mirror
/
sdrangel
kopia lustrzana https://github.com/f4exb/sdrangel
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sdrangel/plugins/samplesource/bladerf2input/bladerf2input.cpp

1074 wiersze
40 KiB
C++
Czysty Wina Historia

///////////////////////////////////////////////////////////////////////////////////
// Copyright (C) 2018 Edouard Griffiths, F4EXB //
// //
// This program is free software; you can redistribute it and/or modify //
// it under the terms of the GNU General Public License as published by //
// the Free Software Foundation as version 3 of the License, or //
// //
// This program is distributed in the hope that it will be useful, //
// but WITHOUT ANY WARRANTY; without even the implied warranty of //
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the //
// GNU General Public License V3 for more details. //
// //
// You should have received a copy of the GNU General Public License //
// along with this program. If not, see <http://www.gnu.org/licenses/>. //
///////////////////////////////////////////////////////////////////////////////////
#include <QDebug>
#include "libbladeRF.h"
#include "SWGDeviceSettings.h"
#include "SWGBladeRF2InputSettings.h"
#include "SWGDeviceState.h"
#include "SWGDeviceReport.h"
#include "SWGBladeRF2InputReport.h"
#include "device/devicesourceapi.h"
#include "device/devicesinkapi.h"
#include "dsp/dspcommands.h"
#include "dsp/filerecord.h"
#include "dsp/dspengine.h"
#include "bladerf2/devicebladerf2shared.h"
#include "bladerf2/devicebladerf2.h"
#include "bladerf2inputthread.h"
#include "bladerf2input.h"
MESSAGE_CLASS_DEFINITION(BladeRF2Input::MsgConfigureBladeRF2, Message)
MESSAGE_CLASS_DEFINITION(BladeRF2Input::MsgFileRecord, Message)
MESSAGE_CLASS_DEFINITION(BladeRF2Input::MsgStartStop, Message)
MESSAGE_CLASS_DEFINITION(BladeRF2Input::MsgReportGainRange, Message)
BladeRF2Input::BladeRF2Input(DeviceSourceAPI *deviceAPI) :
m_deviceAPI(deviceAPI),
m_settings(),
m_deviceDescription("BladeRF2Input"),
m_running(false),
m_thread(0)
{
openDevice();
if (m_deviceShared.m_dev)
{
const bladerf_gain_modes *modes = 0;
int nbModes = m_deviceShared.m_dev->getGainModesRx(&modes);
if (modes)
{
for (int i = 0; i < nbModes; i++) {
m_gainModes.push_back(GainMode{QString(modes[i].name), modes[i].mode});
}
}
}
m_fileSink = new FileRecord(QString("test_%1.sdriq").arg(m_deviceAPI->getDeviceUID()));
m_deviceAPI->addSink(m_fileSink);
}
BladeRF2Input::~BladeRF2Input()
{
if (m_running) {
stop();
}
m_deviceAPI->removeSink(m_fileSink);
delete m_fileSink;
closeDevice();
}
void BladeRF2Input::destroy()
{
delete this;
}
bool BladeRF2Input::openDevice()
{
if (!m_sampleFifo.setSize(96000 * 4))
{
qCritical("BladeRF2Input::openDevice: could not allocate SampleFifo");
return false;
}
else
{
qDebug("BladeRF2Input::openDevice: allocated SampleFifo");
}
// look for Rx buddies and get reference to the device object
// if there is a channel left take the first available
if (m_deviceAPI->getSourceBuddies().size() > 0) // look source sibling first
{
qDebug("BladeRF2Input::openDevice: look in Rx buddies");
DeviceSourceAPI *sourceBuddy = m_deviceAPI->getSourceBuddies()[0];
DeviceBladeRF2Shared *deviceBladeRF2Shared = (DeviceBladeRF2Shared*) sourceBuddy->getBuddySharedPtr();
if (deviceBladeRF2Shared == 0)
{
qCritical("BladeRF2Input::openDevice: the source buddy shared pointer is null");
return false;
}
DeviceBladeRF2 *device = deviceBladeRF2Shared->m_dev;
if (device == 0)
{
qCritical("BladeRF2Input::openDevice: cannot get device pointer from Rx buddy");
return false;
}
m_deviceShared.m_dev = device;
}
// look for Tx buddies and get reference to the device object
// allocate the Rx channel unconditionally
else if (m_deviceAPI->getSinkBuddies().size() > 0) // then sink
{
qDebug("BladeRF2Input::openDevice: look in Tx buddies");
DeviceSinkAPI *sinkBuddy = m_deviceAPI->getSinkBuddies()[0];
DeviceBladeRF2Shared *deviceBladeRF2Shared = (DeviceBladeRF2Shared*) sinkBuddy->getBuddySharedPtr();
if (deviceBladeRF2Shared == 0)
{
qCritical("BladeRF2Input::openDevice: the sink buddy shared pointer is null");
return false;
}
DeviceBladeRF2 *device = deviceBladeRF2Shared->m_dev;
if (device == 0)
{
qCritical("BladeRF2Input::openDevice: cannot get device pointer from Rx buddy");
return false;
}
