+ Epson Stylus Photo RX500 +
++ USB +
++ 0x04b8 +
++ 0x0807 +
++
++ Also a printer. +
++T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=04b8 ProdID=0807 Rev= 1.00 +S: Manufacturer=EPSON +S: Product=USB2.0 MFP(Hi-Speed) +S: SerialNumber=L99040309180658190 +C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) +E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none) +E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) +E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms + +Bus 001 Device 003: ID 04b8:0807 Seiko Epson Corp. +Device Descriptor: + bLength 18 + bDescriptorType 1 + bcdUSB 2.00 + bDeviceClass 0 Interface + bDeviceSubClass 0 + bDeviceProtocol 0 + bMaxPacketSize0 64 + idVendor 0x04b8 Seiko Epson Corp. + idProduct 0x0807 + bcdDevice 1.00 + iManufacturer 1 EPSON + iProduct 2 USB2.0 MFP(Hi-Speed) + iSerial 3 L99040309180658190 + bNumConfigurations 1 + Configuration Descriptor: + bLength 9 + bDescriptorType 2 + wTotalLength 78 + bNumInterfaces 3 + bConfigurationValue 1 + iConfiguration 4 + bmAttributes 0xc0 + Self Powered + MaxPower 2mA + Interface Descriptor: + bLength 9 + bDescriptorType 4 + bInterfaceNumber 0 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 255 Vendor Specific Class + bInterfaceSubClass 255 Vendor Specific Subclass + bInterfaceProtocol 255 Vendor Specific Protocol + iInterface 5 EPSON Scanner Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x01 EP 1 OUT + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x82 EP 2 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Interface Descriptor: + bLength 9 + bDescriptorType 4 + bInterfaceNumber 1 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 7 Printer + bInterfaceSubClass 1 Printer + bInterfaceProtocol 2 Bidirectional + iInterface 6 USB2.0 Printer + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x04 EP 4 OUT + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x85 EP 5 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Interface Descriptor: + bLength 9 + bDescriptorType 4 + bInterfaceNumber 2 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 8 Mass Storage + bInterfaceSubClass 6 SCSI + bInterfaceProtocol 80 Bulk (Zip) + iInterface 7 USB2.0 Mass Storage + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x07 EP 7 OUT + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x88 EP 8 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 512 + bInterval 0 + Language IDs: (length=4) + 0409 English(US) + +# sane-find-scanner -v -v + +[...] +<device descriptor of 0x04b8/0x0807 at 001:003 (EPSON USB2.0 MFP(Hi-Speed))> +bLength 18 +bDescriptorType 1 +bcdUSB 2.00 +bDeviceClass 0 +bDeviceSubClass 0 +bDeviceProtocol 0 +bMaxPacketSize0 64 +idVendor 0x04B8 +idProduct 0x0807 +bcdDevice 1.00 +iManufacturer 1 (EPSON) +iProduct 2 (USB2.0 MFP(Hi-Speed)) +iSerialNumber 3 (L99040309180658190) +bNumConfigurations 1 + <configuration 0> + bLength 9 + bDescriptorType 2 + wTotalLength 78 + bNumInterfaces 3 + bConfigurationValue 1 + iConfiguration 4 (USB2.0 MFP(Hi-Speed)) + bmAttributes 192 (Self-powered) + MaxPower 2 mA <interface 0> + <altsetting 0> + bLength 9 + bDescriptorType 4 + bInterfaceNumber 0 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 255 + bInterfaceSubClass 255 + bInterfaceProtocol 255 + iInterface 5 (EPSON Scanner) + <endpoint 0> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x01 (out 0x01) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + <endpoint 1> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x82 (in 0x02) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + <interface 1> + <altsetting 0> + bLength 9 + bDescriptorType 4 + bInterfaceNumber 1 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 7 + bInterfaceSubClass 1 + bInterfaceProtocol 2 + iInterface 6 (USB2.0 Printer) + <endpoint 0> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x04 (out 0x04) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + <endpoint 1> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x85 (in 0x05) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + <interface 2> + <altsetting 0> + bLength 9 + bDescriptorType 4 + bInterfaceNumber 2 + bAlternateSetting 0 + bNumEndpoints 2 + bInterfaceClass 