Added sane-find-scanner output.

unsupported/artec_1236usb.html

@@ -36,30 +36,105 @@
     </p>
     <h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
     <pre>
-T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
-D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
+T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
+D:  Ver= 1.00 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=05d8 ProdID=4001 Rev= 1.00
 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=500mA
-I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
+I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(&gt;ifc ) Sub=00 Prot=00 Driver=(none)
 E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
 E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
 E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=1ms
 
-check-usb-scanner output:
-hecking device 0x05d8/0x4001 [] []
+&lt;device descriptor of 0x05d8/0x4001 at 001:003&gt;
+bLength               18
+bDescriptorType       1
+bcdUSB                1.00
+bDeviceClass          0
+bDeviceSubClass       0
+bDeviceProtocol       0
+bMaxPacketSize0       64
+idVendor              0x05D8
+idProduct             0x4001
+bcdDevice             1.00
+iManufacturer         0 ()
+iProduct              0 ()
+iSerialNumber         0 ()
+bNumConfigurations    1
+ &lt;configuration 0&gt;
+ bLength              9
+ bDescriptorType      2
+ wTotalLength         39
+ bNumInterfaces       1
+ bConfigurationValue  1
+ iConfiguration       0 ()
+ bmAttributes         64 (Self-powered)
+ MaxPower             500 mA
+  &lt;interface 0&gt;
+   &lt;altsetting 0&gt;
+   bLength            9
+   bDescriptorType    4
+   bInterfaceNumber   0
+   bAlternateSetting  0
+   bNumEndpoints      3
+   bInterfaceClass    0
+   bInterfaceSubClass 0
+   bInterfaceProtocol 0
+   iInterface         0 ()
+    &lt;endpoint 0&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x01 (out 0x01)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    64
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 1&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x82 (in 0x02)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    64
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 2&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x83 (in 0x03)
+    bmAttributes      3 (interrupt)
+    wMaxPacketSize    1
+    bInterval         1 ms
+    bRefresh          0
+    bSynchAddress     0
+
+&lt;trying to find out which USB chip is used&gt;
     checking for GT-6801 ...
     this is not a GT-6801 (bDeviceClass = 0)
     checking for GT-6816 ...
     this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
     checking for MA-1017 ...
-    this is not a MA-1017 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x40, bInterval = 0x0)
+    this is not a MA-1017 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacke
+tSize = 0x40, bInterval = 0x0)
     checking for MA-1015 ...
     this is not a MA-1015 (bDeviceClass = 0)
     checking for MA-1509 ...
     this is not a MA-1509 (bDeviceClass = 0)
     checking for LM983[1,2,3] ...
     this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
-  UNKNOWN chipset type
+    checking for GL646 ...
+    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
+    checking for GL646_HP ...
+    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
+    checking for GL660+GL646 ...
+    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
+    checking for GL841 ...
+    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
+    checking for ICM532B ...
+  check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 0)
+&lt;Couldn't determine the type of the USB chip&gt;
+
+found USB scanner (vendor=0x05d8, product=0x4001) at libusb:001:003
     </pre>
     
     <h1>Want to add or correct information?</h1>