
- chip id: 0xE0042000 or 0x40015800, primary information to derive flash and sram architection
|
|
- core id: Result from the STLINK_DEBUGREADCOREID call, additionally used for flash/sram architection
|
|
- cpu id: 0xE000ED00 (CMSIS System Control Block CPU ID), not used in stlink
|
|
|
|
|
|
=== Backend ===
|
|
|
|
The "backend" implements the interface to the adapter hardware.
|
|
There are two backends for two different adapters: "sg" (stlink v1?) and "usb" (stlink v2?).
|
|
|
|
|
|
|
|
Include stlink/backend.h
|
|
typedef struct _stlink_backend {
|
|
void (*close) (stlink_t * sl);
|
|
int (*exit_debug_mode) (stlink_t * sl);
|
|
int (*enter_swd_mode) (stlink_t * sl);
|
|
int (*enter_jtag_mode) (stlink_t * stl);
|
|
int (*exit_dfu_mode) (stlink_t * stl);
|
|
int (*core_id) (stlink_t * stl);
|
|
int (*reset) (stlink_t * stl);
|
|
int (*jtag_reset) (stlink_t * stl, int value);
|
|
int (*run) (stlink_t * stl);
|
|
int (*status) (stlink_t * stl);
|
|
int (*version) (stlink_t *sl);
|
|
int (*read_debug32) (stlink_t *sl, uint32_t addr, uint32_t *data);
|
|
int (*read_mem32) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int (*write_debug32) (stlink_t *sl, uint32_t addr, uint32_t data);
|
|
int (*write_mem32) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int (*write_mem8) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int (*read_all_regs) (stlink_t *sl, struct stlink_reg * regp);
|
|
int (*read_reg) (stlink_t *sl, int r_idx, struct stlink_reg * regp);
|
|
int (*read_all_unsupported_regs) (stlink_t *sl, struct stlink_reg *regp);
|
|
int (*read_unsupported_reg) (stlink_t *sl, int r_idx, struct stlink_reg *regp);
|
|
int (*write_unsupported_reg) (stlink_t *sl, uint32_t value, int idx, struct stlink_reg *regp);
|
|
int (*write_reg) (stlink_t *sl, uint32_t reg, int idx);
|
|
int (*step) (stlink_t * stl);
|
|
int (*current_mode) (stlink_t * stl);
|
|
int (*force_debug) (stlink_t *sl);
|
|
int32_t (*target_voltage) (stlink_t *sl);
|
|
int (*set_swdclk) (stlink_t * stl, uint16_t divisor);
|
|
} stlink_backend_t;
|
|
|
|
Descriptions below describe the actions of the usb.h backend:
|
|
|
|
void (*close) (stlink_t * sl);
|
|
int (*exit_debug_mode) (stlink_t * sl);
|
|
__stlink_usb_exit_debug_mode: Send STLINK_DEBUG_EXIT
|
|
returns -1 or 0
|
|
|
|
int (*enter_swd_mode) (stlink_t * sl);
|
|
_stlink_usb_enter_swd_mode: Send STLINK_DEBUG_ENTER+STLINK_DEBUG_ENTER_SWD
|
|
returns -1 or 0
|
|
|
|
int (*enter_jtag_mode) (stlink_t * stl);
|
|
|
|
int (*exit_dfu_mode) (stlink_t * stl);
|
|
_stlink_usb_exit_dfu_mode: Send STLINK_DFU_EXIT
|
|
returns -1 or 0
|
|
|
|
int (*core_id) (stlink_t * stl);
|
|
_stlink_usb_core_id: Assign the result from STLINK_DEBUG_READCOREID to stl->core_id
|
|
returns -1 or 0
|
|
|
|
int (*reset) (stlink_t * stl);
|
|
_stlink_usb_reset: Send STLINK_DEBUG_RESETSYS and reset via AIRCR
|
|
AIRCR is part of the CMSIS System Control Block (SCB), which is located in
|
|
the System Control Space at 0xE000ED0C
|
|
returns -1 or 0 ?
|
|
|
|
int (*jtag_reset) (stlink_t * stl, int value);
|
|
_stlink_usb_jtag_reset: Send STLINK_JTAG_DRIVE_NRST.
|
|
"value" is sent as argument for STLINK_JTAG_DRIVE_NRST and probably contains
|
|
the status of the NRST line (0: low, 1: high). Also the value 2 is used in the software.
|
|
returns -1 or 0
|
|
|
|
int (*run) (stlink_t * stl);
|
|
_stlink_usb_run: Send STLINK_DEBUG_RUNCORE
|
|
returns -1 or 0
|
|
|
|
int (*status) (stlink_t * stl);
|
|
_stlink_usb_status: Assign the result from STLINK_DEBUG_GETSTATUS to stl->q_len
|
|
returns -1 or 0
|
|
|
|
int (*version) (stlink_t *sl);
|
|
_stlink_usb_version: Read version with STLINK_GET_VERSION.
