Scanners not supported by SANE

Manufacturer and model

Hewlett-Packard Scanjet 2300c

Bus type

USB

Vendor ID

0x03f0

Product ID

0x0901

Chipset

GL646_HP
On the chip these are the no's: fzc1n20gj and m11b41a

More chip information:
There are two chips inside the scanner.

The first chip says:

EliteMT                   100MHz
M11B416256A         -25J
DZC1HC695           0215

The other one says:

26-00122-03B
0220FF29F-09

Comments

This scanner may be supported by the Genesys backend, when it's finished.

Someone else wants to write a backend.

Two other people wanted to start a backend. They don't seem to be active any longer, however. See these posts on sane-devel: 1st post, 2nd post, 3rd post.

Looks very similar to the HP ScanJet 2400c.

Output of /proc/bus/usb/devices or sane-find-scanner -v -v

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=0901 Rev= 1.01
S:  Manufacturer=Hewlett-Packard
S:  Product=hp scanjet scanner
S:  SerialNumber=CN2BXS103X
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 48mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=8ms


bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          255
bDeviceSubClass       255
bDeviceProtocol       255
bMaxPacketSize0       8
idVendor              0x03F0
idProduct             0x0901
bcdDevice             1.01
iManufacturer         1 (Hewlett-Packard)
iProduct              2 (hp scanjet scanner)
iSerialNumber         12 (CN2BJS422H)
bNumConfigurations    1
 
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             48 mA
  
   
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         8 ms
    bRefresh          0
    bSynchAddress     0
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0901 [hp scanjet scanner]) at libusb:001:003

Want to add or correct information?

If anything is wrong or missing on this page please file a bug report or use the the form for adding an unsupported device.

If you own an unsupported scanner, please send as much information as possible. Especially the output of sane-find-scanner -v -v and/or cat /proc/scsi/scsi (for SCSI scanners) or cat /proc/bus/usb/devices (for USB scanners) can help. If you dare to open the scanner, have a look at the text that's printed on the chips. That may help to identify the chipset. If you know that the scanner is similar to another one (e.g. supported by the same Windows driver), please also mention this fact.

Information for Manufacturers

Are you a manufacturer or vendor of scanners and one of your scanners is not supported by SANE yet? In this case please have a look at our information for manufacturers.