mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/backend/plustek-usbcal.c

1389 wiersze
42 KiB
C
Czysty Wina Historia

/*.............................................................................
* Project : SANE library for Plustek flatbed scanners; canoscan calibration
*.............................................................................
*/
/** @file plustek-usbcal.c
* @brief Calibration routines for CanoScan CIS devices.
*
* Based on sources acquired from Plustek Inc.<br>
* Copyright (C) 2001-2007 Gerhard Jaeger <gerhard@gjaeger.de><br>
* Large parts Copyright (C) 2003 Christopher Montgomery <monty@xiph.org>
*
* Montys' comment:
* The basic premise: The stock Plustek-usbshading.c in the plustek
* driver is effectively nonfunctional for Canon CanoScan scanners.
* These scanners rely heavily on all calibration steps, especially
* fine white, to produce acceptible scan results. However, to make
* autocalibration work and make it work well involves some
* substantial mucking aobut in code that supports thirty other
* scanners with widely varying characteristics... none of which I own
* or can test.
*
* Therefore, I'm splitting out a few calibration functions I need
* to modify for the CanoScan which allows me to simplify things
* greatly for the CanoScan without worrying about breaking other
* scanners, as well as reuse the vast majority of the Plustek
* driver infrastructure without forking.
*
* History:
* - 0.45m - birth of the file; tested extensively with the LiDE 20
* - 0.46 - renamed to plustek-usbcal.c
* - fixed problems with LiDE30, works now with 650, 1220, 670, 1240
* - cleanup
* - added CCD calibration capability
* - added the usage of the swGain and swOffset values, to allow
* tweaking the calibration results on a sensor base
* - 0.47 - moved usb_HostSwap() to plustek_usbhw.c
* - fixed problem in cano_AdjustLightsource(), so that it won't
* stop too early.
* - 0.48 - cleanup
* - 0.49 - a_bRegs is now part of the device structure
* - fixed lampsetting in cano_AdjustLightsource()
* - 0.50 - tried to use the settings from SANE-1.0.13
* - added _TWEAK_GAIN to allow increasing GAIN during
* lamp coarse calibration
* - added also speedtest
* - fixed segfault in fine calibration
* - 0.51 - added fine calibration cache
* - usb_SwitchLamp() now really switches off the sensor
* - 0.52 - fixed setting for frontend values (gain/offset)
* - added 0 pixel detection for offset calculation
*
* This file is part of the SANE package.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston,
* MA 02111-1307, USA.
*
* As a special exception, the authors of SANE give permission for
* additional uses of the libraries contained in this release of SANE.
*
* The exception is that, if you link a SANE library with other files
* to produce an executable, this does not by itself cause the
* resulting executable to be covered by the GNU General Public
* License. Your use of that executable is in no way restricted on
* account of linking the SANE library code into it.
*
* This exception does not, however, invalidate any other reasons why
* the executable file might be covered by the GNU General Public
* License.
*
* If you submit changes to SANE to the maintainers to be included in
* a subsequent release, you agree by submitting the changes that
* those changes may be distributed with this exception intact.
*
* If you write modifications of your own for SANE, it is your choice
* whether to permit this exception to apply to your modifications.
* If you do not wish that, delete this exception notice.
* <hr>
*/
/* un-/comment the following to en-/disable lamp coarse calibration to tweak
* the initial AFE gain settings
*/
#define _TWEAK_GAIN 1
/* set the threshold for 0 pixels (in percent if pixels per line) */
#define _DARK_TGT_THRESH 1
/** 0 for not ready, 1 pos white lamp on, 2 lamp off */
static int strip_state = 0;
/** depending on the strip state, the sensor is moved to the shading position
* and the lamp ist switched on
*/
static int
cano_PrepareToReadWhiteCal( Plustek_Device *dev, SANE_Bool mv2shading_pos )
{
SANE_Bool goto_shading_pos = SANE_TRUE;
HWDef *hw = &dev->usbDev.HwSetting;
switch (strip_state) {
case 0:
if( !usb_IsSheetFedDevice(dev)) {
if(!usb_ModuleToHome( dev, SANE_TRUE )) {
DBG( _DBG_ERROR, "cano_PrepareToReadWhiteCal() failed\n" );
return _E_LAMP_NOT_IN_POS;
}
} else {
goto_shading_pos = mv2shading_pos;
}
if( goto_shading_pos ) {
if( !usb_ModuleMove(dev, MOVE_Forward,
(u_long)dev->usbDev.pSource->ShadingOriginY)) {
DBG( _DBG_ERROR, "cano_PrepareToReadWhiteCal() failed\n" );
return _E_LAMP_NOT_IN_POS;
}
}
break;
case 2:
dev->usbDev.a_bRegs[0x29] = hw->bReg_0x29;
usb_switchLamp( dev, SANE_TRUE );
if( !usbio_WriteReg( dev->fd, 0x29, dev->usbDev.a_bRegs[0x29])) {
DBG( _DBG_ERROR, "cano_PrepareToReadWhiteCal() failed\n" );
return _E_LAMP_NOT_IN_POS;
}
break;
}
strip_state = 1;
return 0;
}
/** also here, depending on the strip state, the sensor will be moved to
* the shading position and the lamp will be switched off
*/
static int
cano_PrepareToReadBlackCal( Plustek_Device *dev )
{
if( strip_state == 0 )
if(cano_PrepareToReadWhiteCal(dev, SANE_FALSE))
return SANE_FALSE;
if( strip_state != 2 ) {
/*
* if we have a dark shading strip, there's no need to switch
* the lamp off, leave in on a go to that strip
*/
if( dev->usbDev.pSource->DarkShadOrgY >= 0 ) {
if( !usb_IsSheetFedDevice(dev))
usb_ModuleToHome( dev, SANE_TRUE );
usb_ModuleMove ( dev, MOVE_Forward,
(u_long)dev->usbDev.pSource->DarkShadOrgY );
dev->usbDev.a_bRegs[0x45] &= ~0x10;
strip_state = 0;
} else {
/* switch lamp off to read dark data... */
dev->usbDev.a_bRegs[0x29] = 0;
usb_switchLamp( dev, SANE_FALSE );
strip_state = 2;
}
}
return 0;
}
/** according to the strip-state we switch the lamp on
*/
static int
cano_LampOnAfterCalibration( Plustek_Device *dev )
{
HWDef *hw = &dev->usbDev.HwSetting;
switch (strip_state) {
case 2:
dev->usbDev.a_bRegs[0x29] = hw->bReg_0x29;
usb_switchLamp( dev, SANE_TRUE );
if( !usbio_WriteReg( dev->fd, 0x29, dev->usbDev.a_bRegs[0x29])) {
DBG( _DBG_ERROR, "cano_LampOnAfterCalibration() failed\n" );
return _E_LAMP_NOT_IN_POS;
}
strip_state = 1;
break;
}
return 0;
}
/** function to adjust the CIS lamp-off setting for a given channel.
