LimeSDR output: regulate Tx output

devices/limesdr/devicelimesdrshared.h

@@ -52,6 +52,7 @@ public:
     public:
         virtual void startWork() = 0;
         virtual void stopWork() = 0;
+        virtual void setDeviceSampleRate(int sampleRate) = 0;
     };
 
     DeviceLimeSDRParams *m_deviceParams; //!< unique hardware device parameters

plugins/samplesink/limesdroutput/limesdroutput.cpp

@@ -164,8 +164,8 @@ bool LimeSDROutput::openDevice()
     // set up the stream
 
     m_streamId.channel =  m_deviceShared.m_channel; // channel number
-    m_streamId.fifoSize = 1024 * 128;               // fifo size in samples
-    m_streamId.throughputVsLatency = 1.0;           // optimize for max throughput
+    m_streamId.fifoSize = 5000000;                  // fifo size in samples
+    m_streamId.throughputVsLatency = 0.0;           // optimize for max throughput
     m_streamId.isTx = true;                         // TX channel
     m_streamId.dataFmt = lms_stream_t::LMS_FMT_I12; // 12-bit integers
 
@@ -576,6 +576,23 @@ bool LimeSDROutput::applySettings(const LimeSDROutputSettings& settings, bool fo
                         m_settings.m_devSampleRate,
                         1<<m_settings.m_log2HardInterp);
             }
+
+            if (m_limeSDROutputThread != 0)
+            {
+                m_limeSDROutputThread->setDeviceSampleRate(m_settings.m_devSampleRate);
+            }
+
+            const std::vector<DeviceSinkAPI*>& sinkBuddies = m_deviceAPI->getSinkBuddies();
+            std::vector<DeviceSinkAPI*>::const_iterator itSink = sinkBuddies.begin();
+
+            for (; itSink != sinkBuddies.end(); ++itSink)
+            {
+                DeviceLimeSDRShared *buddySharedPtr = (DeviceLimeSDRShared *) (*itSink)->getBuddySharedPtr();
+
+                if (buddySharedPtr->m_thread) {
+                    buddySharedPtr->m_thread->setDeviceSampleRate(m_settings.m_devSampleRate);
+                }
+            }
         }
     }
 
@@ -703,11 +720,11 @@ bool LimeSDROutput::applySettings(const LimeSDROutputSettings& settings, bool fo
                 m_settings.m_lpfBW,
                 0) < 0)
         {
-            qCritical("LimeSDROutput::applySettings: calibration failed on Rx channel %lu", m_deviceShared.m_channel);
+            qCritical("LimeSDROutput::applySettings: calibration failed on Tx channel %lu", m_deviceShared.m_channel);
         }
         else
         {
-            qDebug("LimeSDROutput::applySettings: calibration successful on Rx channel %lu", m_deviceShared.m_channel);
+            qDebug("LimeSDROutput::applySettings: calibration successful on Tx channel %lu", m_deviceShared.m_channel);
         }
     }
 

plugins/samplesink/limesdroutput/limesdroutputgui.cpp

@@ -225,7 +225,7 @@ void LimeSDROutputGUI::handleMessagesToGUI()
 
                 ui->fifoBar->setMaximum(report->getFifoSize());
                 ui->fifoBar->setValue(report->getFifoFilledCount());
-                ui->fifoBar->setToolTip(tr("FIFO fill %1/%2 bytes").arg(QString::number(report->getFifoFilledCount())).arg(QString::number(report->getFifoSize())));
+                ui->fifoBar->setToolTip(tr("FIFO fill %1/%2 samples").arg(QString::number(report->getFifoFilledCount())).arg(QString::number(report->getFifoSize())));
             }
             else
             {
@@ -382,7 +382,7 @@ void LimeSDROutputGUI::on_sampleRate_changed(quint64 value)
     setNCODisplay();
     sendSettings();}
 
-void LimeSDROutputGUI::on_hwDecim_currentIndexChanged(int index)
+void LimeSDROutputGUI::on_hwInterp_currentIndexChanged(int index)
 {
     if ((index <0) || (index > 5))
         return;
@@ -391,7 +391,7 @@ void LimeSDROutputGUI::on_hwDecim_currentIndexChanged(int index)
     sendSettings();
 }
 
-void LimeSDROutputGUI::on_swDecim_currentIndexChanged(int index)
+void LimeSDROutputGUI::on_swInterp_currentIndexChanged(int index)
 {
     if ((index <0) || (index > 5))
         return;

plugins/samplesink/limesdroutput/limesdroutputgui.h

@@ -79,8 +79,8 @@ private slots:
     void on_ncoEnable_toggled(bool checked);
     void on_ncoReset_clicked(bool checked);
     void on_sampleRate_changed(quint64 value);
-    void on_hwDecim_currentIndexChanged(int index);
-    void on_swDecim_currentIndexChanged(int index);
+    void on_hwInterp_currentIndexChanged(int index);
+    void on_swInterp_currentIndexChanged(int index);
     void on_lpf_changed(quint64 value);
     void on_lpFIREnable_toggled(bool checked);
     void on_lpFIR_changed(quint64 value);

