mirror
/
sane-project-backends
kopia lustrzana https://gitlab.com/sane-project/backends
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-backends/backend/genesys/gl646.cpp

3005 wiersze
101 KiB
C++
Czysty Wina Historia

/* sane - Scanner Access Now Easy.
Copyright (C) 2003 Oliver Rauch
Copyright (C) 2003, 2004 Henning Meier-Geinitz <henning@meier-geinitz.de>
Copyright (C) 2004 Gerhard Jaeger <gerhard@gjaeger.de>
Copyright (C) 2004-2013 Stéphane Voltz <stef.dev@free.fr>
Copyright (C) 2005-2009 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
Copyright (C) 2007 Luke <iceyfor@gmail.com>
Copyright (C) 2011 Alexey Osipov <simba@lerlan.ru> for HP2400 description
and tuning
This file is part of the SANE package.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
As a special exception, the authors of SANE give permission for
additional uses of the libraries contained in this release of SANE.
The exception is that, if you link a SANE library with other files
to produce an executable, this does not by itself cause the
resulting executable to be covered by the GNU General Public
License. Your use of that executable is in no way restricted on
account of linking the SANE library code into it.
This exception does not, however, invalidate any other reasons why
the executable file might be covered by the GNU General Public
License.
If you submit changes to SANE to the maintainers to be included in
a subsequent release, you agree by submitting the changes that
those changes may be distributed with this exception intact.
If you write modifications of your own for SANE, it is your choice
whether to permit this exception to apply to your modifications.
If you do not wish that, delete this exception notice.
*/
#define DEBUG_DECLARE_ONLY
#include "gl646.h"
#include "gl646_registers.h"
#include "test_settings.h"
#include <vector>
namespace genesys {
namespace gl646 {
namespace {
constexpr unsigned CALIBRATION_LINES = 10;
} // namespace
static void write_control(Genesys_Device* dev, const Genesys_Sensor& sensor, int resolution);
static void gl646_set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
int dpi);
static void simple_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
const ScanSession& session, bool move,
std::vector<std::uint8_t>& data, const char* test_identifier);
/**
* Send the stop scan command
* */
static void end_scan_impl(Genesys_Device* dev, Genesys_Register_Set* reg, bool check_stop,
bool eject);
/**
* master motor settings table entry
*/
struct Motor_Master
{
MotorId motor_id;
unsigned dpi;
unsigned channels;
// settings
StepType steptype;
bool fastmod; // fast scanning
bool fastfed; // fast fed slope tables
SANE_Int mtrpwm;
MotorSlope slope1;
MotorSlope slope2;
SANE_Int fwdbwd; // forward/backward steps
};
/**
* master motor settings, for a given motor and dpi,
* it gives steps and speed information
*/
static Motor_Master motor_master[] = {
/* HP3670 motor settings */
{MotorId::HP3670, 50, 3, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(2329, 120, 229),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 75, 3, StepType::FULL, false, true, 1,
MotorSlope::create_from_steps(3429, 305, 200),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 100, 3, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(2905, 187, 143),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 150, 3, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(3429, 305, 73),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 300, 3, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(1055, 563, 11),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 600, 3, StepType::FULL, false, true, 0,
MotorSlope::create_from_steps(10687, 5126, 3),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670,1200, 3, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(15937, 6375, 3),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 50, 1, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(2329, 120, 229),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 75, 1, StepType::FULL, false, true, 1,
MotorSlope::create_from_steps(3429, 305, 200),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 100, 1, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(2905, 187, 143),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 150, 1, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(3429, 305, 73),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 300, 1, StepType::HALF, false, true, 1,
MotorSlope::create_from_steps(1055, 563, 11),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670, 600, 1, StepType::FULL, false, true, 0,
MotorSlope::create_from_steps(10687, 5126, 3),
MotorSlope::create_from_steps(3399, 337, 192), 192},
{MotorId::HP3670,1200, 1, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(15937, 6375, 3),
MotorSlope::create_from_steps(3399, 337, 192), 192},
/* HP2400/G2410 motor settings base motor dpi = 600 */
{MotorId::HP2400, 50, 3, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(8736, 601, 120),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 100, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(8736, 601, 120),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 150, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(15902, 902, 67),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 300, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(16703, 2188, 32),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 600, 3, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(18761, 18761, 3),
MotorSlope::create_from_steps(4905, 627, 192), 192},
{MotorId::HP2400,1200, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(43501, 43501, 3),
MotorSlope::create_from_steps(4905, 627, 192), 192},
{MotorId::HP2400, 50, 1, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(8736, 601, 120),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 100, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(8736, 601, 120),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 150, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(15902, 902, 67),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 300, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(16703, 2188, 32),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400, 600, 1, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(18761, 18761, 3),
MotorSlope::create_from_steps(4905, 337, 192), 192},
{MotorId::HP2400,1200, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(43501, 43501, 3),
MotorSlope::create_from_steps(4905, 337, 192), 192},
/* XP 200 motor settings */
{MotorId::XP200, 75, 3, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6000, 2136, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 100, 3, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6000, 2850, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 200, 3, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6999, 5700, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 250, 3, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6999, 6999, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 300, 3, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(13500, 13500, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 600, 3, StepType::HALF, true, true, 0,
MotorSlope::create_from_steps(31998, 31998, 4),
MotorSlope::create_from_steps(12000, 1200, 2), 1},
{MotorId::XP200, 75, 1, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6000, 2000, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 100, 1, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6000, 1300, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 200, 1, StepType::HALF, true, true, 0,
MotorSlope::create_from_steps(6000, 3666, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 300, 1, StepType::HALF, true, false, 0,
MotorSlope::create_from_steps(6500, 6500, 4),
MotorSlope::create_from_steps(12000, 1200, 8), 1},
{MotorId::XP200, 600, 1, StepType::HALF, true, true, 0,
MotorSlope::create_from_steps(24000, 24000, 4),
MotorSlope::create_from_steps(12000, 1200, 2), 1},
/* HP scanjet 2300c */
{MotorId::HP2300, 75, 3, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(8139, 560, 120),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 150, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(7903, 543, 67),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 300, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(2175, 1087, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 600, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(8700, 4350, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300,1200, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(17400, 8700, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 75, 1, StepType::FULL, false, true, 63,
MotorSlope::create_from_steps(8139, 560, 120),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 150, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(7903, 543, 67),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 300, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(2175, 1087, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 600, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(8700, 4350, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300,1200, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(17400, 8700, 3),
MotorSlope::create_from_steps(4905, 337, 120), 16},
/* non half ccd settings for 300 dpi
{MotorId::HP2300, 300, 3, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(5386, 2175, 44),
MotorSlope::create_from_steps(4905, 337, 120), 16},
{MotorId::HP2300, 300, 1, StepType::HALF, false, true, 63,
MotorSlope::create_from_steps(5386, 2175, 44),
MotorSlope::create_from_steps(4905, 337, 120), 16},
*/
/* MD5345/6471 motor settings */
/* vfinal=(exposure/(1200/dpi))/step_type */
{MotorId::MD_5345, 50, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 250, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 75, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 343, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 100, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 458, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 150, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 687, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 200, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 916, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 300, 3, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 1375, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 400, 3, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2000, 1833, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 500, 3, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2291, 2291, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 600, 3, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2750, 2750, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 1200, 3, StepType::QUARTER, false, true, 0,
MotorSlope::create_from_steps(2750, 2750, 16),
MotorSlope::create_from_steps(2000, 300, 255), 146},
{MotorId::MD_5345, 2400, 3, StepType::QUARTER, false, true, 0,
MotorSlope::create_from_steps(5500, 5500, 16),
MotorSlope::create_from_steps(2000, 300, 255), 146},
{MotorId::MD_5345, 50, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 250, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 75, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 343, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 100, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 458, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 150, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 687, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 200, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 916, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 300, 1, StepType::HALF, false, true, 2,
MotorSlope::create_from_steps(2500, 1375, 255),
MotorSlope::create_from_steps(2000, 300, 255), 64},
{MotorId::MD_5345, 400, 1, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2000, 1833, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 500, 1, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2291, 2291, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 600, 1, StepType::HALF, false, true, 0,
MotorSlope::create_from_steps(2750, 2750, 32),
MotorSlope::create_from_steps(2000, 300, 255), 32},
{MotorId::MD_5345, 1200, 1, StepType::QUARTER, false, true, 0,
MotorSlope::create_from_steps(2750, 2750, 16),
MotorSlope::create_from_steps(2000, 300, 255), 146},
{MotorId::MD_5345, 2400, 1, StepType::QUARTER, false, true, 0,
MotorSlope::create_from_steps(5500, 5500, 16),
MotorSlope::create_from_steps(2000, 300, 255), 146}, /* 5500 guessed */
};
/**
* reads value from gpio endpoint
*/
static void gl646_gpio_read(IUsbDevice& usb_dev, std::uint8_t* value)
{
DBG_HELPER(dbg);
usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_REGISTER, GPIO_READ, INDEX, 1, value);
}
/**
* writes the given value to gpio endpoint
*/
static void gl646_gpio_write(IUsbDevice& usb_dev, std::uint8_t value)
{
DBG_HELPER_ARGS(dbg, "(0x%02x)", value);
usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, GPIO_WRITE, INDEX, 1, &value);
}
/**
* writes the given value to gpio output enable endpoint
*/
static void gl646_gpio_output_enable(IUsbDevice& usb_dev, std::uint8_t value)
{
DBG_HELPER_ARGS(dbg, "(0x%02x)", value);
usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, GPIO_OUTPUT_ENABLE, INDEX, 1, &value);
}
/**
* stop scanner's motor
* @param dev scanner's device
*/
static void gl646_stop_motor(Genesys_Device* dev)
{
DBG_HELPER(dbg);
dev->interface->write_register(0x0f, 0x00);
}
/**
* Returns the cksel values used by the required scan mode.