* @param min - pointer to the min OFF point for the CIS-channel
* @param max - pointer to the max OFF point for the CIS-channel
* @param off - pointer to the current OFF point of the CIS-channel
* @param val - current value to check
* @return returns 0 if the value is fine, 1, if we need to adjust
*/
static int
cano_adjLampSetting( u_short *min, u_short *max, u_short *off, u_short val )
{
u_long newoff = *off;
/* perfect value, no need to adjust
* val [53440..61440] is perfect
*/
if((val < (IDEAL_GainNormal)) && (val > (IDEAL_GainNormal-8000)))
return 0;
if(val >= (IDEAL_GainNormal-4000)) {
DBG(_DBG_INFO2, "* TOO BRIGHT --> reduce\n" );
*max = newoff;
*off = ((newoff + *min)>>1);
} else {
u_short bisect = (newoff + *max)>>1;
u_short twice = newoff*2;
DBG(_DBG_INFO2, "* TOO DARK --> up\n" );
*min = newoff;
*off = twice<bisect?twice:bisect;
/* as we have already set the maximum value, there's no need
* for this channel to recalibrate.
*/
if( *off > 0x3FFF ) {
DBG( _DBG_INFO, "* lamp off limited (0x%04x --> 0x3FFF)\n", *off);
*off = 0x3FFF;
return 10;
}
}
if((*min+1) >= *max )
return 0;
return 1;
}
/** cano_AdjustLightsource
* coarse calibration step 0
* [Monty changes]: On the CanoScan at least, the default lamp
* settings are several *hundred* percent too high and vary from
* scanner-to-scanner by 20-50%. This is only for CIS devices
* where the lamp_off parameter is adjustable; I'd make it more general,
* but I only have the CIS hardware to test.
*/
static int
cano_AdjustLightsource( Plustek_Device *dev )
{
char tmp[40];
int i;
int res_r, res_g, res_b;
u_long dw, dwR, dwG, dwB, dwDiv, dwLoop1, dwLoop2;
RGBUShortDef max_rgb, min_rgb, tmp_rgb;
u_long *scanbuf = dev->scanning.pScanBuffer;
DCapsDef *scaps = &dev->usbDev.Caps;
HWDef *hw = &dev->usbDev.HwSetting;
if( usb_IsEscPressed())
return SANE_FALSE;
DBG( _DBG_INFO, "cano_AdjustLightsource()\n" );
if( !usb_IsCISDevice(dev)) {
DBG( _DBG_INFO, "- function skipped, CCD device!\n" );
/* HEINER: we might have to tweak the PWM for the lamps */
return SANE_TRUE;
}
/* define the strip to scan for coarse calibration
* done at optical resolution.
*/
m_ScanParam.Size.dwLines = 1;
m_ScanParam.Size.dwPixels = scaps->Normal.Size.x *
scaps->OpticDpi.x / 300UL;
m_ScanParam.Size.dwBytes = m_ScanParam.Size.dwPixels * 2;
if( m_ScanParam.bDataType == SCANDATATYPE_Color )
m_ScanParam.Size.dwBytes *=3;
m_ScanParam.Origin.x = (u_short)((u_long) hw->wActivePixelsStart *
300UL / scaps->OpticDpi.x);
m_ScanParam.bCalibration = PARAM_Gain;
DBG( _DBG_INFO2, "* Coarse Calibration Strip:\n" );
DBG( _DBG_INFO2, "* Lines = %lu\n", m_ScanParam.Size.dwLines );
DBG( _DBG_INFO2, "* Pixels = %lu\n", m_ScanParam.Size.dwPixels );
DBG( _DBG_INFO2, "* Bytes = %lu\n", m_ScanParam.Size.dwBytes );
DBG( _DBG_INFO2, "* Origin.X = %u\n", m_ScanParam.Origin.x );
/* init... */
max_rgb.Red = max_rgb.Green = max_rgb.Blue = 0x3fff;
min_rgb.Red = hw->red_lamp_on;
min_rgb.Green = hw->green_lamp_on;
min_rgb.Blue = hw->blue_lamp_on;
if((dev->adj.rlampoff != -1) &&
(dev->adj.glampoff != -1) && (dev->adj.rlampoff != -1)) {
DBG( _DBG_INFO, "- function skipped, using frontend values!\n" );
return SANE_TRUE;
}
/* we probably should preset gain to some reasonably good value
* i.e. 0x0a as it's done by Canon within their Windoze driver!
*/
#ifdef _TWEAK_GAIN
for( i=0x3b; i<0x3e; i++ )
dev->usbDev.a_bRegs[i] = 0x0a;
#endif
for( i = 0; ; i++ ) {
m_ScanParam.dMCLK = dMCLK;
if( !usb_SetScanParameters( dev, &m_ScanParam )) {
return SANE_FALSE;
}
if( !usb_ScanBegin( dev, SANE_FALSE) ||
!usb_ScanReadImage( dev, scanbuf, m_ScanParam.Size.dwPhyBytes ) ||
!usb_ScanEnd( dev )) {
DBG( _DBG_ERROR, "* cano_AdjustLightsource() failed\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "* PhyBytes = %lu\n", m_ScanParam.Size.dwPhyBytes );
DBG( _DBG_INFO2, "* PhyPixels = %lu\n", m_ScanParam.Size.dwPhyPixels);
sprintf( tmp, "coarse-lamp-%u.raw", i );
dumpPicInit(&m_ScanParam, tmp);
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwPhyBytes, 0);
if(usb_HostSwap())
usb_Swap((u_short *)scanbuf, m_ScanParam.Size.dwPhyBytes );
sprintf( tmp, "coarse-lamp-swap%u.raw", i );
dumpPicInit(&m_ScanParam, tmp);
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwPhyBytes, 0);
