mirror
/
stlink
kopia lustrzana https://github.com/stlink-org/stlink
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

doc: update doc to mention STLINK_DEVICE and --probe parameters if 

applicable in all man files
pull/934/head
Guillaume Revaillot 2020-04-22 10:57:45 +02:00
rodzic 15f1c81b08
commit ad0e52540e
4 zmienionych plików z 10 dodań i 5 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

3
doc/man/st-flash.md
Wyświetl plik

@ -20,6 +20,9 @@ You can use this instead of st-util(1) if you prefer, but remember to use the
Use hexadecimal format for the *ADDR* and *SIZE*. Use hexadecimal format for the *ADDR* and *SIZE*.
The STLink device to use can be specified using the --serial parameter, or via
the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
# COMMANDS # COMMANDS
write *FILE* *ADDR* write *FILE* *ADDR*

3
doc/man/st-info.md
Wyświetl plik

@ -11,9 +11,12 @@ st-info - Provides information about connected STLink and STM32 devices
# DESCRIPTION # DESCRIPTION
Provides information about connected STLink programmers and STM32 devices: Provides information about connected STLink programmers and STM32 devices:
Serial code, OpenOCD hla-serial, flash, page size, sram, chipid, description. Serial code, OpenOCD hla-serial, flash, page size, sram, chipid, description.
The STLink device to probe can be specified via the environment variable
STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
# OPTIONS # OPTIONS

5
doc/man/st-util.md
Wyświetl plik

@ -18,9 +18,8 @@ If a port number is not specified using the **--listen_port** option, the
default **4242** port will be used. default **4242** port will be used.
Stlink version 2 is used by default unless the option **--stlinkv1** is given. Stlink version 2 is used by default unless the option **--stlinkv1** is given.
The STLink device to use can be specified using the --serial parameter, or via
The STLinkV2 device to use can be specified in the environment the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
# OPTIONS # OPTIONS

4
doc/tutorial.md
Wyświetl plik

@ -285,8 +285,8 @@ There are a few options:
Do not reset board on connection. Do not reset board on connection.
``` ```
The STLINKv2 device to use can be specified in the environment The STLink device to use can be specified using the --serial parameter, or via
variable `STLINK_DEVICE` in the format `<USB_BUS>:<USB_ADDR>`. the environment variable STLINK_DEVICE on the format <USB_BUS>:<USB_ADDR>.
Then, in your project directory, someting like this... Then, in your project directory, someting like this...
(remember, you need to run an _ARM_ gdb, not an x86 gdb) (remember, you need to run an _ARM_ gdb, not an x86 gdb)