Added sane-find-scanner output.

unsupported/mustek-bearpaw-2448-cu-pro.html

@@ -45,6 +45,10 @@ L6219 - well known stepper motor controller.
     <p>
       Similar to the Mustek BearPaw 2448TA Pro?
     </p>
+    <p>
+      On the case of the scanner the following is written: "BearPaw 2448CU Pro
+      MODEL NUMBER: BP 2400CU Plus"
+    </p>
     <h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
     <pre>
 T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
@@ -68,6 +72,97 @@ I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us
+
+&lt;device descriptor of 0x055f/0x0408 at 004:002 (Hewlett-Packard.         
+hp scanjet                )&gt;
+bLength               18
+bDescriptorType       1
+bcdUSB                2.00
+bDeviceClass          0
+bDeviceSubClass       0
+bDeviceProtocol       0
+bMaxPacketSize0       64
+idVendor              0x055F
+idProduct             0x0408
+bcdDevice             1.00
+iManufacturer         1 (Hewlett-Packard.        )
+iProduct              2 (hp scanjet                )
+iSerialNumber         0 ()
+bNumConfigurations    1
+ &lt;configuration 0&gt;
+ bLength              9
+ bDescriptorType      2
+ wTotalLength         39
+ bNumInterfaces       1
+ bConfigurationValue  1
+ iConfiguration       0 ()
+ bmAttributes         192 (Self-powered)
+ MaxPower             100 mA
+  &lt;interface 0&gt;
+   &lt;altsetting 0&gt;
+   bLength            9
+   bDescriptorType    4
+   bInterfaceNumber   0
+   bAlternateSetting  0
+   bNumEndpoints      3
+   bInterfaceClass    255
+   bInterfaceSubClass 255
+   bInterfaceProtocol 255
+   iInterface         0 ()
+    &lt;endpoint 0&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x01 (out 0x01)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    512
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 1&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x82 (in 0x02)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    512
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 2&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x83 (in 0x03)
+    bmAttributes      3 (interrupt)
+    wMaxPacketSize    1
+    bInterval         3 ms
+    bRefresh          0
+    bSynchAddress     0
+
+&lt;trying to find out which USB chip is used&gt;
+    checking for GT-6801 ...
+    this is not a GT-6801 (bDeviceClass = 0)
+    checking for GT-6816 ...
+    this is not a GT-6816 (bcdUSB = 0x200)
+    checking for MA-1017 ...
+    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for MA-1015 ...
+    this is not a MA-1015 (bDeviceClass = 0)
+    checking for MA-1509 ...
+    this is not a MA-1509 (bDeviceClass = 0)
+    checking for LM983[1,2,3] ...
+    this is not a LM983x (bcdUSB = 0x200)
+    checking for GL646 ...
+    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for GL646_HP ...
+    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for GL660+GL646 ...
+    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for GL841 ...
+    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for ICM532B ...
+  check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 255)
+&lt;Couldn't determine the type of the USB chip&gt;
+
+found USB scanner (vendor=0x055f [Hewlett-Packard.        ], product=0x0408 [hp scanjet                ]) at libusb:004:002
     </pre>
     
     <h1>Want to add or correct information?</h1>