dwDiv = 10;
dwLoop1 = m_ScanParam.Size.dwPhyPixels/dwDiv;
tmp_rgb.Red = tmp_rgb.Green = tmp_rgb.Blue = 0;
/* find out the max pixel value for R, G, B */
for( dw = 0; dwLoop1; dwLoop1-- ) {
/* do some averaging... */
for (dwLoop2 = dwDiv, dwR = dwG = dwB = 0; dwLoop2; dwLoop2--, dw++) {
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
if( usb_IsCISDevice(dev)) {
dwR += ((u_short*)scanbuf)[dw];
dwG += ((u_short*)scanbuf)
[dw+m_ScanParam.Size.dwPhyPixels+1];
dwB += ((u_short*)scanbuf)
[dw+(m_ScanParam.Size.dwPhyPixels+1)*2];
} else {
dwR += ((RGBUShortDef*)scanbuf)[dw].Red;
dwG += ((RGBUShortDef*)scanbuf)[dw].Green;
dwB += ((RGBUShortDef*)scanbuf)[dw].Blue;
}
} else {
dwG += ((u_short*)scanbuf)[dw];
}
}
dwR = dwR / dwDiv;
dwG = dwG / dwDiv;
dwB = dwB / dwDiv;
if( tmp_rgb.Red < dwR )
tmp_rgb.Red = dwR;
if( tmp_rgb.Green < dwG )
tmp_rgb.Green = dwG;
if( tmp_rgb.Blue < dwB )
tmp_rgb.Blue = dwB;
}
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
DBG( _DBG_INFO2, "red_lamp_off = %u/%u/%u\n",
min_rgb.Red ,hw->red_lamp_off, max_rgb.Red );
}
DBG( _DBG_INFO2, "green_lamp_off = %u/%u/%u\n",
min_rgb.Green, hw->green_lamp_off, max_rgb.Green );
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
DBG( _DBG_INFO2, "blue_lamp_off = %u/%u/%u\n",
min_rgb.Blue, hw->blue_lamp_off, max_rgb.Blue );
}
DBG(_DBG_INFO2, "CUR(R,G,B)= 0x%04x(%u), 0x%04x(%u), 0x%04x(%u)\n",
tmp_rgb.Red, tmp_rgb.Red, tmp_rgb.Green,
tmp_rgb.Green, tmp_rgb.Blue, tmp_rgb.Blue );
res_r = 0;
res_g = 0;
res_b = 0;
/* bisect */
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
res_r = cano_adjLampSetting( &min_rgb.Red, &max_rgb.Red,
&hw->red_lamp_off, tmp_rgb.Red );
res_b = cano_adjLampSetting( &min_rgb.Blue, &max_rgb.Blue,
&hw->blue_lamp_off,tmp_rgb.Blue );
}
res_g = cano_adjLampSetting( &min_rgb.Green, &max_rgb.Green,
&hw->green_lamp_off, tmp_rgb.Green );
/* nothing adjusted, so stop here */
if((res_r == 0) && (res_g == 0) && (res_b == 0))
break;
/* no need to adjust more, we have already reached the limit
* without tweaking the gain.
*/
if((res_r == 10) && (res_g == 10) && (res_b == 10))
break;
/* we raise the gain for channels, that have been limited */
#ifdef _TWEAK_GAIN
if( res_r == 10 ) {
if( dev->usbDev.a_bRegs[0x3b] < 0xf)
dev->usbDev.a_bRegs[0x3b]++;
}
if( res_g == 10 ) {
if( dev->usbDev.a_bRegs[0x3c] < 0x0f)
dev->usbDev.a_bRegs[0x3c]++;
}
if( res_b == 10 ) {
if( dev->usbDev.a_bRegs[0x3d] < 0x0f)
dev->usbDev.a_bRegs[0x3d]++;
}
#endif
/* now decide what to do:
* if we were too bright, we have to rerun the loop in any
* case
* if we're too dark, we should rerun it too, but we can
* compensate that using higher gain values later
*/
if( i >= 10 ) {
DBG(_DBG_INFO, "* 10 times limit reached, still too dark!!!\n");
break;
}
usb_AdjustLamps(dev, SANE_TRUE);
}
DBG( _DBG_INFO, "* red_lamp_on = %u\n", hw->red_lamp_on );
DBG( _DBG_INFO, "* red_lamp_off = %u\n", hw->red_lamp_off );
DBG( _DBG_INFO, "* green_lamp_on = %u\n", hw->green_lamp_on );
DBG( _DBG_INFO, "* green_lamp_off = %u\n", hw->green_lamp_off );
DBG( _DBG_INFO, "* blue_lamp_on = %u\n", hw->blue_lamp_on );
DBG( _DBG_INFO, "* blue_lamp_off = %u\n", hw->blue_lamp_off );
DBG( _DBG_INFO, "cano_AdjustLightsource() done.\n" );
return SANE_TRUE;
}
/**
*/
static int
cano_adjGainSetting( u_char *min, u_char *max, u_char *gain,u_long val )
{
u_long newgain = *gain;
if((val < IDEAL_GainNormal) && (val > (IDEAL_GainNormal-8000)))
return 0;
if(val > (IDEAL_GainNormal-4000)) {
*max = newgain;
*gain = (newgain + *min)>>1;
} else {
*min = newgain;
*gain = (newgain + *max)>>1;
}
if((*min+1) >= *max)
return 0;
return 1;
}
/** cano_AdjustGain
* function to perform the "coarse calibration step" part 1.
* We scan reference image pixels to determine the optimum coarse gain settings
* for R, G, B. (Analog gain and offset prior to ADC). These coefficients are
* applied at the line rate during normal scanning.
* The scanned line should contain a white strip with some black at the
* beginning. The function searches for the maximum value which corresponds to
* the maximum white value.
* Affects register 0x3b, 0x3c and 0x3d
*
* adjLightsource, above, steals most of this function's thunder.