m_deviceShared.m_dev = device;
}
// There are no buddies then create the first BladeRF2 device
// allocate the Rx channel unconditionally
else
{
qDebug("BladeRF2Input::openDevice: open device here");
m_deviceShared.m_dev = new DeviceBladeRF2();
char serial[256];
strcpy(serial, qPrintable(m_deviceAPI->getSampleSourceSerial()));
if (!m_deviceShared.m_dev->open(serial))
{
qCritical("BladeRF2Input::openDevice: cannot open BladeRF2 device");
return false;
}
}
m_deviceShared.m_channel = m_deviceAPI->getItemIndex(); // publicly allocate channel
m_deviceShared.m_source = this;
m_deviceAPI->setBuddySharedPtr(&m_deviceShared); // propagate common parameters to API
return true;
}
void BladeRF2Input::closeDevice()
{
if (m_deviceShared.m_dev == 0) { // was never open
return;
}
if (m_running) {
stop();
}
if (m_thread) { // stills own the thread => transfer to a buddy
moveThreadToBuddy();
}
m_deviceShared.m_channel = -1; // publicly release channel
m_deviceShared.m_source = 0;
// No buddies so effectively close the device
if ((m_deviceAPI->getSinkBuddies().size() == 0) && (m_deviceAPI->getSourceBuddies().size() == 0))
{
m_deviceShared.m_dev->close();
delete m_deviceShared.m_dev;
m_deviceShared.m_dev = 0;
}
}
void BladeRF2Input::init()
{
applySettings(m_settings, true);
}
BladeRF2InputThread *BladeRF2Input::findThread()
{
if (m_thread == 0) // this does not own the thread
{
BladeRF2InputThread *bladerf2InputThread = 0;
// find a buddy that has allocated the thread
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator it = sourceBuddies.begin();
for (; it != sourceBuddies.end(); ++it)
{
BladeRF2Input *buddySource = ((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_source;
if (buddySource)
{
bladerf2InputThread = buddySource->getThread();
if (bladerf2InputThread) {
break;
}
}
}
return bladerf2InputThread;
}
else
{
return m_thread; // own thread
}
}
void BladeRF2Input::moveThreadToBuddy()
{
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator it = sourceBuddies.begin();
for (; it != sourceBuddies.end(); ++it)
{
BladeRF2Input *buddySource = ((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_source;
if (buddySource)
{
buddySource->setThread(m_thread);
m_thread = 0; // zero for others
}
}
}
bool BladeRF2Input::start()
{
// There is a single thread per physical device (Rx side). This thread is unique and referenced by a unique
// buddy in the group of source buddies associated with this physical device.
//
// This start method is responsible for managing the thread and channel enabling when the streaming of a Rx channel is started
//
// It checks the following conditions
// - the thread is allocated or not (by itself or one of its buddies). If it is it grabs the thread pointer.
// - the requested channel is the first (0) or the following (just 1 in BladeRF 2 case)
//
// The BladeRF support library lets you work in two possible modes:
// - Single Input (SI) with only one channel streaming. This HAS to be channel 0.
// - Multiple Input (MI) with two channels streaming using interleaved samples. It MUST be in this configuration if channel 1
// is used irrespective of what you actually do with samples coming from channel 0. When we will run with only channel 1
// streaming from the client perspective the channel 0 will actually be enabled and streaming but its samples will
// just be disregarded.
//
// It manages the transition form SI where only one channel (the first or channel 0) should be running to the
// Multiple Input (MI) if the requested channel is 1. More generally it checks if the requested channel is within the current
// channel range allocated in the thread or past it. To perform the transition it stops the thread, deletes it and creates a new one.
// It marks the thread as needing start.
//
// If the requested channel is within the thread channel range (this thread being already allocated) it simply removes its FIFO reference
// so that the samples are not fed to the FIFO anymore and leaves the thread unchanged (no stop, no delete/new)
//
// If there is no thread allocated it creates a new one with a number of channels that fits the requested channel. That is
// 1 if channel 0 is requested (SI mode) and 2 if channel 1 is requested (MI mode). It marks the thread as needing start.
