Added HP ScanJet 4670.

unsupported/hp-scanjet-4600.html

@@ -15,7 +15,8 @@
     <h1>Scanners not supported by SANE</h1>
     <h2>Manufacturer and model</h2>
     <p>
-      Hewlett-Packard Scanjet 4600
+      Hewlett-Packard Scanjet 4600<br>
+      Hewlett-Packard Scanjet 4670<br>
     </p>
     <h2>Bus type</h2>
     <p>
@@ -34,9 +35,13 @@
     </p>
     <h2>Comments</h2>
     <p>
+      About the 4670: "The scanner works on Mac OS X (10.3) with HP's supplied
+      software, and so does Adobe Photoshop Elements (with a HP supplied
+      plug-in), but Apple's "Image Capture" does not see it."
     </p>
     <h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v</h2>
     <pre>
+4600:
 T:  Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
 D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=03f0 ProdID=3005 Rev= 1.00
@@ -48,6 +53,95 @@ I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=83(I) Atr=03(Int.) MxPS=   1 Ivl=500us
+
+4670:
+&lt;device descriptor of 0x03f0/0x3005 at 002:002-03f0-3005-00-00 (Hewlett-Packard.         hp scanjet                )&gt;
+bLength               18
+bDescriptorType       1
+bcdUSB                2.00
+bDeviceClass          0
+bDeviceSubClass       0
+bDeviceProtocol       0
+bMaxPacketSize0       64
+idVendor              0x03F0
+idProduct             0x3005
+bcdDevice             1.00
+iManufacturer         1 (Hewlett-Packard.        )
+iProduct              2 (hp scanjet                )
+iSerialNumber         3 (CN3BXB168694)
+bNumConfigurations    1
+ &lt;configuration 0&gt;
+ bLength              9
+ bDescriptorType      2
+ wTotalLength         39
+ bNumInterfaces       1
+ bConfigurationValue  1
+ iConfiguration       0 ()
+ bmAttributes         192 (Self-powered)
+ MaxPower             100 mA
+  &lt;interface 0&gt;
+   &lt;altsetting 0&gt;
+   bLength            9
+   bDescriptorType    4
+   bInterfaceNumber   0
+   bAlternateSetting  0
+   bNumEndpoints      3
+   bInterfaceClass    255
+   bInterfaceSubClass 255
+   bInterfaceProtocol 255
+   iInterface         0 ()
+    &lt;endpoint 0&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x01 (out 0x01)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    64
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 1&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x82 (in 0x02)
+    bmAttributes      2 (bulk)
+    wMaxPacketSize    64
+    bInterval         0 ms
+    bRefresh          0
+    bSynchAddress     0
+    &lt;endpoint 2&gt;
+    bLength           7
+    bDescriptorType   5
+    bEndpointAddress  0x83 (in 0x03)
+    bmAttributes      3 (interrupt)
+    wMaxPacketSize    1
+    bInterval         3 ms
+    bRefresh          0
+    bSynchAddress     0
+
+&lt;trying to find out which USB chip is used&gt;
+    checking for GT-6801 ...
+    this is not a GT-6801 (bDeviceClass = 0)
+    checking for GT-6816 ...
+    this is not a GT-6816 (bcdUSB = 0x200)
+    checking for MA-1017 ...
+    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for MA-1015 ...
+    this is not a MA-1015 (bDeviceClass = 0)
+    checking for MA-1509 ...
+    this is not a MA-1509 (bDeviceClass = 0)
+    checking for LM983[1,2,3] ...
+    this is not a LM983x (bcdUSB = 0x200)
+    checking for GL646 ...
+    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for GL660+GL646 ...
+    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for GL841 ...
+    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
+    checking for ICM532B ...
+  check 1, this is not a ICM532B (bDeviceClass = 0, bInterfaceClass = 255)
+&lt;Couldn't determine the type of the USB chip&gt;
+
+found USB scanner (vendor=0x03f0 [Hewlett-Packard.        ], product=0x3005 [hp scanjet                ]) at libusb:002:002-03f0-3005-00-00
     </pre>
     
     <h1>Want to add or correct information?</h1>