kopia lustrzana https://gitlab.com/sane-project/backends
1513 wiersze
62 KiB
C
1513 wiersze
62 KiB
C
/* sane - Scanner Access Now Easy.
|
||
|
||
Copyright (C) 2002 Sergey Vlasov <vsu@altlinux.ru>
|
||
Copyright (C) 2002 - 2004 Henning Meier-Geinitz <henning@meier-geinitz.de>
|
||
|
||
This file is part of the SANE package.
|
||
|
||
This program is free software; you can redistribute it and/or
|
||
modify it under the terms of the GNU General Public License as
|
||
published by the Free Software Foundation; either version 2 of the
|
||
License, or (at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful, but
|
||
WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program; if not, write to the Free Software
|
||
Foundation, Inc., 59 Temple Place - Suite 330, Boston,
|
||
MA 02111-1307, USA.
|
||
|
||
As a special exception, the authors of SANE give permission for
|
||
additional uses of the libraries contained in this release of SANE.
|
||
|
||
The exception is that, if you link a SANE library with other files
|
||
to produce an executable, this does not by itself cause the
|
||
resulting executable to be covered by the GNU General Public
|
||
License. Your use of that executable is in no way restricted on
|
||
account of linking the SANE library code into it.
|
||
|
||
This exception does not, however, invalidate any other reasons why
|
||
the executable file might be covered by the GNU General Public
|
||
License.
|
||
|
||
If you submit changes to SANE to the maintainers to be included in
|
||
a subsequent release, you agree by submitting the changes that
|
||
those changes may be distributed with this exception intact.
|
||
|
||
If you write modifications of your own for SANE, it is your choice
|
||
whether to permit this exception to apply to your modifications.
|
||
If you do not wish that, delete this exception notice.
|
||
*/
|
||
|
||
/* Scanner-specific data */
|
||
|
||
#include "gt68xx_low.h"
|
||
#include "gt68xx_generic.c"
|
||
#include "gt68xx_gt6801.c"
|
||
#include "gt68xx_gt6816.c"
|
||
|
||
static GT68xx_Command_Set mustek_gt6816_command_set = {
|
||
"mustek-gt6816", /* Name of this command set */
|
||
|
||
0x40, /* Request type */
|
||
0x01, /* Request */
|
||
|
||
0x200c, /* Memory read - wValue */
|
||
0x200b, /* Memory write - wValue */
|
||
|
||
0x2010, /* Send normal command - wValue */
|
||
0x3f40, /* Send normal command - wIndex */
|
||
0x2011, /* Receive normal result - wValue */
|
||
0x3f00, /* Receive normal result - wIndex */
|
||
|
||
0x2012, /* Send small command - wValue */
|
||
0x3f40, /* Send small command - wIndex */
|
||
0x2013, /* Receive small result - wValue */
|
||
0x3f00, /* Receive small result - wIndex */
|
||
|
||
/* activate */ NULL,
|
||
/* deactivate */ NULL,
|
||
gt6816_check_firmware,
|
||
gt6816_download_firmware,
|
||
gt6816_get_power_status,
|
||
gt6816_get_ta_status,
|
||
gt6816_lamp_control,
|
||
gt6816_is_moving,
|
||
gt68xx_generic_move_relative,
|
||
gt6816_carriage_home,
|
||
gt68xx_generic_start_scan,
|
||
gt68xx_generic_read_scanned_data,
|
||
gt6816_stop_scan,
|
||
gt6816_setup_scan,
|
||
gt68xx_generic_set_afe,
|
||
gt68xx_generic_set_exposure_time,
|
||
gt68xx_generic_get_id
|
||
};
|
||
|
||
static GT68xx_Command_Set mustek_gt6801_command_set = {
|
||
"mustek-gt6801",
|
||
|
||
|
||
0x40, /* Request type */
|
||
0x01, /* Request */
|
||
|
||
0x200a, /* Memory read - wValue */
|
||
0x2009, /* Memory write - wValue */
|
||
|
||
0x2010, /* Send normal command - wValue */
|
||
0x3f40, /* Send normal command - wIndex */
|
||
0x2011, /* Receive normal result - wValue */
|
||
0x3f00, /* Receive normal result - wIndex */
|
||
|
||
0x2012, /* Send small command - wValue */
|
||
0x3f40, /* Send small command - wIndex */
|
||
0x2013, /* Receive small result - wValue */
|
||
0x3f00, /* Receive small result - wIndex */
|
||
|
||
/* activate */ NULL,
|
||
/* deactivate */ NULL,
|
||
gt6801_check_firmware,
|
||
gt6801_download_firmware,
|
||
gt6801_get_power_status,
|
||
/* get_ta_status (FIXME: implement this) */ NULL,
|
||
gt6801_lamp_control,
|
||
gt6801_is_moving,
|
||
/* gt68xx_generic_move_relative *** to be tested */ NULL,
|
||
gt6801_carriage_home,
|
||
gt68xx_generic_start_scan,
|
||
gt68xx_generic_read_scanned_data,
|
||
gt6801_stop_scan,
|
||
gt6801_setup_scan,
|
||
gt68xx_generic_set_afe,
|
||
gt68xx_generic_set_exposure_time,
|
||
gt68xx_generic_get_id
|
||
};
|
||
|
||
static GT68xx_Command_Set plustek_gt6801_command_set = {
|
||
"plustek-gt6801",
|
||
|
||
0x40, /* Request type */
|
||
0x04, /* Request */
|
||
|
||
0x200a, /* Memory read - wValue */
|
||