|
|
Result is stored in sl->q_buf (6 bytes????)
|
|
returns -1 or 0
|
|
|
|
int (*read_debug32) (stlink_t *sl, uint32_t addr, uint32_t *data);
|
|
_stlink_usb_read_debug32: Send STLINK_JTAG_READDEBUG_32BIT
|
|
to read 32 bits from "addr". The result data is stored at "*data".
|
|
returns -1 or 0
|
|
|
|
int (*read_mem32) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
_stlink_usb_read_mem32: Use STLINK_DEBUG_READMEM_32BIT
|
|
to read "len" bytes from "addr"
|
|
Result is returned in sl->q_buf, sl->q_len returns the size of the data (should be
|
|
equal to "len"???).
|
|
returns -1 or 0
|
|
|
|
int (*write_debug32) (stlink_t *sl, uint32_t addr, uint32_t data);
|
|
_stlink_usb_write_debug32: Use STLINK_JTAG_WRITEDEBUG_32BIT
|
|
to store "data" at "addr"
|
|
returns -1 or 0
|
|
|
|
int (*write_mem32) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
_stlink_usb_write_mem32: Use STLINK_DEBUG_WRITEMEM_32BIT to
|
|
send data stored in sl->q_buf to the target at "addr".
|
|
"len" is the size data (???? not clear whether this are bytes )
|
|
returns -1 or 0
|
|
|
|
int (*write_mem8) (stlink_t *sl, uint32_t addr, uint16_t len);
|
|
_stlink_usb_write_mem8: Use STLINK_DEBUG_WRITEMEM_8BIT to
|
|
send data stored in sl->q_buf to the target at "addr".
|
|
"len" is the size in bytes (probably).
|
|
returns -1 or 0
|
|
|
|
int (*read_all_regs) (stlink_t *sl, struct stlink_reg * regp);
|
|
_stlink_usb_read_all_regs: Send STLINK_DEBUG_READALLREGS to read
|
|
all register values and store them into *regp;
|
|
returns -1 or 0
|
|
|
|
int (*read_reg) (stlink_t *sl, int r_idx, struct stlink_reg * regp);
|
|
_stlink_usb_read_reg: Send STLINK_DEBUG_READREG to read specific register "r_idx".
|
|
The result is then stored in *regp in the correct register.
|
|
Example if "r_idx" is 18, then the result is stored in regp->process_sp
|
|
returns -1 or 0
|
|
|
|
int (*read_all_unsupported_regs) (stlink_t *sl, struct stlink_reg *regp);
|
|
_stlink_usb_read_all_unsupported_regs: Calls "_stlink_usb_read_unsupported_reg"
|
|
(see below) to read all registers.
|
|
returns -1 or 0
|
|
|
|
int (*read_unsupported_reg) (stlink_t *sl, int r_idx, struct stlink_reg *regp);
|
|
_stlink_usb_read_unsupported_reg Use DCRSR and DCRDR to access some
|
|
of the internal registers (primask, basepri, faultmask, control, fpscr).
|
|
Also will fill regp->s (???) for some specific "r_idx" values.
|
|
WARNING: Some r_idx values may lead to a out of array bound problem in C.
|
|
returns -1 or 0
|
|
|
|
int (*write_unsupported_reg) (stlink_t *sl, uint32_t value, int idx, struct stlink_reg *regp);
|
|
_stlink_usb_write_unsupported_reg:
|
|
Updates one of the following registers:
|
|
primask (idx=0x1c), basepri (idx=0x1d), faultmask (idx=0x1e), control (idx=0x1f)
|
|
The new value is given as "value" as fn argument.
|
|
Corresponding values are refreshed in regp, however the old value for is kept in regp:
|
|
If basepri has to be updated (idx=0x1d), then all register values are fetched and
|
|
basepri is updated in the core, but not in *regp (BUG???).
|
|
returns -1 or 0
|
|
|
|
int (*write_reg) (stlink_t *sl, uint32_t reg, int idx);
|
|
_stlink_usb_write_reg: Use STLINK_DEBUG_WRITEREG to update register "idx"
|
|
with value "reg".
|
|
returns -1 or 0
|
|
|
|
int (*step) (stlink_t * stl);
|
|
_stlink_usb_step: Send STLINK_DEBUG_STEPCORE
|
|
returns -1 or 0
|
|
|
|
int (*current_mode) (stlink_t * stl);
|
|
_stlink_usb_current_mode: Send STLINK_GET_CURRENT_MODE and return
|
|
the current mode.
|
|
returns -1 or the value for the current mode.
