Medion MD 6190
Tevion MD 6190
Medion MD 41260
Medion MD 41985
USB
0x0461
0x037b (MD 6190, MD 41260, MD 41985) / 0x0392 (MD 6190)
(for the 0x037b type, MD 6190 and MD 41260) USB-Chip: Ali M5623 0330 D1 TH07 Motor-Driver: ST L6219 DS ADC: WM 8196 CDS Memory: ESMT M12L16161A
(for the 0x037b type, MD 41985) USB-Chip: Ali M5623 0352 D1 TH07 Motor-Driver: ST L6219 0S ADC: WM 8199 CDS Memory: ESMT M12L16161A DC-DC Converter: UTC MC34063A
Martin Haag intends to write a backend for these scanners. His website will contain information on the status of this project.
The 41260 comes with a transparency adapter. The 6190 is the same scanner but doesn't have a TA. The 6190 seems to use two different product ids: 0x037b and 0x0392.
The vendor id is Primax. The .ini file of the Windows driver contains the following entries that at least in Part are Primax scanners: G2E_600, G2E_600_BT, G2E_300, G2E_300_OVER, G3_600, G3_300, OT_8600, 8100, G6_600.
There is some indication that the following vendor/product ids may use the same or similar chips: VID_0461&PID_0374, 0x0461/0x0347, 0x0461/0x0363, 0x0461/0x0367, 0x0461/0x0365, 0x04A7/0x0224, 0x04A7/0x0226, 0x04A7/0x0225, 0x04A7/0x0229, 0x0461/0x0377, 0x0461/0x0371, 0x04A7/0x022C, 0x0461/0x0378, 0x04A7/0x0229, 0x04A7/0x022A, 0x0461/0x0375, 0x0402/0x5623, 0x0461/0x037B, 0x0461/0x0392, 0x04A7/0x0362.
Cheaply available in european supermarkets
Medion MD 6190 (0x037b)
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=037b Rev= 1.01
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
Another Medion MD 6190 (0x037b):
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=037b Rev= 1.01
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
sane-find-scanner -v -v
<device descriptor of 0x0461/0x037b at 001:002 (USB Scanner)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x0461
idProduct 0x037B
bcdDevice 1.01
iManufacturer 0 ()
iProduct 1 (USB Scanner)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 16 ms
bRefresh 0
bSynchAddress 0
found USB scanner (vendor=0x0461, product=0x037b [USB Scanner]) at libusb:001:002
Medion MD 6190 (0x037b):
05: USB 302.0: 0000 Unclassified device
[Created at usb.113]
Unique ID: B3Fu.XGvFcBBtoP6
Parent ID: B3Fu.OVhmADG722A
Hardware Class: unknown
Model: "Colorado USB Scanner"
Hotplug: USB
Vendor: usb 0x0461 "Colorado"
Device: usb 0x037b
SubDevice: "USB Scanner"
Revision: "1.01"
USB GUID: 0461037b0000000000000000
USB Device status: no driver loaded
Speed: 1.5 Mbps
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #4 (Hub)
Medion MD 41260:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=037b Rev= 1.01
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
<device descriptor of 0x0461/0x037b at 002:002>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x0461
idProduct 0x037B
bcdDevice 1.01
iManufacturer 0 ()
iProduct 1 ((null))
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 16 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bNumEndpoints = 3)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x110)
checking for MA-1509 ...
this is not a MA-1509 (bEndpointAddress = 0x81, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
checking for LM983[1,2,3] ...
this is not a LM983x (bDeviceSubClass = 0xff)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
<Couldn't determine the type of the USB chip>
Tevion MD 6190 (0x0392)
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=0392 Rev= 2.00
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.
$Date$ $Author$