kopia lustrzana https://gitlab.com/sane-project/backends
108 wiersze
3.4 KiB
Groff
108 wiersze
3.4 KiB
Groff
.TH sane\-dc210 5 "11 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
|
|
.IX sane\-dc210
|
|
.SH NAME
|
|
sane\-dc210 \- SANE backend for Kodak DC210 Digital Camera
|
|
.SH DESCRIPTION
|
|
The
|
|
.B sane\-dc210
|
|
library implements a SANE (Scanner Access Now Easy) backend that
|
|
provides access to the Kodak DC210 camera. THIS IS EXTREMELY ALPHA
|
|
CODE! USE AT YOUR OWN RISK!!
|
|
.SH "DEVICE NAMES"
|
|
The current version of the backend only allows one camera to be
|
|
connected. The device name is always "0".
|
|
.SH CONFIGURATION
|
|
The contents of the
|
|
.I dc210.conf
|
|
specify the serial port and baud rate to use. The baud rate
|
|
specifies the maximum rate to use while downloading pictures. (The
|
|
camera is always initialized using 9600 baud, then switches to the
|
|
higher rate). On my 90MHz Pentium, I usually have no problems downloading
|
|
at 115200 baud as long as the system is not excessively busy and
|
|
the "interrupt-unmask flag" is set in the IDE driver (hdparm \-u1).
|
|
Supported baud rates are: 9600, 19200, 38400, 57600, and 115200.
|
|
.PP
|
|
The dumpinquiry line causes some information about the camera to
|
|
be printed.
|
|
.PP
|
|
cmdrespause specifies how many usec (1,000,000ths of a) between
|
|
writing the command and reading the result should be used. 125000
|
|
seems to be the lowest I could go reliably.
|
|
.PP
|
|
breakpause is the time in 1,000,000ths of a usec between sending the
|
|
"back to default" break sending commands.
|
|
.PP
|
|
Empty lines and lines starting with a hash mark (#) are
|
|
ignored. A sample configuration file is shown below:
|
|
.PP
|
|
.RS
|
|
port=/dev/ttyS0
|
|
.br
|
|
# this is a comment
|
|
.br
|
|
baud=115200
|
|
.br
|
|
dumpinquiry
|
|
.br
|
|
cmdrespause=125000
|
|
.br
|
|
breakpause=1000000
|
|
.RE
|
|
.PP
|
|
.SH FILES
|
|
.TP
|
|
.I @CONFIGDIR@/dc210.conf
|
|
The backend configuration file (see also description of
|
|
.B SANE_CONFIG_DIR
|
|
below).
|
|
.TP
|
|
.I @LIBDIR@/libsane\-dc210.a
|
|
The static library implementing this backend.
|
|
.TP
|
|
.I @LIBDIR@/libsane\-dc210.so
|
|
The shared library implementing this backend (present on systems that
|
|
support dynamic loading).
|
|
|
|
.SH ENVIRONMENT
|
|
.TP
|
|
.B SANE_CONFIG_DIR
|
|
This environment variable specifies the list of directories that may
|
|
contain the configuration file. Under UNIX, the directories are
|
|
separated by a colon (`:'), under OS/2, they are separated by a
|
|
semi-colon (`;'). If this variable is not set, the configuration file
|
|
is searched in two default directories: first, the current working
|
|
directory (".") and then in @CONFIGDIR@. If the value of the
|
|
environment variable ends with the directory separator character, then
|
|
the default directories are searched after the explicitly specified
|
|
directories. For example, setting
|
|
.B SANE_CONFIG_DIR
|
|
to "/tmp/config:" would result in directories "tmp/config", ".", and
|
|
"@CONFIGDIR@" being searched (in this order).
|
|
.TP
|
|
.B SANE_DEBUG_DC210
|
|
If the library was compiled with debugging support enabled, this
|
|
environment variable controls the debug level for this backend.
|
|
A value of 128 requests maximally copious debug output; smaller
|
|
levels reduce verbosity.
|
|
|
|
.SH "SEE ALSO"
|
|
sane(7)
|
|
|
|
.SH AUTHOR
|
|
Brian J. Murrell
|
|
.PP
|
|
This backend is based somewhat on the dc25 backend included in this
|
|
package by Peter Fales.
|
|
.PP
|
|
The manpage was copied from the dc25 backend and somewhat edited by
|
|
Henning Meier-Geinitz.
|
|
|
|
.SH BUGS
|
|
Known bugs/limitations are: ?
|
|
.PP
|
|
More general comments, suggestions, and inquiries about frontends
|
|
or SANE should go to the SANE Developers mailing list
|
|
(see http://www.sane\-project.org/mailing\-lists.html for details).
|
|
You must be subscribed to the list, otherwise your mail won't be
|
|
sent to the subscribers.
|