|
|
Modes probably are:
|
|
STLINK_DEV_DFU_MODE 0x00
|
|
STLINK_DEV_MASS_MODE 0x01
|
|
STLINK_DEV_DEBUG_MODE 0x02
|
|
|
|
int (*force_debug) (stlink_t *sl);
|
|
_stlink_usb_force_debug: Sends STLINK_DEBUG_FORCEDEBUG. No other side effects
|
|
returns -1 or 0
|
|
|
|
int32_t (*target_voltage) (stlink_t *sl);
|
|
_stlink_usb_target_voltage: Send STLINK_GET_TARGET_VOLTAGE
|
|
returns -1 or the target voltage. (??? dimension is not clear...)
|
|
|
|
int (*set_swdclk) (stlink_t * stl, uint16_t divisor);
|
|
_stlink_usb_set_swdclk: Send STLINK_DEBUG_APIV2_SWD_SET_FREQ and "divisor" value
|
|
returns -1 or 0
|
|
|
|
|
|
=== Other Functions ===
|
|
|
|
|
|
Include: stlink.h
|
|
|
|
|
|
Prototype: void stlink_close(stlink_t *sl);
|
|
Include: inc/stlink.h
|
|
Definition: src/common.c
|
|
Description:
|
|
Calls the backend "close" procedure and frees 'sl'
|
|
Backend: "close"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_core_id(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
Calls the backend "core_id", calls stlink_print_data() on higher verbose levels.
|
|
Assigns the core id returned by STLINK_DEBUGREADCOREID to sl->core_id
|
|
Only some specific core ids are used: See include/stm32.h
|
|
Usage includes the selection of the correct flash algorithm.
|
|
Backend: "core_id"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_reset(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
Just calls the backend "reset" procedure (reset via STLINK_DEBUG_RESETSYS
|
|
and reset via AIRCR register at 0xE000ED0C)
|
|
Backend: "reset"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_jtag_reset(stlink_t *sl, int value);
|
|
Definition: src/common.c
|
|
Description:
|
|
Just calls the backend "jtag_reset" procedure
|
|
Backend: "jtag_reset"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
value: 0: drive low, 1: drive high, 2: ????
|
|
Return: -1 for error. 0 for success.
|
|
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_run(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
Just calls the backend "run" procedure.
|
|
Backend: "run"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_status(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
Calls the backend "status" procedure and the procedure "stlink_core_stat()" to
|
|
store the status in "sl->core_stat". Possible value for "sl->core_stat" are:
|
|
STLINK_CORE_RUNNING
|
|
STLINK_CORE_HALTED
|
|
STLINK_CORE_STAT_UNKNOWN
|
|
Backend: "status"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_version(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
Calls the backend "version" procedure, parses the result and puts the result into sl->version
|
|
This version probably refers to the version of the adapter.
|
|
Backend: "version"
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
|
|
int stlink_read_debug32(stlink_t *sl, uint32_t addr, uint32_t *data);
|
|
int stlink_read_mem32(stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int stlink_write_debug32(stlink_t *sl, uint32_t addr, uint32_t data);
|
|
int stlink_write_mem32(stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int stlink_write_mem8(stlink_t *sl, uint32_t addr, uint16_t len);
|
|
int stlink_read_all_regs(stlink_t *sl, struct stlink_reg *regp);
|
|
int stlink_read_all_unsupported_regs(stlink_t *sl, struct stlink_reg *regp);
|
|
int stlink_read_reg(stlink_t *sl, int r_idx, struct stlink_reg *regp);
|
|
int stlink_read_unsupported_reg(stlink_t *sl, int r_idx, struct stlink_reg *regp);
|
|
int stlink_write_unsupported_reg(stlink_t *sl, uint32_t value, int r_idx, struct stlink_reg *regp);
|
|
int stlink_write_reg(stlink_t *sl, uint32_t reg, int idx);
|
|
int stlink_step(stlink_t *sl);
|
|
int stlink_current_mode(stlink_t *sl);
|
|
int stlink_force_debug(stlink_t *sl);
|
|
int stlink_target_voltage(stlink_t *sl);
|
|
int stlink_set_swdclk(stlink_t *sl, uint16_t divisor);
|
|
|
|
int stlink_erase_flash_mass(stlink_t* sl);
|
|
int stlink_write_flash(stlink_t* sl, stm32_addr_t address, uint8_t* data, uint32_t length, uint8_t eraseonly);
|
|
int stlink_parse_ihex(const char* path, uint8_t erased_pattern, uint8_t * * mem, size_t * size, uint32_t * begin);
|
|
uint8_t stlink_get_erased_pattern(stlink_t *sl);
|
|
int stlink_mwrite_flash(stlink_t *sl, uint8_t* data, uint32_t length, stm32_addr_t addr);
|
|
int stlink_fwrite_flash(stlink_t *sl, const char* path, stm32_addr_t addr);
|
|
int stlink_fwrite_option_bytes(stlink_t *sl, const char* path, stm32_addr_t addr);
|
|
int stlink_fwrite_option_bytes_32bit(stlink_t *sl,uint32_t val);
|
|
int stlink_mwrite_sram(stlink_t *sl, uint8_t* data, uint32_t length, stm32_addr_t addr);
|
|
int stlink_fwrite_sram(stlink_t *sl, const char* path, stm32_addr_t addr);
|
|
int stlink_verify_write_flash(stlink_t *sl, stm32_addr_t address, uint8_t *data, uint32_t length);
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_chip_id(stlink_t *sl, uint32_t *chip_id);
|
|
Definition: src/common.c
|
|
Description:
|
|
Tries to read out the chip id via memory read from the device.