8 + bInterfaceSubClass 6 + bInterfaceProtocol 80 + iInterface 7 (USB2.0 Mass Storage) + <endpoint 0> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x07 (out 0x07) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + <endpoint 1> + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x88 (in 0x08) + bmAttributes 2 (bulk) + wMaxPacketSize 512 + bInterval 0 ms + bRefresh 0 + bSynchAddress 0 + +<trying to find out which USB chip is used> + checking for GT-6801 ... + this is not a GT-6801 (bDeviceClass = 0) + checking for GT-6816 ... + this is not a GT-6816 (bcdUSB = 0x200) + checking for MA-1017 ... + this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) + checking for MA-1015 ... + this is not a MA-1015 (bDeviceClass = 0) + checking for MA-1509 ... + this is not a MA-1509 (bDeviceClass = 0) + checking for LM983[1,2,3] ... + this is not a LM983x (bcdUSB = 0x200) + checking for GL646 ... + this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) + checking for GL660+GL646 ... + this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) +<Couldn't determine the type of the USB chip> + +found USB scanner (vendor=0x04b8 [EPSON], product=0x0807 [USB2.0 MFP(Hi-Speed)]) at libusb:001:003 ++ +
+ If anything is wrong or missing on this page please file a bug report + or use the the + form for adding an unsupported device. +
++ If you own an unsupported scanner, please send as much information as + possible. Especially the output of sane-find-scanner -v -v + and/or cat /proc/scsi/scsi (for SCSI scanners) or cat + /proc/bus/usb/devices (for USB scanners) can help. If you dare to + open the scanner, have a look at the text that's printed on the + chips. That may help to identify the chipset. If you know that the + scanner is similar to another one (e.g. supported by the same Windows + driver), please also mention this fact. +
+ ++ Are you a manufacturer or vendor of scanners and one of your scanners is + not supported by SANE yet? In this case please have a look at our information for manufacturers. +
+ +
+ SANE homepage
+ Contact
+
+ $Date$ $Author$ +
+ + + diff --git a/unsupported/hp-scanjet-3970c.html b/unsupported/hp-scanjet-3970c.html index 65f40abf..f9b8b682 100644 --- a/unsupported/hp-scanjet-3970c.html +++ b/unsupported/hp-scanjet-3970c.html @@ -49,6 +49,19 @@ I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=250ms + +Yet another one (slightly different): +T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=03f0 ProdID=2305 Rev= 1.00 +S: Manufacturer=hewlett packard +S: Product=hp scanjet +S: SerialNumber=SCN387T10DY7Y +C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) +E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=256ms+ Medion MD 6190 +
++ USB +
++ 0x0461 +
++ 0x037b +
++
++ Cheaply available in european supermarkets +
++T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 +D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 +P: Vendor=0461 ProdID=037b Rev= 1.01 +S: Product=USB Scanner +C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) +E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms +E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms ++ +
+ If anything is wrong or missing on this page please file a bug report + or use the the + form for adding an unsupported device. +
++ If you own an unsupported scanner, please send as much information as + possible. Especially the output of sane-find-scanner -v -v + and/or cat /proc/scsi/scsi (for SCSI scanners) or cat + /proc/bus/usb/devices (for USB scanners) can help. If you dare to + open the scanner, have a look at the text that's printed on the + chips. That may help to identify the chipset. If you know that the + scanner is similar to another one (e.g. supported by the same Windows + driver), please also mention this fact. +
+ ++ Are you a manufacturer or vendor of scanners and one of your scanners is + not supported by SANE yet? In this case please have a look at our information for manufacturers. +
+ +
+ SANE homepage
+ Contact
+
+ $Date$ $Author$ +
+ + + diff --git a/unsupported/microtek-scanmaker-4800.html b/unsupported/microtek-scanmaker-4800.html index 92a25c7b..e52677db 100644 --- a/unsupported/microtek-scanmaker-4800.html +++ b/unsupported/microtek-scanmaker-4800.html @@ -14,18 +14,31 @@+ Microtek Scanmaker 4800 +
+ USB +
+ 0x05da +
+ 0x030cf +
+ Uses the SQ + Scan08 chip. That's written on the chip: "SCAN08 541-30-000008 0209-0107 E10B7-000". +
++ Looks very similar to the Scanmaker + 3800 which is reported to use the same chip. +
@@ -38,6 +51,70 @@ I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=3ms
+
+<device descriptor of 0x05da/0x30cf at 001:002 (ScanMaker 4800)>
+bLength 18
+bDescriptorType 1
+bcdUSB 1.10
+bDeviceClass 255
+bDeviceSubClass 255
+bDeviceProtocol 255
+bMaxPacketSize0 8
+idVendor 0x05DA
+idProduct 0x30CF
+bcdDevice 1.00
+iManufacturer 0 ()
+iProduct 2 (ScanMaker 4800)
+iSerialNumber 0 ()
+bNumConfigurations 1
+ <configuration 0>
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 39
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0 ()
+ bmAttributes 224 (Self-poweredRemote Wakeup)
+ MaxPower 100 mA
+ <interface 0>
+ <altsetting 0>
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 3
+ bInterfaceClass 255
+ bInterfaceSubClass 255
+ bInterfaceProtocol 255
+ iInterface 0 ()
+ <endpoint 0>
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 (in 0x01)
+ bmAttributes 2 (bulk)
+ wMaxPacketSize 64
+ bInterval 0 ms
+ bRefresh 0
+ bSynchAddress 0
+ <endpoint 1>
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 (out 0x02)
+ bmAttributes 2 (bulk)
+ wMaxPacketSize 64
+ bInterval 0 ms
+ bRefresh 0
+ bSynchAddress 0
+ <endpoint 2>
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x83 (in 0x03)
+ bmAttributes 3 (interrupt)
+ wMaxPacketSize 1
+ bInterval 3 ms
+ bRefresh 0
+ bSynchAddress 0
+found USB scanner (vendor=0x05da, product=0x30cf [ScanMaker 4800]) at libusb:001:002'
+ Relisys Eclipse 1200U +
++ USB +
++ 0x0475 +
++ 0x0103 +
++
++ Type nr. VM6599 +
++Bus 002 Device 002: ID 0475:0103 Relisys/Teco Information System + Language IDs: none (cannot get min. string descriptor; got len=-1, error=110:Connection timed out) +Device Descriptor: + bLength 18 + bDescriptorType 1 + bcdUSB 1.00 + bDeviceClass 255 Vendor Specific Class + bDeviceSubClass 0 + bDeviceProtocol 255 + bMaxPacketSize0 8 + idVendor 0x0475 Relisys/Teco Information System + idProduct 0x0103 + bcdDevice 1.00 + iManufacturer 0 + iProduct 0 + iSerial 0 + bNumConfigurations 1 + Configuration Descriptor: + bLength 9 + bDescriptorType 2 + wTotalLength 39 + bNumInterfaces 1 + bConfigurationValue 1 + iConfiguration 0 + bmAttributes 0x80 + MaxPower 500mA + Interface Descriptor: + bLength 9 + bDescriptorType 4 + bInterfaceNumber 0 + bAlternateSetting 0 + bNumEndpoints 3 + bInterfaceClass 255 Vendor Specific Class + bInterfaceSubClass 255 Vendor Specific Subclass + bInterfaceProtocol 255 Vendor Specific Protocol + iInterface 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x01 EP 1 OUT + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 8 + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x82 EP 2 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 8 + bInterval 0 + Endpoint Descriptor: + bLength 7 + bDescriptorType 5 + bEndpointAddress 0x83 EP 3 IN + bmAttributes 2 + Transfer Type Bulk + Synch Type none + wMaxPacketSize 64 + bInterval 0 + Language IDs: none (cannot get min. string descriptor; got len=-1, error=110:Connection timed out) ++ +
+ If anything is wrong or missing on this page please file a bug report + or use the the + form for adding an unsupported device. +
++ If you own an unsupported scanner, please send as much information as + possible. Especially the output of sane-find-scanner -v -v + and/or cat /proc/scsi/scsi (for SCSI scanners) or cat + /proc/bus/usb/devices (for USB scanners) can help. If you dare to + open the scanner, have a look at the text that's printed on the + chips. That may help to identify the chipset. If you know that the + scanner is similar to another one (e.g. supported by the same Windows + driver), please also mention this fact. +
+ ++ Are you a manufacturer or vendor of scanners and one of your scanners is + not supported by SANE yet? In this case please have a look at our information for manufacturers. +
+ +
+ SANE homepage
+ Contact
+
+ $Date$ $Author$ +
+ + +