kopia lustrzana https://gitlab.com/sane-project/backends
233 wiersze
6.3 KiB
Plaintext
233 wiersze
6.3 KiB
Plaintext
# artec_eplus48u - SANE Backend configuration file
|
|
# For use with the Artec E+ 48U scanner
|
|
# This scanner is also sold as
|
|
# Tevion MD 9693, Medion MD 9705, Medion MD 9693,
|
|
# Trust Easy Webscan 19200, Memorex Mem 48U or Umax AstraSlim SE.
|
|
#
|
|
# The USB section:
|
|
# each device needs at least the following line:
|
|
# usb vendor-ID and product-ID
|
|
# Every device configuration in this file must begin with an usb entry.
|
|
usb 0x05d8 0x4003
|
|
|
|
#
|
|
# Path to the firmware file
|
|
# This file comes with the Windows driver
|
|
# The scanner won't work without it
|
|
#
|
|
|
|
option artecFirmwareFile <path>/Artec48.usb
|
|
|
|
#
|
|
# for adjusting the default gamma values
|
|
#
|
|
|
|
option redGamma 1.0
|
|
option greenGamma 1.0
|
|
option blueGamma 1.0
|
|
option masterGamma 1.9
|
|
|
|
#Use this options to set the default offset and exposure time values.
|
|
|
|
option redOffset 0x28
|
|
option greenOffset 0x2f
|
|
option blueOffset 0x2f
|
|
option redExposure 0xa7
|
|
option greenExposure 0x116
|
|
option blueExposure 0xdc
|
|
|
|
# The vendor and model string
|
|
# This string is displayed by the frontends. If you do not want to get your
|
|
# scanner reported as "Artec E+ 48U", then change the option accordingly.
|
|
|
|
option vendorString "Artec"
|
|
option modelString "E+ 48U"
|
|
|
|
#
|
|
# device-name
|
|
#
|
|
# If autodetection does not work, then you can specify the device here
|
|
# The device entry must be the last one in this config file (or the last one before a
|
|
# new usb entry).
|
|
|
|
#If you are using libusb, a device looks like this:
|
|
#device libusb:001:002
|
|
|
|
#If you are using the scanner module (kernel driver), a device looks like this:
|
|
#device /dev/usbscanner
|
|
|
|
|
|
# Another USB section:
|
|
# each device needs at least the following line:
|
|
# usb vendor-ID and product-ID
|
|
# Every device configuration in this file must begin with an usb entry.
|
|
# Since the Trust Easy Webscan 19200 uses a different product id, we add
|
|
# another usb section here.
|
|
|
|
usb 0x05d8 0x4006
|
|
|
|
#
|
|
# Path to the firmware file
|
|
# This file comes with the Windows driver
|
|
# The scanner won't work without it
|
|
#
|
|
|
|
option artecFirmwareFile <path>/Artec48.usb
|
|
|
|
#
|
|
# for adjusting the default gamma values
|
|
#
|
|
|
|
option redGamma 1.0
|
|
option greenGamma 1.0
|
|
option blueGamma 1.0
|
|
option masterGamma 1.9
|
|
|
|
#Use this options to set the default offset and exposure time values.
|
|
#If calibrate device is set to 0, this values are used instead of the values
|
|
#which were calculated during calibration.
|
|
|
|
option redOffset 0x28
|
|
option greenOffset 0x2f
|
|
option blueOffset 0x2f
|
|
option redExposure 0xa7
|
|
option greenExposure 0x116
|
|
option blueExposure 0xdc
|
|
|
|
# The vendor and model string
|
|
# This string is displayed by the frontends. The Trust Easy Webscan 19200
|
|
# has a different product id, therefore we can overwrite the vendor and model
|
|
# string here.
|
|
|
|
option vendorString "Trust"
|
|
option modelString "Easy Webscan 19200"
