// Copyright 2019 SoloKeys Developers
//
// Licensed under the Apache License, Version 2.0, <LICENSE-APACHE or
// http://apache.org/licenses/LICENSE-2.0> or the MIT license <LICENSE-MIT or
// http://opensource.org/licenses/MIT>, at your option. This file may not be
// copied, modified, or distributed except according to those terms.
#ifndef _APP_H_
#define _APP_H_
#include <stdint.h>

#define DEBUG_UART      USART1

#ifndef DEBUG_LEVEL
#define DEBUG_LEVEL     0
#endif

#define NON_BLOCK_PRINTING 0


#define BOOT_TO_DFU         0

//#define USING_DEV_BOARD

//#define ENABLE_U2F_EXTENSIONS

#define ENABLE_U2F

// #define DISABLE_CTAPHID_PING
// #define DISABLE_CTAPHID_WINK
// #define DISABLE_CTAPHID_CBOR

void printing_init();
void hw_init(void);

//#define TEST
//#define TEST_POWER

//                              0xRRGGBB
#define LED_INIT_VALUE			0x000800
#define LED_WINK_VALUE			0x000010
#define LED_MAX_SCALER          15
#define LED_MIN_SCALER          1
// # of ms between each change in LED
#define HEARTBEAT_PERIOD        150
// Each LED channel will be multiplied by a integer between LED_MAX_SCALER
// and LED_MIN_SCALER to cause the slow pulse.  E.g.
// #define LED_INIT_VALUE			0x301000
// #define LED_MAX_SCALER          30
// #define LED_MIN_SCALER          1
// #define HEARTBEAT_PERIOD        8
// Will pulse from 0x301000 to 0x903000 to 0x301000 ...
// Which will take ~8 * (30)*2 ms

// Button
#define SOLO_BUTTON_PORT        GPIOA
#define SOLO_BUTTON_PIN         LL_GPIO_PIN_0

#define SKIP_BUTTON_CHECK_WITH_DELAY        0
#define SKIP_BUTTON_CHECK_FAST              0

#endif