*/
static SANE_Bool
cano_AdjustGain( Plustek_Device *dev )
{
char tmp[40];
int i = 0, adj = 1;
u_long dw;
u_long *scanbuf = dev->scanning.pScanBuffer;
DCapsDef *scaps = &dev->usbDev.Caps;
HWDef *hw = &dev->usbDev.HwSetting;
unsigned char max[3], min[3];
if( usb_IsEscPressed())
return SANE_FALSE;
bMaxITA = 0xff;
max[0] = max[1] = max[2] = 0x3f;
min[0] = min[1] = min[2] = 1;
DBG( _DBG_INFO, "cano_AdjustGain()\n" );
if( !usb_InCalibrationMode(dev)) {
if((dev->adj.rgain != -1) &&
(dev->adj.ggain != -1) && (dev->adj.bgain != -1)) {
setAdjGain( dev->adj.rgain, &dev->usbDev.a_bRegs[0x3b] );
setAdjGain( dev->adj.ggain, &dev->usbDev.a_bRegs[0x3c] );
setAdjGain( dev->adj.bgain, &dev->usbDev.a_bRegs[0x3d] );
DBG( _DBG_INFO, "- function skipped, using frontend values!\n" );
return SANE_TRUE;
}
}
/* define the strip to scan for coarse calibration
* done at 300dpi
*/
m_ScanParam.Size.dwLines = 1; /* for gain */
m_ScanParam.Size.dwPixels = scaps->Normal.Size.x *
scaps->OpticDpi.x / 300UL;
m_ScanParam.Size.dwBytes = m_ScanParam.Size.dwPixels * 2;
if( usb_IsCISDevice(dev) && m_ScanParam.bDataType == SCANDATATYPE_Color)
m_ScanParam.Size.dwBytes *=3;
m_ScanParam.Origin.x = (u_short)((u_long) hw->wActivePixelsStart *
300UL / scaps->OpticDpi.x);
m_ScanParam.bCalibration = PARAM_Gain;
DBG( _DBG_INFO2, "Coarse Calibration Strip:\n" );
DBG( _DBG_INFO2, "Lines = %lu\n", m_ScanParam.Size.dwLines );
DBG( _DBG_INFO2, "Pixels = %lu\n", m_ScanParam.Size.dwPixels );
DBG( _DBG_INFO2, "Bytes = %lu\n", m_ScanParam.Size.dwBytes );
DBG( _DBG_INFO2, "Origin.X = %u\n", m_ScanParam.Origin.x );
while( adj ) {
m_ScanParam.dMCLK = dMCLK;
if( !usb_SetScanParameters( dev, &m_ScanParam ))
return SANE_FALSE;
if( !usb_ScanBegin( dev, SANE_FALSE) ||
!usb_ScanReadImage(dev,scanbuf,m_ScanParam.Size.dwPhyBytes) ||
!usb_ScanEnd( dev )) {
DBG( _DBG_ERROR, "cano_AdjustGain() failed\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "PhyBytes = %lu\n", m_ScanParam.Size.dwPhyBytes );
DBG( _DBG_INFO2, "PhyPixels = %lu\n", m_ScanParam.Size.dwPhyPixels );
sprintf( tmp, "coarse-gain-%u.raw", i++ );
dumpPicInit(&m_ScanParam, tmp);
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwPhyBytes, 0);
if(usb_HostSwap())
usb_Swap((u_short *)scanbuf, m_ScanParam.Size.dwPhyBytes );
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
RGBUShortDef max_rgb;
u_long dwR, dwG, dwB;
u_long dwDiv = 10;
u_long dwLoop1 = m_ScanParam.Size.dwPhyPixels/dwDiv, dwLoop2;
max_rgb.Red = max_rgb.Green = max_rgb.Blue = 0;
/* find out the max pixel value for R, G, B */
for( dw = 0; dwLoop1; dwLoop1-- ) {
/* do some averaging... */
for (dwLoop2 = dwDiv, dwR=dwG=dwB=0; dwLoop2; dwLoop2--, dw++) {
if( usb_IsCISDevice(dev)) {
dwR += ((u_short*)scanbuf)[dw];
dwG += ((u_short*)scanbuf)
[dw+m_ScanParam.Size.dwPhyPixels+1];
dwB += ((u_short*)scanbuf)
[dw+(m_ScanParam.Size.dwPhyPixels+1)*2];
} else {
dwR += ((RGBUShortDef*)scanbuf)[dw].Red;
dwG += ((RGBUShortDef*)scanbuf)[dw].Green;
dwB += ((RGBUShortDef*)scanbuf)[dw].Blue;
}
}
dwR = dwR / dwDiv;
dwG = dwG / dwDiv;
dwB = dwB / dwDiv;
if(max_rgb.Red < dwR)
max_rgb.Red = dwR;
if(max_rgb.Green < dwG)
max_rgb.Green = dwG;
if(max_rgb.Blue < dwB)
max_rgb.Blue = dwB;
}
DBG(_DBG_INFO2, "MAX(R,G,B)= 0x%04x(%u), 0x%04x(%u), 0x%04x(%u)\n",
max_rgb.Red, max_rgb.Red, max_rgb.Green,
max_rgb.Green, max_rgb.Blue, max_rgb.Blue );
adj = cano_adjGainSetting(min , max ,dev->usbDev.a_bRegs+0x3b,max_rgb.Red );
adj += cano_adjGainSetting(min+1, max+1,dev->usbDev.a_bRegs+0x3c,max_rgb.Green);
adj += cano_adjGainSetting(min+2, max+2,dev->usbDev.a_bRegs+0x3d,max_rgb.Blue );
} else {
u_short w_max = 0;
for( dw = 0; dw < m_ScanParam.Size.dwPhyPixels; dw++ ) {
if( w_max < ((u_short*)scanbuf)[dw])
w_max = ((u_short*)scanbuf)[dw];
}
adj = cano_adjGainSetting(min,max,dev->usbDev.a_bRegs+0x3c,w_max);
dev->usbDev.a_bRegs[0x3b] = (dev->usbDev.a_bRegs[0x3d] = dev->usbDev.a_bRegs[0x3c]);
DBG(_DBG_INFO2, "MAX(G)= 0x%04x(%u)\n", w_max, w_max );
}
DBG( _DBG_INFO2, "REG[0x3b] = %u\n", dev->usbDev.a_bRegs[0x3b] );
DBG( _DBG_INFO2, "REG[0x3c] = %u\n", dev->usbDev.a_bRegs[0x3c] );
DBG( _DBG_INFO2, "REG[0x3d] = %u\n", dev->usbDev.a_bRegs[0x3d] );
}
DBG( _DBG_INFO, "cano_AdjustGain() done.\n" );
return SANE_TRUE;
}
static int tweak_offset[3];
/**
*/
static int
cano_GetNewOffset(Plustek_Device *dev, u_long *val, int channel, signed char *low,
signed char *now, signed char *high, u_long *zc)
{
DCapsDef *scaps = &dev->usbDev.Caps;
if (tweak_offset[channel]) {
/* if we're too black, we're likely off the low end */
if( val[channel] <= 16 ) {
low[channel] = now[channel];
now[channel] = (now[channel]+high[channel])/2;
dev->usbDev.a_bRegs[0x38+channel]= (now[channel]&0x3f);
if( low[channel]+1 >= high[channel] )
return 0;
return 1;
} else if ( val[channel]>=2048 ) {
high[channel]=now[channel];
now[channel]=(now[channel]+low[channel])/2;
dev->usbDev.a_bRegs[0x38+channel]= (now[channel]&0x3f);
if(low[channel]+1>=high[channel])
return 0;
return 1;
}
}
if (!(scaps->workaroundFlag & _WAF_INC_DARKTGT)) {
DBG( _DBG_INFO, "0 Pixel adjustment not active!\n");
return 0;
}
/* reaching this point, our black level should be okay, but
* we also should check the percentage of 0 level pixels.
* It turned out, that when having a lot of 0 level pixels,
* the calibration will be bad and the resulting scans show up
* stripes...
*/
if (zc[channel] > _DARK_TGT_THRESH) {
DBG( _DBG_INFO2, "More than %u%% 0 pixels detected, raise offset!\n",
_DARK_TGT_THRESH);
high[channel]=now[channel];
now[channel]=(now[channel]+low[channel])/2;
/* no more value checks, the goal to set the black level < 2048
* will cause stripes...
