sane-project-backends/doc/backend-writing.txt

2001-05-26

When you start writing a backend, please contact the SANE mailing list in
order to add your backend to the PROJECTS file.

Here are a few rules that should help writing a SANE-conformant
backend and including it into the SANE package:


PROGRAMMING
-----------

* Please follow the GNU coding standards.  It's clear that the style
  outlined there is nobody's favorite, but it's much easier to
  maintain SANE if everybody follows more or less the same coding
  style.  It also looks more professional.  The GNU standards can be
  found at:

	http://www.gnu.org/prep/standards_toc.html
	ftp://ftp.gnu.org/pub/gnu/standards/standards.text

  Note that GNU emacs supports automatic indentation according to this
  standard.  The command "indent -gnu" can be used to reformat
  existing sources according to this standard.

* Please be curteous to programmer's with terminals that are 80
  characters wide.  It's not difficult to avoid long lines, so please
  do so.  Note that in ANSI C you can split long strings into pieces
  separated by white space.  For example,
  "this is an awfully long string" can be written as "this is an "
  "awfully long string".

* Please do not depend on compiler specific features or, if you do, make
  the dependency conditional so other compilers will still be able to
  compile the files.  In particular:

    - do not use C++ style comments (//-line comments)

    - do not declare dynamically sized automatic arrays; instead,
      use alloca() after including "../include/lalloca.h".  For example:

		void
		func (int n)
		{
		  char buf[n];
		}

      should be re-written as:

		#ifdef _AIX
		# include "../include/lalloca.h" /* MUST come first for AIX! */
		#endif

		#include "../include/sane/config.h"
		#include "../include/lalloca.h"
			:
		void
		func (int n)
		{
		  char *buf = alloca (n);
		}
    - Don't use any #pragma directives---they're completely
      compiler-dependent.

* If you use headers or libraries that may not be available on all systems,
  write a check for configure.in and include it conditionally. If your backend
  depends on these libraries or headers, compile the backend only if they are 
  available (see pint for an example).

* Use #include ".../include/sane/..." to inlude the sane header files
  instead of #include <sane/...>. Otherwise problems with different installed
  SANE versions may occur. Also this makes clear that the local files are used.

* Don't forget to #include ".../include/sane/config.h" in your backend before
  any other includes. If you use lalloca.h see above for the correct
  includes.

* Include sanei_backend.h after the other includes.

* It's no longer necessary to #define PATH_MAX (now in sanei_backend.h).
  If you define it, do so *after* the system includes.

* Please use sanei functions whenever possible (e.g. 
  sanei_config_read()). This makes porting to other os/platforms much
  easier.

* Do make sure that your code is byte-order independent.  This is
  particularly important for networking-related code and when dealing
  with non-textual data files.

* Don't use printf, fprintf or perror to output debug or error messages.
  Use the DBG macro instead. If your backend can't detect a scanner for
  whatever reason it shouldn't output anything as long as
  SANE_DEBUG_BACKENDNAME isn't set. So don't use DBG(0, ...) in this case.

* Please do not assume that `size_t' is `unsigned int'.  On some
  systems, it's `unsigned long' and the size of this type may be
  bigger than that of an int (this is true for practially any of the
  64-bit systems).  To print a variable of type size_t portably, cast
  the variable to u_long and print it with the %lu specifier.  E.g.:

	size_t len;

	DBG(3, "len=%lu\n", (u_long) len);

* Don't use exit() in your backend. You will exit the whole program, not only
  your backend.

* To support translation of SANE options, please mark the descriptions (desc)
  and title of options with SANE_I18N(). Do the same for string lists used in
  options. The name of options mustn't be marked. This way translation of your
  backend's options is easier. Do *not* mark macros. Especially you don't need
  to mark standard option strings like SANE_TITLE_NUM_OPTIONS as this is
  already done in saneopts.h.

  Example: s->opt[5].title = SANE_I18N("Enhancement");


TESTING
-------

* Please test a backend with "scanimage -T" (plus other options,
  as appropriate/necessary) as this will make sure that sane_read()
  always returns the correct amount of data etc.

* Please test a backend not just with scanimage and xscanimage 
  (+ other frontends), but also with saned.  Based on past experience,
  it is often the case that remote scanning can uncover subtle bugs.
  Note that you don't  have to use two different machines to test "remote"
  scanning---you can use one and the same machine to test a backend via saned
  (just be sure to enable the "net" backend in dll.conf and follow the
  steps described in saned(1)).

* Please make sure that all global symbols exported from a SANE
  backend start with the prefix "sane" or "sanei".  You can
  verify this by running GNU "nm" on the static library.  For
  example:

	nm -g  backend/.libs/libsane-hp.a

  would list all global symbols in the HP backend. "make libcheck"
  in the sane-backends root directory will name all backend libraries,
  that contain "illegal" sysmbols.


DOCUMENTATION
-------------

* Even if you haven't written a man-page for your backend yet, you
  *must* create a .desc file which describes it.  Anytime you submit
  source code for your backend, you should include an update to the
  .desc file which reflects the new state of the backend.

* "template.desc." is a template for new .desc files.  If you'd like
  to try parsing your creation to recreate the sane-backends webpage,
  look at "sane-desc.el" in the tools/ directory or use 
  "make sane-backends.html" in doc/. It may be necessary to adjust the
  Makefile.

* When your backend is included in the SANE distribution, add an entry
  to doc/sane.man, AUTHORS and sane-backends.lsm. The sane.man entry should
  point to your documentation (man-page, website, readme).

* If you want to include READMEs, HTML files or other documentation,
  please create your own directory (doc/backendname) and store your files
  in this directory. If you only have a manual page a subdirectory isn't
  necessary.


INCLUDING INTO CVS
------------------

* If you want to include you backend into CVS use the latest CVS to make
  patches. Check the mailing list and the TODO list for information about
  bugs to avoid.

* If your backend isn't included yet in the SANE CVS tree, write an email to
  the SANE mailing list (sane-devel) and ask for inclusion. Usually one
  of the developpers will check the backend for common mistakes and test
  compilation. If everything is ok the backend will be added to the CVS tree.