|
|
|
|
#
|
|
# device-name
|
|
#
|
|
# If autodetection does not work, then you can specify the device here
|
|
# The device entry must be the last one in this config file (or the last one before a
|
|
# new usb entry).
|
|
|
|
#If you are using libusb, a device looks like this:
|
|
#device libusb:001:002
|
|
|
|
#If you are using the scanner module (kernel driver), a device looks like this:
|
|
#device /dev/usbscanner
|
|
|
|
# Another USB section:
|
|
# each device needs at least the following line:
|
|
# usb vendor-ID and product-ID
|
|
# Every device configuration in this file must begin with an usb entry.
|
|
# Since the Memorex Mem48U uses a different product id, we add
|
|
# another usb section here.
|
|
|
|
usb 0x05d8 0x4005
|
|
|
|
#
|
|
# Path to the firmware file
|
|
# This file comes with the Windows driver
|
|
# The scanner won't work without it
|
|
#
|
|
|
|
option artecFirmwareFile <path>/Artec48.usb
|
|
|
|
#
|
|
# for adjusting the default gamma values
|
|
#
|
|
|
|
option redGamma 1.0
|
|
option greenGamma 1.0
|
|
option blueGamma 1.0
|
|
option masterGamma 1.9
|
|
|
|
#Use this options to set the default offset and exposure time values.
|
|
#If calibrate device is set to 0, this values are used instead of the values
|
|
#which were calculated during calibration.
|
|
|
|
option redOffset 0x28
|
|
option greenOffset 0x2f
|
|
option blueOffset 0x2f
|
|
option redExposure 0xa7
|
|
option greenExposure 0x116
|
|
option blueExposure 0xdc
|
|
|
|
# The vendor and model string
|
|
# This string is displayed by the frontends. The Umax AstraSlim SE
|
|
# has a different product id, therefore we can overwrite the vendor and model
|
|
# string here.
|
|
|
|
option vendorString "Memorex"
|
|
option modelString "MEM 48U"
|
|
|
|
#
|
|
# device-name
|
|
#
|
|
# If autodetection does not work, then you can specify the device here
|
|
# The device entry must be the last one in this config file (or the last one before a
|
|
# new usb entry).
|
|
|
|
#If you are using libusb, a device looks like this:
|
|
#device libusb:001:002
|
|
|
|
#If you are using the scanner module (kernel driver), a device looks like this:
|
|
#device /dev/usbscanner
|
|
|
|
# Another USB section:
|
|
# each device needs at least the following line:
|
|
# usb vendor-ID and product-ID
|
|
# Every device configuration in this file must begin with an usb entry.
|
|
# Since the Umax AstraSlim SE uses a different product id, we add
|
|
# another usb section here.
|
|
|
|
usb 0x05d8 0x4009
|
|
|
|
#
|
|
# Path to the firmware file
|
|
# This file comes with the Windows driver
|
|
# The scanner won't work without it
|
|
#
|
|
|
|
option artecFirmwareFile <path>/Artec48.usb
|
|
|
|
#
|
|
# for adjusting the default gamma values
|
|
#
|
|
|
|
option redGamma 1.0
|
|
option greenGamma 1.0
|
|
option blueGamma 1.0
|
|
option masterGamma 1.9
|
|
|
|
#Use this options to set the default offset and exposure time values.
|
|
#If calibrate device is set to 0, this values are used instead of the values
|
|
#which were calculated during calibration.
|
|
|
|
option redOffset 0x28
|
|
option greenOffset 0x2f
|
|
option blueOffset 0x2f
|
|
option redExposure 0xa7
|
|
option greenExposure 0x116
|
|
option blueExposure 0xdc
|
|
|
|
# The vendor and model string
|
|
# This string is displayed by the frontends. The Umax AstraSlim SE
|
|
# has a different product id, therefore we can overwrite the vendor and model
|
|
# string here.
|
|
|
|
option vendorString "Umax"
|
|
option modelString "AstraSlim SE"
|
|
|
|
#
|
|
# device-name
|
|
#
|
|
# If autodetection does not work, then you can specify the device here
|
|
# The device entry must be the last one in this config file (or the last one before a
|
|
# new usb entry).
|
|
|
|
#If you are using libusb, a device looks like this:
|
|
#device libusb:001:002
|
|
|
|
#If you are using the scanner module (kernel driver), a device looks like this:
|
|
#device /dev/usbscanner
|