|
|
Note: sl->chip_id is NOT updated by this procedure. Instead this happens in stlink_load_device_params():
|
|
Do not call this function, but instead call stlink_load_device_params()
|
|
Backend: -
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
chip_id: Pointer. Result is stored via this pointer.
|
|
Return: -1 for error. 0 for success.
|
|
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_cpu_id(stlink_t *sl, cortex_m3_cpuid_t *cpuid);
|
|
Definition: src/common.c
|
|
Description:
|
|
Reads the CPU id from STLINK_REG_CM3_CPUID (0xE000ED00, first value of
|
|
the SCB, system control block) and splits this into
|
|
cpuid->implementer_id
|
|
cpuid->variant
|
|
cpuid->part
|
|
cpuid->revision
|
|
The result is not used in the tools, but only in the usb test program.
|
|
Backend: -
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
cpuid: Pointer. Result is stored via this pointer.
|
|
Return: -1 for error. 0 for success.
|
|
|
|
|
|
|
|
|
|
int stlink_erase_flash_page(stlink_t* sl, stm32_addr_t flashaddr);
|
|
uint32_t stlink_calculate_pagesize(stlink_t *sl, uint32_t flashaddr);
|
|
uint16_t read_uint16(const unsigned char *c, const int pt);
|
|
void stlink_core_stat(stlink_t *sl);
|
|
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: void stlink_print_data(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
If debug logging is enabled: Print the HEX content of the q_buf array.
|
|
q_buf will contain the result of the last "backend" command.
|
|
Backend: -
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -
|
|
|
|
|
|
unsigned int is_bigendian(void);
|
|
uint32_t read_uint32(const unsigned char *c, const int pt);
|
|
void write_uint32(unsigned char* buf, uint32_t ui);
|
|
void write_uint16(unsigned char* buf, uint16_t ui);
|
|
bool stlink_is_core_halted(stlink_t *sl);
|
|
int write_buffer_to_sram(stlink_t *sl, flash_loader_t* fl, const uint8_t* buf, size_t size);
|
|
int write_loader_to_sram(stlink_t *sl, stm32_addr_t* addr, size_t* size);
|
|
int stlink_fread(stlink_t* sl, const char* path, bool is_ihex, stm32_addr_t addr, size_t size);
|
|
|
|
|
|
Include: inc/stlink.h
|
|
Prototype: int stlink_load_device_params(stlink_t *sl);
|
|
Definition: src/common.c
|
|
Description:
|
|
This is one of the most important procedures. It will get all the device info
|
|
and store the results in the "sl" structure. Many other procedures will depend
|
|
on this information.
|
|
The identification is based on the stlink_chip_id() result and the flash_size register value
|
|
Backend: -
|
|
Arguments:
|
|
sl: Pointer to the stlink data structure, returned by stlink_v1_open() or stlink_open_usb()
|
|
Return: -1 for error. 0 for success.
|
|
|
|
int stlink_read_option_bytes_f2(stlink_t *sl, uint32_t* option_byte);
|
|
int stlink_read_option_bytes_f4(stlink_t *sl, uint32_t* option_byte);
|
|
|
|
|
|
Include "flash_loader.h"
|
|
|
|
int stlink_flash_loader_init(stlink_t *sl, flash_loader_t* fl);
|
|
int stlink_flash_loader_write_to_sram(stlink_t *sl, stm32_addr_t* addr, size_t* size);
|
|
int stlink_flash_loader_run(stlink_t *sl, flash_loader_t* fl, stm32_addr_t target, const uint8_t* buf, size_t size);
|
|
|
|
|
|
Inlcude "sg.h"
|
|
stlink_t* stlink_v1_open(const int verbose, int reset);
|
|
|
|
Include "usb.h"
|
|
|
|
stlink_t *stlink_open_usb(enum ugly_loglevel verbose, bool reset, char serial[STLINK_SERIAL_MAX_SIZE]);
|
|
size_t stlink_probe_usb(stlink_t **stdevs[]);
|
|
void stlink_probe_usb_free(stlink_t **stdevs[], size_t size);
|