0x2009, /* Memory write - wValue */
|
||
|
||
0x2010, /* Send normal command - wValue */
|
||
0x3f40, /* Send normal command - wIndex */
|
||
0x2011, /* Receive normal result - wValue */
|
||
0x3f00, /* Receive normal result - wIndex */
|
||
|
||
0x2012, /* Send small command - wValue */
|
||
0x3f40, /* Send small command - wIndex */
|
||
0x2013, /* Receive small result - wValue */
|
||
0x3f00, /* Receive small result - wIndex */
|
||
|
||
/* activate */ NULL,
|
||
/* deactivate */ NULL,
|
||
gt6801_check_plustek_firmware,
|
||
gt6801_download_firmware,
|
||
gt6801_get_power_status,
|
||
/* get_ta_status (FIXME: implement this) */ NULL,
|
||
gt6801_lamp_control,
|
||
gt6801_is_moving,
|
||
/* gt68xx_generic_move_relative *** to be tested */ NULL,
|
||
gt6801_carriage_home,
|
||
gt68xx_generic_start_scan,
|
||
gt68xx_generic_read_scanned_data,
|
||
gt6801_stop_scan,
|
||
gt6801_setup_scan,
|
||
gt68xx_generic_set_afe,
|
||
/* set_exposure_time */ NULL,
|
||
gt68xx_generic_get_id
|
||
};
|
||
|
||
static GT68xx_Model unknown_model = {
|
||
"unknown-scanner", /* Name */
|
||
"unknown manufacturer", /* Device vendor string */
|
||
"unknown device -- use override to select", /* Device model name */
|
||
"unknown", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{8, 0}, /* possible depths in gray mode */
|
||
{8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (200.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (280.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (9.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */
|
||
/* Standard values for unknown scanner */
|
||
};
|
||
|
||
static GT68xx_Model mustek_2400ta_model = {
|
||
"mustek-bearpaw-2400-ta", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 2400 TA", /* Device model name */
|
||
"A2fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 200, 100, 50, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 200, 100, 50, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.67), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.4), /* Start of scan area in mm (y) */
|
||
SANE_FIX (219.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (298.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.635), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (107.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */
|
||
SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 24, 48, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* flatbed values tested */
|
||
};
|
||
|
||
static GT68xx_Model mustek_2400taplus_model = {
|
||
"mustek-bearpaw-2400-ta-plus", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 2400 TA Plus", /* Device model name */
|
||
"A2Dfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 100, 50, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 100, 50, 0}, /* possible y-resolutions */
|
||
{8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (7.41), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.4), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.5), /* Size of scan area in mm (x) */
|
||
SANE_FIX (298.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (5.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (107.0) /* Start of scan area in TA mode in mm (y) */ ,
|
||
SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 48, 96, /* RGB CCD Line-distance correction in pixel */
|
||
8, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* Setup and tested */
|
||
};
|
||
|
||
static GT68xx_Model mustek_2448taplus_model = {
|
||
"mustek-bearpaw-2448-ta-plus", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 2448 TA Plus", /* Device model name */
|
||
"A2Nfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 200, 100, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 200, 100, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (7.41), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.4), /* Start of scan area in mm (y) */
|
||
SANE_FIX (216.3), /* Size of scan area in mm (x) */
|
||
SANE_FIX (297.5), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (4.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (94.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (105.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (36.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (165.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 48, 96, /* RGB CCD Line-distance correction in pixel */
|
||
8, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */
|
||
/* Based on data from Jakub Dvo?<3F>k <xdvorak@chello.cz>. */
|
||
};
|
||
|
||
static GT68xx_Model mustek_1200ta_model = {
|
||
