sane-project-website/unsupported/hp-scanjet-4570c.html

285 wiersze
9.2 KiB
HTML

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="/favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="/favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Hewlett-Packard Scanjet 4570c
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x03f0
</p>
<h2>Product ID</h2>
<p>
0x1305
</p>
<h2>Chipset</h2>
<p>
Similar to a GL841. Not yet confirmed, however. sane-find-scanner seems to
be able to communicate with the chipset in GL841 mode but it doesn't get
the same value it writes to the register back when reading.
</p>
<pre>
These are the chips on the board:
U1
AH50
169F8
Pinout: 3 pins
U2,U3,U14
ATC
AP34063
0241A
DC/DC Converter
http://www.anachip.com/downloads/datasheets/power/sw_reg/AP34063.pdf
U4
WM8199CDS
28AC3TX
16-bit analogue front end/digitiser
http://www.wolfsonmicro.com/products/digital_imaging/WM8199/
U6
26-00188-00B
0240MF79K-01
Pinout: 4x52 = 208
U7
A3967SLB
A 0243
M243967APA
Step motor driver
http://www.allegromicro.com/sf/3967/
U8
Winbond
241WH
W981616BH-7
16Mbit SDRAM
http://www.winbond.com/e-winbondhtm/partner/PDFresult.asp?Pname=241
U9
Ver 026
CheckSum:
9D29
EPROM?
Pinout: 4x9
U10
26-00053-02A
0227MFASH-33
Pinout: 4x12
U12
24LC08B
SN0212
8K I2C Serial EE
http://www.microchip.com/download/lit/pline/memory/ic/21710a.pdf
</pre>
<h2>Comments</h2>
<p>
Some discussion about the protocol can be found in the <a
href="http://lists.alioth.debian.org/pipermail/sane-devel/2005-September/014618.html">sane-devel
mailinglist archive</a>.
</p>
<p>
Portrait scanner with TA, similar to <a
href="hp-scanjet-4500c.html">4500C</a>. Same as 5550C, but without
ADF. The manual says: 4500c and 5500c series.
</p>
<p>
For more information, see bug report <a href="https://alioth.debian.org/tracker/index.php?func=detail&aid=301110&group_id=30186&atid=410366">#301110</a>.
</p>
<p>
"According to manual similar to 4500c and 5500c series scanners. It comes
with a transparent materials adaptor (TMA). [...] The TMA is an external
device which can be unplugged. Windows XP refers to it as HP ScanJet
4570c/5500c Windows uses usbscn.sys hpgtbb.dll hpgwiand.dll hpsjvset.dll."
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
<pre>
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=1305 Rev= 3.01
S: Manufacturer=Hewlett-Packard
S: Product=hp scanjet scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
&lt;device descriptor of 0x03f0/0x1305 at 001:002 (Hewlett-Packard hp
scanjet scanner)&gt;
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x03F0
idProduct 0x1305
bcdDevice 3.01
iManufacturer 1 (Hewlett-Packard)
iProduct 2 (hp scanjet scanner)
iSerialNumber 0 ()
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass =
255)
checking for GL841 ...
this is not a GL841 (reg 0x38 != 0x15)
checking for ICM532B ...
check 2, this is not a ICM532B (bcdUSB = 0x200)
&lt;Couldn't determine the type of the USB chip&gt;
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x1305 [hp scanjet scanner]) at libusb:001:002
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="/bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="/manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="/manufacturers.html">information for manufacturers</a>.
</p>
<h1>Links</h1>
<ul>
<li>
General information on how to <a href="/contrib.html">contribute to SANE</a>, e.g. by writing
backends
</li>
<li>
<a
href="/cgi-bin/driver.pl">Scanner
search engine</a>
</li>
<li>
<a href="http://www.sane-project.org/">SANE homepage</a>
</li>
</ul>
<hr>
<p>
<a href="/">SANE homepage</a><br>
<a href="/imprint.html">Contact</a>
</p>
<p>
<font size="-1">$Date$ $Author$</font>
</p>
</body>
</html>