stlink/stlinkv1_macosx_driver
Bjoern ae562bd41a Update README 2014-10-14 21:01:41 +02:00
..
Makefile
README Update README 2014-10-14 21:01:41 +02:00
osx.tar.gz add kernelextension for OS X 10.10 Yosemite 2014-10-14 20:58:11 +02:00

README

from: marco.cassinerio@gmail.com
to: texane@gmail.com

Hi,

i managed to get the stlink v1 working under os x and i would like to share the solution so maybe you can
add it in your package.
The problem is that os x claims the device as scsi and libusb won't be able to connect to it.
I've created what is called a codeless driver which claims the device and has a higher priority then the
default apple mass storage driver, so the device can be accessed through libusb.

I tested this codeless driver under OS X 10.6.8 and 10.7.2. I assume it works with any 10.6.x and 10.7.x
version as well.

Attached to this mail you'll find the osx folder with the source code of the driver, both drivers (for
10.6.x and 10.7.x), an install.sh script and the modified Makefile, i only added a line at the end which
invoke the install.sh.

First, unpack the osx.tar.gz contents:
tar xzvf osx.tar.gz

Then, install the driver using:
sudo make osx_stlink_shield

no reboot required.

P.S. If error `OS X version not supported` occurs. For the latest versions of Mac OS X you may need to change the `osx/install.sh` as follows:
```
< ISOSXLION=$(sw_vers -productVersion)
---
> ISOSXLION=$(sw_vers -productVersion | sed -e 's:.[[:digit:]]*$::')
```
FOR OS X 10.10 Yosemite you must force the system to load unsigned kernelextensions

sudo nvram boot-args="kext-dev-mode=1“

reboot the system!