kopia lustrzana https://github.com/fhdm-dev/scoppy
initial commit
rodzic
e7ba0b1e5c
commit
6f8066cb59
|
@ -0,0 +1,53 @@
|
||||||
|
---
|
||||||
|
title: FSCOPE/DSO-500K Revision 4b and lower
|
||||||
|
---
|
||||||
|
|
||||||
|
### Unpopulated holes/pads
|
||||||
|
|
||||||
|
> If you have Rev. 2 of the FSCOPE board please see [FSCOPE-250K-Rev2](fscope-250k-rev2)
|
||||||
|
|
||||||
|
There will be some unpopulated holes/pads on your board. Depending on your board revision these may include:
|
||||||
|
|
||||||
|
_H9, H10_
|
||||||
|
<br>
|
||||||
|
These are tiny prototyping areas. One hole is connected to GND. The others are not connected to anything.
|
||||||
|
|
||||||
|
_R32, R33_
|
||||||
|
<br>
|
||||||
|
Extra current limiting resistors for the Wi-Fi and Trigger LEDS. Add resistors here (and possibly remove R30/R31) to adjust
|
||||||
|
LED brightness.
|
||||||
|
|
||||||
|
_SWCLK, SWDIO_
|
||||||
|
<br>
|
||||||
|
Debug headers
|
||||||
|
|
||||||
|
_H11_
|
||||||
|
<br>
|
||||||
|
Not used
|
||||||
|
|
||||||
|
_+3.3V, VSYS_
|
||||||
|
<br>
|
||||||
|
Test points
|
||||||
|
|
||||||
|
_-2.5V_
|
||||||
|
<br>
|
||||||
|
Test point for the -2.5V rail. Do not draw current from this rail as it will adversely affect the performance
|
||||||
|
of the oscilloscope.
|
||||||
|
|
||||||
|
_H17, RESTART_
|
||||||
|
<br>
|
||||||
|
Shorting these will restart the Pico (W). A momentary switch could be soldered to these holes/pads to make it easier to restart
|
||||||
|
the oscilloscope.
|
||||||
|
|
||||||
|
_H7, H15, R35, R36_
|
||||||
|
<br>
|
||||||
|
For connecting external Wi-Fi and Trigger LEDS if the board is to be enclosed in a case.
|
||||||
|
|
||||||
|
_H16, R32_
|
||||||
|
<br>
|
||||||
|
For connecting an external status LED if the board is to be enclosed in a case (no firmware support for this as yet).
|
||||||
|
|
||||||
|
## See also
|
||||||
|
{% include wifi-links.md %}
|
||||||
|
<br>
|
||||||
|
{% include scoppy-links.md %}
|
|
@ -67,26 +67,11 @@ See [here](fscope-dso-500k-dimensions)
|
||||||
#### Unpopulated holes/pads
|
#### Unpopulated holes/pads
|
||||||
|
|
||||||
> If you have Rev. 2 of the FSCOPE board please see [FSCOPE-250K-Rev2](fscope-250k-rev2)
|
> If you have Rev. 2 of the FSCOPE board please see [FSCOPE-250K-Rev2](fscope-250k-rev2)
|
||||||
|
<br>
|
||||||
|
> If you have Rev 4, 4a or 4b please see [FSCOPE-500K 4b](fscope-dso-500k-4b-unpopulated)
|
||||||
|
|
||||||
There will be some unpopulated holes/pads on your board. Depending on your board revision these may include:
|
There will be some unpopulated holes/pads on your board. Depending on your board revision these may include:
|
||||||
|
|
||||||
_H9, H10_
|
|
||||||
<br>
|
|
||||||
These are tiny prototyping areas. One hole is connected to GND. The others are not connected to anything.
|
|
||||||
|
|
||||||
_R32, R33_
|
|
||||||
<br>
|
|
||||||
Extra current limiting resistors for the Wi-Fi and Trigger LEDS. Add resistors here (and possibly remove R30/R31) to adjust
|
|
||||||
LED brightness.
|
|
||||||
|
|
||||||
_SWCLK, SWDIO_
|
|
||||||
<br>
|
|
||||||
Debug headers
|
|
||||||
|
|
||||||
_H11_
|
|
||||||
<br>
|
|
||||||
Not used
|
|
||||||
|
|
||||||
_+3.3V, VSYS_
|
_+3.3V, VSYS_
|
||||||
<br>
|
<br>
|
||||||
Test points
|
Test points
|
||||||
|
@ -96,19 +81,19 @@ _-2.5V_
|
||||||
Test point for the -2.5V rail. Do not draw current from this rail as it will adversely affect the performance
|
Test point for the -2.5V rail. Do not draw current from this rail as it will adversely affect the performance
|
||||||
of the oscilloscope.
|
of the oscilloscope.
|
||||||
|
|
||||||
_H17, RESTART_
|
_H17_
|
||||||
<br>
|
<br>
|
||||||
Shorting these will restart the Pico (W). A momentary switch could be soldered to these holes/pads to make it easier to restart
|
Restart/Reset. Shorting these will restart the DSO-500K. A momentary switch could be soldered to these holes/pads to make it easier to restart the oscilloscope. Double clicking the switch will cause the Pico W on the DSO-500K to enter USB mass storage mode.
|
||||||
the oscilloscope.
|
|
||||||
|
|
||||||
_H7, H15, R35, R36_
|
_H7, H15_
|
||||||
<br>
|
<br>
|
||||||
For connecting external Wi-Fi and Trigger LEDS if the board is to be enclosed in a case.
|
For connecting external Wi-Fi and Trigger LEDS if the board is to be enclosed in a case.
|
||||||
|
|
||||||
_H16, R32_
|
_H9, R32_
|
||||||
<br>
|
<br>
|
||||||
For connecting an external status LED if the board is to be enclosed in a case (no firmware support for this as yet).
|
For connecting an external status LED if the board is to be enclosed in a case (no firmware support for this as yet).
|
||||||
|
|
||||||
|
|
||||||
#### Miscellaneous
|
#### Miscellaneous
|
||||||
|
|
||||||
The holes at the corners of the board are 3.3mm (130 mil).
|
The holes at the corners of the board are 3.3mm (130 mil).
|
||||||
|
|
Ładowanie…
Reference in New Issue