*/
tweak_offset[channel] = 0;
dev->usbDev.a_bRegs[0x38+channel]= (now[channel]&0x3f);
if( low[channel]+1 >= high[channel] )
return 0;
return 1;
}
#if 0
else if ( val[channel]>=4096 ) {
low[channel] = now[channel];
now[channel] = (now[channel]+high[channel])/2;
dev->usbDev.a_bRegs[0x38+channel]= (now[channel]&0x3f);
if( low[channel]+1 >= high[channel] )
return 0;
return 1;
}
#endif
return 0;
}
/** cano_AdjustOffset
* function to perform the "coarse calibration step" part 2.
* We scan reference image pixels to determine the optimum coarse offset settings
* for R, G, B. (Analog gain and offset prior to ADC). These coefficients are
* applied at the line rate during normal scanning.
* On CIS based devices, we switch the light off, on CCD devices, we use the optical
* black pixels.
* Affects register 0x38, 0x39 and 0x3a
*/
/* Move this to a bisection-based algo and correct some fenceposts;
Plustek's example code disagrees with NatSemi's docs; going by the
docs works better, I will assume the docs are correct. --Monty */
static int
cano_AdjustOffset( Plustek_Device *dev )
{
char tmp[40];
int i, adj;
u_short r, g, b;
u_long dw, dwPixels;
u_long dwSum[3], zCount[3];
signed char low[3] = {-32,-32,-32 };
signed char now[3] = { 0, 0, 0 };
signed char high[3] = { 31, 31, 31 };
u_long *scanbuf = dev->scanning.pScanBuffer;
HWDef *hw = &dev->usbDev.HwSetting;
DCapsDef *scaps = &dev->usbDev.Caps;
if( usb_IsEscPressed())
return SANE_FALSE;
DBG( _DBG_INFO, "cano_AdjustOffset()\n" );
if( !usb_InCalibrationMode(dev)) {
if((dev->adj.rofs != -1) &&
(dev->adj.gofs != -1) && (dev->adj.bofs != -1)) {
dev->usbDev.a_bRegs[0x38] = (dev->adj.rofs & 0x3f);
dev->usbDev.a_bRegs[0x39] = (dev->adj.gofs & 0x3f);
dev->usbDev.a_bRegs[0x3a] = (dev->adj.bofs & 0x3f);
DBG( _DBG_INFO, "- function skipped, using frontend values!\n" );
return SANE_TRUE;
}
}
m_ScanParam.Size.dwLines = 1;
m_ScanParam.Size.dwPixels = scaps->Normal.Size.x*scaps->OpticDpi.x/300UL;
if( usb_IsCISDevice(dev))
dwPixels = m_ScanParam.Size.dwPixels;
else
dwPixels = (u_long)(hw->bOpticBlackEnd - hw->bOpticBlackStart);
m_ScanParam.Size.dwBytes = m_ScanParam.Size.dwPixels * 2;
if( usb_IsCISDevice(dev) && m_ScanParam.bDataType == SCANDATATYPE_Color)
m_ScanParam.Size.dwBytes *= 3;
m_ScanParam.Origin.x = (u_short)((u_long)hw->bOpticBlackStart * 300UL /
dev->usbDev.Caps.OpticDpi.x);
m_ScanParam.bCalibration = PARAM_Offset;
m_ScanParam.dMCLK = dMCLK;
if( !usb_SetScanParameters( dev, &m_ScanParam )) {
DBG( _DBG_ERROR, "cano_AdjustOffset() failed\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "S.dwPixels = %lu\n", m_ScanParam.Size.dwPixels );
DBG( _DBG_INFO2, "dwPixels = %lu\n", dwPixels );
DBG( _DBG_INFO2, "dwPhyBytes = %lu\n", m_ScanParam.Size.dwPhyBytes );
DBG( _DBG_INFO2, "dwPhyPixels = %lu\n", m_ScanParam.Size.dwPhyPixels );
tweak_offset[0] =
tweak_offset[1] =
tweak_offset[2] = 1;
for( i = 0, adj = 1; adj != 0; i++ ) {
if((!usb_ScanBegin(dev, SANE_FALSE)) ||
(!usb_ScanReadImage(dev,scanbuf,m_ScanParam.Size.dwPhyBytes)) ||
!usb_ScanEnd( dev )) {
DBG( _DBG_ERROR, "cano_AdjustOffset() failed\n" );
return SANE_FALSE;
}
sprintf( tmp, "coarse-off-%u.raw", i );
dumpPicInit(&m_ScanParam, tmp);
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwPhyBytes, 0);
if(usb_HostSwap())
usb_Swap((u_short *)scanbuf, m_ScanParam.Size.dwPhyBytes );
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
dwSum[0] = dwSum[1] = dwSum[2] = 0;
zCount[0] = zCount[1] = zCount[2] = 0;
for (dw = 0; dw < dwPixels; dw++) {
if( usb_IsCISDevice(dev)) {
r = ((u_short*)scanbuf)[dw];
g = ((u_short*)scanbuf)[dw+m_ScanParam.Size.dwPhyPixels+1];
b = ((u_short*)scanbuf)[dw+(m_ScanParam.Size.dwPhyPixels+1)*2];
} else {
r = ((RGBUShortDef*)scanbuf)[dw].Red;
g = ((RGBUShortDef*)scanbuf)[dw].Green;
b = ((RGBUShortDef*)scanbuf)[dw].Blue;
}
dwSum[0] += r;
dwSum[1] += g;
dwSum[2] += b;
if (r==0) zCount[0]++;
if (g==0) zCount[1]++;
if (b==0) zCount[2]++;
}
DBG( _DBG_INFO2, "RedSum = %lu, ave = %lu, ZC=%lu, %lu%%\n",
dwSum[0], dwSum[0]/dwPixels,
zCount[0], (zCount[0]*100)/dwPixels);
DBG( _DBG_INFO2, "GreenSum = %lu, ave = %lu, ZC=%lu, %lu%%\n",
dwSum[1], dwSum[1]/dwPixels,
zCount[1], (zCount[1]*100)/dwPixels);
DBG( _DBG_INFO2, "BlueSum = %lu, ave = %lu, ZC=%lu, %lu%%\n",
dwSum[2], dwSum[2]/dwPixels,
zCount[2], (zCount[2]*100)/dwPixels);
/* do averaging for each channel */
dwSum[0] /= dwPixels;
dwSum[1] /= dwPixels;
dwSum[2] /= dwPixels;
zCount[0] = (zCount[0] * 100)/ dwPixels;
