+ Microtek ScanMaker i320 +
++ USB +
++ 0x05da +
++ 0x30e6 +
++
++
++T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 +D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 +P: Vendor=05da ProdID=30e6 Rev= 1.00 +S: Manufacturer=Prolific Technology Inc. +S: Product=USB 2.0 Scanner Controller +C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA +I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) +E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms +E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms +E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=3ms + +<device descriptor of 0x05da/0x30e6 at 001:002 (Prolific Technology Inc. USB 2.0 Scanner Controller)> +bLength 18 +bDescriptorType 1 +bcdUSB 2.00 +bDeviceClass 0 +bDeviceSubClass 0 +bDeviceProtocol 0 +bMaxPacketSize0 64 +idVendor 0x05DA +idProduct 0x30E6 +bcdDevice 1.00 +iManufacturer 1 (Prolific Technology Inc.) +iProduct 2 (USB 2.0 Scanner Controller) +iSerialNumber 0 () +bNumConfigurations 1 +<configuration 0> +bLength 9 +bDescriptorType 2 +wTotalLength 39 +bNumInterfaces 1 +bConfigurationValue 1 +iConfiguration 0 () +bmAttributes 192 (Self-powered) +MaxPower 100 mA +<interface 0> +<altsetting 0> +bLength 9 +bDescriptorType 4 +bInterfaceNumber 0 +bAlternateSetting 0 +bNumEndpoints 3 +bInterfaceClass 255 +bInterfaceSubClass 255 +bInterfaceProtocol 255 +iInterface 0 () +<endpoint 0> +bLength 7 +bDescriptorType 5 +bEndpointAddress 0x01 (out 0x01) +bmAttributes 2 (bulk) +wMaxPacketSize 64 +bInterval 0 ms +bRefresh 0 +bSynchAddress 0 +<endpoint 1> +bLength 7 +bDescriptorType 5 +bEndpointAddress 0x82 (in 0x02) +bmAttributes 2 (bulk) +wMaxPacketSize 64 +bInterval 0 ms +bRefresh 0 +bSynchAddress 0 +<endpoint 2> +bLength 7 +bDescriptorType 5 +bEndpointAddress 0x83 (in 0x03) +bmAttributes 3 (interrupt) +wMaxPacketSize 1 +bInterval 3 ms +bRefresh 0 +bSynchAddress 0 +<trying to find out which USB chip is used> +checking for GT-6801 ... +this is not a GT-6801 (bDeviceClass = 0) +checking for GT-6816 ... +this is not a GT-6816 (bcdUSB = 0x200) +checking for MA-1017 ... +this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) +checking for MA-1015 ... +this is not a MA-1015 (bDeviceClass = 0) +checking for MA-1509 ... +this is not a MA-1509 (bDeviceClass = 0) +checking for LM983[1,2,3] ... +this is not a LM983x (bcdUSB = 0x200) +checking for GL646 ... +this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) +checking for GL646_HP ... +this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) +checking for GL660+GL646 ... +this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) +checking for GL841 ... +this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) +checking for ICM532B ... +check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 255) +<Couldn't determine the type of the USB chip> +found USB scanner (vendor=0x05da [Prolific Technology Inc.], product=0x30e6 [USB 2.0 Scanner Controller]) at libusb:001:002 ++ +
+ If anything is wrong or missing on this page please file a bug report + or use the the + form for adding an unsupported device. +
++ If you own an unsupported scanner, please send as much information as + possible. Especially the output of sane-find-scanner -v -v + and/or cat /proc/scsi/scsi (for SCSI scanners) or cat + /proc/bus/usb/devices (for USB scanners) can help. If you dare to + open the scanner, have a look at the text that's printed on the + chips. That may help to identify the chipset. If you know that the + scanner is similar to another one (e.g. supported by the same Windows + driver), please also mention this fact. +
+ ++ Are you a manufacturer or vendor of scanners and one of your scanners is + not supported by SANE yet? In this case please have a look at our information for manufacturers. +
+ +
+ SANE homepage
+ Contact
+
+ $Date$ $Author$ +
+ + +