"mustek-bearpaw-1200-ta", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 1200 TA", /* Device model name */
|
||
"A1fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (8.4), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (220.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (6.9), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (98.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (108.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (37.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (163.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (95.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
32, 16, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x2a, 0x0c, 0x2e, 0x06, 0x2d, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* Setup for 1200 TA */
|
||
};
|
||
|
||
static GT68xx_Model mustek_1200cuplus_model = {
|
||
"mustek-bearpaw-1200-cu-plus", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"Bearpaw 1200 CU Plus", /* Device model name */
|
||
"PS1Dfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (9.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */
|
||
/* Tested by Hamersky Robert r.hamersky at utanet.at */
|
||
};
|
||
|
||
static GT68xx_Model mustek_2400cuplus_model = {
|
||
"mustek-bearpaw-2400-cu-plus", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 2400 CU Plus", /* Device model name */
|
||
"PS2Dfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 200, 150, 100, 50, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 200, 150, 100, 50, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (2.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (300.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (5.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x1a, 0x16, 0x15, 0x08, 0x0e, 0x02}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* Setup and tested */
|
||
};
|
||
|
||
/* Seems that Mustek ScanExpress 1200 UB Plus, the Mustek BearPaw 1200 CU
|
||
* and lots of other scanners have the same USB identifier.
|
||
*/
|
||
static GT68xx_Model mustek_1200cu_model = {
|
||
"mustek-bearpaw-1200-cu", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 1200 CU", /* Device model name */
|
||
"PS1fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
600, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (4.2), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x13, 0x04, 0x15, 0x06, 0x0f, 0x02}, /* Default offset/gain */
|
||
{0x123, 0x137, 0x116}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* Setup and tested */
|
||
};
|
||
|
||
static GT68xx_Model mustek_scanexpress1200ubplus_model = {
|
||
"mustek-scanexpress-1200-ub-plus", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"ScanExpress 1200 UB Plus", /* Device model name */
|
||
"SBfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (15.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (6.5), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* Setup and tested */
|
||
};
|
||
|
||
static GT68xx_Model mustek_scanexpress1248ub_model = {
|
||
"mustek-scanexpress-1248-ub", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"ScanExpress 1248 UB", /* Device model name */
|
||
"SBSfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (217.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (9.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_NO_STOP /* Which flags are needed for this scanner? */
|
||
/* Completely untested, seems to use gt6816 CIS, details unknown */
|
||
};
|
||
|
||
|
||
static GT68xx_Model artec_ultima2000_model = {
|
||
"artec-ultima-2000", /* Name */
|
||
"Artec", /* Device vendor string */
|
||
"Ultima 2000", /* Device model name */
|
||
"Gt680xfw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
600, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */
|
||
{600, 300, 200, 150, 100, 75, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (2.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_MIRROR_X | GT68XX_FLAG_MOTOR_HOME | GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* Setup for Cytron TCM MD 9385 */
|
||
};
|
||
|
||
static GT68xx_Model mustek_2400cu_model = {
|
||
"mustek-bearpaw-2400-cu", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"BearPaw 2400 CU", /* Device model name */
|
||
"PS2fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
2400, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 150, 100, 50, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (13.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (215.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (296.9), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (5.5), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.9), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x0f, 0x01, 0x15, 0x06, 0x13, 0x04}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* basically tested, details may need tweaking */
