kopia lustrzana https://gitlab.com/sane-project/website
256 wiersze
9.6 KiB
HTML
256 wiersze
9.6 KiB
HTML
<HTML>
|
|
<HEAD>
|
|
<TITLE>sane-umax.5</TITLE>
|
|
</HEAD>
|
|
<BODY BGCOLOR=#FFFFFF TEXT=#000000><H1 ALIGN=CENTER><IMG SRC="/images/sane.png" HEIGHT=117 WIDTH=346></H1>
|
|
<H1>sane-umax.5</H1>
|
|
<HR>
|
|
<PRE>
|
|
<!-- Manpage converted by man2html 3.0.1 -->
|
|
<B><A HREF="sane-umax.5.html">sane-umax(5)</A></B> SANE Scanner Access Now Easy <B><A HREF="sane-umax.5.html">sane-umax(5)</A></B>
|
|
|
|
|
|
</PRE>
|
|
<H2>NAME</H2><PRE>
|
|
sane-umax - SANE backend for UMAX scanners
|
|
|
|
|
|
</PRE>
|
|
<H2>ABOUT THIS FILE</H2><PRE>
|
|
This file only is a short descripton of the umax-backend for sane! For
|
|
detailled information take a look at sane-umax-doc.html (it is included
|
|
in the sane source directory and in the xsane online help)!
|
|
|
|
|
|
</PRE>
|
|
<H2>DESCRIPTION</H2><PRE>
|
|
The <B>sane-umax</B> library implements a SANE backend that provides acces to
|
|
several UMAX-SCSI-scanners and some Linotye Hell SCSI-scanners, paral-
|
|
lel- and USB-scanners are not (and propably will never be) supported!
|
|
|
|
<B>I</B> <B>suggest</B> <B>you</B> <B>hold</B> <B>one</B> <B>hand</B> <B>on</B> <B>the</B> <B>power-button</B> <B>of</B> <B>the</B> <B>scanner</B> <B>while</B>
|
|
<B>you</B> <B>try</B> <B>the</B> <B>first</B> <B>scans!</B>
|
|
|
|
|
|
</PRE>
|
|
<H2>CONFIGURATION</H2><PRE>
|
|
The configuration file for this backend resides in
|
|
<I>/usr/local/etc/sane.d/umax.conf</I>.
|
|
|
|
Its contents is a list of device names that correspond to UMAX and UMAX
|
|
compatible scanners. Empty lines and lines starting with a hash mark
|
|
(#) are ignored. A sample configuration file is shown below:
|
|
|
|
# this is a comment
|
|
#
|
|
option scsi-maxqueue 4
|
|
option scsi-buffer-size-min 65536
|
|
option scsi-buffer-size-max 131072
|
|
option scan-lines 40
|
|
option preview-lines 10
|
|
option scsi-maxqueue 2
|
|
option execute-request-sense 0
|
|
option force-preview-bit-rgb 0
|
|
option slow-speed -1
|
|
option care-about-smearing -1
|
|
option calibration-full-ccd -1
|
|
option calibration-width-offset -1
|
|
option calibration-bytes-pixel -1
|
|
option exposure-time-rgb-bind -1
|
|
option invert-shading-data -1
|
|
option lamp-control-available 0
|
|
option gamma-lsb-padded 0
|
|
/dev/sge
|
|
|
|
#scsi Vendor Model Type Bus Channel ID LUN
|
|
# The following scanner supports lamp control
|
|
option lamp-control-available 1
|
|
scsi UMAX * Scanner * * * * *
|
|
|
|
# scanner on /dev/scanner does not support lamp control
|
|
option lamp-control-available 0
|
|
/dev/scanner
|
|
|
|
execute-request-sense:
|
|
values: 0 = disabled, 1 = enabled
|
|
default = 0
|
|
If set to 1 umax_do_request_sense is called in
|
|
umax_do_calibration. This can hang the system (but has been
|
|
enabled until this version)
|
|
|
|
scsi-buffer-size-min, scsi-buffer-size-max:
|
|
values: 4096-1048576
|
|
default min = 32768, max = 131072
|
|
Especially the minimum value is very important. If this value
|
|
is set too small the backend is not able to send gamma tables to
|
|
the scanner or to do a correct color calibration. This may
|
|
result in strange color effects. If the minimum value is set too
|
|
large then the backend is not able to allocate the requested
|
|
scsi buffer size and aborts with out of memory error. The
|
|
default is 32KB, for some scanners it should be increased to
|
|
64KB.
|
|
|
|
scan-lines, preview-lines:
|
|
values: 1-65535
|
|
default: scan-lines = 40, preview-lines = 10
|
|
define the maximum number of lines that are scanned into one
|
|
buffer
|
|
|
|
force-preview-bit-rgb:
|
|
values: 0 = disabled, 1 = enabled
|
|
default = 0
|
|
set preview bit in rgb real scan
|
|
|
|
slow-speed, care-about-smearing:
|
|
values: -1 = auto, 0 = disabled, 1 = enabled
|
|
default = -1
|
|
dangerous options, needed for some scanners do not changed these
|
|
options until you really know what you do, you may destroy your
|
|
scanner when you define wrong values for this options
|
|
|
|
calibration-full-ccd:
|
|
values: -1 = auto, 0 = disabled, 1 = enabled
|
|
default = -1
|
|
do calibration for each pixel of ccd instead of selected image
|
|
|
|
calibration-width-offset:
|
|
values: -99999 = auto, > -99999 set value
|
|
add an offset width to the calculated with for image/ccd
|
|
|
|
calibration-bytes-pixel:
|
|
values: -1 = disabled, 0 = not set, 1 = 1 byte/pixel, 2 = 2
|
|
bytes/pixel
|
|
use # bytes per pixel for calibration
|
|
|
|
exposure-time-rgb-bind:
|
|
values: -1 = automatically set by driver - if known, 0 = dis-
|
|
abled (own selection for red, green and blue), 1 = enabled (same
|
|
values for red, green and blue)
|
|
|
|
invert-shading-data:
|
|
values: -1 = automatically set by driver - if known, 0 = dis-
|
|
abled, 1 = enabled
|
|
default = -1
|
|
invert shading data before sending it back to the scanner
|
|
|
|
lamp-control-available:
|
|
values: 0 = automatically set by driver - if known, 1 = avail-
|
|
able
|
|
default = 0
|
|
|
|
gamma-lsb-padded:
|
|
values: -1 = automatically set by driver - if known, 0 = gamma
|
|
data is msb padded, 1 = gamma data is lsb padded
|
|
default = -1
|
|
|
|
handle-bad-sense-error:
|
|
values: 0 = handle as device busy, 1 = handle as ok, 2 = handle
|
|
as i/o error, 3 = ignore bad error code - continue sense handler
|
|
default = 0
|
|
|
|
scsi-maxqueue:
|
|
values: 1..# (maximum defined at compile time)
|
|
default = 2
|
|
most scsi drivers allow internal command queueing with a depth
|
|
of 2 commands. In most cases it does not mprove anything when
|
|
you increase this value. When your scsi driver does not support
|
|
any command queueing you can try to set this value to 1.
|
|
|
|
The special device name must be a generic SCSI device or a symlink to
|
|
such a device. To find out to which device your scanner is assigned
|
|
and how you have to set the permissions of that device, have a look at
|
|
sane-scsi.
|
|
|
|
|
|
</PRE>
|
|
<H2>SCSI ADAPTER TIPS</H2><PRE>
|
|
The ISA-SCSI-adapters that are shipped with some Umax-scanners are not
|
|
supported very well by Linux (I suggest not to use it), the PCI-SCSI-
|
|
adapters that come with some Umax-scanners are not supported at all (as
|
|
far as I know). On other platforms these SCSI-adapters are not sup-
|
|
ported. So you typically need to purchase another SCSI-adapter that is
|
|
supported by your platform. See the relevant hardware FAQs and HOWTOs
|
|
for your platform for more information.
|
|
|
|
The UMAX-scanners do block the scsi-bus for a few seconds while scan-
|
|
ning. It is not necessary to connect the scanner to its own SCSI-
|
|
adapter. But if you need short response time for your SCSI-harddisk
|
|
(e.g. if your computer is a file-server) or other scsi devices, I sug-
|
|
gest you use an own SCSI-adapter for your UMAX-scanner.
|
|
|
|
If you have any problems with your Umax scanner, check your scsi chain
|
|
(cable length, termination, ...).
|
|
|
|
See also: <B><A HREF="sane-scsi.5.html">sane-scsi(5)</A></B>
|
|
|
|
|
|
</PRE>
|
|
<H2>FILES</H2><PRE>
|
|
The backend configuration file:
|
|
<I>/usr/local/etc/sane.d/umax.conf</I>
|
|
|
|
The static library implementing this backend:
|
|
<I>/usr/local/lib/sane/libsane-umax.a</I>
|
|
|
|
The shared library implementing this backend:
|
|
<I>/usr/local/lib/sane/libsane-umax.so</I> (present on systems that
|
|
support dynamic loading)
|
|
|
|
|
|
</PRE>
|
|
<H2>ENVIRONMENT</H2><PRE>
|
|
<B>SANE_DEBUG_UMAX</B>
|
|
If the library was compiled with debug support enabled, this
|
|
environment variable controls the debug level for this backend.
|
|
E.g., a value of 128 requests all debug output to be printed.
|
|
Smaller levels reduce verbosity: SANE_DEBUG_UMAX values
|
|
|
|
Number Remark
|
|
|
|
0 print important errors (printed each time)
|
|
1 print errors
|
|
2 print sense
|
|
3 print warnings
|
|
4 print scanner-inquiry
|
|
5 print informations
|
|
6 print less important informations
|
|
7 print called procedures
|
|
8 print reader_process messages
|
|
10 print called sane-init-routines
|
|
11 print called sane-procedures
|
|
12 print sane infos
|
|
13 print sane option-control messages
|
|
|
|
Example:
|
|
export SANE_DEBUG_UMAX=8
|
|
|
|
|
|
</PRE>
|
|
<H2>BUGS</H2><PRE>
|
|
X-resolutions greater than 600 dpi sometimes make problems
|
|
|
|
|
|
</PRE>
|
|
<H2>SEE ALSO</H2><PRE>
|
|
<B><A HREF="sane.7.html">sane(7)</A></B>
|
|
|
|
|
|
</PRE>
|
|
<H2>AUTHOR</H2><PRE>
|
|
Oliver Rauch
|
|
|
|
|
|
</PRE>
|
|
<H2>EMAIL-CONTACT</H2><PRE>
|
|
Oliver.Rauch@Rauch-Domain.DE
|
|
|
|
sane-backends 1.0.18 29 november 2002 <B><A HREF="sane-umax.5.html">sane-umax(5)</A></B>
|
|
</PRE>
|
|
<HR>
|
|
<ADDRESS>
|
|
Man(1) output converted with
|
|
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
|
|
</ADDRESS>
|
|
</BODY>
|
|
</HTML>
|