plugins/samplesink/limesdroutput/limesdroutputthread.cpp

@@ -24,6 +24,7 @@ LimeSDROutputThread::LimeSDROutputThread(lms_stream_t* stream, SampleSourceFifo*
     m_running(false),
     m_stream(stream),
     m_sampleFifo(sampleFifo),
+    m_sampleRate(5000000),
     m_log2Interp(0),
     m_fcPos(LimeSDROutputSettings::FC_POS_CENTER)
 {
@@ -66,7 +67,8 @@ void LimeSDROutputThread::setFcPos(int fcPos)
 
 void LimeSDROutputThread::run()
 {
-    int res;
+    int res, count, msleep, mdelta;
+    lms_stream_status_t streamStatus;
 
     lms_stream_meta_t metadata;          //Use metadata for additional control over sample receive function behaviour
     metadata.flushPartialPacket = false; //Do not discard data remainder when read size differs from packet size
@@ -81,15 +83,46 @@ void LimeSDROutputThread::run()
         qDebug("LimeSDROutputThread::run: stream started");
     }
 
+    count = 0;
+    msleep = LIMESDROUTPUT_BLOCKSIZE/(m_sampleRate/1e6f);
+    mdelta = msleep/100;
+    msleep = (3*msleep)/4; // to start faster
+
     while (m_running)
     {
         callback(m_buf, LIMESDROUTPUT_BLOCKSIZE);
 
-        if ((res = LMS_SendStream(m_stream, (void *) m_buf, LIMESDROUTPUT_BLOCKSIZE, &metadata, 1000)) < 0)
+        res = LMS_SendStream(m_stream, (void *) m_buf, LIMESDROUTPUT_BLOCKSIZE, &metadata, 1000);
+
+        if (res < 0)
         {
             qCritical("LimeSDROutputThread::run write error: %s", strerror(errno));
             break;
         }
+        else if (res != LIMESDROUTPUT_BLOCKSIZE)
+        {
+            qDebug("LimeSDROutputThread::run written %d/%d samples", res, LIMESDROUTPUT_BLOCKSIZE);
+        }
+
+        usleep(msleep);
+
+        if (count < 10)
+        {
+            count++;
+        }
+        else
+        {
+            if (LMS_GetStreamStatus(m_stream, &streamStatus) == 0)
+            {
+                if (streamStatus.fifoFilledCount < (4*streamStatus.fifoSize)/5) { // FIFO at 80%
+                    msleep -= mdelta;
+                } else {
+                    msleep += mdelta;
+                }
+            }
+
+            count = 0;
+        }
     }
 
     if (LMS_StopStream(m_stream) < 0) {

plugins/samplesink/limesdroutput/limesdroutputthread.h

@@ -27,7 +27,7 @@
 #include "dsp/interpolators.h"
 #include "limesdr/devicelimesdrshared.h"
 
-#define LIMESDROUTPUT_BLOCKSIZE (1<<14) //complex samples per buffer ~10k (16k)
+#define LIMESDROUTPUT_BLOCKSIZE (1<<15) //complex samples per buffer ~10k (16k)
 
 class LimeSDROutputThread : public QThread, public DeviceLimeSDRShared::ThreadInterface
 {
@@ -39,6 +39,7 @@ public:
 
     virtual void startWork();
     virtual void stopWork();
+    virtual void setDeviceSampleRate(int sampleRate) { m_sampleRate = sampleRate; }
     void setLog2Interpolation(unsigned int log2_ioterp);
     void setFcPos(int fcPos);
 
@@ -51,6 +52,7 @@ private:
     qint16 m_buf[2*LIMESDROUTPUT_BLOCKSIZE]; //must hold I+Q values of each sample hence 2xcomplex size
     SampleSourceFifo* m_sampleFifo;
 
+    int m_sampleRate;
     unsigned int m_log2Interp; // soft decimation
     int m_fcPos;
 

plugins/samplesource/limesdrinput/limesdrinputgui.cpp

@@ -228,7 +228,7 @@ void LimeSDRInputGUI::handleMessagesToGUI()
 
                 ui->fifoBar->setMaximum(report->getFifoSize());
                 ui->fifoBar->setValue(report->getFifoFilledCount());
-                ui->fifoBar->setToolTip(tr("FIFO fill %1/%2 bytes").arg(QString::number(report->getFifoFilledCount())).arg(QString::number(report->getFifoSize())));
+                ui->fifoBar->setToolTip(tr("FIFO fill %1/%2 samples").arg(QString::number(report->getFifoFilledCount())).arg(QString::number(report->getFifoSize())));
             }
             else
             {

plugins/samplesource/limesdrinput/limesdrinputthread.h

@@ -39,6 +39,7 @@ public:
 
     virtual void startWork();
     virtual void stopWork();
+    virtual void setDeviceSampleRate(int sampleRate) {}
     void setLog2Decimation(unsigned int log2_decim);
     void setFcPos(int fcPos);