//
// Eventually it registers the FIFO in the thread. If the thread has to be started it enables the channels up to the number of channels
// allocated in the thread and starts the thread.
if (!m_deviceShared.m_dev)
{
qDebug("BladerfInput::start: no device object");
return false;
}
int requestedChannel = m_deviceAPI->getItemIndex();
BladeRF2InputThread *bladerf2InputThread = findThread();
bool needsStart = false;
if (bladerf2InputThread) // if thread is already allocated
{
qDebug("BladerfInput::start: thread is already allocated");
int nbOriginalChannels = bladerf2InputThread->getNbChannels();
if (requestedChannel+1 > nbOriginalChannels) // expansion by deleting and re-creating the thread
{
qDebug("BladerfInput::start: expand channels. Re-allocate thread and take ownership");
SampleSinkFifo **fifos = new SampleSinkFifo*[nbOriginalChannels];
unsigned int *log2Decims = new unsigned int[nbOriginalChannels];
int *fcPoss = new int[nbOriginalChannels];
for (int i = 0; i < nbOriginalChannels; i++) // save original FIFO references and data
{
fifos[i] = bladerf2InputThread->getFifo(i);
log2Decims[i] = bladerf2InputThread->getLog2Decimation(i);
fcPoss[i] = bladerf2InputThread->getFcPos(i);
}
bladerf2InputThread->stopWork();
delete bladerf2InputThread;
bladerf2InputThread = new BladeRF2InputThread(m_deviceShared.m_dev->getDev(), requestedChannel+1);
m_thread = bladerf2InputThread; // take ownership
for (int i = 0; i < nbOriginalChannels; i++) // restore original FIFO references
{
bladerf2InputThread->setFifo(i, fifos[i]);
bladerf2InputThread->setLog2Decimation(i, log2Decims[i]);
bladerf2InputThread->setFcPos(i, fcPoss[i]);
}
// remove old thread address from buddies (reset in all buddies)
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator it = sourceBuddies.begin();
for (; it != sourceBuddies.end(); ++it) {
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_source->setThread(0);
}
needsStart = true;
}
else
{
qDebug("BladerfInput::start: keep buddy thread");
}
}
else // first allocation
{
qDebug("BladerfInput::start: allocate thread and take ownership");
bladerf2InputThread = new BladeRF2InputThread(m_deviceShared.m_dev->getDev(), requestedChannel+1);
m_thread = bladerf2InputThread; // take ownership
needsStart = true;
}
bladerf2InputThread->setFifo(requestedChannel, &m_sampleFifo);
bladerf2InputThread->setLog2Decimation(requestedChannel, m_settings.m_log2Decim);
bladerf2InputThread->setFcPos(requestedChannel, (int) m_settings.m_fcPos);
if (needsStart)
{
qDebug("BladerfInput::start: enabling channel(s) and (re)sart buddy thread");
int nbChannels = bladerf2InputThread->getNbChannels();
for (int i = 0; i < nbChannels; i++)
{
if (!m_deviceShared.m_dev->openRx(i)) {
qCritical("BladeRF2Input::start: channel %u cannot be enabled", i);
}
}
bladerf2InputThread->startWork();
}
applySettings(m_settings, true);
qDebug("BladeRF2Input::start: started");
m_running = true;
return true;
}
void BladeRF2Input::stop()
{
// This stop method is responsible for managing the thread and channel disabling when the streaming of
// a Rx channel is stopped
//
// If the thread is currently managing only one channel (SI mode). The thread can be just stopped and deleted.
// Then the channel is closed (disabled).
//
// If the thread is currently managing many channels (MI mode) and we are removing the last channel. The transition
// from MI to SI or reduction of MI size is handled by stopping the thread, deleting it and creating a new one
// with one channel less. Then the channel is closed (disabled).
//
// If the thread is currently managing many channels (MI mode) but the channel being stopped is not the last
// channel then the FIFO reference is simply removed from the thread so that it will not stream into this FIFO
// anymore. In this case the channel is not closed (disabled) so that other channels can continue with the
// same configuration. The device continues streaming on this channel but the samples are simply dropped (by
// removing FIFO reference).
