Plustek OpticPro S12
Plustek OpticPro ST12
USB
0x07b3
0x040b / 0x0600
GT6816 (0x040b) / GL646 (0x0600).
These scanners use two different product ids and therefore have different hardware. The scanner with product id 0x040b uses a GT6816 chip and is supported by the gt68xx backend. Scanners with product id 0x0600 use a gl646 chip which may be supported by the genesys backend in future.
Product id 0x040b: <device descriptor of 0x07b3/0x040b at 002:003 (600DPI USB Scanner)> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x07B3 idProduct 0x040B bcdDevice 5.07 iManufacturer 0 () iProduct 1 (600DPI USB Scanner) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 192 (Self-powered) MaxPower 100 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... <This USB chip looks like a GT-6816> found USB scanner (vendor=0x07b3, product=0x040b [600DPI USB Scanner], chip=GT-6816) at libusb:002:003 Product id 0x0600: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=07b3 ProdID=0600 Rev= 0.00 S: Manufacturer=PLUSTEK INC S: Product=USB SCANNER C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms device descriptor of 0x07b3/0x0600 at 003:003 (PLUSTEK INC USB SCANNER)> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x07B3 idProduct 0x0600 bcdDevice 0.00 iManufacturer 10 (PLUSTEK INC) iProduct 11 (USB SCANNER) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 48 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 16 bInterfaceSubClass 1 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 8 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 16) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 16) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = 0) checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = 0) checking for LM983[1,2,3] ... this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 16) checking for GL646 ... <This USB chip looks like a GL646> found USB scanner (vendor=0x07b3 [PLUSTEK INC], product=0x0600 [USB SCANNER], chip=GL646) at libusb:003:003
If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.
If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.
Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.
$Date$ $Author$