sane-project-website/man/sane-plustek_pp.5.html

308 wiersze
13 KiB
HTML

<HTML>
<HEAD>
<TITLE>sane-plustek_pp.5</TITLE>
</HEAD>
<BODY BGCOLOR=#FFFFFF TEXT=#000000><H1 ALIGN=CENTER><IMG SRC="/images/sane.png" HEIGHT=117 WIDTH=346></H1>
<H1>sane-plustek_pp.5</H1>
<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
<B><A HREF="sane-plustek_pp.5.html">sane-plustek_pp(5)</A></B> SANE Scanner Access Now Easy <B><A HREF="sane-plustek_pp.5.html">sane-plustek_pp(5)</A></B>
</PRE>
<H2>NAME</H2><PRE>
sane-plustek_pp - SANE backend for Plustek parallel port flatbed scan-
ners
</PRE>
<H2>DESCRIPTION</H2><PRE>
The <B>sane-plustek_pp</B> library implements a SANE (Scanner Access Now Easy)
backend that provides access to Plustek ASIC 9600[1/3] and P9800[1/3]
based parallel port flatbed scanners. The access of the scanner is
either done directly by the backend or via kernel module, called pt_drv
which can be created out of the plustek_pp backend code - see also sec-
tion <B>BUILDING</B> <B>THE</B> <B>KERNEL</B> <B>MODULE</B> for further information.
</PRE>
<H2>SUPPORTED DEVICES</H2><PRE>
At present, the following scanners should work with this backend and/or
the kernel module:
<B>PLUSTEK</B> <B>SCANNERS</B>
Parallelport Model: ASIC: Properties:
---------------------- ----- ------------------------
OpticPro PT12 98003 600x1200 dpi 36bit 512Kb
OpticPro P12 98003 600x1200 dpi 36bit 512Kb
OpticPro 9636T/12000T 98001 600x1200 dpi 36bit 512Kb
OpticPro 12000P Turbo 98001 600x1200 dpi 36bit 512Kb
OpticPro 9636P+/Turbo 98001 600x1200 dpi 36bit 512Kb
OpticPro 9636P 96003 600x1200 dpi 36bit 128Kb
OpticPro 12000P/96000P 96003 600x1200 dpi 36bit 128Kb
OpticPro 1236P 96003 600x1200 dpi 30bit 128Kb
OpticPro 9600P 96003 600x1200 dpi 30bit 128Kb
OpticPro 9630P/FBIV 96003 600x1200 dpi 30bit 128Kb
OpticPro 9630PL (14") 96003 600x1200 dpi 30bit 128Kb
OpticPro A3I 96003 400x800 dpi 36bit 128Kb
OpticPro 600P/6000P 96003 300x600 dpi 30bit 32Kb
OpticPro 4831P 96003 300x600 dpi 30bit 32Kb
OpticPro 4830P/FBIII 96003 300x600 dpi 30bit 32Kb
OpticPro 4800P/FBII 96001 300x600 dpi 24bit 32Kb
<B>PRIMAX</B> <B>SCANNERS</B>
There are some scanners sold by Primax, but they are in fact Plustek
devices. These scanners are also supported. The following table will
show the relationship:
Model: Plustek Model: Remarks:
--------------------------- -------------- ------------
Colorado 4800 OpticPro 4800 not tested
Compact 4800 Direct OpticPro 600 mov=2
Compact 4800 Direct 30bit OpticPro 4830 mov=7
Compact 9600 Direct 30bit OpticPro 9630 works
<B>GENIUS</B> <B>SCANNERS</B>
The following devices are sold as Genius Scanners, but are in fact
Plustek devices. The table will show the relationship:
Model: Remarks:
--------------------------- ----------------------------
Colorpage Vivid III V2 Like P12 but has two buttons
and Wolfson DAC
<B>ARIES</B> <B>SCANNERS</B>
There's one scanner sold as Aries Scanner, but is in fact a Plustek
device. The following table will show the relationship:
Model: Plustek Model: Remarks:
--------------------------- -------------- ------------
Scan-It 4800 OpticPro 600 mov=2
<B>BrightScan</B> <B>SCANNERS</B>
There's one scanner sold as BrightScan OpticPro Scanner, this is also a
rebadged Plustek device. The following table will show the relation-
ship:
Model: Remarks:
--------------------------- ----------------------------
BrightScan OpticPro OpticPro P12
</PRE>
<H2>DEVICE NAMES</H2><PRE>
This backend works in two modes, the so called "direct-mode" and the
"kernel-mode". In direct-mode, the user-space backend is used, in ker-
nel-mode, you should have a kernel-module named pt_drv loaded. This
backends default device is:
<I>0x378</I>
This "default device" will be used, if no configuration file can be
found. It is rather the base address of the parallel port on i386
machines.
As the backend supports up to four devices, it is possible to specify
them in the configuration file
<I>/usr/local/etc/sane.d/plustek</I><B>_</B><I>pp.conf</I>
See the plustek_pp.conf file for examples.
</PRE>
<H2>CONFIGURATION</H2><PRE>
Beside the kernel-module options, which are described below, you need
to enable the parallel port device in the configuration file
<I>/usr/local/etc/sane.d/plustek</I><B>_</B><I>pp.conf</I>
For a proper setup, you will need at least two entries:
<I>[direct]</I>
<I>device</I> <I>0x378</I>
or
<I>[kernel]</I>
<I>device</I> <I>/dev/pt</I><B>_</B><I>drv</I>
<I>direct</I> tells the backend, that the following devicename (here
<I>/dev/pt</I><B>_</B><I>drv</I> ) has to be interpreted as parallel port scanner device.
To have this device, you will need to setup the kernel module. As the
driver is a loadable kernel module, it is configured by invoking insmod
with the appropriate parameters or appending the options to the file
<B>/etc/conf.modules</B>
<B>The</B> <B>Options:</B>
lampoff=lll
The value <I>lll</I> tells the driver, after how many seconds to
switch-off the lamp(s). The default value is 180. 0 will dis-
able this feature.
<B>HINT:</B> Do not use a value that is too small, because often
switching on/off the lamps will reduce their lifetime.
port=ppp
<I>ppp</I> specifies the port base address, where the scanner is con-
nected to. The default value is 0x378 which normaly is standard.
warmup=www
<I>www</I> specifies the time in seconds, how long a lamp has to be on,
until the driver will start to scan. The default value is 30.
lOffonEnd=e
<I>e</I> specifies the behaviour when unloading the driver, 1 --&gt;
switch lamps off, 0 --&gt; do not change lamp status
slowIO=s
<I>s</I> specifies which I/O functions the driver should use, 1 --&gt; use
delayed functions, 0 --&gt; use the non-delayed ones
forceMode=fm
<I>fm</I> specifies port mode which should be used, 0 --&gt; autodetec-
tion, 1 --&gt; use SPP mode and 2 --&gt; use EPP mode
mov=m
<I>m</I> =0 - default: no override
<I>m</I> =1 - OpticPro 9630PL override (works if OP9630
has been detected) forces legal size (14")
<I>m</I> =2 - Primax 4800Direct override (works if OP600
has been detected) swaps red/green color
<I>m</I> =3 - OpticPro 9636 override (works if OP9636 has
been detected) disables backends
transparency/negativ capabilities
<I>m</I> =4 - OpticPro 9636P override (works if OP9636 has
been detected) disables backends
transparency/negativ capabilities
<I>m</I> =5 - OpticPro A3I override (works if OP12000 has
been detected) enables A3 scanning
<I>m</I> =6 - OpticPro 4800P override (works if OP600
has been detected) swaps red/green color
<I>m</I> =7 - Primax 4800Direct 30bit override (works if OP4830
has been detected)
Sample entry for file <B>/etc/modules.conf</B> :
<I>alias</I> <I>char-major-40</I> <I>pt</I><B>_</B><I>drv</I>
<I>pre-install</I> <I>pt</I><B>_</B><I>drv</I> <I>modprobe</I> <I>-k</I> <I>parport</I>
<I>options</I> <I>pt</I><B>_</B><I>drv</I> <I>lampoff=180</I> <I>warmup=15</I> <I>port=0x378</I> <I>lOffonEnd=0</I> <I>mov=0</I>
<I>slowIO=0</I> <I>forceMode=0</I>
For multidevice support, simply add values separated by commas to the
different options
<I>options</I> <I>pt</I><B>_</B><I>drv</I> <I>port=0x378,0x278</I> <I>mov=0,4</I> <I>slowIO=0,1</I> <I>forceMode=0,1</I>
Remember to call depmod after changing /etc/conf.modules.
<B>PARALLEL</B> <B>PORT</B> <B>MODES</B>
The current driver works best, when the parallel port has been set to
EPP-mode. When detecting any other mode such as ECP or PS/2 the driver
tries to set to a faster, supported mode. If this fails, it will use
the SPP mode, as this mode should work with all Linux supported paral-
lel ports.
Former Plustek scanner models (4830, 9630) supplied a ISA parallel port
adapter card. This card is <B>not</B> supported by the driver.
The ASIC 96001/3 based models have sometimes trouble with high resolu-
tion modes. If you encounter sporadic corrupted images (parts dupli-
cated or shifted horizontally) kill all other applications before scan-
ning and (if sufficient memory available) disable swapping.
See the plustek_pp.conf file for examples.
</PRE>
<H2>BUILDING THE KERNEL MODULE</H2><PRE>
As mentioned before, the plustek_pp backend code can also be compiled
and installed as linux kernel module...
</PRE>
<H2>FILES</H2><PRE>
<I>/usr/local/etc/sane.d/plustek</I><B>_</B><I>pp.conf</I>
The backend configuration file
<I>/usr/local/lib/sane/libsane-plustek</I><B>_</B><I>pp.a</I>
The static library implementing this backend.
<I>/usr/local/lib/sane/libsane-plustek</I><B>_</B><I>pp.so</I>
The shared library implementing this backend (present on systems
that support dynamic loading).
<I>/lib/modules/&lt;Kernel-Version&gt;/misc/pt</I><B>_</B><I>drv.o</I>
The Linux Kernelmodule.
</PRE>
<H2>CONTACT AND BUG-REPORTS</H2><PRE>
Please send any information and bug-reports to:
<B>Plustek</B> <B>Driver</B> <B>Mailing</B> <B>List</B> <B>&lt;plustek@linuxhacker.org&gt;</B>
or directly to:
<B>Gerhard</B> <B>Jaeger</B> <B>&lt;gerhard@gjaeger.de&gt;</B>
Additional info and hints can be obtained from our
Mailing-List archive at:
<B>http://www.linuxhacker.org/cgi-bin/ezmlm-cgi/3</B>
or directly from the projects' homepage at:
<B>http://www.gjaeger.de/scanner/plustek.html</B>
To obtain debug messages from the backend, please set the environment-
variable <I>SANE</I><B>_</B><I>DEBUG</I><B>_</B><I>PLUSTEK</I> before calling your favorite scan-frontend
(i.e. xscanimage).
<B>i.e.:</B> <B>export</B> <B>SANE_DEBUG_PLUSTEK_PP=20</B> <B>;</B> <B>xscanimage</B>
The value controls the verbosity of the backend.
</PRE>
<H2>KNOWN BUGS & RESTRICTIONS</H2><PRE>
* The Halftoning works, but the quality is poor
* Printers (especially HP models) will start to
print during scanning. This in fact is a problem
to other printers too, using bidirectional protocol
(see www.plustek.com (TAIWAN) page for further details)
* The driver does not support these manic scalings up
to 16 times the physical resolution. The only scaling
is done on resolutions between the physical resolution
of the CDD-sensor and the stepper motor i.e. you have a
600x1200 dpi scanner and you are scanning using 800dpi,
so scaling is necesary, because the sensor only delivers
600dpi but the motor is capable to perform 800dpi steps.
* On some devices, the pictures seems to be bluished
ASIC 98001 based models:
* The 300dpi transparency and negative mode does not work
correctly.
* There is currently no way to distinguish a model with
and without transpareny unit.
* The scanned images seem to be too dark (P9636T)
ASIC 96003/1 based models:
* 30bit mode is currently not supported.
* On low-end systems and under heavy system load, the
driver will loose data, this might causes the sensor
to hit the scan-bed and/or the picture is corrupted.
* The scanspeed on 600x1200 dpi models is slow.
* The scanquality of the A3I is poor
sane-backends 1.0.12-cvs 24 September 2003 <B><A HREF="sane-plustek_pp.5.html">sane-plustek_pp(5)</A></B>
</PRE>
<HR>
<ADDRESS>
Man(1) output converted with
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
</ADDRESS>
</BODY>
</HTML>