if (!m_running) {
return;
}
int requestedChannel = m_deviceAPI->getItemIndex();
BladeRF2InputThread *bladerf2InputThread = findThread();
if (bladerf2InputThread == 0) { // no thread allocated
return;
}
int nbOriginalChannels = bladerf2InputThread->getNbChannels();
if (nbOriginalChannels == 1) // SI mode => just stop and delete the thread
{
qDebug("BladeRF2Input::stop: SI mode. Just stop and delete the thread");
bladerf2InputThread->stopWork();
delete bladerf2InputThread;
m_thread = 0;
// remove old thread address from buddies (reset in all buddies)
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator it = sourceBuddies.begin();
for (; it != sourceBuddies.end(); ++it) {
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_source->setThread(0);
}
m_deviceShared.m_dev->closeRx(0); // close the unique channel
}
else if (requestedChannel == nbOriginalChannels - 1) // remove last MI channel => reduce by deleting and re-creating the thread
{
qDebug("BladeRF2Input::stop: MI mode. Reduce by deleting and re-creating the thread");
bladerf2InputThread->stopWork();
SampleSinkFifo **fifos = new SampleSinkFifo*[nbOriginalChannels-1];
unsigned int *log2Decims = new unsigned int[nbOriginalChannels-1];
int *fcPoss = new int[nbOriginalChannels-1];
for (int i = 0; i < nbOriginalChannels-1; i++) // save original FIFO references
{
fifos[i] = bladerf2InputThread->getFifo(i);
log2Decims[i] = bladerf2InputThread->getLog2Decimation(i);
fcPoss[i] = bladerf2InputThread->getFcPos(i);
}
delete bladerf2InputThread;
bladerf2InputThread = new BladeRF2InputThread(m_deviceShared.m_dev->getDev(), nbOriginalChannels-1);
m_thread = bladerf2InputThread; // take ownership
for (int i = 0; i < nbOriginalChannels-1; i++) // restore original FIFO references
{
bladerf2InputThread->setFifo(i, fifos[i]);
bladerf2InputThread->setLog2Decimation(i, log2Decims[i]);
bladerf2InputThread->setFcPos(i, fcPoss[i]);
}
// remove old thread address from buddies (reset in all buddies)
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator it = sourceBuddies.begin();
for (; it != sourceBuddies.end(); ++it) {
((DeviceBladeRF2Shared*) (*it)->getBuddySharedPtr())->m_source->setThread(0);
}
m_deviceShared.m_dev->closeRx(requestedChannel); // close the last channel
bladerf2InputThread->startWork();
}
else // remove channel from existing thread
{
qDebug("BladeRF2Input::stop: MI mode. Not changing MI configuration. Just remove FIFO reference");
bladerf2InputThread->setFifo(requestedChannel, 0); // remove FIFO
}
m_running = false;
}
QByteArray BladeRF2Input::serialize() const
{
return m_settings.serialize();
}
bool BladeRF2Input::deserialize(const QByteArray& data)
{
bool success = true;
if (!m_settings.deserialize(data))
{
m_settings.resetToDefaults();
success = false;
}
MsgConfigureBladeRF2* message = MsgConfigureBladeRF2::create(m_settings, true);
m_inputMessageQueue.push(message);
if (m_guiMessageQueue)
{
MsgConfigureBladeRF2* messageToGUI = MsgConfigureBladeRF2::create(m_settings, true);
m_guiMessageQueue->push(messageToGUI);
}
return success;
}
const QString& BladeRF2Input::getDeviceDescription() const
{
return m_deviceDescription;
}
int BladeRF2Input::getSampleRate() const
{
int rate = m_settings.m_devSampleRate;
return (rate / (1<<m_settings.m_log2Decim));
}
quint64 BladeRF2Input::getCenterFrequency() const
{
return m_settings.m_centerFrequency;
}
void BladeRF2Input::setCenterFrequency(qint64 centerFrequency)
{
BladeRF2InputSettings settings = m_settings;
settings.m_centerFrequency = centerFrequency;
MsgConfigureBladeRF2* message = MsgConfigureBladeRF2::create(settings, false);
m_inputMessageQueue.push(message);
if (m_guiMessageQueue)
{
MsgConfigureBladeRF2* messageToGUI = MsgConfigureBladeRF2::create(settings, false);
m_guiMessageQueue->push(messageToGUI);
}
}
void BladeRF2Input::getFrequencyRange(uint64_t& min, uint64_t& max, int& step)
{
if (m_deviceShared.m_dev) {
m_deviceShared.m_dev->getFrequencyRangeRx(min, max, step);
}
}
void BladeRF2Input::getSampleRateRange(int& min, int& max, int& step)
{
if (m_deviceShared.m_dev) {
m_deviceShared.m_dev->getSampleRateRangeRx(min, max, step);
}
}
void BladeRF2Input::getBandwidthRange(int& min, int& max, int& step)
{
if (m_deviceShared.m_dev) {
