sane-project-website/man/sane-ibm.5.html

106 wiersze
4.2 KiB
HTML
Czysty Zwykły widok Historia

<HTML>
<HEAD>
<TITLE>sane-ibm.5</TITLE>
</HEAD>
2003-09-24 17:24:12 +00:00
<BODY BGCOLOR=#FFFFFF TEXT=#000000><H1 ALIGN=CENTER><IMG SRC="/images/sane.png" HEIGHT=117 WIDTH=346></H1>
<H1>sane-ibm.5</H1>
<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
<B><A HREF="sane-ibm.5.html">sane-ibm(5)</A></B> SANE Scanner Access Now Easy <B><A HREF="sane-ibm.5.html">sane-ibm(5)</A></B>
</PRE>
<H2>NAME</H2><PRE>
sane-ibm - SANE backend for IBM and Ricoh SCSI flatbed scanners
</PRE>
<H2>DESCRIPTION</H2><PRE>
The <B>sane-ibm</B> library implements a SANE (Scanner Access Now Easy) back-
end that provides access to the IBM 2456 and the Ricoh IS-410, IS-420,
and IS-430 flatbed scanners. Support for the IS-410 and IS-430 is
untested. Please contact the maintainer or the sane-devel mailing list
if you own such a scanner.
This backend is alpha-quality. It may have bugs and some scanners
haven't been tested at all. Be careful and pull the plug if the scanner
causes unusual noise.
</PRE>
<H2>DEVICE NAMES</H2><PRE>
This backend expects device names of the form:
<I>special</I>
Where <I>special</I> is either the path-name for the special device that cor-
responds to a SCSI scanner. The program <I>sane-find-scanner</I> helps to find
out the correct device. Under Linux, such a device name could be
<I>/dev/sg0</I> or <I>/dev/sga</I>, for example. See <B><A HREF="sane-scsi.5.html">sane-scsi(5)</A></B> for details.
</PRE>
<H2>CONFIGURATION</H2><PRE>
The contents of the <I>ibm.conf</I> file is a list of device names that corre-
spond to SCSI scanners. Empty lines and lines starting with a hash
mark (#) are ignored. See <B><A HREF="sane-scsi.5.html">sane-scsi(5)</A></B> on details of what constitutes
a valid device name.
</PRE>
<H2>FILES</H2><PRE>
<I>/usr/local/etc/sane.d/ibm.conf</I>
The backend configuration file (see also description of
<B>SANE_CONFIG_DIR</B> below).
<I>/usr/local/lib/sane/libsane-ibm.a</I>
The static library implementing this backend.
<I>/usr/local/lib/sane/libsane-ibm.so</I>
The shared library implementing this backend (present on systems
that support dynamic loading).
</PRE>
<H2>ENVIRONMENT</H2><PRE>
<B>SANE_CONFIG_DIR</B>
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the config-
uration file is searched in two default directories: first, the
current working directory (".") and then in
/usr/local/etc/sane.d. If the value of the environment variable
ends with the directory separator character, then the default
directories are searched after the explicitly specified directo-
ries. For example, setting <B>SANE_CONFIG_DIR</B> to "/tmp/config:"
would result in directories "tmp/config", ".", and
"/usr/local/etc/sane.d" being searched (in this order).
<B>SANE_DEBUG_IBM</B>
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
</PRE>
<H2>SEE ALSO</H2><PRE>
<B><A HREF="sane.7.html">sane(7)</A></B>, <B><A HREF="sane-find-scanner.1.html">sane-find-scanner(1)</A></B>, <B><A HREF="sane-scsi.5.html">sane-scsi(5)</A></B>,
</PRE>
<H2>AUTHOR</H2><PRE>
mf &lt;massifr@tiscalinet.it&gt;
Maintained by Henning Meier-Geinitz &lt;henning@meier-geinitz.de&gt;
sane-backends 1.0.12-cvs 15 Apr 2003 <B><A HREF="sane-ibm.5.html">sane-ibm(5)</A></B>
</PRE>
<HR>
<ADDRESS>
Man(1) output converted with
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
</ADDRESS>
</BODY>
</HTML>