|
||
};
|
||
|
||
static GT68xx_Model mustek_scanexpress2400usb_model = {
|
||
"mustek-scanexpress-2400-usb", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"ScanExpress 2400 USB", /* Device model name */
|
||
"P9fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 100, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 100, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (5.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (12.0), /* Start of scan area in mm (y) */
|
||
SANE_FIX (224.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (300.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (7.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
24, 12, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x12, 0x06, 0x0e, 0x03, 0x19, 0x25}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_UNTESTED | GT68XX_FLAG_SE_2400 /* Which flags are needed for this scanner? */
|
||
/* only partly tested, from "Fan Dan" <dan_fancn@hotmail.com> */
|
||
};
|
||
|
||
static GT68xx_Model mustek_a3usb_model = {
|
||
"mustek-scanexpress-a3-usb", /* Name */
|
||
"Mustek", /* Device vendor string */
|
||
"ScanExpress A3 USB", /* Device model name */
|
||
"A32fw.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
300, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
300, /* base x-res used to calculate geometry */
|
||
300, /* base y-res used to calculate geometry */
|
||
300, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (7.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (11.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (297.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (433.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (2.4), /* Start of white strip in mm (y) */
|
||
SANE_FIX (4.6), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 5, 5, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x14, 0x05, 0x12, 0x05, 0x17, 0x0c}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_CIS_LAMP | GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* Tested by hmg. This scanner is a bit strange as it uses a CIS sensor but
|
||
it also has a lamp. So the lamp needs to be heated and CCD calibration
|
||
needs to be used but CIS mode must be used for scanning. There is no TA
|
||
for that scanner*/
|
||
};
|
||
|
||
static GT68xx_Model lexmark_x73_model = {
|
||
"lexmark-x73", /* Name */
|
||
"Lexmark", /* Device vendor string */
|
||
"X73", /* Device model name */
|
||
"OSLO3071b2.usb", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{16, 12, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (6.519), /* Start of scan area in mm (x) */
|
||
SANE_FIX (12.615), /* Start of scan area in mm (y) */
|
||
SANE_FIX (220.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (297.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (1.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (0.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
32, 16, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x14, 0x07, 0x14, 0x07, 0x14, 0x07}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
0 /* Which flags are needed for this scanner? */
|
||
/* When using automatic gain pictures are too dark. Only some ad hoc tests for
|
||
lexmark x70 were done so far. WARNING: Don't use the Full scan option
|
||
with the above settings, otherwise the sensor may bump at the end of
|
||
the sledge and the scanner may be damaged! */
|
||
};
|
||
|
||
static GT68xx_Model plustek_op1248u_model = {
|
||
"plustek-op1248u", /* Name */
|
||
"Plustek", /* Device vendor string */
|
||
"OpticPro 1248U", /* Device model name */
|
||
"ccd548.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&plustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x1e, 0x24, 0x1d, 0x1f, 0x1d, 0x20}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* tested */
|
||
};
|
||
|
||
static GT68xx_Model plustek_u16b_model = {
|
||
"plustek-u16b", /* Name */
|
||
"Plustek", /* Device vendor string */
|
||
"OpticPro U16B", /* Device model name */
|
||
"ccd68861.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
2400, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{16, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (5.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (8.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (216.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x18, 0x16, 0x16, 0x0f, 0x17, 0x11}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_NO_POWER_STATUS | GT68XX_FLAG_NO_LINEMODE