m_deviceShared.m_dev->getBandwidthRangeRx(min, max, step);
}
}
void BladeRF2Input::getGlobalGainRange(int& min, int& max, int& step)
{
if (m_deviceShared.m_dev) {
m_deviceShared.m_dev->getGlobalGainRangeRx(min, max, step);
}
}
bool BladeRF2Input::handleMessage(const Message& message)
{
if (MsgConfigureBladeRF2::match(message))
{
MsgConfigureBladeRF2& conf = (MsgConfigureBladeRF2&) message;
qDebug() << "BladeRF2Input::handleMessage: MsgConfigureBladeRF2";
if (!applySettings(conf.getSettings(), conf.getForce()))
{
qDebug("BladeRF2Input::handleMessage: MsgConfigureBladeRF2 config error");
}
return true;
}
else if (DeviceBladeRF2Shared::MsgReportBuddyChange::match(message))
{
DeviceBladeRF2Shared::MsgReportBuddyChange& report = (DeviceBladeRF2Shared::MsgReportBuddyChange&) message;
struct bladerf *dev = m_deviceShared.m_dev->getDev();
BladeRF2InputSettings settings = m_settings;
int status;
unsigned int tmp_uint;
bool tmp_bool;
// evaluate changes that may have been introduced by changes in a buddy
if (dev) // The BladeRF device must have been open to do so
{
int requestedChannel = m_deviceAPI->getItemIndex();
if (report.getRxElseTx()) // Rx buddy change: check for: frequency, gain mode and value, bias tee, sample rate, bandwidth
{
settings.m_devSampleRate = report.getDevSampleRate();
settings.m_centerFrequency = report.getCenterFrequency();
status = bladerf_get_bandwidth(dev, BLADERF_CHANNEL_RX(requestedChannel), &tmp_uint);
if (status < 0) {
qCritical("BladeRF2Input::handleMessage: MsgReportBuddyChange: bladerf_get_bandwidth error: %s", bladerf_strerror(status));
} else {
settings.m_bandwidth = tmp_uint;
}
status = bladerf_get_bias_tee(dev, BLADERF_CHANNEL_RX(requestedChannel), &tmp_bool);
if (status < 0) {
qCritical("BladeRF2Input::handleMessage: MsgReportBuddyChange: bladerf_get_bias_tee error: %s", bladerf_strerror(status));
} else {
settings.m_biasTee = tmp_bool;
}
}
else // Tx buddy change: check for sample rate change only
{
status = bladerf_get_sample_rate(dev, BLADERF_CHANNEL_RX(requestedChannel), &tmp_uint);
if (status < 0) {
qCritical("BladeRF2Input::handleMessage: MsgReportBuddyChange: bladerf_get_sample_rate error: %s", bladerf_strerror(status));
} else {
settings.m_devSampleRate = tmp_uint+1;
}
}
// change DSP settings if buddy change introduced a change in center frequency or base rate
if ((settings.m_centerFrequency != m_settings.m_centerFrequency) || (settings.m_devSampleRate != m_settings.m_devSampleRate))
{
int sampleRate = settings.m_devSampleRate/(1<<settings.m_log2Decim);
DSPSignalNotification *notif = new DSPSignalNotification(sampleRate, settings.m_centerFrequency);
m_fileSink->handleMessage(*notif); // forward to file sink
m_deviceAPI->getDeviceEngineInputMessageQueue()->push(notif);
}
m_settings = settings; // acknowledge the new settings
// propagate settings to GUI if any
if (getMessageQueueToGUI())
{
MsgConfigureBladeRF2 *reportToGUI = MsgConfigureBladeRF2::create(m_settings, false);
getMessageQueueToGUI()->push(reportToGUI);
}
}
return true;
}
else if (MsgFileRecord::match(message))
{
MsgFileRecord& conf = (MsgFileRecord&) message;
qDebug() << "BladeRF2Input::handleMessage: MsgFileRecord: " << conf.getStartStop();
if (conf.getStartStop())
{
if (m_settings.m_fileRecordName.size() != 0) {
m_fileSink->setFileName(m_settings.m_fileRecordName);
} else {
m_fileSink->genUniqueFileName(m_deviceAPI->getDeviceUID());
}
m_fileSink->startRecording();
}
else
{
m_fileSink->stopRecording();
}
return true;
}
else if (MsgStartStop::match(message))
{
MsgStartStop& cmd = (MsgStartStop&) message;
qDebug() << "BladeRF2Input::handleMessage: MsgStartStop: " << (cmd.getStartStop() ? "start" : "stop");
if (cmd.getStartStop())
{
if (m_deviceAPI->initAcquisition())
{
m_deviceAPI->startAcquisition();
}
}
else
{
m_deviceAPI->stopAcquisition();
}
return true;
}
else
{
return false;
}
}
bool BladeRF2Input::applySettings(const BladeRF2InputSettings& settings, bool force)
{
bool forwardChangeOwnDSP = false;
bool forwardChangeRxBuddies = false;
bool forwardChangeTxBuddies = false;
struct bladerf *dev = m_deviceShared.m_dev->getDev();
int requestedChannel = m_deviceAPI->getItemIndex();
if ((m_settings.m_dcBlock != settings.m_dcBlock) ||