* @param sensor id of the sensor
* @param required required resolution
* @param color true is color mode
* @return cksel value for mode
*/
static int get_cksel(SensorId sensor_id, int required, unsigned channels)
{
for (const auto& sensor : *s_sensors) {
// exit on perfect match
if (sensor.sensor_id == sensor_id && sensor.resolutions.matches(required) &&
sensor.matches_channel_count(channels))
{
unsigned cksel = sensor.ccd_pixels_per_system_pixel();
return cksel;
}
}
DBG(DBG_error, "%s: failed to find match for %d dpi\n", __func__, required);
/* fail safe fallback */
return 1;
}
void CommandSetGl646::init_regs_for_scan_session(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set* regs,
const ScanSession& session) const
{
DBG_HELPER(dbg);
session.assert_computed();
debug_dump(DBG_info, sensor);
std::uint32_t move = session.params.starty;
Motor_Master *motor = nullptr;
std::uint32_t z1, z2;
int feedl;
/* for the given resolution, search for master
* motor mode setting */
for (unsigned i = 0; i < sizeof (motor_master) / sizeof (Motor_Master); ++i) {
if (dev->model->motor_id == motor_master[i].motor_id &&
motor_master[i].dpi == session.params.yres &&
motor_master[i].channels == session.params.channels)
{
motor = &motor_master[i];
}
}
if (motor == nullptr) {
throw SaneException("unable to find settings for motor %d at %d dpi, color=%d",
static_cast<unsigned>(dev->model->motor_id),
session.params.yres, session.params.channels);
}
scanner_setup_sensor(*dev, sensor, *regs);
/* now generate slope tables : we are not using generate_slope_table3 yet */
auto slope_table1 = create_slope_table_for_speed(motor->slope1, motor->slope1.max_speed_w,
StepType::FULL, 1, 4,
get_slope_table_max_size(AsicType::GL646));
auto slope_table2 = create_slope_table_for_speed(motor->slope2, motor->slope2.max_speed_w,
StepType::FULL, 1, 4,
get_slope_table_max_size(AsicType::GL646));
/* R01 */
/* now setup other registers for final scan (ie with shading enabled) */
/* watch dog + shading + scan enable */
regs->find_reg(0x01).value |= REG_0x01_DOGENB | REG_0x01_SCAN;
if (dev->model->is_cis) {
regs->find_reg(0x01).value |= REG_0x01_CISSET;
} else {
regs->find_reg(0x01).value &= ~REG_0x01_CISSET;
}
// if device has no calibration, don't enable shading correction
if (has_flag(dev->model->flags, ModelFlag::DISABLE_SHADING_CALIBRATION) ||
has_flag(session.params.flags, ScanFlag::DISABLE_SHADING))
{
regs->find_reg(0x01).value &= ~REG_0x01_DVDSET;
} else {
regs->find_reg(0x01).value |= REG_0x01_DVDSET;
}
regs->find_reg(0x01).value &= ~REG_0x01_FASTMOD;
if (motor->fastmod) {
regs->find_reg(0x01).value |= REG_0x01_FASTMOD;
}
/* R02 */
/* allow moving when buffer full by default */
if (!dev->model->is_sheetfed) {
dev->reg.find_reg(0x02).value &= ~REG_0x02_ACDCDIS;
} else {
dev->reg.find_reg(0x02).value |= REG_0x02_ACDCDIS;
}
/* setup motor power and direction */
sanei_genesys_set_motor_power(*regs, true);
if (has_flag(session.params.flags, ScanFlag::REVERSE)) {
regs->find_reg(0x02).value |= REG_0x02_MTRREV;
} else {
regs->find_reg(0x02).value &= ~REG_0x02_MTRREV;
}
/* fastfed enabled (2 motor slope tables) */
if (motor->fastfed) {
regs->find_reg(0x02).value |= REG_0x02_FASTFED;
} else {
regs->find_reg(0x02).value &= ~REG_0x02_FASTFED;
}
/* step type */
regs->find_reg(0x02).value &= ~REG_0x02_STEPSEL;
switch (motor->steptype)
{
case StepType::FULL:
break;
case StepType::HALF:
regs->find_reg(0x02).value |= 1;
break;
case StepType::QUARTER:
regs->find_reg(0x02).value |= 2;
break;
default:
regs->find_reg(0x02).value |= 3;
break;
}
if (dev->model->is_sheetfed || !has_flag(session.params.flags, ScanFlag::AUTO_GO_HOME)) {
regs->find_reg(0x02).value &= ~REG_0x02_AGOHOME;
} else {
regs->find_reg(0x02).value |= REG_0x02_AGOHOME;
}
/* R03 */
regs->find_reg(0x03).value &= ~REG_0x03_AVEENB;
// regs->find_reg(0x03).value |= REG_0x03_AVEENB;
regs->find_reg(0x03).value &= ~REG_0x03_LAMPDOG;
/* select XPA */
regs->find_reg(0x03).value &= ~REG_0x03_XPASEL;
if ((session.params.flags & ScanFlag::USE_XPA) != ScanFlag::NONE) {
regs->find_reg(0x03).value |= REG_0x03_XPASEL;
}
regs->state.is_xpa_on = (session.params.flags & ScanFlag::USE_XPA) != ScanFlag::NONE;
/* R04 */
/* monochrome / color scan */
switch (session.params.depth) {
case 8:
regs->find_reg(0x04).value &= ~(REG_0x04_LINEART | REG_0x04_BITSET);
break;
case 16:
regs->find_reg(0x04).value &= ~REG_0x04_LINEART;
regs->find_reg(0x04).value |= REG_0x04_BITSET;
break;
}
sanei_genesys_set_dpihw(*regs, sensor.full_resolution);
/* gamma enable for scans */
if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
regs->find_reg(0x05).value |= REG_0x05_GMM14BIT;
}
if (!has_flag(session.params.flags, ScanFlag::DISABLE_GAMMA) &&
session.params.depth < 16)
{
regs->find_reg(REG_0x05).value |= REG_0x05_GMMENB;
} else {
regs->find_reg(REG_0x05).value &= ~REG_0x05_GMMENB;
}
/* true CIS gray if needed */
if (dev->model->is_cis && session.params.channels == 1 && dev->settings.true_gray) {
regs->find_reg(0x05).value |= REG_0x05_LEDADD;
} else {
regs->find_reg(0x05).value &= ~REG_0x05_LEDADD;
}
/* HP2400 1200dpi mode tuning */
if (dev->model->sensor_id == SensorId::CCD_HP2400) {
/* reset count of dummy lines to zero */
regs->find_reg(0x1e).value &= ~REG_0x1E_LINESEL;
if (session.params.xres >= 1200) {
/* there must be one dummy line */
regs->find_reg(0x1e).value |= 1 & REG_0x1E_LINESEL;
/* GPO12 need to be set to zero */
regs->find_reg(0x66).value &= ~0x20;
}
else
{
/* set GPO12 back to one */
regs->find_reg(0x66).value |= 0x20;
}
}
/* motor steps used */
unsigned forward_steps = motor->fwdbwd;
unsigned backward_steps = motor->fwdbwd;
// the steps count must be different by at most 128, otherwise it's impossible to construct
// a proper backtracking curve. We're using slightly lower limit to allow at least a minimum
// distance between accelerations (forward_steps, backward_steps)
if (slope_table1.table.size() > slope_table2.table.size() + 100) {
slope_table2.expand_table(slope_table1.table.size() - 100, 1);
}
if (slope_table2.table.size() > slope_table1.table.size() + 100) {
slope_table1.expand_table(slope_table2.table.size() - 100, 1);
}
if (slope_table1.table.size() >= slope_table2.table.size()) {
backward_steps += (slope_table1.table.size() - slope_table2.table.size()) * 2;
} else {
forward_steps += (slope_table2.table.size() - slope_table1.table.size()) * 2;
}
if (forward_steps > 255) {
if (backward_steps < (forward_steps - 255)) {
throw SaneException("Can't set backtracking parameters without skipping image");
}
backward_steps -= forward_steps - 255;
}
if (backward_steps > 255) {
if (forward_steps < (backward_steps - 255)) {
throw SaneException("Can't set backtracking parameters without skipping image");
}
forward_steps -= backward_steps - 255;
}
regs->find_reg(0x21).value = slope_table1.table.size();
regs->find_reg(0x24).value = slope_table2.table.size();
regs->find_reg(0x22).value = forward_steps;
regs->find_reg(0x23).value = backward_steps;
/* CIS scanners read one line per color channel
* since gray mode use 'add' we also read 3 channels even not in
* color mode */
if (dev->model->is_cis) {
regs->set24(REG_LINCNT, session.output_line_count * 3);
} else {
regs->set24(REG_LINCNT, session.output_line_count);
}
regs->set16(REG_STRPIXEL, session.pixel_startx);
regs->set16(REG_ENDPIXEL, session.pixel_endx);
regs->set24(REG_MAXWD, session.output_line_bytes);
// FIXME: the incoming sensor is selected for incorrect resolution
const auto& dpiset_sensor = sanei_genesys_find_sensor(dev, session.params.xres,
session.params.channels,
session.params.scan_method);
regs->set16(REG_DPISET, dpiset_sensor.register_dpiset);
regs->set16(REG_LPERIOD, sensor.exposure_lperiod);
/* move distance must be adjusted to take into account the extra lines
* read to reorder data */
feedl = move;
if (session.num_staggered_lines + session.max_color_shift_lines > 0 && feedl != 0) {
unsigned total_lines = session.max_color_shift_lines + session.num_staggered_lines;
int feed_offset = (total_lines * dev->motor.base_ydpi) / motor->dpi;
if (feedl > feed_offset) {
feedl = feedl - feed_offset;
}
}
/* we assume all scans are done with 2 tables */
/*
feedl = feed_steps - fast_slope_steps*2 -
(slow_slope_steps >> scan_step_type); */
/* but head has moved due to shading calibration => dev->scanhead_position_primary */
if (feedl > 0)
{
/* TODO clean up this when I'll fully understand.