|
||
/* Which flags are needed for this scanner? */
|
||
/* Tested with a U16B by Henning Meier-Geinitz. 600 dpi is maximum
|
||
vertically. 600 dpi 16 bit doesn't work. Line mode does not work. That's a hardware/firmware
|
||
issue. */
|
||
};
|
||
|
||
static GT68xx_Model genius_vivid4_model = {
|
||
"genius-colorpage-vivid4", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"ColorPage Vivid 4", /* Device model name */
|
||
"ccd68861.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
2400, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{16, 8, 0}, /* possible depths in gray mode */
|
||
{16, 12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (5.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (8.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (216.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x18, 0x16, 0x16, 0x0f, 0x17, 0x11}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_NO_POWER_STATUS| GT68XX_FLAG_NO_LINEMODE
|
||
/* Which flags are needed for this scanner? */
|
||
/* This scanner seems to be very similar to Plustelk U16B and is reported to work. */
|
||
};
|
||
|
||
|
||
static GT68xx_Model genius_vivid3x_model = {
|
||
"genius-colorpage-vivid3x", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"Colorpage Vivid3x", /* Device model name */
|
||
"ccd548.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&plustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* Tested to some degree, based on the Plustek OpticPro 1248U*/
|
||
};
|
||
|
||
static GT68xx_Model genius_vivid4x_model = {
|
||
"genius-colorpage-vivid4x", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"Colorpage Vivid4x", /* Device model name */
|
||
"ccd548.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_UNTESTED /* Which flags are needed for this scanner? */
|
||
/* Mostly untested, copied from 3x, some values from Claudio Filho <filhocf@openoffice.org> */
|
||
};
|
||
|
||
static GT68xx_Model genius_vivid4xe_model = {
|
||
"genius-colorpage-vivid4xe", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"Colorpage Vivid4xe", /* Device model name */
|
||
"ccd548.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* tested a bit */
|
||
};
|
||
|
||
static GT68xx_Model genius_vivid3xe_model = {
|
||
"genius-colorpage-vivid3xe", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"Colorpage Vivid3xe", /* Device model name */
|
||
"ccd548.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&plustek_gt6801_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV /* Which flags are needed for this scanner? */
|
||
/* mostly untested, based on the Genius Vivid3x */
|
||
};
|
||
|
||
static GT68xx_Model genius_vivid1200xe_model = {
|
||
"genius-colorpage-vivid-1200-xe", /* Name */
|
||
"Genius", /* Device vendor string */
|
||
"Colorpage Vivid 1200 XE", /* Device model name */
|
||
"ccd569.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
600, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
50, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_TRUE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 0}, /* possible x-resolutions */
|
||
{600, 300, 150, 75, 0}, /* possible y-resolutions */
|
||
{12, 8, 0}, /* possible depths in gray mode */
|
||
{12, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (3.5), /* Start of scan area in mm (x) */
|
||
SANE_FIX (7.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (1.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 8, 16, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
|
||
{0x1c, 0x29, 0x1c, 0x2c, 0x1c, 0x2b}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_FALSE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_OFFSET_INV | GT68XX_FLAG_UNTESTED /* Which flags are needed for this scanner? */
|
||
/* untested */
|
||
};
|
||
|
||
static GT68xx_Model plustek_opticslim1200_model = {
|
||
"plustek-opticslim-1200", /* Name */
|
||
"Plustek", /* Device vendor string */
|
||
"OpticSlim 1200", /* Device model name */
|
||
"cism216.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
600, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
600, /* base x-res used to calculate geometry */
|
||
600, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 8, 0}, /* possible depths in gray mode */
|
||
{16, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (1.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (9.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (140.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
0
|
||
};
|
||
|
||