(m_settings.m_iqCorrection != settings.m_iqCorrection) || force)
{
m_deviceAPI->configureCorrections(settings.m_dcBlock, settings.m_iqCorrection);
}
if ((m_settings.m_devSampleRate != settings.m_devSampleRate) || force)
{
forwardChangeOwnDSP = true;
forwardChangeRxBuddies = true;
forwardChangeTxBuddies = true;
if (dev != 0)
{
unsigned int actualSamplerate;
int status = bladerf_set_sample_rate(dev, BLADERF_CHANNEL_RX(requestedChannel), settings.m_devSampleRate, &actualSamplerate);
if (status < 0)
{
qCritical("BladeRF2Input::applySettings: could not set sample rate: %d: %s",
settings.m_devSampleRate, bladerf_strerror(status));
}
else
{
qDebug() << "BladeRF2Input::applySettings: bladerf_set_sample_rate(BLADERF_MODULE_RX) actual sample rate is " << actualSamplerate;
}
}
}
if ((m_settings.m_bandwidth != settings.m_bandwidth) || force)
{
forwardChangeRxBuddies = true;
if (dev != 0)
{
unsigned int actualBandwidth;
int status = bladerf_set_bandwidth(dev, BLADERF_CHANNEL_RX(requestedChannel), settings.m_bandwidth, &actualBandwidth);
if(status < 0)
{
qCritical("BladeRF2Input::applySettings: could not set bandwidth: %d: %s",
settings.m_bandwidth, bladerf_strerror(status));
}
else
{
qDebug() << "BladeRF2Input::applySettings: bladerf_set_bandwidth(BLADERF_MODULE_RX) actual bandwidth is " << actualBandwidth;
}
}
}
if ((m_settings.m_fcPos != settings.m_fcPos) || force)
{
BladeRF2InputThread *inputThread = findThread();
if (inputThread != 0)
{
inputThread->setFcPos(requestedChannel, (int) settings.m_fcPos);
qDebug() << "BladeRF2Input::applySettings: set fc pos (enum) to " << (int) settings.m_fcPos;
}
}
if ((m_settings.m_log2Decim != settings.m_log2Decim) || force)
{
forwardChangeOwnDSP = true;
BladeRF2InputThread *inputThread = findThread();
if (inputThread != 0)
{
inputThread->setLog2Decimation(requestedChannel, settings.m_log2Decim);
qDebug() << "BladeRF2Input::applySettings: set decimation to " << (1<<settings.m_log2Decim);
}
}
if ((m_settings.m_centerFrequency != settings.m_centerFrequency)
|| (m_settings.m_devSampleRate != settings.m_devSampleRate)
|| (m_settings.m_fcPos != settings.m_fcPos)
|| (m_settings.m_log2Decim != settings.m_log2Decim) || force)
{
qint64 deviceCenterFrequency = DeviceSampleSource::calculateDeviceCenterFrequency(
settings.m_centerFrequency,
0,
settings.m_log2Decim,
(DeviceSampleSource::fcPos_t) settings.m_fcPos,
settings.m_devSampleRate);
forwardChangeOwnDSP = true;
forwardChangeRxBuddies = true;
if (dev != 0)
{
int status = bladerf_set_frequency(dev, BLADERF_CHANNEL_RX(requestedChannel), deviceCenterFrequency);
if (status < 0) {
qWarning("BladeRF2Input::applySettings: bladerf_set_frequency(%lld) failed: %s",
settings.m_centerFrequency, bladerf_strerror(status));
}
else
{
qDebug("BladeRF2Input::applySettings: bladerf_set_frequency(%lld)", settings.m_centerFrequency);
if (getMessageQueueToGUI())
{
int min, max, step;
getGlobalGainRange(min, max, step);
MsgReportGainRange *msg = MsgReportGainRange::create(min, max, step);
getMessageQueueToGUI()->push(msg);
}
}
}
}
if ((m_settings.m_biasTee != settings.m_biasTee) || force)
{
forwardChangeRxBuddies = true;
m_deviceShared.m_dev->setBiasTeeRx(settings.m_biasTee);
}
if ((m_settings.m_globalGain != settings.m_globalGain) || force)
{
forwardChangeRxBuddies = true;
if (dev)
{
// qDebug("BladeRF2Input::applySettings: channel: %d gain: %d", requestedChannel, settings.m_globalGain);
int status = bladerf_set_gain(dev, BLADERF_CHANNEL_RX(requestedChannel), settings.m_globalGain);
if (status < 0) {
qWarning("BladeRF2Input::applySettings: bladerf_set_gain(%d) failed: %s",
settings.m_globalGain, bladerf_strerror(status));
} else {
qDebug("BladeRF2Input::applySettings: bladerf_set_gain(%d)", settings.m_globalGain);
}
}
}
if ((m_settings.m_gainMode != settings.m_gainMode) || force)
{
forwardChangeRxBuddies = true;
if (dev)
{
int status = bladerf_set_gain_mode(dev, BLADERF_CHANNEL_RX(requestedChannel), (bladerf_gain_mode) settings.m_gainMode);
if (status < 0) {
qWarning("BladeRF2Input::applySettings: bladerf_set_gain_mode(%d) failed: %s",
settings.m_gainMode, bladerf_strerror(status));
} else {
qDebug("BladeRF2Input::applySettings: bladerf_set_gain_mode(%d)", settings.m_gainMode);
}
}
}
if (forwardChangeOwnDSP)