* for now, special casing each motor */
switch (dev->model->motor_id) {
case MotorId::MD_5345:
switch (motor->dpi) {
case 200:
feedl -= 70;
break;
case 300:
feedl -= 70;
break;
case 400:
feedl += 130;
break;
case 600:
feedl += 160;
break;
case 1200:
feedl += 160;
break;
case 2400:
feedl += 180;
break;
default:
break;
}
break;
case MotorId::HP2300:
switch (motor->dpi) {
case 75:
feedl -= 180;
break;
case 150:
feedl += 0;
break;
case 300:
feedl += 30;
break;
case 600:
feedl += 35;
break;
case 1200:
feedl += 45;
break;
default:
break;
}
break;
case MotorId::HP2400:
switch (motor->dpi) {
case 150:
feedl += 150;
break;
case 300:
feedl += 220;
break;
case 600:
feedl += 260;
break;
case 1200:
feedl += 280; /* 300 */
break;
case 50:
feedl += 0;
break;
case 100:
feedl += 100;
break;
default:
break;
}
break;
/* theorical value */
default: {
unsigned step_shift = static_cast<unsigned>(motor->steptype);
if (motor->fastfed)
{
feedl = feedl - 2 * slope_table2.table.size() -
(slope_table1.table.size() >> step_shift);
}
else
{
feedl = feedl - (slope_table1.table.size() >> step_shift);
}
break;
}
}
/* security */
if (feedl < 0)
feedl = 0;
}
regs->set24(REG_FEEDL, feedl);
regs->find_reg(0x65).value = motor->mtrpwm;
sanei_genesys_calculate_zmod(regs->find_reg(0x02).value & REG_0x02_FASTFED,
sensor.exposure_lperiod,
slope_table1.table,
slope_table1.table.size(),
move, motor->fwdbwd, &z1, &z2);
/* no z1/z2 for sheetfed scanners */
if (dev->model->is_sheetfed) {
z1 = 0;
z2 = 0;
}
regs->set16(REG_Z1MOD, z1);
regs->set16(REG_Z2MOD, z2);
regs->find_reg(0x6b).value = slope_table2.table.size();
regs->find_reg(0x6c).value =
(regs->find_reg(0x6c).value & REG_0x6C_TGTIME) | ((z1 >> 13) & 0x38) | ((z2 >> 16)
& 0x07);
write_control(dev, sensor, session.output_resolution);
// setup analog frontend
gl646_set_fe(dev, sensor, AFE_SET, session.output_resolution);
setup_image_pipeline(*dev, session);
dev->read_active = true;
dev->session = session;
dev->total_bytes_read = 0;
dev->total_bytes_to_read = session.output_line_bytes_requested * session.params.lines;
/* select color filter based on settings */
regs->find_reg(0x04).value &= ~REG_0x04_FILTER;
if (session.params.channels == 1) {
switch (session.params.color_filter) {
case ColorFilter::RED:
regs->find_reg(0x04).value |= 0x04;
break;
case ColorFilter::GREEN:
regs->find_reg(0x04).value |= 0x08;
break;
case ColorFilter::BLUE:
regs->find_reg(0x04).value |= 0x0c;
break;
default:
break;
}
}
scanner_send_slope_table(dev, sensor, 0, slope_table1.table);
scanner_send_slope_table(dev, sensor, 1, slope_table2.table);
}
/**
* Set all registers to default values after init
* @param dev scannerr's device to set
*/
static void
gl646_init_regs (Genesys_Device * dev)
{
int addr;
DBG(DBG_proc, "%s\n", __func__);
dev->reg.clear();
for (addr = 1; addr <= 0x0b; addr++)
dev->reg.init_reg(addr, 0);
for (addr = 0x10; addr <= 0x29; addr++)
dev->reg.init_reg(addr, 0);
for (addr = 0x2c; addr <= 0x39; addr++)
dev->reg.init_reg(addr, 0);
for (addr = 0x3d; addr <= 0x3f; addr++)
dev->reg.init_reg(addr, 0);
for (addr = 0x52; addr <= 0x5e; addr++)
dev->reg.init_reg(addr, 0);
for (addr = 0x60; addr <= 0x6d; addr++)
dev->reg.init_reg(addr, 0);
dev->reg.find_reg(0x01).value = 0x20 /*0x22 */ ; /* enable shading, CCD, color, 1M */
dev->reg.find_reg(0x02).value = 0x30 /*0x38 */ ; /* auto home, one-table-move, full step */
if (dev->model->motor_id == MotorId::MD_5345) {
dev->reg.find_reg(0x02).value |= 0x01; // half-step
}
switch (dev->model->motor_id) {
case MotorId::MD_5345:
dev->reg.find_reg(0x02).value |= 0x01; /* half-step */
break;
case MotorId::XP200:
/* for this sheetfed scanner, no AGOHOME, nor backtracking */
dev->reg.find_reg(0x02).value = 0x50;
break;
default:
break;
}
dev->reg.find_reg(0x03).value = 0x1f /*0x17 */ ; /* lamp on */
dev->reg.find_reg(0x04).value = 0x13 /*0x03 */ ; /* 8 bits data, 16 bits A/D, color, Wolfson fe *//* todo: according to spec, 0x0 is reserved? */
switch (dev->model->adc_id)
{
case AdcId::AD_XP200:
dev->reg.find_reg(0x04).value = 0x12;
break;
default:
/* Wolfson frontend */
dev->reg.find_reg(0x04).value = 0x13;
break;
}
const auto& sensor = sanei_genesys_find_sensor_any(dev);
dev->reg.find_reg(0x05).value = 0x00; /* 12 bits gamma, disable gamma, 24 clocks/pixel */
sanei_genesys_set_dpihw(dev->reg, sensor.full_resolution);
if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
dev->reg.find_reg(0x05).value |= REG_0x05_GMM14BIT;
}
if (dev->model->adc_id == AdcId::AD_XP200) {
dev->reg.find_reg(0x05).value |= 0x01; /* 12 clocks/pixel */
}
if (dev->model->sensor_id == SensorId::CCD_HP2300) {
dev->reg.find_reg(0x06).value = 0x00; // PWRBIT off, shading gain=4, normal AFE image capture
} else {
dev->reg.find_reg(0x06).value = 0x18; // PWRBIT on, shading gain=8, normal AFE image capture
}
scanner_setup_sensor(*dev, sensor, dev->reg);
dev->reg.find_reg(0x1e).value = 0xf0; /* watch-dog time */
switch (dev->model->sensor_id)
{
case SensorId::CCD_HP2300:
dev->reg.find_reg(0x1e).value = 0xf0;
dev->reg.find_reg(0x1f).value = 0x10;
dev->reg.find_reg(0x20).value = 0x20;
break;
case SensorId::CCD_HP2400:
dev->reg.find_reg(0x1e).value = 0x80;
dev->reg.find_reg(0x1f).value = 0x10;
dev->reg.find_reg(0x20).value = 0x20;
break;
case SensorId::CCD_HP3670:
dev->reg.find_reg(0x19).value = 0x2a;
dev->reg.find_reg(0x1e).value = 0x80;
dev->reg.find_reg(0x1f).value = 0x10;
dev->reg.find_reg(0x20).value = 0x20;
break;
case SensorId::CIS_XP200:
dev->reg.find_reg(0x1e).value = 0x10;
dev->reg.find_reg(0x1f).value = 0x01;
dev->reg.find_reg(0x20).value = 0x50;
break;
default:
dev->reg.find_reg(0x1f).value = 0x01;
dev->reg.find_reg(0x20).value = 0x50;
break;
}
dev->reg.find_reg(0x21).value = 0x08 /*0x20 */ ; /* table one steps number for forward slope curve of the acc/dec */
dev->reg.find_reg(0x22).value = 0x10 /*0x08 */ ; /* steps number of the forward steps for start/stop */
dev->reg.find_reg(0x23).value = 0x10 /*0x08 */ ; /* steps number of the backward steps for start/stop */
dev->reg.find_reg(0x24).value = 0x08 /*0x20 */ ; /* table one steps number backward slope curve of the acc/dec */
dev->reg.find_reg(0x25).value = 0x00; /* scan line numbers (7000) */
dev->reg.find_reg(0x26).value = 0x00 /*0x1b */ ;
dev->reg.find_reg(0x27).value = 0xd4 /*0x58 */ ;
dev->reg.find_reg(0x28).value = 0x01; /* PWM duty for lamp control */
dev->reg.find_reg(0x29).value = 0xff;
dev->reg.find_reg(0x2c).value = 0x02; /* set resolution (600 DPI) */
dev->reg.find_reg(0x2d).value = 0x58;
dev->reg.find_reg(0x2e).value = 0x78; /* set black&white threshold high level */
dev->reg.find_reg(0x2f).value = 0x7f; /* set black&white threshold low level */
dev->reg.find_reg(0x30).value = 0x00; /* begin pixel position (16) */
dev->reg.find_reg(0x31).value = sensor.dummy_pixel /*0x10 */ ; /* TGW + 2*TG_SHLD + x */
dev->reg.find_reg(0x32).value = 0x2a /*0x15 */ ; /* end pixel position (5390) */
dev->reg.find_reg(0x33).value = 0xf8 /*0x0e */ ; /* TGW + 2*TG_SHLD + y */
dev->reg.find_reg(0x34).value = sensor.dummy_pixel;
dev->reg.find_reg(0x35).value = 0x01 /*0x00 */ ; /* set maximum word size per line, for buffer full control (10800) */
dev->reg.find_reg(0x36).value = 0x00 /*0x2a */ ;
dev->reg.find_reg(0x37).value = 0x00 /*0x30 */ ;
dev->reg.find_reg(0x38).value = 0x2a; // line period (exposure time = 11000 pixels) */
dev->reg.find_reg(0x39).value = 0xf8;
dev->reg.find_reg(0x3d).value = 0x00; /* set feed steps number of motor move */
dev->reg.find_reg(0x3e).value = 0x00;
dev->reg.find_reg(0x3f).value = 0x01 /*0x00 */ ;
dev->reg.find_reg(0x60).value = 0x00; /* Z1MOD, 60h:61h:(6D b5:b3), remainder for start/stop */
dev->reg.find_reg(0x61).value = 0x00; /* (21h+22h)/LPeriod */
dev->reg.find_reg(0x62).value = 0x00; /* Z2MODE, 62h:63h:(6D b2:b0), remainder for start scan */
dev->reg.find_reg(0x63).value = 0x00; /* (3Dh+3Eh+3Fh)/LPeriod for one-table mode,(21h+1Fh)/LPeriod */
dev->reg.find_reg(0x64).value = 0x00; /* motor PWM frequency */
dev->reg.find_reg(0x65).value = 0x00; /* PWM duty cycle for table one motor phase (63 = max) */
if (dev->model->motor_id == MotorId::MD_5345) {
// PWM duty cycle for table one motor phase (63 = max)
dev->reg.find_reg(0x65).value = 0x02;
}
for (const auto& reg : dev->gpo.regs) {
dev->reg.set8(reg.address, reg.value);
}
switch (dev->model->motor_id) {
case MotorId::HP2300:
case MotorId::HP2400:
dev->reg.find_reg(0x6a).value = 0x7f; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6b).value = 0x78; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6d).value = 0x7f;
break;
case MotorId::MD_5345:
dev->reg.find_reg(0x6a).value = 0x42; /* table two fast moving step type, PWM duty for table two */
dev->reg.find_reg(0x6b).value = 0xff; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6d).value = 0x41; /* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
break;
case MotorId::XP200:
dev->reg.find_reg(0x6a).value = 0x7f; /* table two fast moving step type, PWM duty for table two */
dev->reg.find_reg(0x6b).value = 0x08; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6d).value = 0x01; /* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
break;
case MotorId::HP3670:
dev->reg.find_reg(0x6a).value = 0x41; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6b).value = 0xc8; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6d).value = 0x7f;
break;
default:
dev->reg.find_reg(0x6a).value = 0x40; /* table two fast moving step type, PWM duty for table two */
dev->reg.find_reg(0x6b).value = 0xff; /* table two steps number for acc/dec */
dev->reg.find_reg(0x6d).value = 0x01; /* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
break;
}
dev->reg.find_reg(0x6c).value = 0x00; /* period times for LPeriod, expR,expG,expB, Z1MODE, Z2MODE (one period time) */
}
// Set values of Analog Device type frontend
static void gl646_set_ad_fe(Genesys_Device* dev, std::uint8_t set)
{
DBG_HELPER(dbg);
int i;
if (set == AFE_INIT) {
dev->frontend = dev->frontend_initial;
// write them to analog frontend
dev->interface->write_fe_register(0x00, dev->frontend.regs.get_value(0x00));
dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
}
if (set == AFE_SET)
{
for (i = 0; i < 3; i++) {
dev->interface->write_fe_register(0x02 + i, dev->frontend.get_gain(i));
}
for (i = 0; i < 3; i++) {
dev->interface->write_fe_register(0x05 + i, dev->frontend.get_offset(i));
}
}
/*
if (set == AFE_POWER_SAVE)
{
dev->interface->write_fe_register(0x00, dev->frontend.reg[0] | 0x04);
} */
}
/** set up analog frontend
* set up analog frontend
* @param dev device to set up
* @param set action from AFE_SET, AFE_INIT and AFE_POWERSAVE
* @param dpi resolution of the scan since it affects settings
*/
static void gl646_wm_hp3670(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
unsigned dpi)
{
DBG_HELPER(dbg);
int i;
switch (set)
{
case AFE_INIT:
dev->interface->write_fe_register(0x04, 0x80);
dev->interface->sleep_ms(200);
dev->interface->write_register(0x50, 0x00);
dev->frontend = dev->frontend_initial;
dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
dev->interface->write_fe_register(0x02, dev->frontend.regs.get_value(0x02));
gl646_gpio_output_enable(dev->interface->get_usb_device(), 0x07);
break;
case AFE_POWER_SAVE:
dev->interface->write_fe_register(0x01, 0x06);
dev->interface->write_fe_register(0x06, 0x0f);
return;
break;
default: /* AFE_SET */
/* mode setup */
i = dev->frontend.regs.get_value(0x03);
if (dpi > sensor.full_resolution / 2) {
/* fe_reg_0x03 must be 0x12 for 1200 dpi in WOLFSON_HP3670.