zCount[1] = (zCount[1] * 100)/ dwPixels;
zCount[2] = (zCount[2] * 100)/ dwPixels;
adj = cano_GetNewOffset(dev, dwSum, 0, low, now, high, zCount);
adj |= cano_GetNewOffset(dev, dwSum, 1, low, now, high, zCount);
adj |= cano_GetNewOffset(dev, dwSum, 2, low, now, high, zCount);
DBG( _DBG_INFO2, "RedOff = %d/%d/%d\n",
(int)low[0],(int)now[0],(int)high[0]);
DBG( _DBG_INFO2, "GreenOff = %d/%d/%d\n",
(int)low[1],(int)now[1],(int)high[1]);
DBG( _DBG_INFO2, "BlueOff = %d/%d/%d\n",
(int)low[2],(int)now[2],(int)high[2]);
} else {
dwSum[0] = 0;
zCount[0] = 0;
for( dw = 0; dw < dwPixels; dw++ ) {
dwSum[0] += ((u_short*)scanbuf)[dw];
if (((u_short*)scanbuf)[dw] == 0)
zCount[0]++;
}
DBG( _DBG_INFO2, "Sum=%lu, ave=%lu, ZC=%lu, %lu%%\n",
dwSum[0],dwSum[0]/dwPixels,
zCount[0], (zCount[0]*100)/dwPixels);
dwSum[0] /= dwPixels;
zCount[0] = (zCount[0] * 100)/ dwPixels;
adj = cano_GetNewOffset(dev, dwSum, 0, low, now, high, zCount);
dev->usbDev.a_bRegs[0x3a] =
dev->usbDev.a_bRegs[0x39] = dev->usbDev.a_bRegs[0x38];
DBG( _DBG_INFO2, "GrayOff = %d/%d/%d\n",
(int)low[0],(int)now[0],(int)high[0]);
}
DBG( _DBG_INFO2, "REG[0x38] = %u\n", dev->usbDev.a_bRegs[0x38] );
DBG( _DBG_INFO2, "REG[0x39] = %u\n", dev->usbDev.a_bRegs[0x39] );
DBG( _DBG_INFO2, "REG[0x3a] = %u\n", dev->usbDev.a_bRegs[0x3a] );
_UIO(sanei_lm983x_write(dev->fd, 0x38, &dev->usbDev.a_bRegs[0x38], 3, SANE_TRUE));
}
/* is that really needed?! */
if( m_ScanParam.bDataType == SCANDATATYPE_Color ) {
dev->usbDev.a_bRegs[0x38] = now[0] & 0x3f;
dev->usbDev.a_bRegs[0x39] = now[1] & 0x3f;
dev->usbDev.a_bRegs[0x3a] = now[2] & 0x3f;
} else {
dev->usbDev.a_bRegs[0x38] =
dev->usbDev.a_bRegs[0x39] =
dev->usbDev.a_bRegs[0x3a] = now[0] & 0x3f;
}
DBG( _DBG_INFO, "cano_AdjustOffset() done.\n" );
return SANE_TRUE;
}
/** usb_AdjustDarkShading
* fine calibration part 1
*/
static SANE_Bool
cano_AdjustDarkShading( Plustek_Device *dev, u_short cal_dpi )
{
char tmp[40];
ScanParam *param = &dev->scanning.sParam;
ScanDef *scan = &dev->scanning;
u_long *scanbuf = scan->pScanBuffer;
u_short *bufp;
unsigned int i, j;
int step, stepW, val;
u_long red, green, blue, gray;
DBG( _DBG_INFO, "cano_AdjustDarkShading()\n" );
if( usb_IsEscPressed())
return SANE_FALSE;
usb_PrepareFineCal( dev, &m_ScanParam, cal_dpi );
m_ScanParam.bCalibration = PARAM_DarkShading;
sprintf( tmp, "fine-dark.raw" );
dumpPicInit(&m_ScanParam, tmp);
usb_SetScanParameters( dev, &m_ScanParam );
if( usb_ScanBegin( dev, SANE_FALSE ) &&
usb_ScanReadImage( dev, scanbuf, m_ScanParam.Size.dwTotalBytes)) {
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwTotalBytes, 0);
if(usb_HostSwap())
usb_Swap((u_short *)scanbuf, m_ScanParam.Size.dwTotalBytes);
}
if (!usb_ScanEnd( dev )){
DBG( _DBG_ERROR, "cano_AdjustDarkShading() failed\n" );
return SANE_FALSE;
}
/* average the n lines, compute reg values */
if( scan->sParam.bDataType == SCANDATATYPE_Color ) {
stepW = m_ScanParam.Size.dwPhyPixels;
if( usb_IsCISDevice(dev))
step = m_ScanParam.Size.dwPhyPixels + 1;
else
step = (m_ScanParam.Size.dwPhyPixels*3) + 1;
for( i=0; i<m_ScanParam.Size.dwPhyPixels; i++ ) {
red = 0;
green = 0;
blue = 0;
if( usb_IsCISDevice(dev))
bufp = ((u_short *)scanbuf)+i;
else
bufp = ((u_short *)scanbuf)+(i*3);
for( j=0; j<m_ScanParam.Size.dwPhyLines; j++ ) {
if( usb_IsCISDevice(dev)) {
red += *bufp; bufp+=step;
green += *bufp; bufp+=step;
blue += *bufp; bufp+=step;
} else {
red += bufp[0];
green += bufp[1];
blue += bufp[2];
bufp += step;
}
}
val = ((int)(red/m_ScanParam.Size.dwPhyLines) + param->swOffset[0]);
if( val < 0 ) {
DBG( _DBG_INFO, "val < 0!!!!\n" );
val = 0;
}
a_wDarkShading[i] = (u_short)val;
val = ((int)(green/m_ScanParam.Size.dwPhyLines) + param->swOffset[1]);
if( val < 0 ) {
DBG( _DBG_INFO, "val < 0!!!!\n" );
val = 0;
}
a_wDarkShading[i+stepW] = (u_short)val;
val = ((int)(blue/m_ScanParam.Size.dwPhyLines) + param->swOffset[2]);
if( val < 0 ) {
DBG( _DBG_INFO, "val < 0!!!!\n" );
val = 0;
}
a_wDarkShading[i+stepW*2] = (u_short)val;
}
} else {
step = m_ScanParam.Size.dwPhyPixels + 1;
for( i=0; i<m_ScanParam.Size.dwPhyPixels; i++ ) {
gray = 0;
bufp = ((u_short *)scanbuf)+i;
for( j=0; j < m_ScanParam.Size.dwPhyLines; j++ ) {
gray += *bufp;
bufp += step;
}
a_wDarkShading[i]= gray/j + param->swOffset[0];
}
memcpy( a_wDarkShading + m_ScanParam.Size.dwPhyPixels,
a_wDarkShading, m_ScanParam.Size.dwPhyPixels * 2);
memcpy( a_wDarkShading + m_ScanParam.Size.dwPhyPixels * 2,
a_wDarkShading, m_ScanParam.Size.dwPhyPixels * 2);
}
if(usb_HostSwap())
usb_Swap(a_wDarkShading, m_ScanParam.Size.dwPhyPixels * 2 * 3);
usb_line_statistics( "Dark", a_wDarkShading, m_ScanParam.Size.dwPhyPixels,
scan->sParam.bDataType == SCANDATATYPE_Color?1:0);
DBG( _DBG_INFO, "cano_AdjustDarkShading() done\n" );
return SANE_TRUE;
}
/** usb_AdjustWhiteShading
* fine calibration part 2 - read the white calibration area and calculate
* the gain coefficient for each pixel
*/
static SANE_Bool
cano_AdjustWhiteShading( Plustek_Device *dev, u_short cal_dpi )
{
char tmp[40];
ScanParam *param = &dev->scanning.sParam;
ScanDef *scan = &dev->scanning;
u_long *scanbuf = scan->pScanBuffer;
u_short *bufp;
unsigned int i, j;
int step, stepW;
u_long red, green, blue, gray;
DBG( _DBG_INFO, "cano_AdjustWhiteShading()\n" );
if( usb_IsEscPressed())
return SANE_FALSE;
usb_PrepareFineCal( dev, &m_ScanParam, cal_dpi );
m_ScanParam.bCalibration = PARAM_WhiteShading;
sprintf( tmp, "fine-white.raw" );
DBG( _DBG_INFO2, "FINE WHITE Calibration Strip: %s\n", tmp );
DBG( _DBG_INFO2, "Lines = %lu\n", m_ScanParam.Size.dwLines );
DBG( _DBG_INFO2, "Pixels = %lu\n", m_ScanParam.Size.dwPixels );
DBG( _DBG_INFO2, "Bytes = %lu\n", m_ScanParam.Size.dwBytes );
DBG( _DBG_INFO2, "Origin.X = %u\n", m_ScanParam.Origin.x );
dumpPicInit(&m_ScanParam, tmp);
if( usb_SetScanParameters( dev, &m_ScanParam ) &&
usb_ScanBegin( dev, SANE_FALSE ) &&
usb_ScanReadImage( dev, scanbuf, m_ScanParam.Size.dwTotalBytes)) {
dumpPic(tmp, (u_char*)scanbuf, m_ScanParam.Size.dwTotalBytes, 0);
if(usb_HostSwap())
usb_Swap((u_short *)scanbuf, m_ScanParam.Size.dwTotalBytes);
if (!usb_ScanEnd( dev )) {
DBG( _DBG_ERROR, "cano_AdjustWhiteShading() failed\n" );
return SANE_FALSE;
}
} else {
DBG( _DBG_ERROR, "cano_AdjustWhiteShading() failed\n" );
return SANE_FALSE;
}
/* average the n lines, compute reg values */
if( scan->sParam.bDataType == SCANDATATYPE_Color ) {
stepW = m_ScanParam.Size.dwPhyPixels;
if( usb_IsCISDevice(dev))
step = m_ScanParam.Size.dwPhyPixels + 1;
else
step = (m_ScanParam.Size.dwPhyPixels*3) + 1;
for( i=0; i < m_ScanParam.Size.dwPhyPixels; i++ ) {
red = 0;
green = 0;
blue = 0;
if( usb_IsCISDevice(dev))
bufp = ((u_short *)scanbuf)+i;
else
bufp = ((u_short *)scanbuf)+(i*3);
for( j=0; j<m_ScanParam.Size.dwPhyLines; j++ ) {
if( usb_IsCISDevice(dev)) {
red += *bufp; bufp+=step;
green += *bufp; bufp+=step;
blue += *bufp; bufp+=step;
} else {
red += bufp[0];
green += bufp[1];
blue += bufp[2];
bufp += step;
}
}
/* tweaked by the settings in swGain --> 1000/swGain[r,g,b] */
red = (65535.*1000./(double)param->swGain[0]) * 16384.*j/red;
green = (65535.*1000./(double)param->swGain[1]) * 16384.*j/green;
blue = (65535.*1000./(double)param->swGain[2]) * 16384.*j/blue;
a_wWhiteShading[i] = (red > 65535 ? 65535:red );
a_wWhiteShading[i+stepW] = (green > 65535 ? 65535:green);
a_wWhiteShading[i+stepW*2] = (blue > 65535 ? 65535:blue );
}
} else {
step = m_ScanParam.Size.dwPhyPixels + 1;
for( i=0; i<m_ScanParam.Size.dwPhyPixels; i++ ){
gray = 0;
bufp = ((u_short *)scanbuf)+i;
for( j=0; j<m_ScanParam.Size.dwPhyLines; j++ ) {
gray += *bufp;
bufp += step;
}
gray = (65535.*1000./(double)param->swGain[0]) * 16384.*j/gray;
a_wWhiteShading[i]= (gray > 65535 ? 65535:gray);
}
memcpy( a_wWhiteShading + m_ScanParam.Size.dwPhyPixels,
a_wWhiteShading, m_ScanParam.Size.dwPhyPixels * 2);
memcpy( a_wWhiteShading + m_ScanParam.Size.dwPhyPixels * 2,
a_wWhiteShading, m_ScanParam.Size.dwPhyPixels * 2);
}
if(usb_HostSwap())
usb_Swap(a_wWhiteShading, m_ScanParam.Size.dwPhyPixels * 2 * 3 );
usb_SaveCalSetShading( dev, &m_ScanParam );
usb_line_statistics( "White", a_wWhiteShading, m_ScanParam.Size.dwPhyPixels,
scan->sParam.bDataType == SCANDATATYPE_Color?1:0);
DBG( _DBG_INFO, "cano_AdjustWhiteShading() done\n" );
return SANE_TRUE;
}
/** the entry function for the CIS calibration stuff.
*/
static int
cano_DoCalibration( Plustek_Device *dev )
{
u_short dpi, idx, idx_end;
u_long save_waf;
SANE_Bool skip_fine;
ScanDef *scan = &dev->scanning;
HWDef *hw = &dev->usbDev.HwSetting;
DCapsDef *scaps = &dev->usbDev.Caps;
if( SANE_TRUE == scan->fCalibrated )
return SANE_TRUE;
DBG( _DBG_INFO, "cano_DoCalibration()\n" );
if( _IS_PLUSTEKMOTOR(hw->motorModel)){
DBG( _DBG_ERROR, "altCalibration can't work with this "
"Plustek motor control setup\n" );
return SANE_FALSE; /* can't cal this */
}
/* Don't allow calibration settings from the other driver to confuse our
* use of a few of its functions.
*/
save_waf = scaps->workaroundFlag;
scaps->workaroundFlag &= ~_WAF_SKIP_WHITEFINE;
scaps->workaroundFlag &= ~_WAF_SKIP_FINE;
scaps->workaroundFlag &= ~_WAF_BYPASS_CALIBRATION;
if( !dev->adj.cacheCalData && !usb_IsSheetFedDevice(dev))
usb_SpeedTest( dev );
/* here we handle that warmup stuff for CCD devices */
if( !usb_AutoWarmup( dev ))
return SANE_FALSE;
/* Set the shading position to undefined */
strip_state = 0;
usb_PrepareCalibration( dev );
usb_SetMCLK( dev, &scan->sParam );
if( !scan->skipCoarseCalib ) {
if( !usb_Wait4ScanSample( dev ))
return SANE_FALSE;
DBG( _DBG_INFO2, "###### ADJUST LAMP (COARSE)#######\n" );
if( cano_PrepareToReadWhiteCal(dev, SANE_TRUE))
return SANE_FALSE;
dev->usbDev.a_bRegs[0x45] &= ~0x10;
if( !cano_AdjustLightsource(dev)) {
DBG( _DBG_ERROR, "Coarse Calibration failed!!!\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "###### ADJUST OFFSET (COARSE) ####\n" );
if(cano_PrepareToReadBlackCal(dev))
return SANE_FALSE;
if( !cano_AdjustOffset(dev)) {
DBG( _DBG_ERROR, "Coarse Calibration failed!!!\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "###### ADJUST GAIN (COARSE)#######\n" );
if(cano_PrepareToReadWhiteCal(dev, SANE_FALSE))
return SANE_FALSE;
if( !cano_AdjustGain(dev)) {
DBG( _DBG_ERROR, "Coarse Calibration failed!!!\n" );
return SANE_FALSE;
}
} else {
strip_state = 1;
DBG( _DBG_INFO2, "###### COARSE calibration skipped #######\n" );
}
skip_fine = SANE_FALSE;
idx_end = 2;
if( dev->adj.cacheCalData || usb_IsSheetFedDevice(dev)) {
skip_fine = usb_FineShadingFromFile(dev);
/* we recalibrate in any case ! */
if( usb_InCalibrationMode(dev)) {
skip_fine = SANE_FALSE;
idx_end = DIVIDER+1;
/* did I say any case? */
if (scan->sParam.bBitDepth != 8) {
skip_fine = SANE_TRUE;
DBG( _DBG_INFO2, "No fine calibration for non-8bit modes!\n" );
}
} else if( usb_IsSheetFedDevice(dev)) {
/* we only do the calibration upon request !*/
if( !skip_fine ) {
DBG( _DBG_INFO2, "SHEET-FED device, skip fine calibration!\n" );
skip_fine = SANE_TRUE;
scaps->workaroundFlag |= _WAF_BYPASS_CALIBRATION;
}
}
}
if( !skip_fine ) {
for( idx = 1; idx < idx_end; idx++ ) {
dpi = 0;
if( usb_InCalibrationMode(dev)) {
dpi = usb_get_res( scaps->OpticDpi.x, idx );
/* we might should check against device specific limit */
if(dpi < 50)
continue;
}
DBG( _DBG_INFO2, "###### ADJUST DARK (FINE) ########\n" );
if(cano_PrepareToReadBlackCal(dev))
return SANE_FALSE;
dev->usbDev.a_bRegs[0x45] |= 0x10;
if( !cano_AdjustDarkShading(dev, dpi)) {
DBG( _DBG_ERROR, "Fine Calibration failed!!!\n" );
return SANE_FALSE;
}
DBG( _DBG_INFO2, "###### ADJUST WHITE (FINE) #######\n" );
if(cano_PrepareToReadWhiteCal(dev, SANE_FALSE))
return SANE_FALSE;
if( !usb_IsSheetFedDevice(dev)) {
if(!usb_ModuleToHome( dev, SANE_TRUE ))
return SANE_FALSE;
if( !usb_ModuleMove(dev, MOVE_Forward,
(u_long)dev->usbDev.pSource->ShadingOriginY)) {
return SANE_FALSE;
}
}
if( !cano_AdjustWhiteShading(dev, dpi)) {
DBG( _DBG_ERROR, "Fine Calibration failed!!!\n" );
return SANE_FALSE;
}
/* force to go back */
strip_state = 0;
}
} else {
DBG( _DBG_INFO2, "###### FINE calibration skipped #######\n" );
dev->usbDev.a_bRegs[0x45] |= 0x10;
strip_state = 2;
m_ScanParam = scan->sParam;
usb_GetPhyPixels( dev, &m_ScanParam );
usb_line_statistics( "Dark", a_wDarkShading, m_ScanParam.Size.dwPhyPixels,
m_ScanParam.bDataType == SCANDATATYPE_Color?1:0);
usb_line_statistics( "White", a_wWhiteShading, m_ScanParam.Size.dwPhyPixels,
m_ScanParam.bDataType == SCANDATATYPE_Color?1:0);
}
/* Lamp on if it's not */
cano_LampOnAfterCalibration(dev);
strip_state = 0;
/* home the sensor after calibration
*/
if( !usb_IsSheetFedDevice(dev))
usb_ModuleToHome( dev, SANE_TRUE );
scan->fCalibrated = SANE_TRUE;
DBG( _DBG_INFO, "cano_DoCalibration() done\n" );
DBG( _DBG_INFO, "-------------------------\n" );
DBG( _DBG_INFO, "Static Gain:\n" );
DBG( _DBG_INFO, "REG[0x3b] = %u\n", dev->usbDev.a_bRegs[0x3b] );
DBG( _DBG_INFO, "REG[0x3c] = %u\n", dev->usbDev.a_bRegs[0x3c] );
DBG( _DBG_INFO, "REG[0x3d] = %u\n", dev->usbDev.a_bRegs[0x3d] );
DBG( _DBG_INFO, "Static Offset:\n" );
DBG( _DBG_INFO, "REG[0x38] = %i\n", dev->usbDev.a_bRegs[0x38] );
DBG( _DBG_INFO, "REG[0x39] = %i\n", dev->usbDev.a_bRegs[0x39] );
DBG( _DBG_INFO, "REG[0x3a] = %i\n", dev->usbDev.a_bRegs[0x3a] );
DBG( _DBG_INFO, "-------------------------\n" );
scaps->workaroundFlag |= save_waf;
return SANE_TRUE;
}
/* END PLUSTEK-USBCAL.C .....................................................*/
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik