kopia lustrzana https://gitlab.com/sane-project/backends
526 wiersze
16 KiB
C
526 wiersze
16 KiB
C
/* sane - Scanner Access Now Easy.
|
|
Copyright (C) 2001, 2002 Henning Meier-Geinitz
|
|
Copyright (C) 2003, 2005 Rene Rebe (sanei_read_int,sanei_set_timeout)
|
|
Copyright (C) 2008 m. allan noah (sanei_usb_clear_halt)
|
|
Copyright (C) 2011 Reinhold Kainhofer (sanei_usb_set_endpoint)
|
|
This file is part of the SANE package.
|
|
|
|
SANE is free software; you can redistribute it and/or modify it
|
|
under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
SANE is distributed in the hope that it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with sane; see the file COPYING. If not, write to the Free
|
|
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
As a special exception, the authors of SANE give permission for
|
|
additional uses of the libraries contained in this release of SANE.
|
|
|
|
The exception is that, if you link a SANE library with other files
|
|
to produce an executable, this does not by itself cause the
|
|
resulting executable to be covered by the GNU General Public
|
|
License. Your use of that executable is in no way restricted on
|
|
account of linking the SANE library code into it.
|
|
|
|
This exception does not, however, invalidate any other reasons why
|
|
the executable file might be covered by the GNU General Public
|
|
License.
|
|
|
|
If you submit changes to SANE to the maintainers to be included in
|
|
a subsequent release, you agree by submitting the changes that
|
|
those changes may be distributed with this exception intact.
|
|
|
|
If you write modifications of your own for SANE, it is your choice
|
|
whether to permit this exception to apply to your modifications.
|
|
If you do not wish that, delete this exception notice.
|
|
*/
|
|
|
|
/** @file sanei_usb.h
|
|
* This file provides a generic USB interface.
|
|
*
|
|
* Currently, two access methods to USB devices are provided:
|
|
* - Access to device
|
|
* files as used by the Linux kernel USB scanner driver is supported. FreeBSD
|
|
* and OpenBSD with their uscanner drivers also work this way. However,
|
|
* detection and control messages aren't supported on these platforms.
|
|
* - Access using libusb (where available).
|
|
*
|
|
* A general remark: Do not mix sanei_usb functions with "normal" file-related
|
|
* libc functions like open() or close. The device numbers used in sanei_usb
|
|
* are not file descriptors.
|
|
*
|
|
* @sa sanei_lm983x.h, sanei_pa4s2.h, sanei_pio.h, sanei_scsi.h, and <a
|
|
* href="http://www.sane-project.org/man/sane-usb.5.html">man sane-usb(5)</a>
|
|
* for user-oriented documentation
|
|
*/
|
|
|
|
#ifndef sanei_usb_h
|
|
#define sanei_usb_h
|
|
|
|
#include "../include/sane/config.h"
|
|
#include "../include/sane/sane.h"
|
|
|
|
#include <stdlib.h> /* for size_t */
|
|
|
|
/* USB spec defines */
|
|
#ifndef USB_CLASS_PER_INTERFACE
|
|
/* Also defined in libusb */
|
|
/** @name Device and/or interface class codes */
|
|
/* @{ */
|
|
#define USB_CLASS_PER_INTERFACE 0x00
|
|
#define USB_CLASS_AUDIO 0x01
|
|
#define USB_CLASS_COMM 0x02
|
|
#define USB_CLASS_HID 0x03
|
|
#define USB_CLASS_PRINTER 0x07
|
|
#define USB_CLASS_MASS_STORAGE 0x08
|
|
#define USB_CLASS_HUB 0x09
|
|
#define USB_CLASS_DATA 0x0a
|
|
#define USB_CLASS_VENDOR_SPEC 0xff
|
|
/* @} */
|
|
|
|
/** @name USB descriptor types */
|
|
/* @{ */
|
|
#define USB_DT_DEVICE 0x01
|
|
#define USB_DT_CONFIG 0x02
|
|
#define USB_DT_STRING 0x03
|
|
#define USB_DT_INTERFACE 0x04
|
|
#define USB_DT_ENDPOINT 0x05
|
|
#define USB_DT_HID 0x21
|
|
#define USB_DT_REPORT 0x22
|
|
#define USB_DT_PHYSICAL 0x23
|
|
#define USB_DT_HUB 0x29
|
|
/* @} */
|
|
|
|
/** @name Descriptor sizes per descriptor type */
|
|
/* @{ */
|
|
#define USB_DT_DEVICE_SIZE 18
|
|
#define USB_DT_CONFIG_SIZE 9
|
|
#define USB_DT_INTERFACE_SIZE 9
|
|
#define USB_DT_ENDPOINT_SIZE 7
|
|
#define USB_DT_ENDPOINT_AUDIO_SIZE 9
|
|
#define USB_DT_HUB_NONVAR_SIZE 7
|
|
/* @} */
|
|
|
|
/** @name Endpoint descriptors */
|
|
/* @{ */
|
|
#define USB_ENDPOINT_ADDRESS_MASK 0x0f
|
|
#define USB_ENDPOINT_DIR_MASK 0x80
|
|
#define USB_ENDPOINT_TYPE_MASK 0x03
|
|
#define USB_ENDPOINT_TYPE_CONTROL 0
|
|
#define USB_ENDPOINT_TYPE_ISOCHRONOUS 1
|
|
#define USB_ENDPOINT_TYPE_BULK 2
|
|
#define USB_ENDPOINT_TYPE_INTERRUPT 3
|
|
/* @} */
|
|
|
|
/** @name Standard requests */
|
|
/* @{ */
|
|
#define USB_REQ_GET_STATUS 0x00
|
|
#define USB_REQ_CLEAR_FEATURE 0x01
|
|
#define USB_REQ_SET_FEATURE 0x03
|
|
#define USB_REQ_SET_ADDRESS 0x05
|
|
#define USB_REQ_GET_DESCRIPTOR 0x06
|
|
#define USB_REQ_SET_DESCRIPTOR 0x07
|
|
#define USB_REQ_GET_CONFIGURATION 0x08
|
|
#define USB_REQ_SET_CONFIGURATION 0x09
|
|
#define USB_REQ_GET_INTERFACE 0x0A
|
|
#define USB_REQ_SET_INTERFACE 0x0B
|
|
#define USB_REQ_SYNCH_FRAME 0x0C
|
|
/* @} */
|
|
|
|
/** @name USB types */
|
|
/* @{ */
|
|
#define USB_TYPE_STANDARD (0x00 << 5)
|
|
#define USB_TYPE_CLASS (0x01 << 5)
|
|
#define USB_TYPE_VENDOR (0x02 << 5)
|
|
#define USB_TYPE_RESERVED (0x03 << 5)
|
|
/* @} */
|
|
|
|
/** @name USB recipients */
|
|
/* @{ */
|
|
#define USB_RECIP_DEVICE 0x00
|
|
#define USB_RECIP_INTERFACE 0x01
|
|
#define USB_RECIP_ENDPOINT 0x02
|
|
#define USB_RECIP_OTHER 0x03
|
|
/* @} */
|
|
|
|
#endif /* not USB_CLASS_PER_INTERFACE */
|
|
|
|
/* Not defined in libsub */
|
|
/** @name USB Masks */
|
|
/* @{ */
|
|
#define USB_TYPE_MASK (0x03 << 5)
|
|
#define USB_RECIP_MASK 0x1f
|
|
/* @} */
|
|
|
|
/** @name USB directions */
|
|
/* @{ */
|
|
#define USB_DIR_OUT 0x00
|
|
#define USB_DIR_IN 0x80
|
|
/* @} */
|
|
|
|
/** */
|
|
struct sanei_usb_dev_descriptor
|
|
{
|
|
SANE_Byte desc_type;
|
|
unsigned int bcd_usb;
|
|
unsigned int bcd_dev;
|
|
SANE_Byte dev_class;
|
|
SANE_Byte dev_sub_class;
|
|
SANE_Byte dev_protocol;
|
|
SANE_Byte max_packet_size;
|
|
};
|
|
|
|
/** Initialize sanei_usb.
|
|
*
|
|
* Call this before any other sanei_usb function.
|
|
*/
|
|
extern void sanei_usb_init (void);
|
|
|
|
/** End sanei_usb use, freeing resources when needed.
|
|
*
|
|
* When the use count of sanei_usb reach 0, free resources and end
|
|
* sanei_usb use.
|
|
*/
|
|
extern void sanei_usb_exit (void);
|
|
|
|
/** Search for USB devices.
|
|
*
|
|
* Search USB busses for scanner devices.
|
|
*/
|
|
extern void sanei_usb_scan_devices (void);
|
|
|
|
/** Get the vendor and product ids by device name.
|
|
*
|
|
* @param devname
|
|
* @param vendor vendor id
|
|
* @param product product id
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - if the ids could be determined
|
|
* - SANE_STATUS_INVAL - if the device is not found
|
|
* - SANE_STATUS_UNSUPPORTED - if this method is not supported with the current
|
|
* access method
|
|
*/
|
|
SANE_Status
|
|
sanei_usb_get_vendor_product_byname (SANE_String_Const devname,
|
|
SANE_Word * vendor, SANE_Word * product);
|
|
|
|
/** Get the vendor and product ids.
|
|
*
|
|
* Currently, only libusb devices and scanners supported by the Linux USB
|
|
* scanner module can be found. For the latter method, the Linux version
|
|
* must be 2.4.8 or higher.
|
|
*
|
|
* @param dn device number of an already sanei_usb_opened device
|
|
* @param vendor vendor id
|
|
* @param product product id
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - if the ids could be determined
|
|
* - SANE_STATUS_UNSUPPORTED - if the OS doesn't support detection of ids
|
|
*/
|
|
extern SANE_Status
|
|
sanei_usb_get_vendor_product (SANE_Int dn, SANE_Word * vendor,
|
|
SANE_Word * product);
|
|
|
|
/** Find devices that match given vendor and product ids.
|
|
*
|
|
* For limitations, see function sanei_usb_get_vendor_product().
|
|
* The function attach is called for every device which has been found.
|
|
*
|
|
* @param vendor vendor id
|
|
* @param product product id
|
|
* @param attach attach function
|
|
*
|
|
* @return SANE_STATUS_GOOD - on success (even if no scanner was found)
|
|
*/
|
|
extern SANE_Status
|
|
sanei_usb_find_devices (SANE_Int vendor, SANE_Int product,
|
|
SANE_Status (*attach) (SANE_String_Const devname));
|
|
|
|
/** Open a USB device.
|
|
*
|
|
* The device is opened by its name devname and the device number is
|
|
* returned in dn on success.
|
|
*
|
|
* Device names can be either device file names for direct access over
|
|
* kernel drivers (like /dev/usb/scanner) or libusb names. The libusb format
|
|
* looks like this: "libusb:bus-id:device-id". Bus-id and device-id are
|
|
* platform-dependent. An example could look like this: "libusb:001:002"
|
|
* (Linux).
|
|
*
|
|
* @param devname name of the device to open
|
|
* @param dn device number
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on success
|
|
* - SANE_STATUS_ACCESS_DENIED - if the file couldn't be accessed due to
|
|
* permissions
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*/
|
|
extern SANE_Status sanei_usb_open (SANE_String_Const devname, SANE_Int * dn);
|
|
|
|
/** Set the endpoint for the USB communication
|
|
*
|
|
* Allows to switch to a different endpoint for the USB communication than
|
|
* the default (auto-detected) endpoint. This function can only be called
|
|
* after sanei_usb_open.
|
|
*
|
|
* @param dn device number
|
|
* @param ep_type type of endpoint to set (bitwise or of USB_DIR_IN/OUT and
|
|
* USB_ENDPOINT_TYPE_BULK/CONTROL/INTERRUPT/ISOCHRONOUS
|
|
* @param ep endpoint to use for the given type
|
|
*
|
|
*/
|
|
extern void sanei_usb_set_endpoint (SANE_Int dn, SANE_Int ep_type, SANE_Int ep);
|
|
|
|
/** Retrieve the endpoint used for the USB communication
|
|
*
|
|
* Returns the endpoint used for the USB communication of the given type.
|
|
* This function can only be called after sanei_usb_open.
|
|
*
|
|
* @param dn device number
|
|
* @param ep_type type of endpoint to retrieve (bitwise or of USB_DIR_IN/OUT
|
|
* and USB_ENDPOINT_TYPE_BULK/CONTROL/INTERRUPT/ISOCHRONOUS
|
|
* @return endpoint used for the given type
|
|
*
|
|
*/
|
|
extern SANE_Int sanei_usb_get_endpoint (SANE_Int dn, SANE_Int ep_type);
|
|
|
|
/** Close a USB device.
|
|
*
|
|
* @param dn device number
|
|
*/
|
|
extern void sanei_usb_close (SANE_Int dn);
|
|
|
|
/** Set the libusb timeout for bulk and interrupt reads.
|
|
*
|
|
* @param timeout the new timeout in ms
|
|
*/
|
|
extern void sanei_usb_set_timeout (SANE_Int timeout);
|
|
|
|
/** Check if sanei_usb_set_timeout() is available.
|
|
*/
|
|
#define HAVE_SANEI_USB_SET_TIMEOUT
|
|
|
|
/** Clear halt condition on bulk endpoints
|
|
*
|
|
* @param dn device number
|
|
*/
|
|
extern SANE_Status sanei_usb_clear_halt (SANE_Int dn);
|
|
|
|
/** Check if sanei_usb_clear_halt() is available.
|
|
*/
|
|
#define HAVE_SANEI_USB_CLEAR_HALT
|
|
|
|
/** Reset device
|
|
*
|
|
* @param dn device number
|
|
*/
|
|
extern SANE_Status sanei_usb_reset (SANE_Int dn);
|
|
|
|
/** Initiate a bulk transfer read.
|
|
*
|
|
* Read up to size bytes from the device to buffer. After the read, size
|
|
* contains the number of bytes actually read.
|
|
*
|
|
* @param dn device number
|
|
* @param buffer buffer to store read data in
|
|
* @param size size of the data
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
extern SANE_Status
|
|
sanei_usb_read_bulk (SANE_Int dn, SANE_Byte * buffer, size_t * size);
|
|
|
|
/** Initiate a bulk transfer write.
|
|
*
|
|
* Write up to size bytes from buffer to the device. After the write size
|
|
* contains the number of bytes actually written.
|
|
*
|
|
* @param dn device number
|
|
* @param buffer buffer to write to device
|
|
* @param size size of the data
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the write
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*/
|
|
extern SANE_Status
|
|
sanei_usb_write_bulk (SANE_Int dn, const SANE_Byte * buffer, size_t * size);
|
|
|
|
/** Send/receive a control message to/from a USB device.
|
|
*
|
|
* This function is only supported for libusb devices and kernel acces with
|
|
* Linux 2.4.13 and newer.
|
|
* For a detailed explanation of the parameters, have a look at the USB
|
|
* specification at the <a href="http://www.usb.org/developers/docs/">
|
|
* www.usb.org developers information page</a>.
|
|
*
|
|
* @param dn device number
|
|
* @param rtype specifies the characteristics of the request (e.g. data
|
|
* direction)
|
|
* @param req actual request
|
|
* @param value parameter specific to the request
|
|
* @param index parameter specific to the request (often used to select
|
|
* endpoint)
|
|
* @param len length of data to send/receive
|
|
* @param data buffer to send/receive data
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on success
|
|
* - SANE_STATUS_IO_ERROR - on error
|
|
* - SANE_STATUS_UNSUPPORTED - if the feature is not supported by the OS or
|
|
* SANE.
|
|
*/
|
|
extern SANE_Status
|
|
sanei_usb_control_msg (SANE_Int dn, SANE_Int rtype, SANE_Int req,
|
|
SANE_Int value, SANE_Int index, SANE_Int len,
|
|
SANE_Byte * data);
|
|
|
|
/** Initiate a interrupt transfer read.
|
|
*
|
|
* Read up to size bytes from the interrupt endpoint from the device to
|
|
* buffer. After the read, size contains the number of bytes actually read.
|
|
*
|
|
* @param dn device number
|
|
* @param buffer buffer to store read data in
|
|
* @param size size of the data
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_read_int (SANE_Int dn, SANE_Byte * buffer, size_t * size);
|
|
|
|
/** Expand device name patterns into a list of devices.
|
|
*
|
|
* Apart from a normal device name (such as /dev/usb/scanner0 or
|
|
* libusb:002:003), this function currently supports USB device
|
|
* specifications of the form:
|
|
*
|
|
* usb VENDOR PRODUCT
|
|
*
|
|
* VENDOR and PRODUCT are non-negative integer numbers in decimal or
|
|
* hexadecimal format. A similar function for SCSI devices can be found
|
|
* in include/sane/config.h.
|
|
*
|
|
* @param name device name pattern
|
|
* @param attach attach function
|
|
*
|
|
*/
|
|
extern void
|
|
sanei_usb_attach_matching_devices (const char *name,
|
|
SANE_Status (*attach) (const char *dev));
|
|
|
|
/** Initiate set configuration.
|
|
*
|
|
* Change set configuration
|
|
*
|
|
* @param dn device number
|
|
* @param configuration, configuration nummber
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_set_configuration (SANE_Int dn, SANE_Int configuration);
|
|
|
|
/** Initiate claim interface.
|
|
*
|
|
* Change claim interface
|
|
*
|
|
* @param dn device number
|
|
* @param interface_number interface number
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_claim_interface (SANE_Int dn, SANE_Int interface_number);
|
|
|
|
/** Initiate release interface.
|
|
*
|
|
* Change release interface
|
|
*
|
|
* @param dn device number
|
|
* @param interface_number interface number
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_release_interface (SANE_Int dn, SANE_Int interface_number);
|
|
|
|
/** Initiate a set altinterface.
|
|
*
|
|
* Change set alternate
|
|
*
|
|
* @param dn device number
|
|
* @param alternate, alternate nummber
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_EOF - if zero bytes have been read
|
|
* - SANE_STATUS_IO_ERROR - if an error occured during the read
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_set_altinterface (SANE_Int dn, SANE_Int alternate);
|
|
|
|
/** Get some information from the device descriptor
|
|
*
|
|
* Sometimes it's useful to know something about revisions and
|
|
* other stuff reported by the USB system
|
|
*
|
|
* @param dn device number
|
|
* @param desc where to put the information to
|
|
*
|
|
* @return
|
|
* - SANE_STATUS_GOOD - on succes
|
|
* - SANE_STATUS_UNSUPPORTED - if the feature is not supported by the OS or
|
|
* SANE.
|
|
* - SANE_STATUS_INVAL - on every other error
|
|
*
|
|
*/
|
|
|
|
extern SANE_Status
|
|
sanei_usb_get_descriptor( SANE_Int dn, struct sanei_usb_dev_descriptor *desc );
|
|
|
|
/*------------------------------------------------------*/
|
|
#endif /* sanei_usb_h */
|