* WOLFSON_HP2400 in 1200 dpi mode works well with
* fe_reg_0x03 set to 0x32 or 0x12 but not to 0x02 */
i = 0x12;
}
dev->interface->write_fe_register(0x03, i);
/* offset and sign (or msb/lsb ?) */
for (i = 0; i < 3; i++) {
dev->interface->write_fe_register(0x20 + i, dev->frontend.get_offset(i));
dev->interface->write_fe_register(0x24 + i, dev->frontend.regs.get_value(0x24 + i));
}
// gain
for (i = 0; i < 3; i++) {
dev->interface->write_fe_register(0x28 + i, dev->frontend.get_gain(i));
}
}
}
/** Set values of analog frontend
* @param dev device to set
* @param set action to execute
* @param dpi dpi to setup the AFE
*/
static void gl646_set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
int dpi)
{
DBG_HELPER_ARGS(dbg, "%s,%d", set == AFE_INIT ? "init" :
set == AFE_SET ? "set" :
set == AFE_POWER_SAVE ? "powersave" : "huh?", dpi);
int i;
std::uint8_t val;
/* Analog Device type frontend */
std::uint8_t frontend_type = dev->reg.find_reg(0x04).value & REG_0x04_FESET;
if (frontend_type == 0x02) {
gl646_set_ad_fe(dev, set);
return;
}
/* Wolfson type frontend */
if (frontend_type != 0x03) {
throw SaneException("unsupported frontend type %d", frontend_type);
}
/* per frontend function to keep code clean */
switch (dev->model->adc_id)
{
case AdcId::WOLFSON_HP3670:
case AdcId::WOLFSON_HP2400:
gl646_wm_hp3670(dev, sensor, set, dpi);
return;
default:
DBG(DBG_proc, "%s(): using old method\n", __func__);
break;
}
/* initialize analog frontend */
if (set == AFE_INIT) {
dev->frontend = dev->frontend_initial;
// reset only done on init
dev->interface->write_fe_register(0x04, 0x80);
/* enable GPIO for some models */
if (dev->model->sensor_id == SensorId::CCD_HP2300) {
val = 0x07;
gl646_gpio_output_enable(dev->interface->get_usb_device(), val);
}
return;
}
// set fontend to power saving mode
if (set == AFE_POWER_SAVE) {
dev->interface->write_fe_register(0x01, 0x02);
return;
}
/* here starts AFE_SET */
/* TODO : base this test on cfg reg3 or a CCD family flag to be created */
/* if (dev->model->ccd_type != SensorId::CCD_HP2300
&& dev->model->ccd_type != SensorId::CCD_HP3670
&& dev->model->ccd_type != SensorId::CCD_HP2400) */
{
dev->interface->write_fe_register(0x00, dev->frontend.regs.get_value(0x00));
dev->interface->write_fe_register(0x02, dev->frontend.regs.get_value(0x02));
}
// start with reg3
dev->interface->write_fe_register(0x03, dev->frontend.regs.get_value(0x03));
switch (dev->model->sensor_id)
{
default:
for (i = 0; i < 3; i++) {
dev->interface->write_fe_register(0x24 + i, dev->frontend.regs.get_value(0x24 + i));
dev->interface->write_fe_register(0x28 + i, dev->frontend.get_gain(i));
dev->interface->write_fe_register(0x20 + i, dev->frontend.get_offset(i));
}
break;
/* just can't have it to work ....
case SensorId::CCD_HP2300:
case SensorId::CCD_HP2400:
case SensorId::CCD_HP3670:
dev->interface->write_fe_register(0x23, dev->frontend.get_offset(1));
dev->interface->write_fe_register(0x28, dev->frontend.get_gain(1));
break; */
}
// end with reg1
dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
}
/** Set values of analog frontend
* this this the public interface, the gl646 as to use one more
* parameter to work effectively, hence the redirection
* @param dev device to set
* @param set action to execute
*/
void CommandSetGl646::set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor,
std::uint8_t set) const
{
gl646_set_fe(dev, sensor, set, dev->settings.yres);
}
/**
* enters or leaves power saving mode
* limited to AFE for now.
* @param dev scanner's device
* @param enable true to enable power saving, false to leave it
*/
void CommandSetGl646::save_power(Genesys_Device* dev, bool enable) const
{
DBG_HELPER_ARGS(dbg, "enable = %d", enable);
const auto& sensor = sanei_genesys_find_sensor_any(dev);
if (enable)
{
// gl646_set_fe(dev, sensor, AFE_POWER_SAVE);
}
else
{
gl646_set_fe(dev, sensor, AFE_INIT, 0);
}
}
void CommandSetGl646::set_powersaving(Genesys_Device* dev, int delay /* in minutes */) const
{
DBG_HELPER_ARGS(dbg, "delay = %d", delay);
Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL);
int rate, exposure_time, tgtime, time;
local_reg.init_reg(0x01, dev->reg.get8(0x01)); // disable fastmode
local_reg.init_reg(0x03, dev->reg.get8(0x03)); // Lamp power control
local_reg.init_reg(0x05, dev->reg.get8(0x05) & ~REG_0x05_BASESEL); // 24 clocks/pixel
local_reg.init_reg(0x38, 0x00); // line period low
local_reg.init_reg(0x39, 0x00); //line period high
local_reg.init_reg(0x6c, 0x00); // period times for LPeriod, expR,expG,expB, Z1MODE, Z2MODE
if (!delay)
local_reg.find_reg(0x03).value &= 0xf0; /* disable lampdog and set lamptime = 0 */
else if (delay < 20)
local_reg.find_reg(0x03).value = (local_reg.get8(0x03) & 0xf0) | 0x09; /* enable lampdog and set lamptime = 1 */
else
local_reg.find_reg(0x03).value = (local_reg.get8(0x03) & 0xf0) | 0x0f; /* enable lampdog and set lamptime = 7 */
time = delay * 1000 * 60; /* -> msec */
exposure_time = static_cast<std::uint32_t>((time * 32000.0 /
(24.0 * 64.0 * (local_reg.get8(0x03) & REG_0x03_LAMPTIM) *
1024.0) + 0.5));
/* 32000 = system clock, 24 = clocks per pixel */
rate = (exposure_time + 65536) / 65536;
if (rate > 4)
{
rate = 8;
tgtime = 3;
}
else if (rate > 2)
{
rate = 4;
tgtime = 2;
}
else if (rate > 1)
{
rate = 2;
tgtime = 1;
}
else
{
rate = 1;
tgtime = 0;
}
local_reg.find_reg(0x6c).value |= tgtime << 6;
exposure_time /= rate;
if (exposure_time > 65535)
exposure_time = 65535;
local_reg.find_reg(0x38).value = exposure_time / 256;
local_reg.find_reg(0x39).value = exposure_time & 255;
dev->interface->write_registers(local_reg);
}
/**
* loads document into scanner
* currently only used by XP200
* bit2 (0x04) of gpio is paper event (document in/out) on XP200
* HOMESNR is set if no document in front of sensor, the sequence of events is
* paper event -> document is in the sheet feeder
* HOMESNR becomes 0 -> document reach sensor
* HOMESNR becomes 1 ->document left sensor
* paper event -> document is out
*/
void CommandSetGl646::load_document(Genesys_Device* dev) const
{
DBG_HELPER(dbg);
// FIXME: sequential not really needed in this case
Genesys_Register_Set regs(Genesys_Register_Set::SEQUENTIAL);
unsigned count;
/* no need to load document is flatbed scanner */
if (!dev->model->is_sheetfed) {
DBG(DBG_proc, "%s: nothing to load\n", __func__);
DBG(DBG_proc, "%s: end\n", __func__);
return;
}
auto status = scanner_read_status(*dev);
// home sensor is set if a document is inserted
if (status.is_at_home) {
/* if no document, waits for a paper event to start loading */
/* with a 60 seconde minutes timeout */
count = 0;
std::uint8_t val = 0;
do {
gl646_gpio_read(dev->interface->get_usb_device(), &val);
DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, val);
if ((val & 0x04) != 0x04)
{
DBG(DBG_warn, "%s: no paper detected\n", __func__);
}
dev->interface->sleep_ms(200);
count++;
}
while (((val & 0x04) != 0x04) && (count < 300)); /* 1 min time out */
if (count == 300)
{
throw SaneException(SANE_STATUS_NO_DOCS, "timeout waiting for document");
}
}
/* set up to fast move before scan then move until document is detected */
regs.init_reg(0x01, 0x90);
/* AGOME, 2 slopes motor moving */
regs.init_reg(0x02, 0x79);
/* motor feeding steps to 0 */
regs.init_reg(0x3d, 0);
regs.init_reg(0x3e, 0);
regs.init_reg(0x3f, 0);
/* 50 fast moving steps */
regs.init_reg(0x6b, 50);
/* set GPO */
regs.init_reg(0x66, 0x30);
/* stesp NO */
regs.init_reg(0x21, 4);
regs.init_reg(0x22, 1);
regs.init_reg(0x23, 1);
regs.init_reg(0x24, 4);
/* generate slope table 2 */
auto slope_table = create_slope_table_for_speed(MotorSlope::create_from_steps(6000, 2400, 50),
2400, StepType::FULL, 1, 4,
get_slope_table_max_size(AsicType::GL646));
// document loading:
// send regs
// start motor
// wait e1 status to become e0
const auto& sensor = sanei_genesys_find_sensor_any(dev);
scanner_send_slope_table(dev, sensor, 1, slope_table.table);
dev->interface->write_registers(regs);
scanner_start_action(*dev, true);
count = 0;
do
{
status = scanner_read_status(*dev);
dev->interface->sleep_ms(200);
count++;
} while (status.is_motor_enabled && (count < 300));
if (count == 300)
{
throw SaneException(SANE_STATUS_JAMMED, "can't load document");
}
/* when loading OK, document is here */
dev->document = true;
/* set up to idle */
regs.set8(0x02, 0x71);
regs.set8(0x3f, 1);
regs.set8(0x6b, 8);
dev->interface->write_registers(regs);
}
/**
* detects end of document and adjust current scan
* to take it into account
* used by sheetfed scanners
*/
void CommandSetGl646::detect_document_end(Genesys_Device* dev) const
{
DBG_HELPER(dbg);
std::uint8_t gpio;
unsigned int bytes_left;
// test for document presence
scanner_read_print_status(*dev);
gl646_gpio_read(dev->interface->get_usb_device(), &gpio);
DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);
/* detect document event. There one event when the document go in,
* then another when it leaves */
if (dev->document && (gpio & 0x04) && (dev->total_bytes_read > 0)) {
DBG(DBG_info, "%s: no more document\n", __func__);
dev->document = false;
/* adjust number of bytes to read:
* total_bytes_to_read is the number of byte to send to frontend
* total_bytes_read is the number of bytes sent to frontend
* read_bytes_left is the number of bytes to read from the scanner
*/
DBG(DBG_io, "%s: total_bytes_to_read=%zu\n", __func__, dev->total_bytes_to_read);
DBG(DBG_io, "%s: total_bytes_read =%zu\n", __func__, dev->total_bytes_read);
// amount of data available from scanner is what to scan
sanei_genesys_read_valid_words(dev, &bytes_left);
unsigned lines_in_buffer = bytes_left / dev->session.output_line_bytes_raw;
// we add the number of lines needed to read the last part of the document in
unsigned lines_offset = static_cast<unsigned>(
(dev->model->y_offset * dev->session.params.yres) / MM_PER_INCH);
unsigned remaining_lines = lines_in_buffer + lines_offset;
bytes_left = remaining_lines * dev->session.output_line_bytes_raw;
if (bytes_left < dev->get_pipeline_source().remaining_bytes()) {
dev->get_pipeline_source().set_remaining_bytes(bytes_left);
dev->total_bytes_to_read = dev->total_bytes_read + bytes_left;
}
DBG(DBG_io, "%s: total_bytes_to_read=%zu\n", __func__, dev->total_bytes_to_read);
DBG(DBG_io, "%s: total_bytes_read =%zu\n", __func__, dev->total_bytes_read);
}
}
/**
* eject document from the feeder
* currently only used by XP200
* TODO we currently rely on AGOHOME not being set for sheetfed scanners,
* maybe check this flag in eject to let the document being eject automatically
*/
void CommandSetGl646::eject_document(Genesys_Device* dev) const
{
DBG_HELPER(dbg);
// FIXME: SEQUENTIAL not really needed in this case
Genesys_Register_Set regs((Genesys_Register_Set::SEQUENTIAL));
unsigned count;
std::uint8_t gpio;
/* at the end there will be no more document */
dev->document = false;
// first check for document event
gl646_gpio_read(dev->interface->get_usb_device(), &gpio);
DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);
// test status : paper event + HOMESNR -> no more doc ?
auto status = scanner_read_status(*dev);
// home sensor is set when document is inserted
if (status.is_at_home) {
dev->document = false;
DBG(DBG_info, "%s: no more document to eject\n", __func__);
return;
}
// there is a document inserted, eject it
dev->interface->write_register(0x01, 0xb0);
/* wait for motor to stop */
do {
dev->interface->sleep_ms(200);
status = scanner_read_status(*dev);
}
while (status.is_motor_enabled);
/* set up to fast move before scan then move until document is detected */
regs.init_reg(0x01, 0xb0);
/* AGOME, 2 slopes motor moving , eject 'backward' */
regs.init_reg(0x02, 0x5d);
/* motor feeding steps to 119880 */
regs.init_reg(0x3d, 1);
regs.init_reg(0x3e, 0xd4);
regs.init_reg(0x3f, 0x48);
/* 60 fast moving steps */
regs.init_reg(0x6b, 60);
/* set GPO */
regs.init_reg(0x66, 0x30);
/* stesp NO */
regs.init_reg(0x21, 4);
regs.init_reg(0x22, 1);
regs.init_reg(0x23, 1);
regs.init_reg(0x24, 4);
/* generate slope table 2 */
auto slope_table = create_slope_table_for_speed(MotorSlope::create_from_steps(10000, 1600, 60),
1600, StepType::FULL, 1, 4,
get_slope_table_max_size(AsicType::GL646));
// document eject:
// send regs
// start motor
// wait c1 status to become c8 : HOMESNR and ~MOTFLAG
// FIXME: sensor is not used.
const auto& sensor = sanei_genesys_find_sensor_any(dev);
scanner_send_slope_table(dev, sensor, 1, slope_table.table);
dev->interface->write_registers(regs);
scanner_start_action(*dev, true);
/* loop until paper sensor tells paper is out, and till motor is running */
/* use a 30 timeout */
count = 0;
do {
status = scanner_read_status(*dev);
dev->interface->sleep_ms(200);
count++;
} while (!status.is_at_home && (count < 150));
// read GPIO on exit
gl646_gpio_read(dev->interface->get_usb_device(), &gpio);
DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);
}
// Send the low-level scan command
void CommandSetGl646::begin_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set* reg, bool start_motor) const
{
DBG_HELPER(dbg);
(void) sensor;
// FIXME: SEQUENTIAL not really needed in this case
Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL);
local_reg.init_reg(0x03, reg->get8(0x03));
local_reg.init_reg(0x01, reg->get8(0x01) | REG_0x01_SCAN);
if (start_motor) {
local_reg.init_reg(0x0f, 0x01);
} else {
local_reg.init_reg(0x0f, 0x00); // do not start motor yet
}
dev->interface->write_registers(local_reg);
dev->advance_head_pos_by_session(ScanHeadId::PRIMARY);
}
// Send the stop scan command
static void end_scan_impl(Genesys_Device* dev, Genesys_Register_Set* reg, bool check_stop,
bool eject)
{
DBG_HELPER_ARGS(dbg, "check_stop = %d, eject = %d", check_stop, eject);
scanner_stop_action_no_move(*dev, *reg);
unsigned wait_limit_seconds = 30;
/* for sheetfed scanners, we may have to eject document */
if (dev->model->is_sheetfed) {
if (eject && dev->document) {
dev->cmd_set->eject_document(dev);
}
wait_limit_seconds = 3;
}
if (is_testing_mode()) {
return;
}
dev->interface->sleep_ms(100);
if (check_stop) {
for (unsigned i = 0; i < wait_limit_seconds * 10; i++) {
if (scanner_is_motor_stopped(*dev)) {
return;
}
dev->interface->sleep_ms(100);
}
throw SaneException(SANE_STATUS_IO_ERROR, "could not stop motor");
}
}
// Send the stop scan command
void CommandSetGl646::end_scan(Genesys_Device* dev, Genesys_Register_Set* reg,
bool check_stop) const
{
end_scan_impl(dev, reg, check_stop, false);
}
/**
* parks head
* @param dev scanner's device
* @param wait_until_home true if the function waits until head parked
*/
void CommandSetGl646::move_back_home(Genesys_Device* dev, bool wait_until_home) const
{
DBG_HELPER_ARGS(dbg, "wait_until_home = %d\n", wait_until_home);
int i;
int loop = 0;
auto status = scanner_read_status(*dev);
if (status.is_at_home) {
DBG(DBG_info, "%s: end since already at home\n", __func__);
dev->set_head_pos_zero(ScanHeadId::PRIMARY);
return;
}
/* stop motor if needed */
if (status.is_motor_enabled) {
gl646_stop_motor(dev);
dev->interface->sleep_ms(200);
}
/* when scanhead is moving then wait until scanhead stops or timeout */
DBG(DBG_info, "%s: ensuring that motor is off\n", __func__);
for (i = 400; i > 0; i--) {
// do not wait longer than 40 seconds, count down to get i = 0 when busy
status = scanner_read_status(*dev);
if (!status.is_motor_enabled && status.is_at_home) {
DBG(DBG_info, "%s: already at home and not moving\n", __func__);
dev->set_head_pos_zero(ScanHeadId::PRIMARY);
return;
}
if (!status.is_motor_enabled) {
break;
}
dev->interface->sleep_ms(100);
}
if (!i) /* the loop counted down to 0, scanner still is busy */
{
dev->set_head_pos_unknown(ScanHeadId::PRIMARY | ScanHeadId::SECONDARY);
throw SaneException(SANE_STATUS_DEVICE_BUSY, "motor is still on: device busy");
}
// setup for a backward scan of 65535 steps, with no actual data reading
auto resolution = sanei_genesys_get_lowest_dpi(dev);
const auto& sensor = sanei_genesys_find_sensor(dev, resolution, 3,
dev->model->default_method);
ScanSession session;
session.params.xres = resolution;
session.params.yres = resolution;
session.params.startx = 0;
session.params.starty = 65535;
session.params.pixels = 600;
session.params.lines = 1;
session.params.depth = 8;
session.params.channels = 3;
session.params.scan_method = dev->model->default_method;
session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::REVERSE |
ScanFlag::AUTO_GO_HOME |
ScanFlag::DISABLE_GAMMA;
if (dev->model->default_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, sensor);
init_regs_for_scan_session(dev, sensor, &dev->reg, session);
/* backward , no actual data scanned TODO more setup flags to avoid this register manipulations ? */
regs_set_optical_off(dev->model->asic_type, dev->reg);
// sets frontend
gl646_set_fe(dev, sensor, AFE_SET, resolution);
/* write scan registers */
try {
dev->interface->write_registers(dev->reg);
} catch (...) {
DBG(DBG_error, "%s: failed to bulk write registers\n", __func__);
}
/* registers are restored to an iddl state, give up if no head to park */
if (dev->model->is_sheetfed) {
return;
}
// starts scan
{
// this is effectively the same as dev->cmd_set->begin_scan(dev, sensor, &dev->reg, true);
// except that we don't modify the head position calculations
// FIXME: SEQUENTIAL not really needed in this case
Genesys_Register_Set scan_local_reg(Genesys_Register_Set::SEQUENTIAL);
scan_local_reg.init_reg(0x03, dev->reg.get8(0x03));
scan_local_reg.init_reg(0x01, dev->reg.get8(0x01) | REG_0x01_SCAN);
scan_local_reg.init_reg(0x0f, 0x01);
dev->interface->write_registers(scan_local_reg);
}
if (is_testing_mode()) {
dev->interface->test_checkpoint("move_back_home");
dev->set_head_pos_zero(ScanHeadId::PRIMARY);
return;
}
/* loop until head parked */
if (wait_until_home)
{
while (loop < 300) /* do not wait longer then 30 seconds */
{
auto status = scanner_read_status(*dev);
if (status.is_at_home) {
DBG(DBG_info, "%s: reached home position\n", __func__);
dev->interface->sleep_ms(500);
dev->set_head_pos_zero(ScanHeadId::PRIMARY);
return;
}
dev->interface->sleep_ms(100);
++loop;
}
// when we come here then the scanner needed too much time for this, so we better
// stop the motor
catch_all_exceptions(__func__, [&](){ gl646_stop_motor (dev); });
catch_all_exceptions(__func__, [&](){ end_scan_impl(dev, &dev->reg, true, false); });
dev->set_head_pos_unknown(ScanHeadId::PRIMARY | ScanHeadId::SECONDARY);
throw SaneException(SANE_STATUS_IO_ERROR, "timeout while waiting for scanhead to go home");
}
DBG(DBG_info, "%s: scanhead is still moving\n", __func__);
}
/**
* init registers for shading calibration
* we assume that scanner's head is on an area suiting shading calibration.
* We scan a full scan width area by the shading line number for the device
*/
void CommandSetGl646::init_regs_for_shading(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set& regs) const
{
DBG_HELPER(dbg);
(void) regs;
/* fill settings for scan : always a color scan */
int channels = 3;
unsigned cksel = get_cksel(dev->model->sensor_id, dev->settings.xres, channels);
unsigned resolution = sensor.get_optical_resolution() / cksel;
// FIXME: we select wrong calibration sensor
const auto& calib_sensor = sanei_genesys_find_sensor(dev, dev->settings.xres, channels,
dev->settings.scan_method);
auto pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;
unsigned calib_lines =
static_cast<unsigned>(dev->model->y_size_calib_mm * resolution / MM_PER_INCH);
ScanSession session;
session.params.xres = resolution;
session.params.yres = resolution;
session.params.startx = 0;
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = calib_lines;
session.params.depth = 16;
session.params.channels = channels;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
session.params.color_filter = dev->settings.color_filter;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::DISABLE_SHADING |
ScanFlag::DISABLE_GAMMA |
ScanFlag::IGNORE_COLOR_OFFSET |
ScanFlag::IGNORE_STAGGER_OFFSET;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, calib_sensor);
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
dev->calib_session = session;
/* no shading */
dev->reg.find_reg(0x02).value |= REG_0x02_ACDCDIS; /* ease backtracking */
dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;
sanei_genesys_set_motor_power(dev->reg, false);
}
bool CommandSetGl646::needs_home_before_init_regs_for_scan(Genesys_Device* dev) const
{
return dev->is_head_pos_known(ScanHeadId::PRIMARY) &&
dev->head_pos(ScanHeadId::PRIMARY) &&
dev->settings.scan_method == ScanMethod::FLATBED;
}
/**
* this function send gamma table to ASIC
*/
void CommandSetGl646::send_gamma_table(Genesys_Device* dev, const Genesys_Sensor& sensor) const
{
DBG_HELPER(dbg);
int size;
int address;
int bits;
if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
size = 16384;
bits = 14;
}
else
{
size = 4096;
bits = 12;
}
// allocate temporary gamma tables: 16 bits words, 3 channels */
std::vector<std::uint8_t> gamma(size * 2 * 3);
sanei_genesys_generate_gamma_buffer(dev, sensor, bits, size-1, size, gamma.data());
/* table address */
switch (dev->reg.find_reg(0x05).value >> 6)
{
case 0: /* 600 dpi */
address = 0x09000;
break;
case 1: /* 1200 dpi */
address = 0x11000;
break;
case 2: /* 2400 dpi */
address = 0x20000;
break;
default:
throw SaneException("invalid dpi");
}
dev->interface->write_buffer(0x3c, address, gamma.data(), size * 2 * 3);
}
/** @brief this function does the led calibration.
* this function does the led calibration by scanning one line of the calibration
* area below scanner's top on white strip. The scope of this function is
* currently limited to the XP200
*/
SensorExposure CommandSetGl646::led_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set& regs) const
{
DBG_HELPER(dbg);
(void) regs;
unsigned int i, j;
int val;
int avg[3], avga, avge;
int turn;
std::uint16_t expr, expg, expb;
unsigned channels = dev->settings.get_channels();
ScanColorMode scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
if (dev->settings.scan_mode != ScanColorMode::COLOR_SINGLE_PASS) {
scan_mode = ScanColorMode::GRAY;
}
// offset calibration is always done in color mode
unsigned pixels = dev->model->x_size_calib_mm * sensor.full_resolution / MM_PER_INCH;
ScanSession session;
session.params.xres = sensor.full_resolution;
session.params.yres = sensor.full_resolution;
session.params.startx = 0;
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = 1;
session.params.depth = 16;
session.params.channels = channels;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = scan_mode;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::DISABLE_SHADING;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, sensor);
// colors * bytes_per_color * scan lines
unsigned total_size = pixels * channels * 2 * 1;
std::vector<std::uint8_t> line(total_size);
/*
we try to get equal bright leds here:
loop:
average per color
adjust exposure times
*/
expr = sensor.exposure.red;
expg = sensor.exposure.green;
expb = sensor.exposure.blue;
turn = 0;
auto calib_sensor = sensor;
bool acceptable = false;
do {
calib_sensor.exposure.red = expr;
calib_sensor.exposure.green = expg;
calib_sensor.exposure.blue = expb;
DBG(DBG_info, "%s: starting first line reading\n", __func__);
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, line, "led_calibration");
if (is_testing_mode()) {
return calib_sensor.exposure;
}
if (dbg_log_image_data()) {
char fn[30];
std::snprintf(fn, 30, "gl646_led_%02d.tiff", turn);
write_tiff_file(fn, line.data(), 16, channels, pixels, 1);
}
acceptable = true;
for (j = 0; j < channels; j++)
{
avg[j] = 0;
for (i = 0; i < pixels; i++) {
if (dev->model->is_cis) {
val = line[i * 2 + j * 2 * pixels + 1] * 256 + line[i * 2 + j * 2 * pixels];
} else {
val = line[i * 2 * channels + 2 * j + 1] * 256 + line[i * 2 * channels + 2 * j];
}
avg[j] += val;
}
avg[j] /= pixels;
}
DBG(DBG_info, "%s: average: %d,%d,%d\n", __func__, avg[0], avg[1], avg[2]);
acceptable = true;
if (!acceptable)
{
avga = (avg[0] + avg[1] + avg[2]) / 3;
expr = (expr * avga) / avg[0];
expg = (expg * avga) / avg[1];
expb = (expb * avga) / avg[2];
/* keep exposure time in a working window */
avge = (expr + expg + expb) / 3;
if (avge > 0x2000)
{
expr = (expr * 0x2000) / avge;
expg = (expg * 0x2000) / avge;
expb = (expb * 0x2000) / avge;
}
if (avge < 0x400)
{
expr = (expr * 0x400) / avge;
expg = (expg * 0x400) / avge;
expb = (expb * 0x400) / avge;
}
}
turn++;
}
while (!acceptable && turn < 100);
DBG(DBG_info,"%s: acceptable exposure: 0x%04x,0x%04x,0x%04x\n", __func__, expr, expg, expb);
// BUG: we don't store the result of the last iteration to the sensor
return calib_sensor.exposure;
}
/**
* average dark pixels of a scan
*/
static int dark_average(std::uint8_t * data, unsigned int pixels, unsigned int lines,
unsigned int channels, unsigned int black)
{
unsigned int i, j, k, average, count;
unsigned int avg[3];
std::uint8_t val;
/* computes average value on black margin */
for (k = 0; k < channels; k++)
{
avg[k] = 0;
count = 0;
for (i = 0; i < lines; i++)
{
for (j = 0; j < black; j++)
{
val = data[i * channels * pixels + j + k];
avg[k] += val;
count++;
}
}
if (count)
avg[k] /= count;
DBG(DBG_info, "%s: avg[%d] = %d\n", __func__, k, avg[k]);
}
average = 0;
for (i = 0; i < channels; i++)
average += avg[i];
average /= channels;
DBG(DBG_info, "%s: average = %d\n", __func__, average);
return average;
}
/** @brief calibration for AD frontend devices
* we do simple scan until all black_pixels are higher than 0,
* raising offset at each turn.
*/
static void ad_fe_offset_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor)
{
DBG_HELPER(dbg);
(void) sensor;
unsigned int channels;
int pass = 0;
unsigned adr, min;
unsigned int bottom, black_pixels;
channels = 3;
// FIXME: maybe reuse `sensor`
const auto& calib_sensor = sanei_genesys_find_sensor(dev, sensor.full_resolution, 3,
ScanMethod::FLATBED);
black_pixels = (calib_sensor.black_pixels * sensor.full_resolution) / calib_sensor.full_resolution;
unsigned pixels = dev->model->x_size_calib_mm * sensor.full_resolution / MM_PER_INCH;
unsigned lines = CALIBRATION_LINES;
if (dev->model->is_cis) {
lines = ((lines + 2) / 3) * 3;
}
ScanSession session;
session.params.xres = sensor.full_resolution;
session.params.yres = sensor.full_resolution;
session.params.startx = 0;
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = lines;
session.params.depth = 8;
session.params.channels = 3;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::DISABLE_SHADING;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, calib_sensor);
/* scan first line of data with no gain */
dev->frontend.set_gain(0, 0);
dev->frontend.set_gain(1, 0);
dev->frontend.set_gain(2, 0);
std::vector<std::uint8_t> line;
/* scan with no move */
bottom = 1;
do
{
pass++;
dev->frontend.set_offset(0, bottom);
dev->frontend.set_offset(1, bottom);
dev->frontend.set_offset(2, bottom);
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, line, "ad_fe_offset_calibration");
if (is_testing_mode()) {
return;
}
if (dbg_log_image_data()) {
char title[30];
std::snprintf(title, 30, "gl646_offset%03d.tiff", static_cast<int>(bottom));
write_tiff_file(title, line.data(), 8, channels, pixels, lines);
}
min = 0;
for (unsigned y = 0; y < lines; y++) {
for (unsigned x = 0; x < black_pixels; x++) {
adr = (x + y * pixels) * channels;
if (line[adr] > min)
min = line[adr];
if (line[adr + 1] > min)
min = line[adr + 1];
if (line[adr + 2] > min)
min = line[adr + 2];
}
}
DBG(DBG_info, "%s: pass=%d, min=%d\n", __func__, pass, min);
bottom++;
}
while (pass < 128 && min == 0);
if (pass == 128)
{
throw SaneException(SANE_STATUS_INVAL, "failed to find correct offset");
}
DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__,
dev->frontend.get_offset(0),
dev->frontend.get_offset(1),
dev->frontend.get_offset(2));
}
/**
* This function does the offset calibration by scanning one line of the calibration
* area below scanner's top. There is a black margin and the remaining is white.
* genesys_search_start() must have been called so that the offsets and margins
* are already known.
* @param dev scanner's device
*/
void CommandSetGl646::offset_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set& regs) const
{
DBG_HELPER(dbg);
(void) regs;
int pass = 0, avg;
int topavg, bottomavg;
int top, bottom, black_pixels;
if (dev->model->adc_id == AdcId::AD_XP200) {
ad_fe_offset_calibration(dev, sensor);
return;
}
/* setup for a RGB scan, one full sensor's width line */
/* resolution is the one from the final scan */
unsigned resolution = dev->settings.xres;
unsigned channels = 3;
const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, channels,
ScanMethod::FLATBED);
black_pixels = (calib_sensor.black_pixels * resolution) / calib_sensor.full_resolution;
unsigned pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;
unsigned lines = CALIBRATION_LINES;
if (dev->model->is_cis) {
lines = ((lines + 2) / 3) * 3;
}
ScanSession session;
session.params.xres = resolution;
session.params.yres = resolution;
session.params.startx = 0;
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = lines;
session.params.depth = 8;
session.params.channels = channels;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::DISABLE_SHADING;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, sensor);
/* scan first line of data with no gain, but with offset from
* last calibration */
dev->frontend.set_gain(0, 0);
dev->frontend.set_gain(1, 0);
dev->frontend.set_gain(2, 0);
/* scan with no move */
bottom = 90;
dev->frontend.set_offset(0, bottom);
dev->frontend.set_offset(1, bottom);
dev->frontend.set_offset(2, bottom);
std::vector<std::uint8_t> first_line, second_line;
dev->cmd_set->init_regs_for_scan_session(dev, sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, first_line, "offset_first_line");
if (dbg_log_image_data()) {
char title[30];
std::snprintf(title, 30, "gl646_offset%03d.tiff", bottom);
write_tiff_file(title, first_line.data(), 8, channels, pixels, lines);
}
bottomavg = dark_average(first_line.data(), pixels, lines, channels, black_pixels);
DBG(DBG_info, "%s: bottom avg=%d\n", __func__, bottomavg);
/* now top value */
top = 231;
dev->frontend.set_offset(0, top);
dev->frontend.set_offset(1, top);
dev->frontend.set_offset(2, top);
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, second_line, "offset_second_line");
if (dbg_log_image_data()) {
char title[30];
std::snprintf(title, 30, "gl646_offset%03d.tiff", top);
write_tiff_file(title, second_line.data(), 8, channels, pixels, lines);
}
topavg = dark_average(second_line.data(), pixels, lines, channels, black_pixels);
DBG(DBG_info, "%s: top avg=%d\n", __func__, topavg);
if (is_testing_mode()) {
return;
}
/* loop until acceptable level */
while ((pass < 32) && (top - bottom > 1))
{
pass++;
/* settings for new scan */
dev->frontend.set_offset(0, (top + bottom) / 2);
dev->frontend.set_offset(1, (top + bottom) / 2);
dev->frontend.set_offset(2, (top + bottom) / 2);
// scan with no move
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, second_line,
"offset_calibration_i");
if (dbg_log_image_data()) {
char title[30];
std::snprintf(title, 30, "gl646_offset%03d.tiff", dev->frontend.get_offset(1));
write_tiff_file(title, second_line.data(), 8, channels, pixels, lines);
}
avg = dark_average(second_line.data(), pixels, lines, channels, black_pixels);
DBG(DBG_info, "%s: avg=%d offset=%d\n", __func__, avg, dev->frontend.get_offset(1));
/* compute new boundaries */
if (topavg == avg)
{
topavg = avg;
top = dev->frontend.get_offset(1);
}
else
{
bottomavg = avg;
bottom = dev->frontend.get_offset(1);
}
}
DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__,
dev->frontend.get_offset(0),
dev->frontend.get_offset(1),
dev->frontend.get_offset(2));
}
/**
* Alternative coarse gain calibration
* this on uses the settings from offset_calibration. First scan moves so
* we can go to calibration area for XPA.
* @param dev device for scan
* @param dpi resolutnio to calibrate at
*/
void CommandSetGl646::coarse_gain_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set& regs, int dpi) const
{
DBG_HELPER(dbg);
(void) dpi;
(void) sensor;
(void) regs;
float average[3];
char title[32];
/* setup for a RGB scan, one full sensor's width line */
/* resolution is the one from the final scan */
unsigned channels = 3;
// BUG: the following comment is incorrect
// we are searching a sensor resolution */
const auto& calib_sensor = sanei_genesys_find_sensor(dev, dev->settings.xres, channels,
ScanMethod::FLATBED);
unsigned pixels = 0;
float start = 0;
if (dev->settings.scan_method == ScanMethod::FLATBED) {
pixels = dev->model->x_size_calib_mm * dev->settings.xres / MM_PER_INCH;
} else {
start = dev->model->x_offset_ta;
pixels = static_cast<unsigned>(
(dev->model->x_size_ta * dev->settings.xres) / MM_PER_INCH);
}
unsigned lines = CALIBRATION_LINES;
// round up to multiple of 3 in case of CIS scanner
if (dev->model->is_cis) {
lines = ((lines + 2) / 3) * 3;
}
start = static_cast<float>((start * dev->settings.xres) / MM_PER_INCH);
ScanSession session;
session.params.xres = dev->settings.xres;
session.params.yres = dev->settings.xres;
session.params.startx = static_cast<unsigned>(start);
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = lines;
session.params.depth = 8;
session.params.channels = channels;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = dev->settings.contrast;
session.params.brightness_adjustment = dev->settings.brightness;
session.params.flags = ScanFlag::DISABLE_SHADING;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, calib_sensor);
/* start gain value */
dev->frontend.set_gain(0, 1);
dev->frontend.set_gain(1, 1);
dev->frontend.set_gain(2, 1);
average[0] = 0;
average[1] = 0;
average[2] = 0;
unsigned pass = 0;
std::vector<std::uint8_t> line;
/* loop until each channel raises to acceptable level */
while (((average[0] < calib_sensor.gain_white_ref) ||
(average[1] < calib_sensor.gain_white_ref) ||
(average[2] < calib_sensor.gain_white_ref)) && (pass < 30))
{
// scan with no move
dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
simple_scan(dev, calib_sensor, session, false, line, "coarse_gain_calibration");
if (dbg_log_image_data()) {
std::sprintf(title, "gl646_gain%02d.tiff", pass);
write_tiff_file(title, line.data(), 8, channels, pixels, lines);
}
pass++;
// average high level for each channel and compute gain to reach the target code
// we only use the central half of the CCD data
for (unsigned k = 0; k < channels; k++) {
// we find the maximum white value, so we can deduce a threshold
// to average white values
unsigned maximum = 0;
for (unsigned i = 0; i < lines; i++) {
for (unsigned j = 0; j < pixels; j++) {
unsigned val = line[i * channels * pixels + j + k];
maximum = std::max(maximum, val);
}
}
maximum = static_cast<int>(maximum * 0.9);
// computes white average
average[k] = 0;
unsigned count = 0;
for (unsigned i = 0; i < lines; i++) {
for (unsigned j = 0; j < pixels; j++) {
// averaging only white points allow us not to care about dark margins
unsigned val = line[i * channels * pixels + j + k];
if (val > maximum) {
average[k] += val;
count++;
}
}
}
average[k] = average[k] / count;
// adjusts gain for the channel
if (average[k] < calib_sensor.gain_white_ref) {
dev->frontend.set_gain(k, dev->frontend.get_gain(k) + 1);
}
DBG(DBG_info, "%s: channel %d, average = %.2f, gain = %d\n", __func__, k, average[k],
dev->frontend.get_gain(k));
}
}
DBG(DBG_info, "%s: gains=(%d,%d,%d)\n", __func__,
dev->frontend.get_gain(0),
dev->frontend.get_gain(1),
dev->frontend.get_gain(2));
}
/**
* sets up the scanner's register for warming up. We scan 2 lines without moving.
*
*/
void CommandSetGl646::init_regs_for_warmup(Genesys_Device* dev, const Genesys_Sensor& sensor,
Genesys_Register_Set* local_reg) const
{
DBG_HELPER(dbg);
(void) sensor;
dev->frontend = dev->frontend_initial;
unsigned resolution = 300;
const auto& local_sensor = sanei_genesys_find_sensor(dev, resolution, 1,
dev->settings.scan_method);
// set up for a full width 2 lines gray scan without moving
unsigned pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;
ScanSession session;
session.params.xres = resolution;
session.params.yres = resolution;
session.params.startx = 0;
session.params.starty = 0;
session.params.pixels = pixels;
session.params.lines = 2;
session.params.depth = dev->model->bpp_gray_values.front();
session.params.channels = 1;
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = ScanColorMode::GRAY;
session.params.color_filter = ColorFilter::RED;
session.params.contrast_adjustment = 0;
session.params.brightness_adjustment = 0;
session.params.flags = ScanFlag::DISABLE_SHADING |
ScanFlag::DISABLE_GAMMA;
if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, local_sensor);
dev->cmd_set->init_regs_for_scan_session(dev, local_sensor, &dev->reg, session);
/* we are not going to move, so clear these bits */
dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;
/* copy to local_reg */
*local_reg = dev->reg;
/* turn off motor during this scan */
sanei_genesys_set_motor_power(*local_reg, false);
// now registers are ok, write them to scanner
gl646_set_fe(dev, local_sensor, AFE_SET, session.params.xres);
}
/* *
* initialize ASIC : registers, motor tables, and gamma tables
* then ensure scanner's head is at home
* @param dev device description of the scanner to initialize
*/
void CommandSetGl646::init(Genesys_Device* dev) const
{
DBG_INIT();
DBG_HELPER(dbg);
std::uint8_t val = 0;
std::uint32_t addr = 0xdead;
size_t len;
// to detect real power up condition, we write to REG_0x41 with pwrbit set, then read it back.
// When scanner is cold (just replugged) PWRBIT will be set in the returned value
auto status = scanner_read_status(*dev);
if (status.is_replugged) {
DBG(DBG_info, "%s: device is cold\n", __func__);
} else {
DBG(DBG_info, "%s: device is hot\n", __func__);
}
const auto& sensor = sanei_genesys_find_sensor_any(dev);
/* if scanning session hasn't been initialized, set it up */
if (!dev->already_initialized)
{
dev->dark_average_data.clear();
dev->white_average_data.clear();
dev->settings.color_filter = ColorFilter::GREEN;
/* Set default values for registers */
gl646_init_regs (dev);
// Init shading data
sanei_genesys_init_shading_data(dev, sensor,
dev->model->x_size_calib_mm * sensor.full_resolution /
MM_PER_INCH);
dev->initial_regs = dev->reg;
}
// execute physical unit init only if cold
if (status.is_replugged)
{
DBG(DBG_info, "%s: device is cold\n", __func__);
val = 0x04;
dev->interface->get_usb_device().control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER,
VALUE_INIT, INDEX, 1, &val);
// ASIC reset
dev->interface->write_register(0x0e, 0x00);
dev->interface->sleep_ms(100);
// Write initial registers
dev->interface->write_registers(dev->reg);
// send gamma tables if needed
dev->cmd_set->send_gamma_table(dev, sensor);
// Set powersaving(default = 15 minutes)
dev->cmd_set->set_powersaving(dev, 15);
}
// Set analog frontend
gl646_set_fe(dev, sensor, AFE_INIT, 0);
/* GPO enabling for XP200 */
if (dev->model->sensor_id == SensorId::CIS_XP200) {
dev->interface->write_register(0x68, dev->gpo.regs.get_value(0x68));
dev->interface->write_register(0x69, dev->gpo.regs.get_value(0x69));
// enable GPIO
gl646_gpio_output_enable(dev->interface->get_usb_device(), 6);
// writes 0 to GPIO
gl646_gpio_write(dev->interface->get_usb_device(), 0);
// clear GPIO enable
gl646_gpio_output_enable(dev->interface->get_usb_device(), 0);
dev->interface->write_register(0x66, 0x10);
dev->interface->write_register(0x66, 0x00);
dev->interface->write_register(0x66, 0x10);
}
/* MD6471/G2410 and XP200 read/write data from an undocumented memory area which
* is after the second slope table */
if (dev->model->gpio_id != GpioId::HP3670 &&
dev->model->gpio_id != GpioId::HP2400)
{
switch (sensor.full_resolution)
{
case 600:
addr = 0x08200;
break;
case 1200:
addr = 0x10200;
break;
case 2400:
addr = 0x1fa00;
break;
}
sanei_genesys_set_buffer_address(dev, addr);
sanei_usb_set_timeout (2 * 1000);
len = 6;
// for some reason, read fails here for MD6471, HP2300 and XP200 one time out of
// 2 scanimage launches
try {
dev->interface->bulk_read_data(0x45, dev->control, len);
} catch (...) {
dev->interface->bulk_read_data(0x45, dev->control, len);
}
sanei_usb_set_timeout (30 * 1000);
}
else
/* HP2400 and HP3670 case */
{
dev->control[0] = 0x00;
dev->control[1] = 0x00;
dev->control[2] = 0x01;
dev->control[3] = 0x00;
dev->control[4] = 0x00;
dev->control[5] = 0x00;
}
/* ensure head is correctly parked, and check lock */
if (!dev->model->is_sheetfed) {
move_back_home(dev, true);
}
/* here session and device are initialized */
dev->already_initialized = true;
}
static void simple_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
const ScanSession& session, bool move,
std::vector<std::uint8_t>& data, const char* scan_identifier)
{
unsigned lines = session.output_line_count;
if (!dev->model->is_cis) {
lines++;
}
std::size_t size = lines * session.params.pixels;
unsigned bpp = session.params.depth == 16 ? 2 : 1;
size *= bpp * session.params.channels;
data.clear();
data.resize(size);
// initialize frontend
gl646_set_fe(dev, sensor, AFE_SET, session.params.xres);
// no watch dog for simple scan
dev->reg.find_reg(0x01).value &= ~REG_0x01_DOGENB;
/* one table movement for simple scan */
dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;
if (!move) {
sanei_genesys_set_motor_power(dev->reg, false);
}
/* no automatic go home when using XPA */
if (session.params.scan_method == ScanMethod::TRANSPARENCY) {
dev->reg.find_reg(0x02).value &= ~REG_0x02_AGOHOME;
}
// write scan registers
dev->interface->write_registers(dev->reg);
// starts scan
dev->cmd_set->begin_scan(dev, sensor, &dev->reg, move);
if (is_testing_mode()) {
dev->interface->test_checkpoint(scan_identifier);
return;
}
wait_until_buffer_non_empty(dev, true);
// now we're on target, we can read data
sanei_genesys_read_data_from_scanner(dev, data.data(), size);
/* in case of CIS scanner, we must reorder data */
if (dev->model->is_cis && session.params.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) {
auto pixels_count = session.params.pixels;
std::vector<std::uint8_t> buffer(pixels_count * 3 * bpp);
if (bpp == 1) {
for (unsigned y = 0; y < lines; y++) {
// reorder line
for (unsigned x = 0; x < pixels_count; x++) {
buffer[x * 3] = data[y * pixels_count * 3 + x];
buffer[x * 3 + 1] = data[y * pixels_count * 3 + pixels_count + x];
buffer[x * 3 + 2] = data[y * pixels_count * 3 + 2 * pixels_count + x];
}
// copy line back
std::memcpy(data.data() + pixels_count * 3 * y, buffer.data(), pixels_count * 3);
}
} else {
for (unsigned y = 0; y < lines; y++) {
// reorder line
auto pixels_count = session.params.pixels;
for (unsigned x = 0; x < pixels_count; x++) {
buffer[x * 6] = data[y * pixels_count * 6 + x * 2];
buffer[x * 6 + 1] = data[y * pixels_count * 6 + x * 2 + 1];
buffer[x * 6 + 2] = data[y * pixels_count * 6 + 2 * pixels_count + x * 2];
buffer[x * 6 + 3] = data[y * pixels_count * 6 + 2 * pixels_count + x * 2 + 1];
buffer[x * 6 + 4] = data[y * pixels_count * 6 + 4 * pixels_count + x * 2];
buffer[x * 6 + 5] = data[y * pixels_count * 6 + 4 * pixels_count + x * 2 + 1];
}
// copy line back
std::memcpy(data.data() + pixels_count * 6 * y, buffer.data(),pixels_count * 6);
}
}
}
// end scan , waiting the motor to stop if needed (if moving), but without ejecting doc
end_scan_impl(dev, &dev->reg, true, false);
}
/**
* update the status of the required sensor in the scanner session
* the button fields are used to make events 'sticky'
*/
void CommandSetGl646::update_hardware_sensors(Genesys_Scanner* session) const
{
DBG_HELPER(dbg);
Genesys_Device *dev = session->dev;
std::uint8_t value;
// do what is needed to get a new set of events, but try to not loose any of them.
gl646_gpio_read(dev->interface->get_usb_device(), &value);
DBG(DBG_io, "%s: GPIO=0x%02x\n", __func__, value);
// scan button
if (dev->model->buttons & GENESYS_HAS_SCAN_SW) {
switch (dev->model->gpio_id) {
case GpioId::XP200:
session->buttons[BUTTON_SCAN_SW].write((value & 0x02) != 0);
break;
case GpioId::MD_5345:
session->buttons[BUTTON_SCAN_SW].write(value == 0x16);
break;
case GpioId::HP2300:
session->buttons[BUTTON_SCAN_SW].write(value == 0x6c);
break;
case GpioId::HP3670:
case GpioId::HP2400:
session->buttons[BUTTON_SCAN_SW].write((value & 0x20) == 0);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
// email button
if (dev->model->buttons & GENESYS_HAS_EMAIL_SW) {
switch (dev->model->gpio_id) {
case GpioId::MD_5345:
session->buttons[BUTTON_EMAIL_SW].write(value == 0x12);
break;
case GpioId::HP3670:
case GpioId::HP2400:
session->buttons[BUTTON_EMAIL_SW].write((value & 0x08) == 0);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
// copy button
if (dev->model->buttons & GENESYS_HAS_COPY_SW) {
switch (dev->model->gpio_id) {
case GpioId::MD_5345:
session->buttons[BUTTON_COPY_SW].write(value == 0x11);
break;
case GpioId::HP2300:
session->buttons[BUTTON_COPY_SW].write(value == 0x5c);
break;
case GpioId::HP3670:
case GpioId::HP2400:
session->buttons[BUTTON_COPY_SW].write((value & 0x10) == 0);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
// power button
if (dev->model->buttons & GENESYS_HAS_POWER_SW) {
switch (dev->model->gpio_id) {
case GpioId::MD_5345:
session->buttons[BUTTON_POWER_SW].write(value == 0x14);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
// ocr button
if (dev->model->buttons & GENESYS_HAS_OCR_SW) {
switch (dev->model->gpio_id) {
case GpioId::MD_5345:
session->buttons[BUTTON_OCR_SW].write(value == 0x13);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
// document detection
if (dev->model->buttons & GENESYS_HAS_PAGE_LOADED_SW) {
switch (dev->model->gpio_id) {
case GpioId::XP200:
session->buttons[BUTTON_PAGE_LOADED_SW].write((value & 0x04) != 0);
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
/* XPA detection */
if (dev->model->has_method(ScanMethod::TRANSPARENCY)) {
switch (dev->model->gpio_id) {
case GpioId::HP3670:
case GpioId::HP2400:
/* test if XPA is plugged-in */
if ((value & 0x40) == 0) {
session->opt[OPT_SOURCE].cap &= ~SANE_CAP_INACTIVE;
} else {
session->opt[OPT_SOURCE].cap |= SANE_CAP_INACTIVE;
}
break;
default:
throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
}
}
}
void CommandSetGl646::update_home_sensor_gpio(Genesys_Device& dev) const
{
DBG_HELPER(dbg);
(void) dev;
}
static void write_control(Genesys_Device* dev, const Genesys_Sensor& sensor, int resolution)
{
DBG_HELPER(dbg);
std::uint8_t control[4];
std::uint32_t addr = 0xdead;
/* 2300 does not write to 'control' */
if (dev->model->motor_id == MotorId::HP2300) {
return;
}
/* MD6471/G2410/HP2300 and XP200 read/write data from an undocumented memory area which
* is after the second slope table */
switch (sensor.full_resolution)
{
case 600:
addr = 0x08200;
break;
case 1200:
addr = 0x10200;
break;
case 2400:
addr = 0x1fa00;
break;
default:
throw SaneException("failed to compute control address");
}
/* XP200 sets dpi, what other scanner put is unknown yet */
switch (dev->model->motor_id)
{
case MotorId::XP200:
/* we put scan's dpi, not motor one */
control[0] = resolution & 0xff;
control[1] = (resolution >> 8) & 0xff;
control[2] = dev->control[4];
control[3] = dev->control[5];
break;
case MotorId::HP3670:
case MotorId::HP2400:
case MotorId::MD_5345:
default:
control[0] = dev->control[2];
control[1] = dev->control[3];
control[2] = dev->control[4];
control[3] = dev->control[5];
break;
}
dev->interface->write_buffer(0x3c, addr, control, 4);
}
void CommandSetGl646::wait_for_motor_stop(Genesys_Device* dev) const
{
(void) dev;
}
void CommandSetGl646::send_shading_data(Genesys_Device* dev, const Genesys_Sensor& sensor,
std::uint8_t* data, int size) const
{
(void) dev;
(void) sensor;
(void) data;
(void) size;
throw SaneException("not implemented");
}
ScanSession CommandSetGl646::calculate_scan_session(const Genesys_Device* dev,
const Genesys_Sensor& sensor,
const Genesys_Settings& settings) const
{
// compute distance to move
float move = 0;
if (!dev->model->is_sheetfed) {
move = dev->model->y_offset;
// add tl_y to base movement
}
move += settings.tl_y;
if (move < 0) {
DBG(DBG_error, "%s: overriding negative move value %f\n", __func__, move);
move = 0;
}
move = static_cast<float>((move * dev->motor.base_ydpi) / MM_PER_INCH);
float start = settings.tl_x;
if (settings.scan_method == ScanMethod::FLATBED) {
start += dev->model->x_offset;
} else {
start += dev->model->x_offset_ta;
}
start = static_cast<float>((start * settings.xres) / MM_PER_INCH);
ScanSession session;
session.params.xres = settings.xres;
session.params.yres = settings.yres;
session.params.startx = static_cast<unsigned>(start);
session.params.starty = static_cast<unsigned>(move);
session.params.pixels = settings.pixels;
session.params.requested_pixels = settings.requested_pixels;
session.params.lines = settings.lines;
session.params.depth = settings.depth;
session.params.channels = settings.get_channels();
session.params.scan_method = dev->settings.scan_method;
session.params.scan_mode = settings.scan_mode;
session.params.color_filter = settings.color_filter;
session.params.contrast_adjustment = settings.contrast;
session.params.brightness_adjustment = settings.brightness;
session.params.flags = ScanFlag::AUTO_GO_HOME;
if (settings.scan_method == ScanMethod::TRANSPARENCY) {
session.params.flags |= ScanFlag::USE_XPA;
}
compute_session(dev, session, sensor);
return session;
}
void CommandSetGl646::asic_boot(Genesys_Device *dev, bool cold) const
{
(void) dev;
(void) cold;
throw SaneException("not implemented");
}
} // namespace gl646
} // namespace genesys
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik