Scanners not supported by SANE

Manufacturer and model

Microtek ScanMaker i320

Bus type

USB

Vendor ID

0x05da

Product ID

0x30e6

Chipset

Comments

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 
P: Vendor=05da ProdID=30e6 Rev= 1.00 
S: Manufacturer=Prolific Technology Inc. 
S: Product=USB 2.0 Scanner Controller 
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA 
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) 
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms 
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms 
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=3ms

<device descriptor of 0x05da/0x30e6 at 001:002 (Prolific Technology Inc. USB 2.0 Scanner Controller)> 
bLength 18 
bDescriptorType 1 
bcdUSB 2.00 
bDeviceClass 0 
bDeviceSubClass 0 
bDeviceProtocol 0 
bMaxPacketSize0 64 
idVendor 0x05DA 
idProduct 0x30E6 
bcdDevice 1.00 
iManufacturer 1 (Prolific Technology Inc.) 
iProduct 2 (USB 2.0 Scanner Controller) 
iSerialNumber 0 () 
bNumConfigurations 1 
<configuration 0> 
bLength 9 
bDescriptorType 2 
wTotalLength 39 
bNumInterfaces 1 
bConfigurationValue 1 
iConfiguration 0 () 
bmAttributes 192 (Self-powered) 
MaxPower 100 mA 
<interface 0> 
<altsetting 0> 
bLength 9 
bDescriptorType 4 
bInterfaceNumber 0 
bAlternateSetting 0 
bNumEndpoints 3 
bInterfaceClass 255 
bInterfaceSubClass 255 
bInterfaceProtocol 255 
iInterface 0 () 
<endpoint 0> 
bLength 7 
bDescriptorType 5 
bEndpointAddress 0x01 (out 0x01) 
bmAttributes 2 (bulk) 
wMaxPacketSize 64 
bInterval 0 ms 
bRefresh 0 
bSynchAddress 0 
<endpoint 1> 
bLength 7 
bDescriptorType 5 
bEndpointAddress 0x82 (in 0x02) 
bmAttributes 2 (bulk) 
wMaxPacketSize 64 
bInterval 0 ms 
bRefresh 0 
bSynchAddress 0 
<endpoint 2> 
bLength 7 
bDescriptorType 5 
bEndpointAddress 0x83 (in 0x03) 
bmAttributes 3 (interrupt) 
wMaxPacketSize 1 
bInterval 3 ms 
bRefresh 0 
bSynchAddress 0 
<trying to find out which USB chip is used> 
checking for GT-6801 ... 
this is not a GT-6801 (bDeviceClass = 0) 
checking for GT-6816 ... 
this is not a GT-6816 (bcdUSB = 0x200) 
checking for MA-1017 ... 
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) 
checking for MA-1015 ... 
this is not a MA-1015 (bDeviceClass = 0) 
checking for MA-1509 ... 
this is not a MA-1509 (bDeviceClass = 0) 
checking for LM983[1,2,3] ... 
this is not a LM983x (bcdUSB = 0x200) 
checking for GL646 ... 
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) 
checking for GL646_HP ... 
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) 
checking for GL660+GL646 ... 
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) 
checking for GL841 ... 
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) 
checking for ICM532B ... 
check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 255) 
<Couldn't determine the type of the USB chip> 
found USB scanner (vendor=0x05da [Prolific Technology Inc.], product=0x30e6 [USB 2.0 Scanner Controller]) at libusb:001:002
    

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.

Links


SANE homepage
Contact

$Date$ $Author$