kopia lustrzana https://gitlab.com/sane-project/backends
104 wiersze
3.8 KiB
Plaintext
104 wiersze
3.8 KiB
Plaintext
UNIXWARE PORT of SANE - HOWTO build and what you need to run
|
|
|
|
You need a sane SCSI driver to run SANE on Unixware 2.x. There is at
|
|
least one such driver: the sane driver by R=I+S.
|
|
|
|
The Unixware sane driver is a binary loadable module driver for UW2.x.
|
|
Please send Email to wolfgang@rapp-informatik.de to receive.
|
|
|
|
What you need to build xane on Unixware 2.x
|
|
- gnu make
|
|
|
|
You don't need gcc. All is build with the standard Unixware cc and
|
|
libs!!
|
|
|
|
For the X-frontends xscanimage and xsane (separately distributed) you need
|
|
libs like libgtk libgimp and the image libs for jpeg, tiff and png. It is
|
|
also good to have gettext with libintl installed. Most of the libs are
|
|
available on the Skunkware CD's from SCO in pkgadd format. If you build the
|
|
frontends with this libs gimp plugin is also supported by xscanimage and
|
|
xsane. Latest xsane version tested was 0.48.
|
|
|
|
With the following configure should run an build shared libs with
|
|
libtool 1.3.4
|
|
|
|
LD_RUN_PATH=/usr/local/lib CPPFLAGS="-I/usr/local/include -I/isr/X/include" CFLAGS="-I/usr/local/include -I/usr/X/include
|
|
-I/usr/ucbinclude -L/usr/local/lib -L/usr/ucblib -l ucb" LIBS="-lsocket -lnsl -lgen -I/opt/include -L/usr/ucblib -lucb" ./configure
|
|
|
|
After running configure you have to edit the generated file libtool
|
|
|
|
Append to the line
|
|
archive_cmds="\$LD -G -o \$lib \$libobjs \$deplibs \$linkopts
|
|
|
|
so that it looks like this.
|
|
archive_cmds="\$LD -G -o \$lib \$libobjs \$deplibs \$linkopts -B bind_now -L/usr/local/lib -lintl -L/usr/ucblib -lucb -lm"
|
|
|
|
This is a must to link the libucb.a , libintl.a in when the sane libs
|
|
are build.It's also necessary for mathematic lib -lm . Not doing this
|
|
will bring runtime errors like missimg usleep or pow function.
|
|
|
|
ATTENTION:!!! libucb.a of Unixware 2.x has a buggy readdir function so
|
|
it is recommended to remove readdir.o from libucb.a with ar -d
|
|
readdir.o libucb.a Often used and needed functions from libucb.a are
|
|
strncasecmp or getpagesize.
|
|
|
|
If you use -I/usr/ucbinclude it is also a good idea to move
|
|
/usr/ucbinlcude/unistd.h to another file, because it will be included
|
|
first and some sources will not compile.
|
|
|
|
Then you can run make with GNU make.
|
|
|
|
After this say su and then it's good to say
|
|
LD_RUN_PATH=/usr/local/lib export LD_RUN_PATH
|
|
|
|
after this you can install with
|
|
make install
|
|
|
|
Tested on Unixware 2.0.x with Umax Astra 1220S and HP C5100A with
|
|
sane-1.0.1. With Microtek backend earlier on sane-0.74.
|
|
|
|
If you use the net backend you do not need the Unixware sanedrv.
|
|
|
|
The driver is a shareware product.
|
|
|
|
The driver is supplied binary in pkgadd(1m) format and is tested from
|
|
UW2.0x. Please send Email to wolfgang@rapp-informatik.de to get the
|
|
driver in binary pkgadd package.
|
|
|
|
To install it on a Unixware do:
|
|
|
|
cd /tmp
|
|
get sanedrv.pkg.tgz
|
|
gunzip sanedrv.pkg.tgz
|
|
tar xvf sanedrv.pkg.tar
|
|
as root:
|
|
pkgadd -d /tmp/sanedrv
|
|
|
|
Once the driver is installed, there should be a device nodes /dev/sane
|
|
and /dev/scanner /dev/scanner1 for the second, and so on...)
|
|
|
|
The scanner my be connected to any SCSI controller in the system, also
|
|
if you have additional devices like disks or cdroms on the same
|
|
controller. The UW2.x sane driver do not block the controller. The
|
|
scanner must be switched on to be recognized by UW, if the low level
|
|
driver p.e. adsl is loaded.
|
|
|
|
To configure an UMAX scanner, configuration file
|
|
/usr/local/etc/sane.d/umax.conf might contain:
|
|
|
|
/dev/scanner
|
|
|
|
The driver is configured to recognice all scsi scanners with ID
|
|
SCANNER and all HP Scsi scanners with ID Processor and Inquiry string
|
|
starting with "HP" string. For details have a look to
|
|
/etc/conf/pack.d/sane/space.c.
|
|
|
|
If you change this then you must unload the sane driver modadmin -U
|
|
sane, build the new module by /etc/conf/bin/idbuild -M sane and the
|
|
install the driver with modadmin -l sane.
|
|
|
|
If you have questions or problems with the Unixware support in SANE,
|
|
send mail to:
|
|
|
|
wolfgang@rapp-informatik.de
|