{
int sampleRate = settings.m_devSampleRate/(1<<settings.m_log2Decim);
DSPSignalNotification *notif = new DSPSignalNotification(sampleRate, settings.m_centerFrequency);
m_fileSink->handleMessage(*notif); // forward to file sink
m_deviceAPI->getDeviceEngineInputMessageQueue()->push(notif);
}
if (forwardChangeRxBuddies)
{
// send to source buddies
const std::vector<DeviceSourceAPI*>& sourceBuddies = m_deviceAPI->getSourceBuddies();
std::vector<DeviceSourceAPI*>::const_iterator itSource = sourceBuddies.begin();
for (; itSource != sourceBuddies.end(); ++itSource)
{
DeviceBladeRF2Shared::MsgReportBuddyChange *report = DeviceBladeRF2Shared::MsgReportBuddyChange::create(
settings.m_centerFrequency,
settings.m_devSampleRate,
true);
(*itSource)->getSampleSourceInputMessageQueue()->push(report);
}
}
if (forwardChangeTxBuddies)
{
// send to sink buddies
const std::vector<DeviceSinkAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies();
std::vector<DeviceSinkAPI*>::const_iterator itSink = sinkBuddies.begin();
for (; itSink != sinkBuddies.end(); ++itSink)
{
DeviceBladeRF2Shared::MsgReportBuddyChange *report = DeviceBladeRF2Shared::MsgReportBuddyChange::create(
settings.m_centerFrequency,
settings.m_devSampleRate,
true);
(*itSink)->getSampleSinkInputMessageQueue()->push(report);
}
}
m_settings = settings;
qDebug() << "BladeRF2Input::applySettings: "
<< " m_centerFrequency: " << m_settings.m_centerFrequency << " Hz"
<< " m_bandwidth: " << m_settings.m_bandwidth
<< " m_log2Decim: " << m_settings.m_log2Decim
<< " m_fcPos: " << m_settings.m_fcPos
<< " m_devSampleRate: " << m_settings.m_devSampleRate
<< " m_globalGain: " << m_settings.m_globalGain
<< " m_gainMode: " << m_settings.m_gainMode
<< " m_dcBlock: " << m_settings.m_dcBlock
<< " m_iqCorrection: " << m_settings.m_iqCorrection
<< " m_biasTee: " << m_settings.m_biasTee;
return true;
}
int BladeRF2Input::webapiSettingsGet(
SWGSDRangel::SWGDeviceSettings& response,
QString& errorMessage __attribute__((unused)))
{
response.setBladeRf2InputSettings(new SWGSDRangel::SWGBladeRF2InputSettings());
response.getBladeRf2InputSettings()->init();
webapiFormatDeviceSettings(response, m_settings);
return 200;
}
int BladeRF2Input::webapiSettingsPutPatch(
bool force,
const QStringList& deviceSettingsKeys,
SWGSDRangel::SWGDeviceSettings& response, // query + response
QString& errorMessage __attribute__((unused)))
{
BladeRF2InputSettings settings = m_settings;
if (deviceSettingsKeys.contains("centerFrequency")) {
settings.m_centerFrequency = response.getBladeRf2InputSettings()->getCenterFrequency();
}
if (deviceSettingsKeys.contains("devSampleRate")) {
settings.m_devSampleRate = response.getBladeRf2InputSettings()->getDevSampleRate();
}
if (deviceSettingsKeys.contains("bandwidth")) {
settings.m_bandwidth = response.getBladeRf2InputSettings()->getBandwidth();
}
if (deviceSettingsKeys.contains("log2Decim")) {
settings.m_log2Decim = response.getBladeRf2InputSettings()->getLog2Decim();
}
if (deviceSettingsKeys.contains("fcPos")) {
settings.m_fcPos = static_cast<BladeRF2InputSettings::fcPos_t>(response.getBladeRf2InputSettings()->getFcPos());
}
if (deviceSettingsKeys.contains("dcBlock")) {
settings.m_dcBlock = response.getBladeRf2InputSettings()->getDcBlock() != 0;
}
if (deviceSettingsKeys.contains("iqCorrection")) {
settings.m_iqCorrection = response.getBladeRf2InputSettings()->getIqCorrection() != 0;
}
if (deviceSettingsKeys.contains("biasTee")) {
settings.m_biasTee = response.getBladeRf2InputSettings()->getBiasTee() != 0;
}
if (deviceSettingsKeys.contains("gainMode")) {
settings.m_gainMode = response.getBladeRf2InputSettings()->getGainMode();
}
if (deviceSettingsKeys.contains("globalGain")) {
settings.m_globalGain = response.getBladeRf2InputSettings()->getGlobalGain();
}
if (deviceSettingsKeys.contains("fileRecordName")) {
settings.m_fileRecordName = *response.getBladeRf1InputSettings()->getFileRecordName();
}
MsgConfigureBladeRF2 *msg = MsgConfigureBladeRF2::create(settings, force);
m_inputMessageQueue.push(msg);
if (m_guiMessageQueue) // forward to GUI if any
{
MsgConfigureBladeRF2 *msgToGUI = MsgConfigureBladeRF2::create(settings, force);
m_guiMessageQueue->push(msgToGUI);
}
webapiFormatDeviceSettings(response, settings);
return 200;
}
int BladeRF2Input::webapiReportGet(SWGSDRangel::SWGDeviceReport& response, QString& errorMessage __attribute__((unused)))
{
response.setBladeRf2InputReport(new SWGSDRangel::SWGBladeRF2InputReport());
response.getBladeRf2InputReport()->init();
webapiFormatDeviceReport(response);
return 200;
}
void BladeRF2Input::webapiFormatDeviceSettings(SWGSDRangel::SWGDeviceSettings& response, const BladeRF2InputSettings& settings)
{
response.getBladeRf2InputSettings()->setCenterFrequency(settings.m_centerFrequency);
response.getBladeRf2InputSettings()->setDevSampleRate(settings.m_devSampleRate);
response.getBladeRf2InputSettings()->setBandwidth(settings.m_bandwidth);
response.getBladeRf2InputSettings()->setLog2Decim(settings.m_log2Decim);
response.getBladeRf2InputSettings()->setFcPos((int) settings.m_fcPos);
response.getBladeRf2InputSettings()->setDcBlock(settings.m_dcBlock ? 1 : 0);
response.getBladeRf2InputSettings()->setIqCorrection(settings.m_iqCorrection ? 1 : 0);
response.getBladeRf2InputSettings()->setBiasTee(settings.m_biasTee ? 1 : 0);
response.getBladeRf2InputSettings()->setGainMode(settings.m_gainMode);
response.getBladeRf2InputSettings()->setGlobalGain(settings.m_globalGain);
if (response.getBladeRf2InputSettings()->getFileRecordName()) {
*response.getBladeRf2InputSettings()->getFileRecordName() = settings.m_fileRecordName;
} else {
response.getBladeRf2InputSettings()->setFileRecordName(new QString(settings.m_fileRecordName));
}
}
void BladeRF2Input::webapiFormatDeviceReport(SWGSDRangel::SWGDeviceReport& response)
{
DeviceBladeRF2 *device = m_deviceShared.m_dev;
if (device)
{
int min, max, step;
uint64_t f_min, f_max;
device->getBandwidthRangeRx(min, max, step);
response.getBladeRf2InputReport()->setBandwidthRange(new SWGSDRangel::SWGRange);
response.getBladeRf2InputReport()->getBandwidthRange()->setMin(min);
response.getBladeRf2InputReport()->getBandwidthRange()->setMax(max);
response.getBladeRf2InputReport()->getBandwidthRange()->setStep(step);
device->getFrequencyRangeRx(f_min, f_max, step);
response.getBladeRf2InputReport()->setFrequencyRange(new SWGSDRangel::SWGFrequencyRange);
response.getBladeRf2InputReport()->getFrequencyRange()->setMin(f_min);
response.getBladeRf2InputReport()->getFrequencyRange()->setMax(f_max);
response.getBladeRf2InputReport()->getFrequencyRange()->setStep(step);
device->getGlobalGainRangeRx(min, max, step);
response.getBladeRf2InputReport()->setGlobalGainRange(new SWGSDRangel::SWGRange);
response.getBladeRf2InputReport()->getGlobalGainRange()->setMin(min);
response.getBladeRf2InputReport()->getGlobalGainRange()->setMax(max);
response.getBladeRf2InputReport()->getGlobalGainRange()->setStep(step);
device->getSampleRateRangeRx(min, max, step);
response.getBladeRf2InputReport()->setSampleRateRange(new SWGSDRangel::SWGRange);
response.getBladeRf2InputReport()->getSampleRateRange()->setMin(min);
response.getBladeRf2InputReport()->getSampleRateRange()->setMax(max);
response.getBladeRf2InputReport()->getSampleRateRange()->setStep(step);
response.getBladeRf2InputReport()->setGainModes(new QList<SWGSDRangel::SWGNamedEnum*>);
const std::vector<GainMode>& modes = getGainModes();
std::vector<GainMode>::const_iterator it = modes.begin();
for (; it != modes.end(); ++it)
{
response.getBladeRf2InputReport()->getGainModes()->append(new SWGSDRangel::SWGNamedEnum);
response.getBladeRf2InputReport()->getGainModes()->back()->setName(new QString(it->m_name));
response.getBladeRf2InputReport()->getGainModes()->back()->setValue(it->m_value);
}
}
}
int BladeRF2Input::webapiRunGet(
SWGSDRangel::SWGDeviceState& response,
QString& errorMessage __attribute__((unused)))
{
m_deviceAPI->getDeviceEngineStateStr(*response.getState());
return 200;
}
int BladeRF2Input::webapiRun(
bool run,
SWGSDRangel::SWGDeviceState& response,
QString& errorMessage __attribute__((unused)))
{
m_deviceAPI->getDeviceEngineStateStr(*response.getState());
MsgStartStop *message = MsgStartStop::create(run);
m_inputMessageQueue.push(message);
if (m_guiMessageQueue) // forward to GUI if any
{
MsgStartStop *msgToGUI = MsgStartStop::create(run);
m_guiMessageQueue->push(msgToGUI);
}
return 200;
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik