kopia lustrzana https://gitlab.com/sane-project/backends
188 wiersze
5.4 KiB
Groff
188 wiersze
5.4 KiB
Groff
.TH sane-fujitsu 5 "17 Apr 2002" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
|
|
.IX sane-fujitsu
|
|
.IX sane-fcpa
|
|
.IX sane-m3096g
|
|
|
|
.SH NAME
|
|
sane-fujitsu \- SANE backend for Fujitsu flatbed and ADF scanners
|
|
|
|
.SH DESCRIPTION
|
|
The
|
|
.B sane-fujitsu
|
|
library implements a SANE (Scanner Access Now Easy) backend which
|
|
provides access to Fujitsu flatbed and ADF scanners.
|
|
At present, the following
|
|
scanners are known to work with this backend:
|
|
.PP
|
|
.RS
|
|
Vendor: Model: Rev:
|
|
.br
|
|
-------- ---------------- -----
|
|
.br
|
|
FUJITSU M3096Gm 02
|
|
.br
|
|
FUJITSU M3093GX
|
|
.br
|
|
FUJITSU M3093GD
|
|
.br
|
|
FUJITSU M4097
|
|
.br
|
|
FUJITSU fi-4220C
|
|
.br
|
|
FUJITSU fi-4340C
|
|
.br
|
|
FUJITSU M3091DCd BF21
|
|
.br
|
|
FUJITSU M3092DCd
|
|
.RE
|
|
.P
|
|
The driver supports lineart, halftone, grayscale, and color
|
|
(3091 and 3092) scanning depending on hardware capabiliites.
|
|
|
|
The "Fujitsu" driver is a first attempt at integrating support
|
|
for all Fujitsu scanners - previously available as different
|
|
single drivers - in one driver. At present, the M3091DCd
|
|
is working (lineart, halftone, 8-bit grayscale and 24-bit color,
|
|
simplex and duplex), and the driver should also support the
|
|
M3096 as the M3096g driver code has been incorporated.
|
|
This driver supersedes the old "m3091"/"fujitsu" drivers and
|
|
the old "m3096g" driver.
|
|
|
|
Other scanners in these families may work.
|
|
The ScanPartner 15C seems to be a repackaging
|
|
of the ScanPartner 600C, but I don't know if it works.
|
|
Look at the sp15c backend for this scanner.
|
|
Perusal of the M3096GX/M3093GX/M3093DG manual
|
|
suggests the M3096G driver offers access to a
|
|
subset of the new scanners.
|
|
People are encouraged to try these driver with the other scanners
|
|
and to contact the author with test results.
|
|
|
|
.SH DUPLEX MODE
|
|
The M3091 driver supports duplex scanning. To the front-end, a duplex
|
|
scan looks very much like scanning two separate pages from the document
|
|
feeder, i.e. the SANE front-end receives two images instead of one.
|
|
Front-ends which are not capable of dealing with that - e.g. the
|
|
command-line tool scanimage - cannot be used for duplex scanning.
|
|
If you want to do duplex scans from the command line, get Tom
|
|
Martone's scanadf program from
|
|
http://www.martoneconsulting.com/sane-scanadf.html.
|
|
|
|
.SH CONFIGURATION
|
|
A modest effort has been made to expose the standard options to the API.
|
|
This allows frontends such as xscanimage to set scanning region,
|
|
resolution, bit-depth (and color), and enable the automatic document feeder.
|
|
.br
|
|
The "Fujitsu" driver supports the following options:
|
|
.br
|
|
mode m
|
|
.RS
|
|
.I m
|
|
may be one of "Color", "Lineart", "Halftone", or "Gray", dependent on the
|
|
scanner model. It is advisable to specify this option first when using
|
|
command line tools, as the validity of some of the other options depends
|
|
on the mode setting.
|
|
.RE
|
|
.PP
|
|
x, y
|
|
.RS
|
|
Scan width and height
|
|
.RE
|
|
.PP
|
|
pagewidth, pageheight
|
|
.RS
|
|
Page size; when using the ADF, the driver will assume that a page of the
|
|
given width is centered
|
|
.RE
|
|
.PP
|
|
resolution, y-resolution
|
|
.RS
|
|
Controls scan resolution. Permissible values dependent on model and scan mode;
|
|
setting --resolution also sets --y-resolution but not vice versa. This makes
|
|
it possible to set the 3091's maximum resolution of 300x600dpi.
|
|
.RE
|
|
.PP
|
|
brightness b
|
|
.RS
|
|
Only supported for M3096
|
|
.RE
|
|
.PP
|
|
treshold t
|
|
.RS
|
|
Only supported for M3096
|
|
.RE
|
|
.PP
|
|
duplex d
|
|
.RS
|
|
.I d
|
|
may be "front", "back", or "both" and denotes which sides of the page
|
|
are to be scanned (duplex scanner only for example 3091, 3093Gd).
|
|
.RE
|
|
.PP
|
|
lampcolor c
|
|
.RS
|
|
.I c
|
|
may be "red", "green", "blue", or "default" - the lamp color to be used
|
|
when doing graysacale or b/w scans on the M3091.
|
|
.RE
|
|
.PP
|
|
blueoffset, greenoffset
|
|
.RS
|
|
Color justification options for the M3091; anything other than +1/-1 will
|
|
probably distort the image. Should be left alone unless your scanner is
|
|
buggy.
|
|
.RE
|
|
.PP
|
|
swapfile
|
|
.RS
|
|
boolean option for the M3091. Only affects duplex scans. If set, a swap
|
|
file will be used for storing the rear side of a document as it is scanned;
|
|
otherwise the whole page will be kept in memory.
|
|
.RE
|
|
|
|
.br
|
|
|
|
You may specify the line "forceModel=xxx"
|
|
in the configuration file to make the driver treat your scanner as an
|
|
"xxx" scanner (currently supported: 3096, 3091). Use this if you have
|
|
another scanner that is not automatically detected as being compatible.
|
|
|
|
.br
|
|
|
|
The only other configuration option supported is "scsi-buf-size=xxx",
|
|
allowing you to set the SCSI buffer size to something other than the
|
|
compiled-in default. Especially with the M3091 scanner, some users
|
|
had the problem that the scanner would "hang" mid-page, and this can
|
|
often be alleviated by using "scsi-buf-size=32768".
|
|
|
|
.SH "SEE ALSO"
|
|
sane(7),
|
|
sane\-scsi(5),
|
|
sane\-sp15c(5)
|
|
sane\-usb(5),
|
|
.br
|
|
Fujitsu ScanPartner 15C OEM Manual, Doc. No. 250-0081-0
|
|
.br
|
|
Fujitsu M3096G OEM Manual, part number 50FH5028E-05
|
|
.br
|
|
Fujitsu M3096GX/M3093GX/M3093DG OEM Manual, part number C150-E015...03
|
|
|
|
.SH AUTHOR
|
|
3096/SP15 drivers: Randolph Bentson
|
|
<bentson@holmsjoen.com>,
|
|
with credit to the unnamed author of the coolscan driver
|
|
.br
|
|
3091 driver: Frederik Ramm <frederik@remote.org>
|
|
3093GD,fi-4340C, ipc and cmp options: Oliver Schirrmeister <oschirr@abm.de>
|
|
3092 patch: Mario Goppold <mgoppold@tbzpariv.tcc-chemnitz.de>
|
|
fi-4220C patch and USB support: Ronald B. Cemer <ron@roncemer.com>
|
|
.SH LIMITATIONS
|
|
Only tested with Linux 2.4
|
|
|
|
.SH BUGS
|
|
I'm sure there are plenty, and not too well hidden,
|
|
but I haven't seen them yet.
|
|
I don't know if the ScanPartner 15C still works, because I'm not able
|
|
to test it.
|
|
3091/3092 don't support halftone
|