static GT68xx_Model plustek_opticslim2400_model = {
|
||
"plustek-opticslim-2400", /* Name */
|
||
"Plustek", /* Device vendor string */
|
||
"OpticSlim 2400", /* Device model name */
|
||
"cis3R5B1.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
2400, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
2400, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{2400, 1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 8, 0}, /* possible depths in gray mode */
|
||
{16, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (1.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (9.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (140.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_UNTESTED
|
||
};
|
||
/* By Detlef Gausepohl <detlef at sunrise.psycho.rwth-aachen.de> */
|
||
|
||
static GT68xx_Model visioneer_onetouch_7300_model = {
|
||
"visioneer-onetouch-7300", /* Name */
|
||
"Visioneer", /* Device vendor string */
|
||
"OneTouch 7300", /* Device model name */
|
||
"Cis3r5b1.fw", /* Name of the firmware file */
|
||
SANE_FALSE, /* Dynamic allocation flag */
|
||
|
||
&mustek_gt6816_command_set, /* Command set used by this scanner */
|
||
|
||
1200, /* maximum optical sensor resolution */
|
||
1200, /* maximum motor resolution */
|
||
1200, /* base x-res used to calculate geometry */
|
||
1200, /* base y-res used to calculate geometry */
|
||
1200, /* if ydpi is equal or higher, use linemode */
|
||
1200, /* if ydpi is equal or higher, disable backtracking */
|
||
SANE_FALSE, /* Use base_ydpi for all resolutions */
|
||
|
||
{1200, 600, 300, 150, 75, 50, 0}, /* possible x-resolutions */
|
||
{1200, 1200, 600, 300, 150, 75, 50, 0}, /* possible y-resolutions */
|
||
{16, 8, 0}, /* possible depths in gray mode */
|
||
{16, 8, 0}, /* possible depths in color mode */
|
||
|
||
SANE_FIX (1.0), /* Start of scan area in mm (x) */
|
||
SANE_FIX (9.5), /* Start of scan area in mm (y) */
|
||
SANE_FIX (218.0), /* Size of scan area in mm (x) */
|
||
SANE_FIX (299.0), /* Size of scan area in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in mm (y) */
|
||
SANE_FIX (140.0), /* Start of black mark in mm (x) */
|
||
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
|
||
SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
|
||
SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
|
||
|
||
SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
|
||
|
||
0, 0, 0, /* RGB CCD Line-distance correction in pixel */
|
||
0, /* CCD distcance for CCD with 6 lines) */
|
||
|
||
COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
|
||
{0x15, 0x09, 0x18, 0x11, 0x16, 0x0c}, /* Default offset/gain */
|
||
{0x157, 0x157, 0x157}, /* Default exposure parameters */
|
||
SANE_FIX (2.0), /* Default gamma value */
|
||
|
||
SANE_TRUE, /* Is this a CIS scanner? */
|
||
GT68XX_FLAG_UNTESTED
|
||
};
|
||
/* Untested. Based on Plustek OpticPro 2400. */
|
||
|
||
|
||
static GT68xx_USB_Device_Entry gt68xx_usb_device_list[] = {
|
||
{0x10000, 0x10000, &unknown_model}, /* used for yet unknown scanners */
|
||
{0x055f, 0x0218, &mustek_2400ta_model},
|
||
{0x055f, 0x0219, &mustek_2400taplus_model},
|
||
{0x055f, 0x021c, &mustek_1200cuplus_model},
|
||
{0x055f, 0x021b, &mustek_1200cuplus_model}, /* Different id? New */
|
||
{0x055f, 0x021d, &mustek_2400cuplus_model},
|
||
{0x055f, 0x021e, &mustek_1200ta_model},
|
||
{0x055f, 0x021f, &mustek_scanexpress1248ub_model},
|
||
{0x05d8, 0x4002, &mustek_1200cu_model},
|
||
{0x05d8, 0x4002, &mustek_scanexpress1200ubplus_model}, /* manual override */
|
||
{0x05d8, 0x4002, &artec_ultima2000_model}, /* manual override */
|
||
{0x05d8, 0x4002, &mustek_2400cu_model}, /* manual override */
|
||
{0x05d8, 0x4002, &mustek_scanexpress2400usb_model}, /* manual override */
|
||
{0x055f, 0x0210, &mustek_a3usb_model},
|
||
{0x055f, 0x021a, &mustek_2448taplus_model},
|
||
{0x043d, 0x002d, &lexmark_x73_model},
|
||
{0x07b3, 0x0400, &plustek_op1248u_model},
|
||
{0x07b3, 0x0401, &plustek_op1248u_model}, /* Same scanner, different id? */
|
||
{0x07b3, 0x0402, &plustek_u16b_model},
|
||
{0x07b3, 0x0403, &plustek_u16b_model}, /* two ids? 403 seems to be more common */
|
||
{0x07b3, 0x0413, &plustek_opticslim1200_model},
|
||
{0x07b3, 0x0422, &plustek_opticslim2400_model},
|
||
{0x0458, 0x2011, &genius_vivid3x_model},
|
||
{0x0458, 0x2014, &genius_vivid4_model},
|
||
{0x0458, 0x2017, &genius_vivid3xe_model},
|
||
{0x0458, 0x201a, &genius_vivid4xe_model},
|
||
{0x0458, 0x201b, &genius_vivid4x_model},
|
||
{0x0458, 0x201f, &genius_vivid1200xe_model},
|
||
{0x04a7, 0x0444, &visioneer_onetouch_7300_model},
|
||
{0, 0, NULL}
|
||
};
|