Updated with info for S400 with USB product id 0x300b

unsupported/microtek-scanmaker-s400.html

@@ -27,18 +27,24 @@
     </p>
     <h2>Product ID</h2>
     <p>
-      0x201c
+      0x201c / 0x300b
     </p>
     <h2>Chipset</h2>
     <p>
+      ScanMaker S400 with USB product id 0x300b:<br>
+      SQ113-A3, (2nd line: 0428-1505), (3rd line: D189Q-010) or NYnix 438U.<br>
+      The board as 2 main chips, I am not sure wich one is the chipset.
+      The larger one as bus connector on the 4 sides shows SQ113-A3
+      the smaller of the 2 as bus connector on 2 sides only as the marking NYnyx 438U (2nd line: HY57V161610ET-7).
     </p>
     <h2>Comments</h2>
     <p>
-      This scanner is recogonized by Windows XP as a Microtek 4800. It uses the
+      This scanner (with USB product id 0x201c) is recogonized by Windows XP as a Microtek 4800. It uses the
       Microtek Scanwizard V5.95 under Win XP.
     </p>
     <h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
     <pre>
+0x05da/0x201c:
 T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
 D:  Ver= 2.00 Cls=ff(vend.) Sub=03 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=05da ProdID=201c Rev= 0.00
@@ -46,6 +52,18 @@ C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
 I:  If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
 E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
 E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
+
+0x05da/0x300b:
+T:  Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
+D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
+P:  Vendor=05da ProdID=300b Rev= 1.00
+S:  Manufacturer=Prolific Technology Inc.
+S:  Product=USB Scanner
+C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
+I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
+E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us
     </pre>
 
     <h1>Want to add or correct information?</h1>